Stanley Security 2018 Commercial Hardware Price Book
User Manual: Stanley Security 2018 Stanley Commercial Hardware Price Book Price Book
Open the PDF directly: View PDF 
.
Page Count: 116 [warning: Documents this large are best viewed by clicking the View PDF Link!]
Commercial
Hardware
PRICE LIST 67CH
EFFECTIVE: JANUARY 1, 2018
PRICE LIST 67CH | EFFECTIVE: JANUARY 1, 2018
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
2
Terms and Conditions of SaleTable of Contents
General Information
Terms & Conditions 3-4
Warranty 5
EL Warranty 6
STANLEY Masterkey Code and
Master Key Service Policy 7-9
Return Order Request 109
Return Authorizations 110-111
Fulllment Issues 111
Quoting & Ordering 107-108
Purchase Order 112-113
Keying System Summary 114-115
Cylinders Keys & Keying
Keying Options 10
Key Blanks 11
Cut Keys 12
Uncombinated SFIC Cores & Key Blanks 13
Cylinder Options 14
Cylinder Parts 15-16
Mortise Locksets - Grade 1
QMS100/QME100 Series 17-24
QML100 Series 25-27
Cylindrical Locksets - Grade 1
QCL100 Series 28-33
Cylindrical Locksets - Grade 2
QCL200 Series 34-38
Interconnected Levers
QCI200 Series 39-44
Tubular Locksets
QTL200 Series 45-49
Auxiliary Deadbolts - Grade 1
QDB100 Series 50-54
Auxiliary Deadbolts - Grade 2
QDB200 Series 55-61
Exit Devices & Trims - Heavy Duty
QED100 Series 62-64, 67-70
QRM100 Series 71-72
QET100 Series 73-74, 77
Exit Devices & Trims - Narrow Stile
QED200 Series 65-70
QET200 Series 75-77
Exit Devices & Trims - Standard Duty
QED300 Series 78-83
QRM300 Series 84-85
QET300 Series 86-87
QRT300 Series 88-91
Door Closers - Extra Heavy Duty
QDC100 Series 92-95
Door Closers - Heavy Duty
QDC200 Series 96-98
Door Closers - Standard Duty
QDC300 Series 99-101
Index
Weights & Measurements 102-106
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
33
Terms and Conditions of Sale
Price List 67CHPrice List 67CH
The terms and conditions contained herein shall govern the sale of all
Stanley products located in the Stanley price catalog and/or offered for sale
by Stanley Security Solutions, Inc., except for those products as set forth
under separate Stanley Value Added Reseller Agreements. The acceptance
of any order is expressly made conditional upon your assent to these Terms
and Conditions of Sale.
PRICES: Stanley reserves the right, in its sole discretion, to change
or amend its price list (including, but not limited to, adding or removing
Products from the price list), and standard terms and conditions of sale
as contained in its catalogs, price list or published sales policies, without
incurring any liability whatsoever to its Customer or others. All orders will
be lled at the Stanley List Price in effect at the time of order placement. All
prices are subject to change without notice and are not guaranteed.
TAXES: List prices do not include federal, state or local taxes.
ORDERS: No order for Products shall be deemed to have been accepted
by Stanley until written notice of its acceptance is received by the Customer
from Stanley via an order acknowledgement. Stanley reserves the right, in
its sole discretion, to decline to accept any order. Purchase Orders will bind
Stanley only to the extent accepted by Stanley’s written conrmation or
delivery.
Stanley will attempt to ll orders in the order in which they are received,
subject to prior orders. However, Stanley reserves the right to allocate orders
or ll an order or orders ahead of prior orders, if, in its judgment, the facts
warrant such a change.
Any additional provisions in a Purchase Order, including any pre-printed
terms, shall be void and not binding on Stanley, unless expressly accepted by
Stanley. For greater certainty, the acceptance by Stanley of a Purchase Order
shall not be deemed acceptance of the additional terms of such Purchase
Order.
Stanley will accept orders via phone, email, fax or courier. Stanley will send
out an order acknowledgement for all orders received via email, phone or
fax.
Note: Receipt or possession of this price catalog does not grant approval
to quote or purchase Stanley products. Please contact your Stanley Sales
Representative for further details.
KEYING SYSTEM ORDERS: All orders of keying systems
specifying delayed fulllment must be fullled within twelve (12) months
of the order date. Said request for fulllment must include complete keying
instructions for the order to be acknowledged with an estimated delivery
date. Failure to properly request fulllment of the order within twelve (12)
months of the order date will make the order void and nonrefundable.
SPECIAL ORDERS: Any modication to a standard product
conguration is considered a special order. No credits will be issued for
returned special orders unless authorized by Stanley Customer Service.
INCOMPLETE ORDERS: An incomplete order is one that is not fully
specied according to the appropriate nomenclature required for that
product. Any incomplete order will not be entered and will be referred to the
appropriate Stanley Sales Representative for resolution.
SAMPLES: Please contact your local Stanley Sales Representative for
sample requests.
MINIMUM CHARGE: The expense of handling an order necessitates a
minimum charge of $50.00 net per invoice.
CREDIT LIMITS: Stanley’s policy is to extend Net 30-day terms/open
account combined with a credit line based on nancial capacity. For
all accounts Stanley requires a Credit Application and Sales Tax Exempt
Certicate (if applicable). Stanley evaluates traditional sources of credit
information: D&B, trade and bank references, nancial information, and
business plans. The supply of credit herein shall be at the discretion of Stanley.
If available information and/or nancial circumstances will not support open
accounts terms, Stanley offers Cash in Advance and Credit Card (MasterCard
or VISA) terms. Stanley performs periodic reviews of credit lines and terms of
payment and may request updated nancial information.
Stanley reserves the right to withhold delivery of Product if Customer does
not meet Stanley’s credit requirements for the amount of Product ordered,
or the amount of Product which remains unpaid (whether or not overdue)
exceeds the limit established by Stanley for Customer. Customer shall
provide, at Stanley’s request, an acceptable letter of credit or guarantee or
security in a form and amount determined by Stanley.
If Customer shall become overdue on its account or otherwise defaults in
any payment to Stanley or if its nancial condition shall at any time appear
inadequate to warranty further shipment on an open account basis, Stanley
shall have the right, without liability, to refuse to accept any or all orders, to
cancel any and all orders, to delay shipments, or to require advance payment
before accepting or shipping any orders. All orders and all shipments are
subject to approval by the Stanley Credit Department.
PAYMENT TERMS: Stanley standard payment terms are 2% 15, net 30
days from date of invoice.
Effective September 28, 2014, a $45.00 convenience fee will apply to all
payments made by Credit Card towards open invoices on your account. You
may choose to pay by credit card by reaching out to your Credit Analyst
directly in order to process payment. You can avoid paying the $45.00
convenience fee by enrolling and paying open invoices via Billtrust Invoice
Gateway (https://secure.billtrust.com/stanleymechanical/ig/signin) with
an ACH Payment (bank transfer from checking or savings account) free
of charge. Payments by check, or money order should continue to be sent
directly to the remit-to address noted on invoices.
Stanley shall be entitled to charge and Customer shall pay interest on overdue
invoices at the rate of two percent (2%) per month calculated from the date
of the invoice to the date of payment, including any attorney fees incurred
by Stanley resulting from the collection of such overdue payment. Customer
shall pay all sums owing to Stanley without any deduction or abatement and
Customer shall have no right of set-off.
In the event that Customer disputes any portion of the payment due,
Customer shall be obligated to pay the balance which is not the subject of
dispute.
Without limiting any other rights it may have under these terms of sale and
applicable law, all of Stanley’s obligations under this Agreement, including
obligations of supply, or any Purchase Order, can be suspended or cancelled
should Customer be delinquent in making payment for previously shipped
Products.
October 2015
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
4
4
Terms and Conditions of Sale
Price List 67CHPrice List 67CH
INTERNATIONAL SALES:
International Resellers located outside of the United States of America
who place orders are subject to and must pay by (1) Cash in Advance, (2)
Conrmed Irrevocable Letter of Credit, (3) Standby Letter of Credit.
All international shipments shall be FCA (Incoterms 2010) from Stanley’s
facility in Indianapolis, Indiana USA. Stanley shall be deemed to have
delivered all Products and related goods when such are put in the custody
of a carrier at Stanley’s plant or warehouse above, at which time all title and
risk of loss or damage shall pass to Customer.
SHIPPING/FREIGHT: All Products shall be shipped FOB Origin
domestic or FCA International (INCOTERMS 2010) from Stanley’s facility in
Indianapolis, Indiana USA. Stanley shall be deemed to have delivered all
Products and related goods when such are put in the custody of a carrier
at Stanley’s plant or warehouse above, at which time all title, risk of loss or
damage shall pass to Customer. All shipments will be made in accordance
with the preferred routing, carrier assignments, and operational guidelines
of Stanley. Customer shall bear all costs of freight, insurance and associated
costs and shall make all arrangements for same.
Single or combined shipments including Stanley lock sets, exit devices,
hinges and door closers will be considered for free freight with orders at or
above $5000 net (product combination must be on same purchase order).
Orders less than $5,000 will be shipped freight prepaid with shipping cost
added to the invoice, including a nominal freight charge to be determined
by Stanley at time of shipping.
Hinge only orders will be considered for free fright with orders at or above
$750 net. Orders less than $750 will be shipped freight prepaid with
shipping cost added to the invoice, including a nominal freight charge to be
determined by Stanley at time of shipping.
These freight terms apply only to a single destination within the contiguous
United States.
Should a shipment qualify for one of Stanley’s free freight programs, the
Products shall be shipped FOB Origin domestic (with exception to prepaid
freight) or FCA International (INCOTERMS 2010) (with exception to prepaid
freight) from Stanley’s facility in Indianapolis, Indiana USA.
DELIVERY: Orders shall be acknowledged and given a scheduled delivery
date based on estimated manufacturing lead times. Manufacturing lead
time will begin once all information is received to process an order. Delivery
dates given by Stanley as part of order acknowledgment for accepted orders
for Products or related goods will be honored by Stanley on a best effort
basis. Shipping dates shown on order acknowledgments are based upon
Stanley’s estimate and cannot be guaranteed. Stanley will not be liable for
any loss or damage resulting from delay in lling orders, including any direct
or consequential loss or damage. Stanley reserves the right to make partial
shipments unless the order species otherwise.
CHANGES/CANCELLATIONS: After orders are entered for
manufacturing, changes or cancellations cannot be accepted without
Stanley written permission, and may be subject to a change or cancellation
charge equivalent to 30% of the purchase price.
Orders for special and/or custom designed goods not immediately saleable
to another customer are not changeable, cancelable, or returnable.
RETURNED GOODS: Stanley Customer Service MUST authorize all
warranty and non-warranty related returns. Requests for returns can be
initiated by submitting an email to BAS-rgacreditgrp.us@dormakaba.com.
Only goods with an invoice date of less than one (1) year will be considered
for a non-warranty related return and product must be returned in original
packaging and in a resalable condition. All material returned to Stanley,
regardless of the reason, must have a correct RA number applied to the
outside of the shipping carton. A restocking charge of 30% of the purchase
price will be applied to the Customer’s account except for warranty returns.
Transportation charges of returned goods must be prepaid by Customer. All
goods must be returned within sixty (60) calendar days of RA issue date.
Product not returned in salable condition or after sixty (60) days of the RA
issue date is subject to disposal by Stanley with no credit issued.
Stanley cannot authorize the return of discontinued product. Under no
circumstances will special order items be accepted for return, unless covered
by warranty.
EXPORT REGULATIONS: Customer agrees to conform to, and abide
by, the export laws and regulations of the US, including, but not limited to,
the Export Administration Act of 1979 as amended and its implementing
regulations. Diversion contrary to US laws and regulations is prohibited.
MASTERKEYING: Stanley Masterkey Code and Masterkey Service Policy
can be found at www.bestaccess.com.
LIMITED WARRANTY: The terms and conditions outlined above
are subject to Stanley’s Limited Warranty, which is included in the Stanley
Price Catalog and is incorporated herein by reference. Upon return of a
defective product, Stanley shall either repair or replace the product, in its
sole discretion, in accordance with our standard warranty
EXCEPT AS SET FORTH HEREIN, STANLEY MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, AND BUYER ACKNOWLEDGES THAT NO
REPRESENTATIONS, WARRANTIES, PROMISES OR STATEMENTS HAVE
BEEN MADE BY STANLEY, WITH RESPECT TO THIS PRODUCT, OR ANY
PART OR PORTION THEREOF. IN ADDITION, STANLEY MAKES NO
WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ANY PART OR
PORTION THEREOF, FOR ANY PURPOSE, NOR ANY WARRANTY WHICH
EXTENDS BEYOND THE DESCRIPTION ON THE FACE HEREOF. STANLEY
SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES SUFFERED BY BUYER OR ANYONE CLAIMING
BY, THROUGH OR UNDER BUYER, AS A RESULT OF THE CONDITION
OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF, AND THERE
ARE NO ORAL OR WRITTEN UNDERTAKINGS OR AGREEMENTS OF
ANY TYPE PROVIDED BY STANLEY EXCEPT AS EXPRESSLY SET FORTH
HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE.
GOVERNING LAW: These Terms and Conditions of Sale and any
subsequent sales agreements between Stanley and Customer shall be
construed in accordance with the laws of the State of Indiana. The United
Nations Convention on Contracts for the International Sale of Goods shall
not apply to this Agreement.
October 2015
5
STANLEY Commercial Hardware
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030 Price List 66CH
Rev. Date October 2015
What is Covered: Stanley Security Solutions, Inc. (“Stanley”) warrants that the Products manufactured by Stanley, identified below, and sold under its
trade name “STANLEY COMMERCIAL HARDWARE”are free of defects in materials and workmanship as outlined below. The sole and exclusive
liability of Stanley under this warranty is limited to the repair or replacement of any Product or component part covered by the warranty at the sole
discretion of Stanley.
Who is Covered: This warranty is extended only to Stanley’s distributors of Products and the end user who purchases Products for purposes other
than resale (collectively, “Purchaser”).
Hardware Warranty Period:
QCL Cylindrical Lock,QTL Tubular Lock,QMS/QME/QML Mortise Lock,QCI Inter connected Lock,QDB Auxiliary Deadbolt,QDC Door
Closers,QED Exit Devices,QET/QRT Exit Trim, and QRM Mullions shall have the following warranty periods:
•Mechanical products warranty term shall be limited lifetime for a period of the useful life of the building in which the products are originally
installed.
•Electrical products shall be warranted for one (1) year from the date of sale.
6CS and 7CS products shall have the following warranty period:
•Three (3) years from the date of sale.
Finishes shall be warranted for three (3) years from the date of sale excluding US10B/613 “Oil Rubbed Bronze” finish.
Warranty Claims: Any Products believed to be defective as covered by this warranty may not be returned without prior written Returned Materials
Authorization (RMA) from Stanley Product Support (800) 392-5209 covering specific items and quantities within thirty (30) days from the discovery of
the alleged defect(s). Stanley will inform the purchaser where to ship said Product(s), shipping charges prepaid by you, for examination. In the event
such examination reveals a defect covered by this warranty; Stanley will, at its sole option, repair or replace the Product, and return it or its
replacement to the purchaser, with charges only for shipping.
Exclusions: This warranty specifically excludes, and Stanley shall not be held responsible for the following:
a) COSTS ASSOCIATED WITH INSTALLING, REMOVING OR REINSTALLATION OF THE PRODUCT.
b) Damage caused by Product malfunction or failure attributable to acts of God.
c) Improper use or installation.
d) Poor or no maintenance.
e) Work performed by someone other than an Authorized Stanley technician.
f) Failure to follow Stanley’s operating instructions or environmental specifications.
g) Incorrect application, modification, vandalism, erosion or corrosion, shipping and/or handling, improper storage, accident, misuse, abuse or
any other cause not within the control of Stanley.
h) This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the
alleged defect. All modifications are made at the risk and expense of the party making the modifications.
i) Stanley shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or
others without Stanley’s prior written approval.
j) Stanley provides no warranty or guarantee that its cores and/or cylinders will function properly or be mechanically compatible with products
not manufactured by Stanley.
k) Scratches, abrasion, deterioration due to the use of paints, solvents and other chemicals.
l) The US10B/613 finish is considered to be a living finish that will change over time with use and age and is expressly excluded from this
warranty. The finish changes that occur are indicative of normal wear and tear and reflect the essence of a living finish. The finish changes
are not considered manufacturing defects and are not covered by this warranty.
