Standard Motor W1C01 TPMS User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2019610
Application ID	AV/aP0a7ifNGjGHBgcq45g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.69kB (321185 bits)
Date Submitted	2013-07-18 00:00:00
Date Available	2013-07-18 00:00:00
Creation Date	2013-04-22 11:27:07
Document Lastmod	2013-06-26 10:32:13
Document Title	Users Manual

l -TPM Sensor 2 — Seal 3 - Nut 4 — Cap
Figure 1
WARNING
Read and review all instructions, illustrations and warnings if included
or follow manufacturer recommended service and replacement
procedures before installing.
Professional Installation Only. Improper installation may result in the
failure of the motor vehicle Tire Pressure
Monitoring System {”TPMS”) Sensor to operate properly.
REMOVAL
1) The tire and wheel assembly removal must be followed as outlined in
the vehicle manufacturer's Service Manual.
INSTALLATION
Part assembly sequence is shown in Figure 1.
1) Insert the valve portion of the TPM sensor in the valve hole until
contact is made between seal and wheel rim.
2) When the valve is completely inserted, maintain the sensor contact
with the wheel rim and manually screw the nut for a few turns.
3) While maintaining the sensor and valve in position, engage the
socket on the nut and run the nut down to a torque of 8.0 Nm [71in—
lbs].
4) The sensor is correctly mounted according to the following criteria:
Seal is pressed against the outer surface of the wheel rim‘s hole.
Sensor housing is positioned against the rim's drop well and
contacting at least in one point.
Sensor housing should not exceed the rim’s hump height.
5) The tire and wheel assem bly installation must be followed as
outlined in the vehicle manufacturer‘s Service Manual.
FCC and IC Notice
This device complies with Part 15 of the FCC Rules and with 855-210 of
industry Canada. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Any changes or modifications in construction of this device
which are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Le manuel d'utilisation des appareiis radio exempts de licence doit contenir
l'énoncé qui suit, on l'équivalent, a un endroit bien en vue et/ou sur les
appareils :
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
meme si le brouillage est susceptible d'en compromettre le fonctionnement.
GF10327-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2013:06:26 10:32:13+08:00
Create Date                     : 2013:04:22 11:27:07+08:00
Metadata Date                   : 2013:06:26 10:32:13+08:00
Format                          : application/pdf
Document ID                     : uuid:978b182c-9c97-4cef-8bde-c1e8bdb0c440
Instance ID                     : uuid:67420119-10e2-4ef8-94ff-db770368ff63
Page Count                      : 1

EXIF Metadata provided by EXIF.tools