Third Party Warranty: Except as otherwise provided above, Stanley makes no warranty, express or implied, with regard to third party hardware or
software and expressly disclaims the implied warranties or conditions of merchantability or merchantable quality, fitness for a particular purpose, title,
infringement and those arising by statute or otherwise in law. Customer’s sole recourse for warranty claims is with the manufacturer of the Product.
However, Stanley agrees to pass through any third party warranty that Stanley receives from the manufacturer of the Products to Purchaser. The
extent of any third party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise
accompanying the Products.
LIMITATION OF WARRANTIES: THIS WARRANTY IS GIVEN EXPRESSLY AND IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO
UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS, OR WARRANTIES NOT SPECIFIED HEREIN.
STANLEY SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
SUFFERED BY PURCHASER OR ANYONE CLAIMING BY, THROUGH OR UNDER PURCHASER, AS A RESULT OF THE CONDITION OF THIS
PRODUCT, OR ANY PART OR PORTION THEREOF.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR
STATE.
THIS WARRANTY IS GOVERNED BY THE LAW OF THE STATE OF INDIANA WITHOUT REGARD TO ITS CONFLICTS OF LAW PRINCIPLES.
STANLEY AND PURCHASER AGREE THAT THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF
GOODS SHALL NOT APPLY TO SALE OF THE PRODUCTS COVERED BY THIS WARRANTY.
WARRANTY
STANLEY Commercial Hardware
6
STANLEY Commercial Hardware
6
Rev. Date October 2015
What is Covered: Stanley Security Solutions, Inc.(“Stanley”) warrants that the QEL Series Electronic Locks manufactured by Stanley and sold
under its trade name “Stanley Commercial Hardware™” are free of defects in materials and workmanship as outlined below. The sole and exclusive
liability of Stanley under this warranty is limited to the repair or replacement of any Product or component part covered by the warranty at the sole
discretion of Stanley.
Who is Covered: This warranty is extended only to the Seller’s distributors of Products and the end user who purchases Products for purposes other
than resale (collectively, “Purchaser”).
Hardware Warranty Period:
•QEL Series Electronic Lock mechanical warranty term shall be two (2) years from the date ofsale.
•QEL Series Electronic Lock electrical warranty term shall be one (1) year from the date of sale.
•Finishes shall be warranted for three (3) years from the date of sale excluding US10B/613 “Oil Rubbed Bronze” finish.
Warranty Claims: Any Products believed to be defective as covered by this warranty may not be returned without prior written Returned Materials
Authorization (RMA) from Stanley Customer Service (800) 392-5209 covering specific items and quantities within thirty (30) days from the discovery of
the alleged defect(s). Stanley will inform the purchaser where to ship said Product(s), shipping charges prepaid by you, for examination. In the event
such examination reveals a defect covered by this warranty; Stanley will, at its sole option, repair or replace the Product, and return it or its
replacement to the purchaser, with charges only for shipping.
Exclusions: This warranty specifically excludes, and Stanley shall not be held responsible for the following:
a) COSTS ASSOCIATED WITH INSTALLING, REMOVING OR REINSTALLATION OF THE PRODUCT.
b) Damage caused by Product malfunction or failure attributable to acts of God.
c) Improper use or installation.
d) Poor or no maintenance.
e) Work performed by someone other than an Authorized Stanley technician.
f) Failure to follow Stanley’s operating instructions or environmental specifications.
g) Incorrect application, modification, vandalism, erosion or corrosion, shipping and/or handling, improper storage, accident, misuse, abuse or
any other cause not within the control of Stanley.
h) This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes or contributes to the
alleged defect. All modifications are made at the risk and expense of the party making the modifications.
i) Stanley shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or
others without Stanley’s prior written approval.
j) Stanley provides no warranty or guarantee that its cores and/or cylinders will function properly or be mechanically compatible with products
not manufactured by Stanley.
k) Scratches, abrasion, deterioration due to the use of paints, solvents and other chemicals.
l) The US10B/613 finish is considered to be a living finish that will change over time with use and age and is expressly excluded from this
warranty. The finish changes that occur are indicative of normal wear and tear and reflect the essence of a living finish. The finish changes
are not considered manufacturing defects and are not covered by this warranty.
Third Party Warranty: Except as otherwise provided above, Stanley makes no warranty, express or implied, with regard to third party hardware or
software and expressly disclaims the implied warranties or conditions of merchantability or merchantable quality, fitness for a particular purpose, title,
infringement and those arising by statute or otherwise in law. Customer’s sole recourse for warranty claims is with the manufacturer of the Product.
However, Stanley agrees to pass through any third party warranty that Stanley receives from the manufacturer of the Products to Purchaser. The
extent of any third party warranty details, terms and conditions, remedies and procedures may be expressly stated on, or packaged with, or otherwise
accompanying the Products.
LIMITATION OF WARRANTIES: THIS WARRANTY IS GIVEN EXPRESSLY AND IN PLACE OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO
UNDERSTANDINGS, AGREEMENTS, REPRESENTATIONS, OR WARRANTIES NOT SPECIFIED HEREIN.
STANLEY SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
SUFFERED BY PURCHASER OR ANYONE CLAIMING BY, THROUGH OR UNDER PURCHASER, AS A RESULT OF THE CONDITION OF THIS
PRODUCT, OR ANY PART OR PORTION THEREOF.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR
STATE.
THIS WARRANTY IS GOVERNED BY THE LAW OF THE STATE OF INDIANA WITHOUT REGARD TO ITS CONFLICTS OF LAW PRINCIPLES.
STANLEY AND PURCHASER AGREE THAT THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF
GOODS SHALL NOT APPLY TO SALE OF THE PRODUCTS COVERED BY THIS WARRANTY.
WARRANTY
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030 Price List 66CHPrice List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
7
STANLEY Commercial Hardware
Price List 67CH
I. DISTRIBUTOR MASTERKEY SERVICES
All Stanley Authorized Distributors, Aftermarket Wholesalers, and
Locksmiths (“Authorized Distributors”) can create, modify or extend
masterkey codes for the benet of their end user customers (‘End Users”)
for Stanley non-patented masterkey systems; provided, however, the
services must be performed in line with industry standards. With the
express written permission of Stanley, select Authorized Distributors
can create, modify or extend masterkey codes for the benet of End
Users for a Stanley Patented Masterkey System (pursuant to the terms
and conditions of Section C below). Authorized Distributor’s failure to
comply with the terms of this policy could result in Stanley’s termination
of its Distributor Agreement as well as Stanley’s pursuit of any remedies
available at law.
A. END USER INFORMATION AND CODE RELEASE:
All masterkey codes (both patented and non-patented)
previously generated by Stanley are available for distribution
to End Users (and/or their designated Authorized Distributor, if
applicable) via the End User Web Portal at http://customerservice.
stanleysecuritysolutions.com/mcp/. For a hard copy of the End User
Information and Code Release Form, please contact your Stanley
End User Consultant. End user codes will be distributed solely
to those Authorized Distributors (a) identied by the End User on
a fully executed End User Information and Code Release Form
received by Stanley, and (b) for the release of Stanley Patented
Masterkey Codes, the Authorized Distributor is authorized by
Stanley to receive and process Stanley Patented Masterkey Codes
(as more fully described in Section C below.) No exceptions will be
made to this policy.
B. STANLEY NON-PATENTED MASTERKEY SYSTEM
Effective September 4, 2012 Stanley will no longer require a
Security Authorization Form to be signed by the End User prior
to Stanley and/or its Authorized Distributor accepting core and
key orders for non-patented keying systems. All valid End User
communications for orders related to non-patented keying systems
will be fullled at the End User’s liability.
C. STANLEY PATENTED MASTERKEY SYSTEM
The Stanley Patented Masterkey System provides a higher level of
protection against unauthorized key duplication and crossovers
and, in order to maintain the quality of a Stanley Patented
Masterkey System, the following terms and conditions of this
policy shall apply to any and all Authorized Distributors with
access to Stanley Patented Masterkey Systems. For the purpose
of this policy, “Stanley Patented Product” shall mean the Stanley
Best Cormax (including cores and keys), as well as any and all
future product Stanley designates as patented product for the
purpose of this policy. “Stanley Patented Masterkey Systems”
and “Stanley Patented Masterkey Codes” shall mean the
respective masterkey system or codes of any Stanley Patented
Masterkey Product.
Sale of Stanley Patented Product: As further described in this
C, only those Authorized Distributors meeting certain necessary
qualications and standards shall be selected by Stanley to sell
Stanley Patented Product. Selection shall be at the sole discretion
of Stanley and shall be evidenced in writing via the Distributor
Agreement or its select addendums.
Stanley Patented Security Authorization Form: It is a
responsibility of the Authorized Distributor to ensure that Stanley
Patented Product does not end up in the possession of unauthorized
individuals or entities. The Authorized Distributor must ensure that
the End User completes a Stanley Patented Masterkey System
Security Authorization Form (the “Security Authorization Form”) as
outlined in this Section. The Security Authorization Form designates
those individuals within the End User’s organization that are
authorized to place orders with the Authorized Distributor for
Stanley Patented Product. The Security Authorization Form must be
completed and signed by the End User.
It is the Authorized Distributor’s full responsibility to validate the
End User’s signature as identied on the Security Authorization
Form prior to accepting any orders for Stanley Patented Product.
In certain circumstances the Authorized Distributor selling the
Stanley Patented Product will not contract directly with the End
User. In these circumstances, the Authorized Distributor is required
to work with its reseller to ultimately ensure that the End User
submits a signed Security Authorization Form to Stanley.
Stanley shall have the right to audit all Security Authorization
Forms maintained by the Authorized Distributors for completeness,
accuracy and compliance with this Policy.
Sale of Combinated Stanley Patented Product through
Distributor: Stanley may authorize select Authorized Distributor
to purchase and resell to an End User Stanley Patented Product
that has been combinated by Stanley Personnel. In this instance,
a Security Authorization Form must be completed and signed by
the End User and provided by the Authorized Distributor to Stanley
with each Stanley Patented Product order.
STANLEY MASTERKEY CODE AND MASTERKEY SERVICE POLICY
October 2015
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
8
Price List 67CH
STANLEY MASTERKEY CODE AND MASTERKEY SERVICE POLICY (continued)
Stocking of Stanley Patented Product: Stanley may
authorize select Authorized Distributors to purchase and stock
Stanley Patented Product and have access to Stanley Patented
Masterkey Codes by entering into a Stanley Patented Masterkey
System Distributor Agreement Addendum (the “Authorized
Stocking Distributor”) As a condition to the Authorized Stocking
Distributor’s continued access to Stanley Patented Masterkey
Codes, it must comply at all times with the Stanley Patented Key
Systems Security Procedure. In addition, it is the responsibility of
the Authorized Stocking Distributor to ensure that they have a
completed Security Authorization Form on le for each End User
that places an order with the Authorized Stocking Distributor
for Stanley Patented product and that the Authorized Stocking
Distributor authenticates the signature of each Stanley Patented
Product order utilizing the Security Authorization Form.
Stanley Patented Masterkey Code Generation: To assist
in reducing the possibility of duplication within a keying system
and ensure security, all Stanley Patented Masterkey Codes must
be created, modied and/or extended by Stanley’s masterkey
personnel and/or an Authorized Stocking Distributor. The
unauthorized duplication or release of Stanley Patented Masterkey
Codes to non-authorized people or organizations, including, but
not limited to, unauthorized distributors, wholesalers, private
locksmiths, other lock manufacturers, architects, or contractors, is a
violation of this policy as well as the infringement of patent rights
and other intellectual property rights of Stanley. In addition to
any other recourse available under law, the unauthorized release
of Stanley Patented Masterkey Codes by any Authorized Stocking
Distributor shall result in immediate termination.
Stanley Patented Masterkey System Exclusive
Keyways: Upon request from an End User to release Stanley
Patented Masterkey Codes previously generated by Stanley that
are on an exclusive keyway, Stanley will send a notication to
the End User reminding them that their patented codes are on an
exclusive keyway. Stanley will provide a copy of this notice to the
Authorized Stocking Distributor.
To assist in reducing the possibility of duplication within an End
User exclusive keying system and ensure security, all exclusive
Stanley Patented Masterkey Codes must be created, modied and/
or extended and recorded in Stanley’s BESTCode masterkey code
management tool.
Should Stanley approve an Authorized Stocking Distributor to
establish a Stanley Patented Masterkey System on an exclusive
keyway, the Authorized Stocking Distributor shall be required
to sign a Stanley Patented Masterkey System Exclusive Keyway
Addendum. To assist in reducing the possibility of duplication
within a Distributor exclusive keying system and ensure security,
all exclusive Stanley Patented Masterkey Codes must be created,
modied and/or extended and recorded in Stanley’s BESTCode
masterkey code management tool
Copies of Stanley Patented Masterkey Codes: Stanley shall have
a right to a copy of all Stanley Patented Masterkey Codes that
have been originated, modied, extended or otherwise maintained
by the Authorized Stocking Distributor in the Stanley BESTCode
system in order for Stanley to be able to provide continued support
either directly, or indirectly, to the End User.
II. STANLEY MASTERKEY SERVICES
A. STANLEY MASTERKEY SERVICES
PROVIDED TO DISTRIBUTOR:
Stanley, upon request and at its sole discretion, may provide
select masterkey services to an Authorized Distributor for both
non-patented masterkey systems and Stanley Patented Masterkey
Systems. In order for an Authorized Distributor to place an order
for the extension of, or modication to, a masterkey system
previously created or maintained by Stanley, the End User must
have selected that Authorized Distributor as its authorized
designee in the End User Information & Code Release Form
received by Stanley. Complete keying instructions must be given
before a Stanley order can be properly acknowledged with an
estimated delivery date. Stanley reserves the right to charge for
the service of a customized masterkey security solution with the
purchase of a Stanley product. A masterkey service charge will be
assessed for each order for cylinders or cores for use in non-Stanley
manufactured locks for which Stanley has an equivalent product.
Stanley Patented Masterkey System products shall not be provided
without the associated masterkey services being provided by
Stanley. All Masterkey Services provided by Stanley shall be subject
to the terms and conditions of the Stanley Masterkey Service Order
Acknowledgment which shall be provided upon acceptance of the
order for Masterkey Services.
October 2015
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
99
Electronic Lock 9
Price List 67CHPrice List 67CH
B. STANLEY BESTCODE:
Stanley may, in its sole discretion, make available its BESTCode
masterkey code management tool to select Authorized Distributors
that meet certain training and certication requirements. If offered,
BESTCode will be made available for an annual subscription fee as
outlined in the Stanley pricing catalog. All codes made available
to Authorized Distributors in the BESTCode system shall be subject
to the BESTCode User License Agreement and will be provided
in accordance with this Policy. The BESTCode masterkey code
management tool is not available for use with Stanley Commercial
Hardware products.
III. FORMS
For a copy of the following forms please contact the Stanley End
User Consultant.
• End User Information and Code Release Agreement
• Stanley Patented Masterkey System Distributor
Agreement Addendum (Exhibit B)
• Stanley Patented Masterkey System Security Authorization Form
• Stanley Patented Key Systems Security Procedure
• Stanley Patented Masterkey System Exclusive Keyway Addendum
• Stanley Patented Masterkey System End User Specic Distributor
Agreement Addendum (Exhibit D)
Stanley reserves the right to change, modify or update this Policy
at any time, in its sole discretion.
STANLEY MASTERKEY CODE AND MASTERKEY SERVICE POLICY
October 2015
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
10
Keying Guide | Keying Options | Key Stamping
KEYING OPTIONS
KEY STAMPING OPTIONS
- Maximum Characters: Keys - 6
Cylinder Face - 4
CKC Cylinders - 6
Order Description Qty
KD Keyed Dierent 1
KA Keyed Alike 1
MK Master Keyed (One Level Only) 1
CK Construction Keyed (AKA as Protecto Keying) 1
CMK Construction & Master Keyed 1
MAIS Maison Keyed / Cross Keyed 1
GMK Grand Master Keyed 1
GGMK Great Grand Master Keyed 1
Order Description Qty
VCK0 No bitting or keyset stamping on keys 1
VCK1 Visual Key Stamping (Keys Only) 1
VCK2 Special Key Stamping (Other than standard symbols) 1
VCK3 Visual Key Control (Cylinder Face Only - Levers and Deadbolts) 1
VCK4 Visual Key Control (Keys & Cylinder Face) 1
DND Keys stamped with “Do Not Duplicate” 1
CKC2 Concealed Key Control (Cylinders & VKC Keys) 1
CKC3 Concealed Key Control (Cylinders Only) 1
Keying OptionsKeying Options Price List 67CH
List Price
NC
NC
16.00
16.00
16.00
16.00
16.00
16.00
List Price
NC
NC
6.30
6.30
11.00
NC
11.00
11.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
11
Keying Guide | Key Blanks
KEY BLANKS (SOLD IN QUANTITIES OF 50)
* Key blanks sold in quantities of 50.
Description Each Service Part #
6-PIN KEY BLANKS
Kwikset KW 6-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1KW16
Weiser WE 6-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1WE16
Schlage SC 6-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1SC16
Sargent LA 6-Pin Blank (Ilco Standard Bow) 1 6AQ1LA16
Yale GA 6-Pin Blank (Ilco Standard Bow) 1 6AQ1GA16
STANLEY BF 6-Pin Blank (Ilco Bow, Do Not Duplicate) 1 6AQ1BF16DND
Kwikset KW 6-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1KW16DND
Weiser WE 6-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1WE16DND
Schlage SC 6-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1SC16DND
5-PIN KEY BLANKS
Kwikset KW 5-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1KW15
Kwikset KW 5-Pin Blank for QDB288 Control Cylinder 1 6AQ2KW15
Weiser WE 5-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1WE15
Schlage SC 5-Pin Blank (STANLEY Bow, Embossed One Side) 1 6AQ1SC15
Kwikset KW 5-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1KW15DND
Weiser WE 5-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1WE15DND
Schlage SC 5-Pin Blank (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1SC15DND
Key Blanks & CoresKey Blanks
Price List 67CH
List Price
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
12
Keying Guide | Cut Keys
CUT KEYS
* All cut keys require specication of keyway and key combination.
* When being ordered separate from product Master Keys, Top Level Masters, and Do Not Duplicate Keys require Signature Authority.
* Builder key orders get 10 builder keys at no charge.
* Master key orders get 1 master key at no charge.
Description Qty Part #
6-PIN CUT KEYS
STANLEY BF 6-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1BF26
STANLEY BF 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3BF26
Kwikset KW 6-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1KW26
Kwikset KW 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3KW26
Weiser WE 6-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1WE26
Weiser WE 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3WE26
Schlage SC 6-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1SC26
Schlage SC 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3SC26
Sargent LA 6-Pin Cut Key (Ilco Standard Bow) 1 6AQ1LA26
Sargent LA 6-Pin Cut Key (Ilco Standard Bow, Master Key) 1 6AQ3LA26
Yale GA 6-Pin Cut Key (Ilco Standard Bow) 1 6AQ1GA26
Yale GA 6-Pin Cut Key (Ilco Standard Bow, Master Key) 1 6AQ3GA26
STANLEY BF 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1BF26DND
Kwikset KW 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1KW26DND
Weiser WE 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1WE26DND
Schlage SC 6-Pin Cut Key (STANLEY Bow, Embossed One Side, Do Not Duplicate) 1 6AQ1SC26DND
5-PIN CUT KEYS
Kwikset KW 5-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1KW25
Kwikset KW 5-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3KW25
Kwikset KW 5-Pin Cut Key for QDB288 Control Cylinder 1 6AQ2KW25
Weiser WE 5-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1WE25
Weiser WE 5-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3WE25
Schlage SC 5-Pin Cut Key (STANLEY Bow, Embossed One Side) 1 6AQ1SC25
Schlage SC 5-Pin Cut Key (STANLEY Bow, Embossed One Side, Master Key) 1 6AQ3SC25
Cut Keys Price List 67CH
List Price
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
5.80
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
13
Keying Guide | Key Blanks
How To Order - SFIC Cores
6CS 7 BF 2 626
Core Type Lock Body Keyway Combinating Code Finish List Price
6CS - SFIC 6- 6-pin
7 - 7-pin
BF - BEST F 2 - Combinated 605
626
690
$44.00
Combinated Cores (SFIC)
Uncombinated Cores (SFIC)
6-7 PIN SFIC Key Blanks
How To Order
7AS 1 A 1
Series Key Type Keyway Cut Code Key Stamp Price
7AS - Standard 1 - Blank Designate
specic keyway
(A, D, E, etc.)
1 - Blank KS915 x KS800 – “ DUPLICATION
PROHIBITED” with stars on Front
and a blank back - Standard
$2.30
How To Order
7CS 7 A 1 626
Core Type Lock Body Keyway Combinating Code Finish Price
7CS - SFIC 6 - 6-pin
7 – 7-pin
Designate
specic keyway
(A, D, E, etc.)
1 - Uncombinated 626 – Satin Chrome
606 – Satin Brass
613 – Oil Rubbed Bronze
$28.00
Key Blanks & CoresCores & Keys
NOTES:
Consult factory for lead times.
7CS packaged in mulitples of 50 cores and 7AS packaged in multiples of 100 keys. A 10% broken box service fee applies unless total order
exceeds $5,000.
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
14
Cylinder Guide
How To Order
6EQ D 6 BF 2 626 QDB180 CC
Cylinder Type Cylinder Type Lock Body Keyway Combinating Code Finish Tailpiece Options
6EQ - Standard
Cylinder
L – Key in Lever
D – Deadbolt
5 - 5-pin
6 – 6-pin
KW – Kwikset
WE – Weiser
SC – Schlage C
GA – Yale
LA – Sargent
2 – Combinated
5 – Zero Bitted
606 626 Must
specify
Series/
Function
CC -
Constuction
How To Order
6EQ M 6 KW 2 626 E 118 CC
Cylinder Type Cylinder
Type Lock Body Keyway Combinating Code Finish Cam Length Options
6EQ - Standard
Cylinder
M – Mortise
R – Rim
5 - 5-pin
6 – 6-pin
KW – Kwikset
WE – Weiser
SC – Schlage C
GA – Yale
LA – Sargent
2 – Combinated
5 – Zero Bitted
606 613
626
For Mortise
Cylinders:
M –
Cloverleaf
Cam
E – Straight
Cam
A – Adams
Rite Cam
118 –
1-1/8”
138 –
1-3/8”
CC -
Constuction
Keyway Price with Lock Service Part List Price
KW - Kwikset
NC $55.00
WE - Weiser
SC - Schlage C
GA - Yale
LA - Sargent
Key-in-Lever and Deadbolt Cylinders
Mortise and Rim Cylinders
NOTES:
M – Cloverleaf Cam 1 – 1/8” is standard for QMS/QME/QML
mortise locks. 1 – 3/8” is available for thick doors.
E – Straight Cam 1 – 1/8” is standard for QED exit devices
and QET trims that use mortise cylinders.
Refer to BEST Cylinders (1E) when SFIC mortise cylinders
are required.
For all cylinders, consult factory for lead times.
Cylinder Options
Keyway Price with Lock Service Part List Price
KW - Kwikset
NC $25.00WE - Weiser
SC - Schlage C
GA - Yale NC $53.00
LA - Sargent
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
15
Cylinder Guide | Parts
CYLINDER PARTS
Description Series Service Part
#
Cylinder Locking Pin All 8Q00209
Cylinder Locking Cap All 8Q00210
Cylinder Locking Spring All 8Q00211
Tailpiece QCL1 50/QCL1 70 - Entry/Storeroom QCL100 8Q00069
Tailpiece QCL160 - Classroom (all keyways except KW) QCL100 8Q00070
Tailpiece QCL160 - Classroom (KW keyway only) QCL100 8Q00071
Cylinder Plug Holder QCL100 Series QCL100 8Q00065
Tailpiece QCL250/QCL270/QCI250 - Entry/Storeroom/
Interconnect
QCL200/
QCI200 8Q00072
Tailpiece QCL260 - Classroom QCL200 8Q00074
SFIC Tailpiece QCL200 Series QCL200 8Q00302
Cylinder Plug Holder QCL200 Series QCL200 8Q00066
Tailpiece QCI200 Series Interconnect Deadbolt QCI200 8Q00076
Cylinder PartsKey Blanks & CoresCylinder Parts
Price List 67CH
List Price
1.20
1.80
1.20
2.50
2.50
2.50
1.80
2.50
2.50
2.40
1.80
2.50
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
16
Cylinder Guide | Parts
Description Series Service Part
#
Tailpiece QTL200/QRT300 Series QTL200/QRT300 8Q00073
Cylinder Plug Holder for QTL200 Series - Summit Style QTL200 8Q00067
Cylinder Plug Holder for QTL200 Series - Sierra Style QTL200 8Q00068
Tailpiece QDB100/QDB200 Series Single Cylinder QDB100/QDB200 8Q00083
Tailpiece QDB100/QDB200 Series Double Cylinder (QTY 2) QDB100/QDB200 8Q00085
Thick door kit - Tailpiece for QDB100/QDB200 Series Single
Cylinder (1-3/4” - 2-1/4”) QDB100/QDB200 8Q00084
Cylinder Screw QDB100/QDB200 Series QDB100/QDB200 8Q00086
Standard Cam for Mortise Cylinder Mortise Cylinders 8Q00119
Cam Mounting Screws for Mortise Cylinders (QTY 2) Mortise
Cylinders 8Q00118
Rim Cylinder Tailpiece RimCylinders 8Q00140
Rim Cylinder Tailpiece For Thick Doors RimCylinders 8Q00480
Cloverleaf Mortise Cam for QME/QMS/QML QME, QMS, QML 8Q01084
Adams Rite Cam --- 8Q00571
CYLINDER PARTS (CONTINUED)
Cylinder Parts Price List 67CH
List Price
2.50
2.00
2.00
2.50
2.50
2.50
2.50
4.60
1.50
2.50
2.50
1.80
1.80
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
17
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Example
If you ordered: QME160 E626 BF6 KD
You would get: Grade 1 Classroom Mortise Lock, Sierra Lever Escutcheon Trim, Satin Chrome,
SFIC "F" Keyway, Keyed Dierent.
20 Single Dummy
22 Full Dummy
30 Passage
40 Privacy
45 Privacy w/ Deadbolt
50 Entry
52 Exit
54 Corridor
58 Dormitory
60 Classroom
62 Classroom Security
64 Apartment
70 Storeroom
72 Institutional
74 Store Door
Escutcheon Trim QME1
Sectional Trim QMS1
ESierra
MSummit
ASlate
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
Base Part Number
Series Function Design Finish Keyway # of Pins Keying
QME1 60 E 626 BF 6 KD
Mortise LocksKey Blanks & CoresMortise Locks
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
18
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
NOTES:
Consult factory for lead times on 605 & 625 nishes.
Prices include standard cylinders. Reference cylinder options for complete listing.
Available in: 605, 613, 619,
625, 626
Available in: 605, 613, 619,
625, 626
Sierra (E) Summit (M)
Model/Series Functions Style Cylinders Case Qty
QMS120 Single Dummy E / M / A 4
QMS122 Full Dummy E / M / A 4
QMS130 Passage E / M / A 4
QMS140 Privacy E / M / A 4
QMS145 Privacy w/ Dead bolt E / M / A 4
QMS150 Entry E / M / A Sgl 4
QMS152 Exit E / M / A Sgl 4
QMS154 Corridor E / M / A Sgl 4
QMS158 Dormitory E / M / A Dbl 4
QMS160 Classroom E / M / A Sgl 4
QMS162 Classroom Security E / M / A Dbl 4
QMS164 Apartment E / M / A Dbl 4
QMS170 Storeroom E / M / A Sgl 4
QMS172 Institutional E / M / A Dbl 4
QMS174 Store Door E / M / A Dbl 4
Less Cylinder
LC Less Cylinder
Mortise Locks Price List 67CH
List Price
626 605, 613, 619, 625
140.00 155.00
278.00 293.00
425.00 440.00
430.00 445.00
456.00 471.00
499.00 514.00
499.00 514.00
499.00 514.00
547.00 562.00
499.00 514.00
547.00 562.00
547.00 562.00
499.00 514.00
547.00 562.00
547.00 562.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
19
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Model/Series Functions Style Cylinders Case Qty
QME120 Single Dummy E / M / A 4
QME122 Full Dummy E / M / A 4
QME130 Passage E / M / A 4
QME140 Privacy E / M / A 4
QME145 Privacy w/ Dead bolt E / M / A 4
QME150 Entry E / M / A Sgl 4
QME152 Exit E / M / A Sgl 4
QME154 Corridor E / M / A Sgl 4
QME158 Dormitory E / M / A Dbl 4
QME160 Classroom E / M / A Sgl 4
QME162 Classroom Security E / M / A Dbl 4
QME164 Apartment E / M / A Dbl 4
QME170 Storeroom E / M / A Sgl 4
QME172 Institutional E / M / A Dbl 4
QME174 Store Door E / M / A Dbl 4
NOTES:
Consult factory for lead times on 605 & 625 nishes.
Prices include standard cylinders. Reference cylinder options for complete listing.
Available in: 605, 613, 619,
625, 626
Available in: 605, 613, 619,
625, 626
Sierra (E) Summit (M)
Less Cylinder
LC Less Cylinder
Key Blanks & CoresMortise Locks
Price List 67CH
List Price
626 605, 613, 619, 625
171.00 186.00
340.00 356.00
483.00 499.00
488.00 502.00
514.00 530.00
555.00 571.00
555.00 571.00
555.00 571.00
602.00 617.00
555.00 571.00
602.00 617.00
602.00 617.00
555.00 571.00
602.00 617.00
602.00 617.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
20
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
NOTES:
"-" Additional cylinder spacers not required.
"N/A" Cylinder length not compatible with door thickness.
NOTES:
"-" Additional cylinder spacers not required.
"N/A" Cylinder length not compatible with door thickness.
CYLINDER RING CHART - ESCUTCHEON TRIMS
CYLINDER RING CHART - SECTIONAL TRIMS
Model #
Door
Thick-
ness
Cylin-
der
Length
Guard
Dimen-
sion
Part
Num-
ber
Qty*
Escutcheon
Double
Cylinder
QME158,
QME162,
QME164,
QME172,
QME174
1-3/4”
1” -
1-1/8” N/A
1-1/4” N/A
1-3/8” 1/2” 8Q01086 1
1-1/2” 5/8” 8Q01087 1
2”
1” N/A
1-1/8” -
1-1/4” N/A
1-3/8” N/A
1-1/2” 1/2” 8Q01086 1
2-1/4”
1” N/A
1-1/8” N/A
1-1/4” -
1-3/8” -
1-1/2” N/A
Model #
Door
Thick-
ness
Cylin-
der
Length
Guard
Dimen-
sion
Part
Number Qty*
Escutcheon
Single
Cylinder
QME150,
QME152,
QME154,
QME160,
QME170
1-3/4”
1” -
1-1/8” -
1-1/4” -
1-3/8” 1/2” 8Q01086 1
1-1/2” 1/2” 8Q01086 1
2”
1” N/A
1-1/8” -
1-1/4” -
1-3/8” -
1-1/2” 1/2” 8Q01086 1
2-1/4”
1” N/A
1-1/8” N/A
1-1/4” -
1-3/8” -
1-1/2” -
Model #
Door
Thick-
ness
Cylin-
der
Length
Guard
Dimen-
sion
Part
Num-
ber
Qty*
Sectional
Single
Cylinder
QMS150,
QMS152,
QMS154,
QMS160,
QMS170
1-3/4”
1” -
1-1/8” -
1-1/4” -
1-3/8” 3/16” 8Q01089 1
1-1/2” 5/16” 8Q01090 1
2”
1” N/A
1-1/8” -
1-1/4” -
1-3/8” -
1-1/2” 1/16” 8Q01088 1
2-1/4”
1” N/A
1-1/8” N/A
1-1/4” -
1-3/8” -
1-1/2” -
Model #
Door
Thick-
ness
Cylin-
der
Length
Guard
Dimen-
sion
Part
Num-
ber
Qty*
Sectional
Double
Cylinder
QMS158,
QMS162,
QMS164,
QMS172,
QMS174
1-3/4”
1”
1-1/8” 1/16” 8Q01088 1
1-1/4” 3/16” 8Q01089 1
1-3/8” 5/16” 8Q01090 1
1-1/2” 7/16” 8Q01091 1
2”
1” N/A
1-1/8” -
1-1/4” 1/16” 8Q01088 1
1-3/8” 3/16” 8Q01089 1
1-1/2” 5/16” 8Q01090 1
2-1/4”
1” N/A
1-1/8” N/A
1-1/4” -
1-3/8” 1/16” 8Q01088 1
1-1/2” 3/16” 8Q01089 1
Mortise Locks Price List 67CH
List Price
Double
24.00
28.00
24.00
List Price
Double
16.00
20.00
24.00
28.00
16.00
20.00
24.00
16.00
20.00
List Price
Single
24.00
24.00
24.00
-
-
List Price
Single
20.00
24.00
16.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
21
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Sectional trim kits include interior and exterior trims, screw pack for trim installation and strike dust box. Trim kits are shipped in the standard mortise packaging
allowing mortise cases to be congured for a complete lock.
SECTIONAL TRIM KITS (SPECIFY FINISH WHEN ORDERING)
Model #
Trim Description Order
Part # Qty Master
Carton
Exterior (Secure) Interior Lever Style
QMS130 Lever Lever
E 8Q01093
1 4
M 8Q01094
QMS 140 Lever,
emergency
access plate
Lever,
turnpiece
E 8Q01066
QMS 145 M 8Q01067
QMS150
Lever,
cylinder
collar
Lever
E 8Q01072
QMS 160
QMS 170 M 8Q01073
QMS152 Lever,
cylinder
collar
Lever, turnpiece
E 8Q01070
QMS 154 M 8Q01071
QMS158
Lever, cylinder,
collar
Lever, cylinder,
collar
E 8Q01068QMS 162
QMS 164
QMS 172
M 8Q01069
QMS 174
ALL
Cylinder collar kit
(Includes standard cylinder guard, wave washer
and gap washer)
8Q01016 1 1
ALL Turnpiece assembly
(Requires screw pack 8Q01030) 8Q01014 1 1
Key Blanks & CoresMortise Locks
Price List 67CH
List Price
626 603, 613, 625, 626
280.00 292.00
35.00 41.00
40.00 45.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
22
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Escutcheon trim kits include interior and exterior trims, screw pack for trim installation and strike dust box. Trim kits are shipped in the standard mortise packaging
allowing mortise cases to be congured for a complete lock.
ESCUTCHEON TRIM KITS (SPECIFY FINISH WHEN ORDERING)
Model #
Trim Description Order
Part # Qty Master
Carton
Exterior (Secure) Interior Lever Style
QME130 Lever Lever E 8Q01074
1 4
M 8Q01075
QME140
Lever,
Emergency
Access Hole
Lever,
Turnpiece
E 8Q01076
QME145 M 8Q01077
QME150 E 8Q01082
QME160 Lever,
Cylinder
Hole
Lever M 8Q01083
QME170
QME152 Lever,
Cylinder
Hole
Lever,
Turnpiece
E 8Q01080
QME154 M 8Q01081
QME158
Lever,
Cylinder
Hole
Lever,
Cylinder
Hole
E 8Q01078
QME162
QME164
M 8Q01079QME172
QME174
List Price
626 605, 613, 619, 625
354.00 354.00
Mortise Locks Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
23
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Mortise case kits include case, instruction sheets & template, and case mounting screws.
Armor front kits include a nished armor front and installation screws.
MORTISE CASE KITS
ARMOR FRONT KITS (SPECIFY FINISH WHEN ORDERING)
Model # Case Description Order Part # QTY
QMS/QME130 F1 Passage 8Q01059 1
QMS/QME140 F22 Privacy 8Q01054 1
QMS/QME145 F19 Privacy with Deadbolt 8Q01061
1
QMS/QME150 F4 Entry 8Q01058
QMS/QME152 F13 Exit 8Q01063
QMS/QME154 F20 Corridor 8Q01060
QMS/QME158 F11 Dormitory 8Q01064
QMS/QME160 F5 Classroom 8Q01057
QMS/QME162 F32 Classroom Security 8Q01052
QMS/QME164 F9 Apartment 8Q01055
QMS/QME170 F7 Storeroom 8Q01056
QMS/QME172 F30 Institutional 8Q01053
QMS/QME174 F14 Store Door 8Q01062
Model # Description Order Part # Qty
Latch Deadbolt Auxiliary Toggle
QMS/QME120 8Q01040
1
QMS/QME130 x 8Q01033
QMS/QME140 x
QMS/QME145
x 8Q01043QMS/QME152
QMS/QME174
QMS/QME150 x x x 8Q01042
QMS/QME154 x x x 8Q01032
QMS/QME158
QMS/QME160
x x 8Q01031
QMS/QME162
QMS/QME164
QMS/QME170
QMS/QME172
Key Blanks & CoresMortise Locks
Price List 67CH
List Price
141.00
147.00
170.00
List Price
16.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
24
QMS/QME100 Series | Grade 1 | Heavy Duty Mortise Locks
Strike kits include nished strike and installation screws.
STRIKE KITS (SPECIFY FINISH WHEN ORDERING)
SCREW PACKS AND OTHER PARTS
Part Description Order Part # QTY
Mortise case front bracket (bracket that connects armor front to lock case) 8Q01028 1
Screw pack - Trim only. Specify nish.
(2 - M4x0.7 x 35mm at head machine screws) 8Q01029 1
Screw pack - Turnpiece / Sectional Emergency Plate. Specify nish.
(2 - M4 x 19mm at head machine screws and 2 - #8-32 x 3/4” at head wood screws) 8Q01030 1
Sectional Thick Door Kit - interior lever assembly for 2” - 2-1/4” doors 8Q01044 1
Spanner wrench for sectional lever installation 8Q01046 1
Screw pack - Armor Front. Specify nish.
(2 - 0.7 x 5mm at head machine screws) 8Q01047 1
Screw pack - Mortise Case. 8Q01048 1
Screw pack - Escutcheon Trims (for installation of trims, armor front and strike). Specify nish.
(2 - M4 x 0.7 x 35mm at head machine screws; 2 - #12 x 3/4” dual purpose screws; 2 - M4 x 0.7 x
5mm at head machine screws)
8Q01049 1
Screw pack - Sectional Trims (for installation of trims, armor front and strike). Specify nish.
(2 - M4 x 0.7 x 35mm at head machine screws; 2 - #12 x 3/4” dual purpose screws; 2 - M4 x 0.7 x
5mm at head machine screws; 2 - #8-32 x 3/4” at head wood screws; 2 - M4 x 19mm at head
machine screws; 1 /8” allen wrench)
8Q01050 1
Mortise cam - Cloverleaf (All STANLEY Commercial Hardware Mortise Locks & Deadlocks) 8Q01084 1
Model # Strike Description Order Part # Qty
QMS/QME130
Strike for locks with latch bolt only or latch bolt with auxiliary. 8Q01035
1
QMS/QME140
QMS/QME150
QMS/QME160
QMS/QME162
QMS/QME164
QMS/QME170
QMS/QME172
QMS/QME145
Strike for locks with latch bolt with dead bolt. 8Q01036
QMS/QME152
QMS/QME154
QMS/QME158
QMS/QME174
ALL Strike dust box, black plastic 8Q01045 1
Mortise Locks Price List 67CH
List Price
14.00
6.00
6.00
32.00
6.00
5.40
6.00
14.00
16.00
1.80
List Price
15.00
6.30
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
25
QML100 Series | Grade 1 | Heavy Duty Mortise Locks
Example
If you ordered: QML186 626 RH BF6 KD
You would get: Grade 1 Classroom Mortise Lock, Satin Chrome, Right-Hand,
SFIC "F" Keyway, Keyed Dierent.
80 Single Cylinder
82 Double Cylinder
84 Cylinder Only
86 Classroom
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
QML186 Only*
RH Right Hand
LH Left Hand
Base Part Number
Series Function Finish Handing* Keyway # of Pins Keying
QML1 86 626 RH BF 6 KD
NOTES:
*Classroom function requires handed cylinder turn. Specify handing when ordering.
Key Blanks & Cores
Mortise Locks
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
26
QML100 Series | Grade 1 | Heavy Duty Mortise Locks
NOTES:
*QML100 are special order, consult factory for lead times.
*Classroom function requires handed cylinder turn. Specify handing when ordering. Prices include standard cylinders. Reference cylinder options for
complete listing.
QML 180
Model/Series Functions Case
Qty
QML180 Single Cylinder 10
QML182 Double Cylinder 10
QML184 Cylinder Only 10
QML186* Classroom 10
Mortise Locks Price List 67CH
List Price
626 605, 613, 619, 625
241.00 252.00
271.00 282.00
204.00 204.00
247.00 256.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
27
QML100 Series | Grade 1 | Heavy Duty Mortise Locks
Mortise deadlock kits include case, instruction sheets & template, and case mounting screws.
MORTISE DEADLOCK KITS
Armor front kits include a nished armor front and installation screws.
ARMOR FRONT KITS (SPECIFY FINISH WHEN ORDERING)
Strike kits include nished strike and installation screws.
STRIKE KITS (SPECIFY FINISH WHEN ORDERING)
MISC.
DEADLOCK TRIM KITS (SPECIFY FINISH WHEN ORDERING)
Model # Description Order Part # Qty
ALL QML Mortise deadlock case 8Q01051 1
Model # Description Order Part # Qty
ALL QML Mortise deadlock armor front 8Q01039 1
Model # Description Order Part # Qty
ALL QML Mortise deadlock strike 8Q01034 1
ALL QML Deadlock strike dust box, black plastic 8Q01085 1
Description OrderPart # Qty
Cylinder guard kit (Includes standard cylinder guard, wave washer
and gap washer) 8Q01016 1
Turnpiece assembly (Requires screw pack 8Q01030) 8Q01014 1
Model # Description Order Part # Qty
QML 186 Left hand mortise cylinder thumbturn 8Q01005 1
QML 186 Right hand mortise cylinder thumbturn 8Q01006 1
Key Blanks & CoresMortise Locks
Price List 67CH
List Price
134.00
List Price
11.00
List Price
9.10
5.80
List Price
626 605, 613, 619, 625
35.00 41.00
40.00 45.00
List Price
50.00
50.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
28
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
20 Single Dummy
30 Passage
35 Communicating
40 Privacy
50 Entry/Oce
51 Entry/Oce SFIC
54 Corridor
55 Corridor SFIC
60 Classroom
61 Classroom SFIC
68 Classroom Security
69 Classroom Security SFIC
70 Storeroom
71 Storeroom SFIC
625 Bright Chrome
ESierra
MSummit
ASlate
QCL1 LATCH TABLE
FR4 Radius 2-3/4 with 3/4 throw
FS4 Square 2-3/4 with 3/4 throw
NOL No Latch
R4 Radius 2-3/4
R8 Radius 2-3/8
S4 Square 2-3/4
S5 Square 5
S8 Square 2-3/8
478S ANSI 4 7⁄8" x 11⁄4" Strike
118F ANSI 11⁄8" x 23⁄4" Strike
NOS No Strike
24V 24 Volt AC/DC
12V 12 Volt AC/DC
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QCL171 E626 S4 478S BF6 KA H
You would get: Grade 1 Hurricane Compliant Cylindrical Storeroom Lock, Sierra Lock, Satin Chrome,
2 3⁄4" Deadlatch Square, ANSI 47⁄8" x 11⁄4" Strike, BEST “F” Keyway, Keyed Alike.
Base Part Number
Series Function Design Finish Latch Strike Keyway # Of Pins Keying
QCL1 71 E 626 S4 478S BF 6 KA
Additional Options
Hurricane
Compliant
Power Request
To Exit
2nd
Finish
H — — —
ADDED FUNCTIONS
92 Electronically Locked (fail safe)
93 Electronically Locked SFIC (fail safe)
94 Electronically Unlocked (fail secure)
95 Electronically Unlocked SFIC (fail secure)
Cylindrical Locks Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
29
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
NOTES:
* Privacy split nishes are priced at the highest nish price.
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Sierra (E) Summit (M) Slate (A)
Model/Series Functions Style Case Qty
QCL120 Half Dummy E / M / A 12
QCL130 Passage E / M / A 6
QCL135 Communicating E / M / A 6
QCL140* Privacy E / M / A 6
QCL150 Entrance/Oce E / M / A 6
QCL151 Entrance/Oce SFIC E / M / A 6
QCL154 Corridor E / M / A 6
QCL155 Corridor SFIC E / M / A 6
QCL160 Classroom E / M / A 6
QCL161 Classroom SFIC E / M / A 6
QCL168 Classroom Security E / M / A 6
QCL169 Classroom Security SFIC E / M / A 6
QCL170 Storeroom E / M / A 6
QCL171 Storeroom SFIC E / M / A 6
Options
H Hurricane Compliant
Key Blanks & CoresCylindrical Locks
Price List 67CH
List Price
626 605, 613, 619, 625
123.00 128.00
241.00 251.00
272.00 282.00
291.00 301.00
333.00 343.00
377.00 387.00
333.00 343.00
377.00 387.00
333.00 343.00
377.00 387.00
360.00 370.00
404.00 414.00
333.00 343.00
377.00 387.00
Add
5.20
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
30
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
ELECTRIFIED OPTIONS (CONSULT FACTORY FOR LEAD TIMES)
• Consult Factory for lead times.
• Electrication prices should be added to list price of lock.
• Standard door prep.
• Deadlocking latch.
• Key override allows key to retract latchbolt momentarily on
electronically locked models.
• Inside lever always free for immediate egress.
• Continuous duty solenoids.
• Tie into alarm systems and electromagnetic locks.
• 12V AC/DC with .250 amp current.
24V AC/DC with .150 amp current.
• Specify voltage when ordering.
• Lifetime warranty on lock body; 1 year warranty on
electric components.
• Uses power supply 8Q00314.
• Warranty: 1 Year Electrical.
• Consult Factory for lead times.
• Provides power for fail safe or fail secure locking devices.
• UL listed, US & Canada, Class 2.
• Filtered and regulated 24DC constant voltage.
• 2 AMP load capacity.
• Over voltage/short circuit protection.
• Surge suppression for locking devices.
• Interface relay to isolate the locking device current from
the control switch.
• Auxilliary 24VDC constant voltage for powering stand alone
devices such as keypads, motion detectors, status indicators, etc.
• Field terminal block set at 45° for ease of installation.
• Can power up to 12 24V Cylindrical fail safe/ fail secure levers -
refer to installation manual for additional details.
Electried Product Specications Power Supply Specications
Model # Description
QCL192 Electronically locked (fail safe). Outside lever continuously locked electrically.
Unlocked by key outside, by switch, or by power failure. Inside always free for
immediate egress.
QCL193 (SFIC)
QCL194 Electronically unlocked (fail secure). Outside lever continuously locked until
unlocked by key or electric current. Inside always free for immediate egress.
QCL195(SFIC)
QCL170---X Request to exit. Switch monitors inside lever rotation. Incorporates into alarm
systems or in conjunction with an electromagnet.
QCL171---X(SFIC)
QCL192---X Electronically locked (fail safe) with request to exit. Outside lever continuously
locked electrically. Unlocked by key outside, by switch, or by power failure.
Inside always free for immediate egress. Ability to tie into alarm systems.
QCL193---
X(SCFIC)
QCL194---X Electronically unlocked (fail secure) with request to exit. Outside lever
continuously locked until unlocked by key or electric current. Inside always
free for immediate egress. Ability to tie into alarm systems.
QCL195---
X(SCFIC)
8Q00314 Fail Safe / Fail Secure 24VDC Power Supply
Cylindrical Locks Price List 67CH
List Price
626 605/613/625
680.00 691.00
731.00 743.00
680.00 691.00
731.00 743.00
633.00 646.00
686.00 698.00
929.00 942.00
980.00 994.00
929.00 942.00
980.00 994.00
822.00 822.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
31
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
Order #
With Lock Description Service Part #
1 -1⁄8” X 2 -1⁄4” FACE PLATE, 1” HOUSING DIAMETER, GRADE 1, UL (WIDE FACE)
S4 2 3/4” dead latch - square corner 8Q00172
2 3/4” dead latch - square corner - corridor function 8Q00574
R4 2 3/4” dead latch - radius corner 8Q00171
2 3/4” dead latch - radius corner - corridor function 8Q00573
S8 2 3/8” dead latch - square corner 8Q00174
2 3/8” dead latch - square corner - corridor function 8Q00576
R8 2 3/8” dead latch - radius corner 8Q00173
2 3/8”” dead latch - radius corner - corridor function 8Q00575
S5 5” dead latch - square corner 8Q00175
S4 2 3/4” spring latch privacy - square corner 8Q00177
2 3/4” spring latch passage - square corner 8Q00182
R4 2 3/4” spring latch privacy - radius corner 8Q00176
2 3/4”” spring latch passage - radius corner 8Q00181
S8 2 3/8” spring latch privacy - square corner 8Q00179
2 3/8” spring latch passage - square corner 8Q00184
R8 2 3/8” spring latch privacy - radius corner 8Q00178
2 3/8” spring latch passage - radius corner 8Q00183
S5 5” spring latch privacy - square corner 8Q00180
5” spring latch passage - square corner 8Q00185
1 -1⁄8” X 2 -1⁄4” FACE PLATE, 1” HOUSING DIAMETER, GRADE 1,
3⁄4” THROW, 3 HR UL
FS4 2 3/4” dead latch - square corner, 3/4” throw 8Q00438
FR4 2 3/4” dead latch - radius corner, 3/4” throw 8Q00437
NO LATCH
NOL No Latch
LATCH OPTIONS (SPECIFY FINISH)
Grade 1 -
Deadlatch
Grade 1 -
Springlatch
Key Blanks & CoresCylindrical Locks
Price List 67CH
Price With Lock Service Part List
Price
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
Add 22.00 37.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
NC 13.00
Add 22.00 34.00
Add 22.00 34.00
Add 99.00 111.00
Add 99.00 111.00
Deduct 11.70
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
32
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
STRIKE OPTIONS (SPECIFY FINISH)
Order #
With Lock Description Service Part #
118 F
1 1/8” x 2 3/4” T-Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00165
478S
4 7/8” x 1 1/4” ANSI Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00166
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Cylindrical Locks Price List 67CH
Price
With Lock
Service Part
List Price
NC 4.80
NC 7.60
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
33
QCL100 Series | Grade 1 | Heavy Duty Cylindrical Locks
OTHER PARTS & SCREW PACKS
Description Service Part #
Installation Jig for Cylindrical Levers 8Q00075
Tailpiece QCL150/QCL170 - Entry/Storeroom 8Q00069
Tailpiece QCL160 - Classroom (all keyways except KW) 8Q00070
Tailpiece QCL160 - Classroom (KW keyway only) 8Q00071
Cylinder Plug Holder QCL100 Series 8Q00065
Screw Pack for QCL100 Series Dummy
(Specify nish) 8Q00056
Screw Pack for QCL100 Series
(Specify nish) 8Q00057
Screw Pack for T-Strike
(Specify nish) 8Q00058
Trim Ring for Cylindrical Locks
(Shims Lock o door approximately 1/8”)
(Available in 605, 613, 619, 626)
8Q00221
Key Blanks & CoresCylindrical Locks
Price List 67CH
Service Part
List Price
12.00
2.50
2.50
2.50
1.80
1.80
2.50
1.90
23.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
34
QCL200 Series | Grade 2 | Standard Duty Cylindrical Locks
Example
If you ordered: QCL271 E626 S4 478S BF6 KA H 625
You would get: Grade 2 Hurricane Compliant
Cylindrical Storeroom Lock, Sierra Lever, Satin
Chrome x Bright Chrome, 23
⁄4" Deadlatch Square,
ANSI 47
⁄8" x 11
⁄4" Strike, BEST “F” SFIC Keyway, Keyed Alike.
20 Single Dummy
30 Passage
35 Communicating
40 Privacy
50 Entry/Oce
51 Entry/Oce SFIC
54 Corridor
55 Corridor SFIC
60 Classroom
61 Classroom SFIC
70 Storeroom
71 Storeroom SFIC
ESierra
MSummit
ASlate
613 Oil Rubbed Bronze
625 Bright Chrome
QCL2 LATCH TABLE
FR4 Radius 2-3/4 with 3/4 throw
FS4 Square 2-3/4 with 3/4 throw
NOL No Latch
NR4 Narrow Radius 2-3/4
NR8 Narrow Radius 2-3/8
NS4 Narrow Square 2-3/4
NS8 Narrow Square 2-3/8
R4 Radius 2-3/4
R8 Radius 2-3/8
S3 Square 3-3/4
S4 Square 2-3/4
S5 Square 5
S8 Square 2-3/8
478S ANSI 47⁄8" x 11⁄4" Strike
118F ANSI 11⁄8" x 23⁄4" Strike
FLS Full Lip Square Corner Strike
FLR Full Lip 1⁄4" Radius Corner Strike
NOS No Strike KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA"
LA Sargent “LA”
LC Less Cylinder
Base Part Number
Series Function Design Finish Latch Strike Keyway # of Pins Keying
QCL2 71 E 626 S4 478S BF 6 KA
Additional Options
Hurricane
Compliant
2nd
Finish
H 625
Cylindrical Locks Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
35
QCL200 Series | Grade 2 | Standard Duty Cylindrical Locks
NOTES:
* Privacy split nishes are priced at the highest nish price.
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625, 626x613*
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625, 626x613*
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625, 626x613*
Sierra (E) Summit (M) Slate (A)
Model / Series Functions Style Case Qty
QCL220 Half Dummy E / M / A 12
QCL230 Passage E / M / A 6
QCL235 Communicating E / M / A 6
QCL240* Privacy E / M / A 6
QCL250 Entrance/Oce E / M / A 6
QCL251 Entrance/Oce SFIC E / M / A 6
QCL254 Corridor E / M / A 6
QCL255 Corridor SFIC E / M / A 6
QCL260 Classroom E / M / A 6
QCL261 Classroom SFIC E / M / A 6
QCL270 Storeroom E / M / A 6
QCL271 Storeroom SFIC E / M / A 6
Options
H Hurricane Compliant
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Key Blanks & CoresCylindrical Locks
Price List 67CH
Add
5.00
List Price
626 605, 613, 619, 625
66.00 71.00
134.00 144.00
143.00 153.00
143.00 153.00
169.00 179.00
213.00 223.00
169.00 179.00
213.00 223.00
169.00 179.00
213.00 223.00
169.00 179.00
213.00 223.00
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
36
QCL200 Series | Grade 2 | Standard Duty Cylindrical Locks
Order # With Lock Description Service Part #
1 1⁄8” X 2 1⁄4” FACE PLATE, 7⁄8” HOUSING DIAMETER, GRADE 2, UL (WIDE FACE)
S4 2 3/4” dead latch - square corner 8Q00187
2 3/4” dead latch - square corner - corridor function 8Q00578
R4 2 3/4” dead latch - radius corner 8Q00186
2 3/4” dead latch - radius corner- corridor function 8Q00577
S8 2 3/8” dead latch - square corner 8Q00189
2 3/8” dead latch - square corner - corridor function 8Q00580
R8 2 3/8” dead latch - radius corner 8Q00188
2 3/8” dead latch - radius corner - corridor function 8Q00579
S3 3 3/4” dead latch - square corner 8Q00190
S5 5” dead latch - square corner 8Q00191
S4 2 3/4” spring latch privacy - square corner 8Q00193
2 3/4” spring latch passage - square corner 8Q00199
R4 2 3/4” spring latch privacy - radius corner 8Q00192
2 3/4” spring latch passage - radius corner 8Q00198
S8 2 3/8” spring latch privacy - square corner 8Q00195
2 3/8” spring latch passage - square corner 8Q00201
R8 2 3/8” spring latch privacy - radius corner 8Q00194
2 3/8” spring latch passage - radius corner 8Q00200
S3 3 3/4” spring latch privacy - square corner 8Q00196
3 3/4” spring latch passage - square corner 8Q00202
S5 5” spring latch privacy - square corner 8Q00197
5” spring latch passage - square corner 8Q00203
1” X 2 1⁄4” FACE PLATE, 7⁄8” HOUSING DIAMETER, GRADE 2, UL (NARROW FACE)
NS4 2 3/4” dead latch - square corner 8Q00231
NR4 2 3/4” dead latch - radius corner 8Q00230
NS8 2 3/8” dead latch - square corner 8Q00233
NR8 2 3/8” dead latch - radius corner 8Q00232
NS4 2 3/4” spring latch privacy - square corner 8Q00227
2 3/4” spring latch passage - square corner 8Q00223
NR4 2 3/4” spring latch privacy - radius corner 8Q00226
2 3/4” spring latch passage - radius corner 8Q00222
NS8 2 3/8” spring latch privacy - square corner 8Q00229
2 3/8” spring latch passage - square corner 8Q00225
NR8 2 3/8” spring latch privacy - radius corner 8Q00228
2 3/8” spring latch passage - radius corner 8Q00224
1 1⁄8” X 2 1⁄4” FACE PLATE, 1” HOUSING DIAMETER, GRADE 1,3⁄4” THROW, 3 HR UL
FS4 2 3/4” dead latch, square corner, 3/4” throw 8Q00438
FR4 2 3/4” dead latch, radius corner, 3/4” throw 8Q00437
WIDE FACE LATCH FILLER
Wide face latch adaptor plate (converts 1” latch face
plate to 1 1/8”) 8Q00217
NO LATCH
NOL No Latch
LATCH OPTIONS (SPECIFY FINISH)
Grade 2 - Deadlatch
Grade 2 - Deadlatch
Grade 2 - Springlatch
Grade 2 - Springlatch
Cylindrical Locks Price List 67CH
Price With
Lock
Service Part
List Price
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
Add 16.00 24.00
Add 18.00 30.00
NC 9.50
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
Add 16.00 24.00
Add 16.00 24.00
Add 18.00 30.00
Add 18.00 30.00
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
NC 8.60
Add 99.00 111.00
Add 99.00 111.00
1.40
Deduct 7.80
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
37
QCL200 Series | Grade 2 | Standard Duty Cylindrical Locks
Order #
With Lock Description Service
Part #
118 F
2 3/4” x 11/8” T-Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00165
478S
4 7/8” x 1 1/4” ANSI Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00166
FLR 2 1/4” Full Lip Round Corner Strike UL 8Q00241
FLS 2 1/4” Full Lip Square Corner Strike UL 8Q00240
NO STRIKE
NOS No Strike
STRIKE OPTIONS (SPECIFY FINISH)
Key Blanks & CoresCylindrical Locks
Price List 67CH
Price
With Lock
Service Part
List Price
NC 4.80
NC 7.60
NC 4.50
NC 4.50
Deduct 4.10
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
38
QCL200 Series | Grade 2 | Standard Duty Cylindrical Locks
OTHER PARTS & SCREW PACKS
Description Service Part #
Installation Jig for Cylindrical Levers 8Q00075
Tailpiece QCL250/QCL270 - Entry/Storeroom 8Q00072
Tailpiece QCL260 - Classroom 8Q00074
SFIC Tailpiece for QCL200 Series 8Q00302
Cylinder Plug Holder QCL200 Series 8Q00066
Screw Pack & Tailpiece SFIC for QCL200 Series
(Specify nish) 8Q00064
Screw Pack for QCL200 Series Dummy
(Specify nish) 8Q00059
Screw Pack for QCL200 Series
(Specify nish) 8Q00061
Screw Pack for T-Strike
(Specify nish) 8Q00058
Trim Ring for Cylindrical Locks
(Shims Lock o door approximately 1/8”) (Available in 605, 613, 619, 626) 8Q00221
Cylindrical LocksCylindrical Locks Price List 67CH
Service Part
List Price
12.00
2.50
2.50
2.40
1.80
3.70
1.90
2.50
1.90
23.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
39
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
30 Single-Locking (Passage Lever)
31 Single-Locking SFIC (Passage Lever)
50 Double-Locking (Entry Lever)
51 Double-Locking SFIC (Entry Lever)
85 Indicator (Passage Lever)
ESierra
MSummit
ASlate
Order w/Lock Lever Strike Deadbolt Strike
118F 118F DBS
478S 478S DBS
FLS FLS DBS
FLR FLR DBS
FLS2 FLS FLS
FLR2 FLR FLR
NOS No Strikes
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
626 Satin Chrome
BF BEST “F” SFIC
SMT Re-Key*
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QCI231 E626 NR4 118F BF6 KD
You would get: Grade 2 Interconnect Single SFIC Lock, Sierra Lever, Satin Chrome, 23
⁄4" Narrow Radius Latches,
“T” Strike with Standard Deadbolt Strike, BEST “F” SFIC Keyway, Keyed Dierent.
Base Part Number
Series Function Design Finish Latch Strike Keyway # Of Pins Keying
QCI2 31 E 626 NR4 118F BF 6 KD
Order w/Lock Lever & Deadbolt Latch
NR4 Narrow Radius 2-3/4
NS4 Narrow Square 2-3/4
NS8 Narrow Square 2-3/8
R4 Radius 2-3/4
S4 Square 2-3/4
S8 Square 2-3/8
Order w/Lock Lever Latch Deadbolt Latch
NR8 Narrow Radius 2-3/8 Narrow Radius 2-3/4
R8 Radius 2-3/8 Radius 2-3/4
NOTES:
* Re-key available on QCI230 function only
Interconnected LocksKey Blanks & Cores
Interconnected Locks
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
40
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
NOTES:
Re-Key Available on QCI230 Functions only.
Consult factory for lead times on 605 nish.
Available in: 605, 613, 619, 626
Sierra (E)
Available in: 605, 613, 619, 626
Summit (M)
Available in: 605, 613, 619, 626
Slate (A)
Model/Series Functions Style Case
Qty
QCI230 Single Locking (Passage Lever) E / M / A 6
QCI231 Single Locking SFIC (Passage Lever) E / M / A 6
QCI250 Double Locking (Entry Lever) E / M / A 6
QCI251 Double Locking SFIC E / M / A 6
QCI285 Indicator E / M / A 6
Order w/ Lock Description
FT QCI200 Exterior Escutcheon Trim
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Interconnected Locks Price List 67CH
List Price
626 605, 613, 619
308.00 320.00
334.00 347.00
342.00 354.00
436.00 450.00
345.00 360.00
w/ Lock
Add 24.00
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
41
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
Order as parts only Description Service Part #
1 -1⁄8” X 2 -1⁄4” FACE PLATE, 7⁄8” HOUSING DIAMETER, GRADE 2, UL (WIDE FACE)
S4 2 3/4” spring latch passage - square corner 8Q00199
R4 2 3/4” spring latch passage - radius corner 8Q00198
S8 2 3/8” spring latch passage - square corner 8Q00201
R8 2 3/8” spring latch passage - radius corner 8Q00200
S4 2 3/4” dead latch - square corner 8Q00187
R4 2 3/4” dead latch - radius corner 8Q00186
S8 2 3/8” dead latch - square corner 8Q00189
R8 2 3/8” dead latch - radius corner 8Q00188
1”X 2-1⁄4” NARROW FACE PLATE,7⁄8” HOUSING DIAMETER, GRADE 2, UL (NARROW
FACE)
NS4 2 3/4” spring latch passage - square corner 8Q00223
NR4 2 3/4” spring latch passage - radius corner 8Q00222
NS8 2 3/8” spring latch passage - square corner 8Q00225
NR8 2 3/8” spring latch passage - radius corner 8Q00224
NS4 2 3/4” dead latch - square corner 8Q00231
NR4 2 3/4” dead latch - radius corner 8Q00230
NS8 2 3/8” dead latch - square corner 8Q00233
NR8 2 3/8” dead latch - radius corner 8Q00232
LATCH OPTIONS (SPECIFY FINISH)
Grade 2 -
Deadlatch
Grade 2 -
Springlatch
Grade 2 -
Deadlatch
Grade 2 -
Springlatch
LATCH COMBINATIONS (SPECIFY FINISH)
Order # With Lock Lever Latch Deadbolt Latch
QCI230/231
S4 2 3/4” spring latch, square corner, 1 1/8” Face 2 3/4” bolt latch, square corner, 1 1/8” Face
R4 2 3/4” spring latch, radius corner, 1 1/8” Face 2 3/4” bolt latch, radius corner, 1 1/8” Face
S8 2 3/8” spring latch, square corner, 1 1/8” Face 2 3/8” bolt latch, square corner, 1 1/8” Face
R8 2 3/8” spring latch, radius corner, 1 1/8” Face 2 3/8” bolt latch, radius corner, 1 1/8” Face
NS4 2 3/4” spring latch, square corner, 1” Face 2 3/4” bolt latch, square corner, 1” Face
NR4 2 3/4” spring latch, radius corner, 1” Face 2 3/4” bolt latch, radius corner, 1” Face
NS8 2 3/8” spring latch, square corner, 1 “ Face 2 3/8” bolt latch, square corner, 1” Face
NR8 2 3/8” spring latch, radius corner, 1” Face 2 3/8” bolt latch, radius corner, 1” Face
QCI250/251
S4 2 3/4” dead latch, square corner, 1 1/8” Face 2 3/4” bolt latch, square corner, 1 1/8” Face
R4 2 3/4” dead latch, radius corner, 1 1/8” Face 2 3/4” bolt latch, radius corner, 1 1/8” Face
S8 2 3/8” dead latch, square corner, 1 1/8” Face 2 3/8” bolt latch, square corner, 11/8” Face
R8 2 3/8” dead latch, radius corner, 1 1/8” Face 2 3/8” bolt latch, radius corner, 1 1/8” Face
NS4 2 3/4” dead latch, square corner, 1” Face 2 3/4” bolt latch, square corner, 1” Face
NR4 2 3/4” dead latch, radius corner, 1 “ Face 2 3/4” bolt latch, radius corner, 1” Face
NS8 2 3/8” dead latch, square corner, 1” Face 2 3/8” bolt latch, square corner, 1” Face
NR8 2 3/8” dead latch, radius corner, 1” Face 2 3/8” bolt latch, radius corner, 1” Face
NO LATCH
NOL No Latch (Lever & Deadbolt)
Key Blanks & CoresInterconnected Locks
Price List 67CH
Price With Lock
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
Deduct 23.00
Service Part
List Price
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
8.60
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
42
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
Order as
parts only Description Service
Part #
Grade 2-
Deadbolt
DEADBOLT: 1 -1/8” X 2 -1/4” FACE PLATE, DEADBOLT, UL (WIDE FACE)
S4 2 3/4” deadbolt - square corner 8Q00321
R4 2 3/4” deadbolt - radius corner 8Q00320
S8 2 3/8” deadbolt - square corner 8Q00319
R8 2 3/8” deadbolt - radius corner 8Q00318
Grade 2-
Deadbolt
DEADBOLT: 1” X 2 -1⁄4” FACE PLATE, DEADBOLT, UL (NARROW FACE)
NS4 2 3/4” deadbolt - square corner 8Q00442
NR4 2 3/4” deadbolt - radius corner 8Q00441
NS8 2 3/8” deadbolt - square corner 8Q00440
NR8 2 3/8” deadbolt - radius corner 8Q00439
WIDE FACE LATCH FILLER
Wide face latch adaptor plate
(converts 1” latch face plate to 11⁄8”) 8Q00217
Grade 2 -
Boltlatch
Grade 2 -
Boltlatch
DEADBOLT OPTIONS (SPECIFY FINISH)
Interconnected Locks Price List 67CH
Service Part
List Price
16.00
16.00
16.00
16.00
16.00
16.00
16.00
16.00
1.40
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
43
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
DEADBOLT OPTIONS (SPECIFY FINISH) STRIKE COMBINATIONS (SPECIFY FINISH)
Order #
With Lock Lever Latch Deadbolt Latch
118F 2 3/4” x 1 1/8” T-Strike Standard Deadbolt Strike
478S ANSI 4 7/8” x 1 1/4” Strike Standard Deadbolt Strike
FLS Full Lip Square Corner Strike Standard Deadbolt Strike
FLR Full Lip Radius Corner Strike Standard Deadbolt Strike
FLS2 Full Lip Square Corner Strike Full Lip Square Corner Strike
FLR2 Full Lip Radius Corner Strike Full Lip Radius Corner Strike
NO STRIKE
NOS No Strike
Order as
parts only Description Service
Part #
LEVER
118 F 2 3⁄4” x 11⁄8” T-Strike 8Q00165
478S ANSI 4 7⁄8” x 11⁄4” Strike 8Q00166
FLS Full Lip Square Corner Strike 8Q00240
FLR Full Lip Radius Corner Strike 8Q00241
DEADBOLT
DBS 2 3⁄4” x 11⁄8” Deadbolt Strike - Square 8Q00164
DBR 2 3⁄4” x 11⁄8” Deadbolt Strike - Radius 8Q00530
478DS ANSI 4 7⁄8” x 11⁄4” Deadbolt Strike 8Q00244
FLS 2 1⁄4” Full Lip Square Corner Deadbolt Strike 8Q00317
FLR 2 1⁄4” Full Lip Radius Corner Deadbolt Strike 8Q00316
Less Cylinder
LC Less Cylinder
Less SFIC Cylinder
Key Blanks & CoresInterconnected Locks
Price List 67CH
Service Part
List Price
NC
Add 2.80
NC
NC
NC
NC
Deduct 8.20
Service Part
List Price
4.80
7.60
4.50
4.50
4.60
4.60
7.60
4.60
4.60
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
44
QCI200 Series | Grade 2 | Standard Duty Interconnected Locks
Description Service Part #
QCI200 Series deadbolt tailpiece 8Q00083
Tailpiece QCI200 Series 8Q00072
QCI200 Series outside escutcheon trim - 4’ center to center (Specify nish) 8Q00303
QCI200 Series Screw Pack 8Q00304
QCI251 Screw Pack 8Q00305
QCI231 Screw Pack 8Q00306
QCI200 Series Door Thickness Adjustment Gauge 8Q00307
QCI200 Series IC Core Tailpiece 8Q00308
Indicator Emergency Key 8Q00531
Re-Key Learn Tool 8Q00555
OTHER PARTS & SCREW PACKS
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
Interconnected Locks Price List 67CH
Service Part
List Price
2.50
2.50
23.00
2.50
2.50
2.50
1.90
2.50
2.30
4.60
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
45
QTL200 Series | Grade 2 | Standard Duty Tubular Locks
20 Single Dummy
30 Passage
40 Privacy
50 Entry/Oce
51 Entry/Oce SFIC
60 Classroom
61 Classroom SFIC
70 Storeroom
71 Storeroom SFIC
ESierra
MSummit
ASlate
QTL2 LATCH TABLE (New)
RA Adjustable Radius
SA Adjustable Square
NOL No Latch
478S ANSI 47⁄8" x 11⁄4" Strike
118F ANSI 11⁄8" x 23⁄4" Strike
FLS Full Lip Square Corner Strike
FLR Full Lip 1⁄4" Radius Corner Strike
NOS No Strike
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QTL271 E 626 SA FLR BF 6 KA H 625
You would get: Grade 2 Hurricane Compliant Tubular Storeroom SFIC Lock, Sierra Lever, Satin Chrome x
Bright Chrome, Adjustable Square Latch, Full Lip 1
⁄4" Radius Corner Strike, Standard “F” Keyway, Keyed Alike.
Base Part Number
Series Function Design Finish Latch Strike Keyway # of Pins Keying
QTL2 71 E 626 SA FLR BF 6 KA
625 Bright Chrome
Additional Options
Hurricane
Compliant
2nd
Finish
H 625
Tubular LocksKey Blanks & CoresTubular Locks
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
46
QTL200 Series | Grade 2 | Standard Duty Tubular Locks
NOTES:
* Privacy split nishes are priced at the highest nish price.
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Sierra (E) Slate (A)
Available in: 605, 613, 619, 625, 626
Privacy Split Available in: 626x625*
Summit (M)
Model/Series Functions Style Case Qty
QTL220 Half Dummy E / M / A 12
QTL230 Passage E / M / A 10
QTL240* Privacy E / M / A 10
QTL250 Entry/Oce E / M / A 10
QTL251 Entry/Oce SFIC E / M / A 10
QTL260 Classroom E / M / A 10
QTL261 Classroom SFIC E / M / A 10
QTL270 Storeroom E / M / A 10
QTL271 Storeroom SFIC E / M / A 10
Options
H Hurricane Compliant
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Tubular Locks Price List 67CH
Add
5.00
List Price
626 605, 613, 619, 625
52.00 59.00
104.00 118.00
112.00 125.00
126.00 139.00
174.00 188.00
126.00 139.00
174.00 188.00
126.00 139.00
174.00 188.00
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
47
QTL200 Series | Grade 2 | Standard Duty Tubular Locks
Order #
With Lock Description Service Part #
1” X 2 -1⁄4” FACE PLATE, GRADE 2 TUBULAR, UL (NARROW FACE)
SA Adjustable tubular dead latch,
1” square corner face plate G2 UL 8Q00162
RA Adjustable tubular dead latch,
1” radius corner face plate G2 UL 8Q00204
SA Adjustable tubular spring latch,
1” square corner face plate G2 UL 8Q00163
RA Adjustable tubular spring latch,
1” radius corner face plate G2 UL 8Q00205
WIDE FACE LATCH FILLER
Wide face latch adaptor plate
(converts 1” latch face plate to 11⁄8”) 8Q00217
NO LATCH
NOL No Latch
LATCH OPTIONS (SPECIFY FINISH)
Key Blanks & CoresTubular Locks
Price List 67CH
Price
With Lock
Service Part
List Price
NC 9.90
NC 9.90
NC 9.90
NC 9.90
N/A 1.40
Deduct 9.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
48
QTL200 Series | Grade 2 | Standard Duty Tubular Locks
Order #
With Lock Description Service
Part #
118 F
2 3⁄4” x 11⁄8” T-Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00165
478S
4 7⁄8” x 11⁄4” ANSI Strike
(Does not include screws.
Screwpack 8Q00058)
8Q00166
FLR 2 1⁄4” Full Lip Round Corner Strike UL 8Q00241
FLS 2 1⁄4” Full Lip Square Corner Strike UL 8Q00240
NO STRIKE
NOS No Strike
STRIKE OPTIONS (SPECIFY FINISH)
Tubular Locks Price List 67CH
Price
With Lock
Service Part
List Price
NC 4.80
NC 7.60
NC 4.50
NC 4.50
Deduct 4.10
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
49
QTL200 Series | Grade 2 | Standard Duty Tubular Locks
Description Service Part #
Tailpiece QTL200 & QRT300 Series 8Q00073
Cylinder Plug Holder QTL200 Series - Summit Style 8Q00067
Cylinder Plug Holder QTL200 Series - Sierra Style 8Q00068
Screw Pack for QTL200 Series
(Specify Finish) 8Q00062
Screw Pack for T-Strike
(Specify Finish) 8Q00058
Thick Door Pack for QTL200 Series (1 3⁄4” - 2”)
(Specify Finish) 8Q00063
OTHER PARTS & SCREW PACKS
Key Blanks & CoresTubular Locks
Price List 67CH
Service Part
List Price
2.50
2.00
2.00
2.00
1.90
2.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
50
QDB100 Series | Grade 1 | Heavy Duty Auxiliary Deadbolts
Example
If you ordered: QDB281 626 S8 DBS BF 6 KD H
You would get: Grade 1 Single Cylinder SFIC Auxiliary Deadbolt, Satin Chrome, 2 3⁄8" Deadbolt
Latch Square, Standard Deadbolt Strike, BEST “F” SFIC Keyway, Keyed Dierent, Hurricane Compliant.
80 Single Cylinder
81 Single Cylinder SFIC
82 Double Cylinder
83 Double Cylinder SFIC
86 Classroom
87 Classroom SFIC
QDB1 DEADBOLT TABLE (New)
NOL No Latch
NR4 Narrow Radius 2-3/4
NR8 Narrow Radius 2-3/8
NS4 Narrow Square 2-3/4
NS8 Narrow Square 2-3/8
R4 Radius 2-3/4
R8 Radius 2-3/8
S4 Square 2-3/4
S8 Square 2-3/8
478S ANSI 4 7⁄8" x 11⁄4" Strike
DBS Deadbolt Strike 11⁄8" x 2
3⁄4" Square
FLS Full Lip Square Corner Strike
FLR Full Lip 1⁄4" Radius Corner Strike
NOS No Strike
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Base Part Number
Series Function Finish Deadbolt Strike Keyway # of Pins Keying
QDB1 81 626 S8 DBS BF 6 KD
Additional
Options
Hurricane
compliant
H
Deadbolts Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
51
QDB100 Series | Grade 1 | Heavy Duty Auxiliary Deadbolts
NOTES:
Consult factory for lead times on 605, 625 nishes.
Available in: 605, 613, 619, 625, 626 Available in: 605, 613, 619, 625, 626
Single Cylinder Double Cylinder
Model/Series Functions Case Qty
QDB180 Single Cylinder 12
QDB181 Single Cylinder SFIC 12
QDB182 Double Cylinder 12
QDB183 Double Cylinder SFIC 12
QDB186 Classroom 12
QDB187 Classroom SFIC 12
Options
H Hurricane Compliant
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Key Blanks & CoresDeadbolts
Price List 67CH
Add
5.00
List Price
626 605, 613, 619, 625
123.00 128.00
167.00 172.00
158.00 163.00
246.00 251.00
129.00 134.00
173.00 178.00
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
52
QDB100 Series | Grade 1 | Heavy Duty Auxiliary Deadbolts
DEADBOLT OPTIONS (SPECIFY FINISH)
Order #
With Lock Description Service
Part #
1 -1⁄8” X 2 -1⁄4” FACE PLATE, DEADBOLT, UL (WIDE FACE)
S4 2 3⁄4” deadbolt - square corner 8Q00170
R4 2 3⁄4” deadbolt - radius corner 8Q00169
S8 2 3⁄8” deadbolt - square corner 8Q00168
R8 2 3⁄8” deadbolt - radius corner 8Q00167
1” X 2 -1⁄4” FACE PLATE, DEADBOLT, UL (NARROW FACE)
NS4 2 3⁄4” deadbolt - square corner 8Q00237
NR4 2 3⁄4” deadbolt - radius corner 8Q00236
NS8 2 3⁄8” deadbolt - square corner 8Q00235
NR8 2 3⁄8” deadbolt - radius corner 8Q00234
WIDE FACE LATCH FILLER
Wide face latch adaptor plate
(converts 1” latch face plate to 1-1⁄8”) 8Q00217
NO LATCH
NOL No Latch
Deadbolts Price List 67CH
Price
With Lock
Service Part
List Price
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
1.40
Deduct 14.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
53
QDB100 Series | Grade 1 | Heavy Duty Auxiliary Deadbolts
Order #
With Lock Description Service
Part #
DBS 23⁄4” x 11⁄8” Standard Deadbolt
Strike and Reinforcer 8Q00164
DBR 23⁄4” x 11⁄8” Standard Radius Deadbolt
Strike and Reinforcer 8Q00530
478S 4 7⁄8” x 11⁄4” ANSI Strike 8Q00244
FLR 21⁄4” Full Lip Round Corner Strike UL 8Q00316
FLS 2 1⁄4” Full Lip Square Corner Strike UL 8Q00317
Plastic Strike Box for QDB100 &
QDB200 Series (DBS Strike only) 8Q00161
NO STRIKE
NOS No Strike
STRIKE OPTIONS (SPECIFY FINISH)
Key Blanks & CoresDeadbolts
Price List 67CH
Price
With Lock
Service Part
List Price
NC 4.60
NC 4.60
Add 3.20 7.60
NC 4.60
NC 4.60
N/A 2.50
Deduct 4.20
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
54
QDB100 Series | Grade 1 | Heavy Duty Auxiliary Deadbolts
Description Service Part #
Tailpiece for QDB100 & QDB200 Series Double Cylinder (Qty 2) 8Q00085
Tailpiece and washer for Single Cylinder QDB100 & QDB200 Series 8Q00083
Spacer for Double Cylinder Deadbolt SFIC QDB100 &
QDB200 Series (Specify nish) 8Q00082
Thick Door Pack for QDB100 Series Single Cylinder (1 3⁄4”- 2 1⁄4”)
(Specify nish) 8Q00077
Thick Door Pack for QDB100 & QDB200 Series Double Cylinder
(1 3⁄4”- 2 1⁄4”) (Specify nish) 8Q00079
Thick Door Kit - Tailpiece and washer for Single Cylinder QDB100
& QDB200 Series (1 3⁄4”- 2 1⁄4”) 8Q00084
Cylinder Screw QDB100 & QDB200 Series 8Q00086
Screw Pack for T-Strike
(Specify nish) 8Q00058
Screw Pack for QDB100 Series Single Cylinder
(Specify nish) 8Q00076
Screw Pack for QDB100 & QDB200 Series Double Cylinder
(Specify nish) 8Q00078
OTHER PARTS & SCREW PACKS
Deadbolts Price List 67CH
Service Part
List Price
2.50
2.50
2.50
2.50
2.50
2.50
2.50
1.90
2.50
2.50
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
55
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
80 Single Cylinder
81 Single Cylinder SFIC
82 Double Cylinder
83 Double Cylinder SFIC
84 Inside Turnbolt
85 Indicator
86 Classroom
87 Classroom SFIC
88 Key Control†
478S ANSI 47⁄8" x 11⁄4" Strike
DBS Deadbolt Strike 11⁄8" x 2
3⁄4" Square
DBR Deadbolt Strike 11⁄8" x 2
3⁄4" Radius
FLS Full Lip Square Corner Strike
FLR Full Lip 1⁄4" Radius Corner Strike
NOS No Strike
605 Bright Brass
613 Oil Rubbed Bronze
619 Satin Nickel
625 Bright Chrome
626 Satin Chrome
BF BEST “F” SFIC
SMT Re-Key*
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QDB281 626 S8 DBS BF6 KD H
You would get: Grade 2 Single Cylinder SFIC Auxiliary Deadbolt, Satin Chrome, 2 3
⁄8" Deadbolt
Latch Square, Standard Deadbolt Strike, BEST “F” SFIC Keyway, Keyed Dierent, Hurricane Compliant.
Base Part Number
Series Function Finish Deadbolt Strike Keyway # of Pins Keying
QDB2 81 626 S8 DBS BF 6 KD
NOTES:
† Key control deadbolt only available with Re-Key cylinders.
* Re-Key available on QDB280. QDB288 is only available to order with Re-Key and
either SA or RA latches. SA and RA latches are not available on other deadbolts.
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
QDB2 DEADBOLT TABLE (New)
6A 6-Way Adjustable
NOL No Latch
NR4 Narrow Radius 2-3/4
NR8 Narrow Radius 2-3/8
NS4 Narrow Square 2-3/4
NS8 Narrow Square 2-3/8
RA Adjustable Radius*
R4 Radius 2-3/4
R8 Radius 2-3/8
SA Adjustable Square*
S4 Square 2-3/4
S8 Square 2-3/8
Additional
Options
Hurricane
Compliant
H
Key Blanks & CoresDeadbolts
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
56
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
Available in: 605, 613,
619, 625, 626
NOTES:
† Key Control Deadbolt available with Re-key Cylinders only.
Consult factory for lead times on 605, 625 nishes.
Available in: 605, 613,
619, 625, 626
Available in: 605, 613,
619, 625, 626*
Available in: 605, 619, 626
Single Cylinder Double Cylinder QDB285 Indicator QDB288 Key Control
Model/Series Functions Case Qty
QDB280 Single Cylinder 12
QDB281 Single Cylinder SFIC 12
QDB282 Double Cylinder 12
QDB283 Double Cylinder SFIC 12
QDB284 Inside Turnbolt 20
QDB285 Indicator 12
QDB286 Classroom 12
QDB287 Classroom SFIC 12
QDB288† Key Control 12
Options
H Hurricane Compliant
Deadbolts Price List 67CH
List Price
626 605, 613, 619, 625
76.00 82.00
98.00 103.00
95.00 100.00
141.00 146.00
38.00 43.00
62.00 67.00
81.00 86.00
102.00 109.00
89.00 95.00
Add
5.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
57
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
Order #
With Lock Description Service
Part #
1 1⁄8” X 2 1⁄4” FACE PLATE, DEADBOLT, UL (WIDE FACE)
S4 2 3⁄4” deadbolt - square corner 8Q00170
R4 2 3⁄4” deadbolt - radius corner 8Q00169
S8 2 3⁄8” deadbolt - square corner 8Q00168
R8 2 3⁄8” deadbolt - radius corner 8Q00167
1” X 2 1⁄4” FACE PLATE, DEADBOLT, UL (NARROW FACE)
NS4 2 3⁄4” deadbolt - square corner 8Q00237
NR4 2 3⁄4” deadbolt - radius corner 8Q00236
NS8 2 3⁄8” deadbolt - square corner 8Q00235
NR8 2 3⁄8” deadbolt - radius corner 8Q00234
6 WAY ADJUSTABLE LATCHES, DEADBOLT, UL (NARROW)
6A 1” square corner, 1” round corner and drive-
in 8Q00482
QDB288 KEY CONTROL LATCHES, 1” X 21⁄4” FACE PLATE, ADJUSTABLE BACKSET, UL
SA Square corner adjustable deadbolt 8Q00451
RA Round corner adjustable deadbolt 8Q00450
WIDE FACE LATCH FILLER
Wide face latch adaptor plate
(converts 1” latch face plate to 11⁄8”) 8Q00217
NO LATCH
NOL No Latch
DEADBOLT OPTIONS (SPECIFY FINISH)
Key Blanks & CoresDeadbolts
Price List 67CH
Price
With Lock
Service Part
List Price
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
NC 15.00
Add 2.40 16.00
NC 15.00
NC 15.00
N/A 1.40
Deduct 14.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
58
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
Order #
With Lock Description Service
Part #
DBS 2 3⁄4” x 11⁄8” Standard Deadbolt
Strike and Reinforcer 8Q00164
DBR 2 3⁄4” x 11⁄8” Standard Radius Deadbolt
Strike and Reinforcer 8Q00530
478S 4 7⁄8” x 11⁄4” ANSI Strike 8Q00244
FLR 2 1⁄4” Full Lip Round Corner Strike UL 8Q00316
FLS 2 1⁄4” Full Lip Square Corner Strike UL 8Q00317
Plastic Strike Box for QDB100 & QDB200 Series
(DBS Strike only) 8Q00161
NO STRIKE
NOS No Strike
STRIKE OPTIONS (SPECIFY FINISH)
Deadbolts Price List 67CH
Price
With Lock
Service Part
List Price
NC 4.60
NC 4.60
Add 3.20 7.60
NC 4.60
NC 4.60
N/A 2.50
Deduct 4.20
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
59
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
CYLINDER OPTIONS (SPECIFY FINISH)
Order #
With Lock Description Service
Part #
RE-KEY CYLINDERS
SMT
Re-Key Cylinder - QDB280 9Q0009-096
Re-Key Cylinder - QDB288 Tenant Cylinder (Bottom) 9Q0009-117
Re-Key Cylinder - QDB288 Control Cylinder (Top) 9Q0009-098
LESS CYLINDER
LC
Less Cylinder
Less SFIC Cylinder
Key Blanks & CoresDeadbolts
Price List 67CH
Price
With Lock
Service Part
List Price
NC 20.00
NC 20.00
NC 20.00
Deduct 23.00
Deduct 45.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
60
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
OTHER PARTS & SCREW PACKS
Deadbolts Price List 67CH
Service Part
List Price
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
1.90
2.50
2.50
2.30
4.60
Description Service Part #
Tailpiece for QDB100 & QDB200 Series Double Cylinder (Qty 2) 8Q00085
Tailpiece and washer for Single Cylinder QDB100 & QDB200 Series 8Q00083
Spacer for Double Cylinder Deadbolt SFIC QDB100 & QDB200 Series
(Specify nish) 8Q00082
Thick Door Pack for QDB200 Series Single Cylinder (1 3⁄4”- 2 1⁄4”) (Specify
nish) 8Q00081
Thick Door Pack for QDB100 & QDB200 Series Double Cylinder (1 3⁄4”- 2 1⁄4”)
(Specify nish) 8Q00079
Thick Door Kit - Tailpiece and washer for Single Cylinder (1 3⁄4”- 21⁄4”) 8Q00084
Thick Door Kit - Tailpiece and washer for Single SFIC Cylinder (1 3⁄4”- 21⁄4”) 8Q00588
Cylinder Screw QDB100 & QDB200 Series 8Q00086
Screw Pack for T-Strike (Specifynish) 8Q00058
Screw Pack for QDB200 Series Single Cylinder (Specifynish) 8Q00080
Screw Pack for QDB100 & QDB200 Series Double Cylinder (Specify nish) 8Q00078
Indicator Emergency Key 8Q00531
Re-Key Learn Tool 8Q00555
NO IMAGE
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
61
QDB200 Series | Grade 2 | Standard Duty Auxiliary Deadbolts
Description Service Part #
Cylinder Cover for QDB288 Key Control 8Q00453
Mounting screws for QDB288 Key Control 8Q00477
Torque blade for QDB288 Key Control 8Q00476
Gear assembly for QDB288 Key Control 8Q00474
Screws for gear assembly for QDB288 Key Control 8Q00475
Reset Cradle for Re-Key cylinders 8Q00484
OTHER PARTS & SCREW PACKS
Key Blanks & CoresDeadbolts
Price List 67CH
Service Part
List Price
2.80
1.80
1.80
6.60
1.60
43.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
62
QED100 Series | Grade 1 | Heavy Duty Exit Devices
11 Rim Hex Dog 24 CVR - Hex Dog
12 Rim Cylinder Dog 25 CVR - Cylinder Dog
13 Rim Fire Rated 26 CVR - Fire Rated
14 SVR - Hex Dog 27 CVR - LBR - Hex Dog
15 SVR - Cylinder Dog 28 CVR - LBR - Cylinder Dog
16 SVR - Fire Rated 29 CVR - LBR - Fire Rated
17 SVR - LBR - Hex Dog
18 SVR - LBR - Cylinder Dog
19 SVR - LBR - Fire Rated
QED1xx
Grade 1
Architectural
Exit Device
605 Bright Brass
313AN Anodized
Duranodic Bronze
626 Satin Chrome
LR Electried Latch Retraction
LRX Electried Latch Retraction
with Request to Exit
ED Electried Dogging
EDX Electried Dogging
with Request to Exit
XRequest to Exit
HC Hurricane Compliant†
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QED115 36" 7FT 313AN BF KD
You would get: Grade 1 Heavy Duty Architectural Surface Vertical Rod Exit Device with Cylinder
Dogging for a 7 Foot Door, in Anodized Duronodic Bronze nish. SFIC "F" Keyway, Keyed Dierent.
Series Function Options Size Door
Height*
Finish Keyway** Keying** Notes
QED1 15 LR 36" 7FT 313AN BF KD XXXX
7FT 7 ft Rod
8FT 8 ft Rod
* Applies to Vertical Rods only.
** Applies to Cylinder Dogged only.
† HC is only available for QED111-QED116.
36" Device 36
48" Device 48
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master
Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Exit Devices & Trims Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
63
QED100 Series | Grade 1 | Heavy Duty Exit Devices
NOTES:
All LBR re rated devices include a bottom re bolt.
Consult factory for lead times on 605 nish.
Available in: 605, 313AN, 626
Architectural Exit Device
Model/Series Functions Style Case Qty
QED111 Rim - Hex Dog 1
QED112 Rim - Cylinder Dog 1
QED113 Rim - Fire Rated 1
QED114 SVR - Hex Dog 7FT 1
QED115 SVR - Cylinder Dog 7FT 1
QED116 SVR - Fire Rated 7FT 1
QED117 SVR Less Bottom Rod - Hex Dog 7FT 1
QED118 SVR Less Bottom Rod - Cylinder Dog 7FT 1
QED119 SVR Less Bottom Rod - Fire Rated 7FT 1
QED124 CVR - Hex Dog 7FT 1
QED125 CVR - Cylinder Dog 7FT 1
QED126 CVR - Fire Rated 7FT 1
QED127 CVR - LBR - Hex Dog 7FT 1
QED128 CVR - LBR - Cylinder Dog 7FT 1
QED129 CVR - LBR - Fire Rated 7FT 1
Options
8FT Vertical rod kit for 8FT door application
48” 48” Device (Consult factory for lead-time)
HC
Hurricane Compliant Rim
Hurricane Compliant SVR
Less Cylinder
LC Less Cylinder
Key Blanks & CoresExit Devices & Trims
Price List 67CH
Add
41.00
47.00
97.00
21.00
List Price
626 605, 313AN
914.00 948.00
970.00 1004.00
977.00 1011.00
1203.00 1237.00
1259.00 1293.00
1265.00 1299.00
1166.00 1200.00
1222.00 1256.00
1228.00 1262.00
1265.00 1299.00
1320.00 1354.00
1330.00 1364.00
1247.00 1281.00
1302.00 1336.00
1309.00 1343.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
64
QED100 Series | Grade 1 | Heavy Duty Exit Devices
ELECTRIFIED OPTIONS (CONSULT FACTORY FOR LEAD TIMES)
POWER SUPPLY OPTIONS (CONSULT FACTORY FOR LEAD TIMES)
Electried Product Specications
• Consult Factory for lead times
• Electrication prices should be added to price of device
• Continuous duty solenoids
• Lifetime warranty on exit device; 1 year warranty on electronic components
• LR or LRX requires power supply 8Q00312 or 8Q00313
• Minimum door width 36”
• LR and ED requires the removal of mechanical dogging mechanism
• Options can be used in any Hex Dog or Fire Rated QED 100 Series Device
(How to order example: QED111LR 36” 626)
Power Supply Specications (10” x 10” x 4.25”)
8Q00312
• Provides power for up to two LR or LRX devices
• Supplied with wiring diagram in detailed instructions
• Automatic door operator interface
• Independent control of single exit devices (one or two single doors)
or sequential operation of two devices (pair of doors) eld adjustable
latch retraction time delay
• 24VDC or 12 VDC auxiliary power, unltered & unregulated
8Q00313
• Same as 8Q00312 with the addition of a day/night mode
• Provides separate input for retracting one exit device or two exit
devices sequentially without activating the auto door operator.
While the latches are held retracted auto operator can be activated
independently from a dierent output.
QED 100 Series
Model # Description
QED___LR
Electried Latch Retraction (LR) allows for the remote unlatching of exit devices. Continuous
duty solenoids retract latches momentarily or for extended periods of time. Requires the use of
power supply 8Q00312 or 8Q00313.
QED___ED
Electried Dogging (ED) allows continuous latch retraction and dogging simultaneously. ED
requires rst time mechanical activation after which the push bar will continuously hold the
push bar and latch retracted. When power is removed or interrupted from the device, the latch
bolt will extend and push bar will release. Uses power supply 8Q00314 (on page 50)
QED ___X
Request to Exit (X) is an SPDT (Single Pole Double Throw) switch which monitors the push bar
of the exit device. The X switch can be used to activate a door alarm, control a magnetic locking
device, shunt a door alarm or signal a control console when the push bar is depressed.
QED___LRX Electried Latch Retraction (LR) device with a Request to Exit (X) switch. Requires the use of
power supply 8Q00312 or 8Q00313.
QED___EDX Electried Dogging (ED) device with a Request to Exit (X) switch. Uses power supply 8Q00314 (on
page 50)
Model # Description
8Q00312 Power supply for Electronic Latch Retraction Devices (LR/LRX)
8Q00313 Power supply with Day/Night mode for Electronic Latch Retraction Devices (LR/LRX)
Exit Devices & Trims Price List 67CH
List Price
Adder
910.00
785.00
292.00
1130.00
1006.00
List Price
Adder
930.00
1058.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
65
QED200 Series | Grade 1 | Heavy Duty Narrow Stile Exit Devices
11 Rim Hex Dog 24 CVR - Hex Dog
12 Rim Cylinder Dog 25 CVR - Cylinder Dog
13†Rim Fire Rated 26 CVR - Fire Rated
14 SVR - Hex Dog 27 CVR - LBR - Hex Dog
15 SVR - Cylinder Dog 28 CVR - LBR - Cylinder Dog
16 SVR - Fire Rated 29 CVR - LBR - Fire Rated
17 SVR - LBR - Hex Dog
18 SVR - LBR - Cylinder Dog
19 SVR - LBR - Fire Rated
QED2xx
Grade 1
Narrow Stile
Exit Device
605 Bright Brass
313AN Anodized
Duranodic Bronze
626 Satin Chrome
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QED215 36" 7FT 626 BF KD
You would get: Grade 1 Heavy Duty Narrow Stile Surface Vertical Rod Exit Device with Cylinder
Dogging for a 7 Foot Door, in Brushed Chrome nish, SFIC "F" Keyway, Keyed Dierent.
Series Function Size Door
Height*
Finish Keyway** Keying** Strike
QED2 15 36" 7FT 313AN BF KD ALS
7FT 7 ft Rod
8FT 8 ft Rod
* Applies to Vertical Rods only.
** Applies to Cylinder Dogged only.
† QED213 available with HMS strike only.
36" Device 36
48" Device 48
ALS Aluminum Door
Strike
HMS Hollow Metal Door
Strike
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master
Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
NOTES:
Rim devices with ALS Strike and SVR devices require minimum stile width of 2".
Rim devices with HMS and CVR devices require minimum stile wide of 3.5".
Key Blanks & Cores
Exit Devices & Trims
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
66
QED200 Series | Grade 1 | Heavy Duty Narrow Stile Exit Devices
NOTES:
All LBR re rated devices include a bottom re bolt.
Consult factory for lead times on 605 nish.
Rim devices with ALS Strike and SVR devices require minimum stile width of 2".
Rim devices with HMS and CVR devices require minimum stile wide of 3.5".
Available in: 605, 313AN, 626
Narrow Stile Exit Device
Model/Series Functions Style Case Qty
QED211 Rim - Hex Dog 1
QED212 Rim - Cylinder Dog 1
QED213 Rim - Fire Rated 1
QED214 SVR - Hex Dog 7FT 1
QED215 SVR - Cylinder Dog 7FT 1
QED216 SVR - Fire Rated 7FT 1
QED217 SVR Less Bottom Rod - Hex Dog 7FT 1
QED218 SVR Less Bottom Rod - Cylinder Dog 7FT 1
QED219 SVR Less Bottom Rod - Fire Rated 7FT 1
QED224 CVR - Hex Dog 7FT 1
QED225 CVR - Cylinder Dog 7FT 1
QED226 CVR - Fire Rated 7FT 1
QED227 CVR - LBR - Hex Dog 7FT 1
QED228 CVR - LBR - Cylinder Dog 7FT 1
QED229 CVR - LBR - Fire Rated 7FT 1
Options
8FT Vertical rod kit for 8FT door application
48” 48” Device (Consult factory for lead-time)
Less Cylinder
LC Less Cylinder
* QED213 available with HMS strike only.
Exit Devices & Trims Price List 67CH
Add
38.00
45.00
List Price
626 605, 313AN
1076.00 1115.00
1129.00 1168.00
1138.00 1177.00
1453.00 1493.00
1505.00 1545.00
1514.00 1553.00
1415.00 1453.00
1467.00 1505.00
1475.00 1514.00
1506.00 1546.00
1558.00 1598.00
1568.00 1607.00
1473.00 1512.00
1526.00 1565.00
1534.00 1574.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
67
QED100/200 Series | Grade 1 | Heavy Duty Exit Devices
Description Service Part #
Top Rod Latch for SVR & LBR - QED100/200
(requires screw pack 8Q00268 - see QED100/200 Other Parts & Screw
Packs)
8Q00256
Top Rod Latch for CVR - QED100
(requires screw pack 8Q00278 - see QED100/200 Other Parts & Screw
Packs)
8Q00271
Use Same Image
as 8Q00271
Top Rod Latch for CVR - QED200
(requires screw pack 8Q00278 - see QED100/200 Other Parts & Screw
Packs)
8Q00584
Bottom Rod Latch for SVR - QED100/200
(requires screw pack 8Q00268 - see QED100/200 Other Parts & Screw
Packs)
8Q00257
Bottom Rod Latch for CVR - QED100
(requires screw pack 8Q00278 - see QED100/200 Other Parts & Screw
Packs)
8Q00272
Use Same Image
as 8Q00272
Bottom Rod Latch for CVR - QED200
(requires screw pack 8Q00278 - see QED100/200 Other Parts & Screw
Packs)
8Q00585
Fire Latch for QED100/200 LBR Fire Rated
* Can only be used with re rated LBR devices. 8Q00279
Bottom Rod for SVR - QED100/200
(requires screw pack 8Q00268 - see QED100/200 Other Parts & Screw
Packs)
8Q00258
Bottom Rod for CVR - QED100/200 8Q00280
7’ Top Rod for SVR & LBR - QED100/200 8Q00259
7’ Top Rod for CVR - QED100/200 8Q00281
8’ Top Rod for SVR & LBR - QED100/200 8Q00260
8’ Top Rod for CVR - QED100/200 8Q00282
QED100/200 Series SVR & LBR, 7’ Top Rod Cover Set (includes top rod
and base plate) (requires screw pack 8Q00261 - see QED100/200 Other
Parts & Screw Packs)
8Q00249
QED100/200 Series SVR & LBR, 8’ Top Rod Cover Set
(includes cover and base plate) (requires screw pack 8Q00261 - see
QED100/200 Other Parts & Screw Packs)
8Q00250
QED100/200 Series SVR, Bottom Rod Cover Set
(includes cover and base plate) (requires screw pack 8Q00261- see
QED100/200 Other Parts & Screw Packs)
8Q00251
LATCH & ROD PARTS (SPECIFY FINISH)
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
626 605, 313AN
1076.00 1115.00
1129.00 1168.00
1138.00 1177.00
1453.00 1493.00
1505.00 1545.00
1514.00 1553.00
1415.00 1453.00
1467.00 1505.00
1475.00 1514.00
1506.00 1546.00
1558.00 1598.00
1568.00 1607.00
1473.00 1512.00
1526.00 1565.00
1534.00 1574.00
List Price
Deduct 47.00
List Price
144.00
144.00
109.00
144.00
144.00
109.00
76.00
35.00
35.00
35.00
35.00
41.00
41.00
67.00
72.00
61.00
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
68
QED100/200 Series | Grade 1 | Heavy Duty Exit Devices
Description Service Part #
Strike Kit for Rim Panic - QED100/200
(includes mounting hardware) 8Q00254
Strike Kit for Rim Fire Rated - QED100/200
(includes mounting hardware) 8Q00255
Double Door Strike Kit for Rim - QED111 & QED112
(includes mounting hardware) 8Q00269
Strike Kit for Top Latch for SVR Panic - QED100/200
(includes mounting hardware) 8Q00247
Strike Kit for Top Latch for CVR Panic - QED100/200 8Q00273
Strike Kit for Top Latch for SVR Fire - QED100/200
(includes mounting hardware) 8Q00248
Strike Kit for Top Latch for CVR Fire - QED100/200 8Q00274
Strike Kit for Bottom Latch for SVR/CVR Panic - QED100/200
(includes mounting hardware) 8Q00265
Strike Kit for Bottom Latch for SVR/CVR Fire - QED100/200
(includes mounting hardware) 8Q00266
Strike Shim Kit for QED100/200 Series Rim Devices - 1 Piece 8Q00285
Blade Stop Strike For Aluminum Door Application - QED200 S988
STRIKE PARTS
Exit Devices & Trims Price List 67CH
List Price
35.00
41.00
61.00
47.00
47.00
55.00
55.00
47.00
47.00
6.90
88.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
69
QED100/200 Series | Grade 1 | Heavy Duty Exit Devices
OTHER PARTS & SCREW PACKS
Description Service Part # Qty
QED100/200 Series End Cap (Specify nish) 8Q00264 1
QED100/200 Series End Cap Bracket and Screw Pack 8Q00246 1
QED100/200 Series SVR & LBR, Top & Bottom Latch Screw Pack
(Specify nish) 8Q00268 1
QED100/200 Series SVR & LBR, Rod Cover Screw Pack 8Q00261 1
QED100/200 Series SVR & LBR, Latch Cover Screw Pack
(Specify nish) 8Q00262 1
QED100/200 Series SVR, Rod Connector Kit
(connects top & bottom rod to exit device)) 8Q00263 1
QED100/200 Series Sex Bolts (Qty 4)
(Specify nish) 8Q00267 1
QED100/200 Series LBR, Head Cap Plug (black) 8Q00270 1
QED100/200 Series Cylinder Mounting Kit for Cylinder Dog Devices
(Specify nish) 8Q00252 1
QED100/200 Series Hex Wrench for Hex Dog Devices 8Q00253 1
Standard Cam for Mortise Cylinder 8Q00119 1
Cam Mounting Screws for Mortise Cylinders (Qty 2) 8Q00118 1
QED100/200 Series CVR Rod Connector 8Q00275 1
QED100/200 Series CVR-LBR Rod Connector 8Q00276 1
QED100/200 Series CVR Installation Jig 8Q00277 1
QED100/200 Series CVR Latch Screw Pack 8Q00278 1
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
35.00
16.00
21.00
19.00
7.50
21.00
23.00
7.50
35.00
6.40
4.60
1.50
21.00
21.00
8.90
21.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
70
QED100/200 Series | Grade 1 | Heavy Duty Exit Devices
THICK DOOR KITS (TDK's)
GLASS BEAD KITS (GBK's) (SPECIFY FINISH)
Thick door kits (TDK’s) are used to extend the length of the exit trim
spindle for non-standard (13⁄4") thick doors. These kits include appropriate
length exit trim spindles and fasteners.
- Glass bead kits (GBK's) are used to shim exit devices o the
face of a door with raised glass beads. Each kit
contains (2) 1⁄8" shims
(total clearance of 1⁄4") and fasteners.
- Requires the use of a thick door kit (TDK) if using an exit
device trim.
- Available nishes: 605, 313, 626
Trim
Door Thickness
2” 2 1 ⁄4” 2 1 ⁄2” 2 3⁄4”
QET130
8Q00427 8Q00428 8Q00429 8Q00430QET160
QET180
QET165 8Q00431 8Q00432 8Q00433 8Q00434
Part # Model Finishes
8Q00414 QED100 Rim and CVR Devices 605, 313AN,
626
8Q00415 QED100 SVR 7FT Device 605, 313AN,
626
8Q00416 QED100 SVR 8FT Device 605, 313AN,
626
8Q00586 QED200 Rim and CVR Device 605
8Q00546 QED200 Rim and CVR Device 313AN
8Q00547 QED200 Rim and CVR Device 626
8Q00548 QED200 SVR 7FT Device 605
8Q00549 QED200 SVR 7FT Device 313AN
8Q00550 QED200 SVR 7FT Device 626
8Q00551 QED200 SVR 8FT Device 605
8Q00552 QED200 SVR 8FT Device 313AN
8Q00553 QED200 SVR 8FT Device 626
Exit Devices & Trims Price List 67CH
List Price
23.00
List Price
72.00
182.00
188.00
72.00
182.00
188.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
71
QRM100 Series | Grade 1 | Mullions
Mullion Prepped for
QED100 Series QRM1
Standard 11
Fire Rated 13
600 Primer
689 Aluminum
695 Dark Bronze
8' Standard Height
9'
Not Available in Fire
Rated or Hurricane
Compliant Options
10'
11'
12'
Example
If you ordered: QRM111 HC KR 8' 600
You would get: Keyed Removable, Hurricane Compliant mullion, 8' height, with Primer nish.
Prepped for QED100 Series strike.
Series Function Options Height Finish
QRM1 11 HC KR 8' 600
HC Hurricane Compliant
KR Keyed Removable
Key Blanks & CoresExit Devices & Trims
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
72
QRM100 Series | Grade 1 | Mullions
Applications
Use with Rim Exit Devices on pairs of doors.
Product Specications
• 2”x 3” (51 mm x 76 mm) steel mullion tube. 1⁄8" wall thickness.
• Hurricane: 2" x 3" steel mullion tube. 5/16" wall thickness.
• Size: Standard for openings 8’0” high, eld sizeable for openings less than 8’0”.
9’, 10’, 11’ & 12’ also available and are eld sizeable.
• Mullion is pre-prepped for QED100 Series Exit Devices
• Fire and Hurricane Rating 8' 0" high max.
• Available Finishes: Primer (600), Aluminum (689) and Dark Bronze (695)
KEYED REMOVEABLE MULLIONS (CONSULT FACTORY FOR LEAD TIMES)
REMOVEABLE MULLIONS (CONSULT FACTORY FOR LEAD TIMES)
QRM111 HC KR OR QRM113 HC KR
Locking KR Headcap
(Rim Cylinder not included)
Hurricane Compliant
Order # Description
Mullions include: Mullion Tube, Cap, Base, Fasteners
QRM111 * Removable Mullion
QRM111 HC Hurricane Compliant, Removable Mullion
QRM113 Fire Rated, Removable Mullion
QRM113 HC Fire Rated, Hurricane Compliant, Removable Mullion
Order # Description
Mullions include: Mullion Tube, Cap, Base, Fasteners. Cylinder not included. Keyed Removable
Mullions utilize Standard Rim Cylinders. Reference Cylinders, Keys & Keying section for more details.
QRM111 KR* Keyed Removable Mullion
QRM111 HC KR Hurricane Compliant, Keyed Removable Mullion
QRM113 KR Fire Rated, Keyed Removable Mullion
QRM113 HC KR Fire Rated, Hurricane Compliant, Keyed Removable Mullion
Exit Devices & Trims Price List 67CH
List Price
600 689, 695
1038.00 1166.00
1338.00 1425.00
1249.00 1338.00
1510.00 1458.00
List Price
600 689, 695
605.00 691.00
862.00 949.00
779.00 862.00
1038.00 1122.00
*NOTE: For heights greater than 8’, add $19 for each additional 12”.
*NOTE: For heights greater than 8’, add $19 for each additional 12”.
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
73
QET100 Series | Grade 1 | Heavy Duty Exit Trims
20 DL - Dummy Trim Lever (ANSI 02)
25 DP - Dummy Trim Pull (ANSI 02)
30 PL - Passage Lever (ANSI 14)
60 KL - Keyed Lever (ANSI 08)
65 TP - Thumbpiece (ANSI 05)
67 DT - Dummy Thumbpiece (ANSI 02)
70 NL - Night Latch Lever (ANSI 03)
75 NL - Pull (ANSI 03)
80 NL - Night Latch Lever (ANSI 09)
90 Flat Plate (ANSI 01)
QET1xx
Grade 1
Architectural
Exit Trim
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QET160 M 626 BF KD
You would get: Grade 1 Escutcheon Trim Lever, Summit design, Satin Chrome Finish SFIC "F"
Keyway, Keyed Dierent. This Trim Matches to the QED100 Series Exit Devices
Series Function Design Finish Keyway Keying Notes
QET1 60 M 626 BF KD XXXX
605 Bright Brass
613†Oil Rubbed Bronze
626 Satin Chrome
690†Painted Duranodic Bronze
LPull
ESierra
MSummit
ASlate
† 613 Finish available for lever escutcheon trims; 690 nish available for escutcheon pull trims
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Key Blanks & CoresExit Devices & Trims
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
74
QET100 Series | Grade 1 | Heavy Duty Exit Trims
Available in: 605, 613**, 626 Available in: 605, 613**, 626
Available in: 605, 626, 690
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
Dummy Pull
QET125
Thumb Piece
QET165
Night Latch Pull
QET175
Flat Plate
QET190
Dummy Thumb Piece
QET167
Escutcheon Trims Sierra (E) Escutcheon Trims Summit (M)
Escutcheon Trims Pull & Flat Plates
Model/Series Functions Style Cylinder Type Case Qty
QET120 Dummy Escutcheon Lever - ANSI 02 E/M/A - 6
QET130 Passage Escutcheon Lever - ANSI 14 E/M/A - 6
QET160 Keyed Escutcheon Lever (Classroom)
- ANSI 08 E/M/A Mortise 6
QET170* Night Escutcheon Latch (Storeroom)
- ANSI 03 E/M/A Rim 6
QET180 Night Latch Escutcheon Latch
(Storeroom) - ANSI 09 E/M/A Mortise 6
Model/Series Functions Style Cylinder Type Case Qty
QET125 Dummy Escutcheon Pull - ANSI 02 L - 6
QET165* Thumbpiece Escutcheon Pull - ANSI 05 L Mortise 6
QET167 Dummy Thumbpiece Escutcheon Pull - ANSI 02 L - 6
QET175* Night Latch Escutcheon Pull - ANSI 03 L Rim 6
QET190 Flat Escutcheon Plate - ANSI 01 L - 6
Less Cylinder
LC Less Cylinder
Exit Devices & Trims Price List 67CH
List Price
605, 613, 626
401.00
401.00
453.00
453.00
453.00
List Price
605, 626, 690
129.00
298.00
129.00
181.00
77.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
75
QET200 Series | Grade 1 | Heavy Duty Narrow Stile Exit Trims
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
20 DL - Dummy Trim Lever (ANSI 02)
25 DP - Dummy Trim Pull for Rim/SVR (ANSI 02)
26 DP - Dummy Trim Pull for CVR (ANSI 02)
30 PL - Passage Lever (ANSI 14)
60 KL - Keyed Lever (ANSI 08)
70 NL - Night Latch Lever (ANSI 03)
75 NL - Pull (ANSI 03)
80 NL - Night Latch Lever (ANSI 09)
90 Flat Plate for Rim/SVR (ANSI 01)
91 Flat Plate for CVR (ANSI 01)
QET2xx
Grade 1
Narrow Stile
Exit Trim
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QET260 M 626 BF KD
You would get: Grade 1 Escutcheon Trim Lever, Summit design, Satin Chrome Finish SFIC "F"
Keyway, Keyed Dierent. This Trim Matches to the QED200 Series Exit Devices
Series Function Design Finish Keyway Keying Notes
QET2 60 M 626 BF KD XXXX
605 Bright Brass
613†Oil Rubbed Bronze
626 Satin Chrome
690†Painted Duranodic Bronze
LPull
ESierra
MSummit
ASlate
† 613 Finish available for lever escutcheon trims; 690 nish available for escutcheon pull trims
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Key Blanks & CoresExit Devices & Trims
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
76
QET200 Series | Grade 1 | Heavy Duty Narrow Stile Exit Trims
Available in: 605, 613**, 626 Available in: 605, 613**, 626 Available in: 605, 613**, 626
Available in: 605, 626, 690
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
Dummy Pull
QET225
Night Latch Pull
QET275
Flat Plate
QET290
Escutcheon Trims
Sierra (E)
Escutcheon Trims
Summit (M)
Escutcheon Trims
Slate (A)
Escutcheon Trims Pull & Flat Plates
Model/Series Functions Style Cylinder Type Case Qty
QET220 Dummy Escutcheon Lever - ANSI 02 E/M/A - 6
QET230 Passage Escutcheon Lever - ANSI 14 E/M/A - 6
QET260 Keyed Escutcheon Lever (Classroom) - ANSI 08 E/M/A Mortise 6
QET270* Night Escutcheon Latch (Storeroom) - ANSI 03 E/M/A Rim 6
QET280 Night Latch Escutcheon Latch (Storeroom) - ANSI 09 E/M/A Mortise 6
Less Cylinder
LC Less Cylinder
Exit Devices & Trims Price List 67CH
List Price
605, 613, 626
404.00
404.00
457.00
457.00
457.00
List Price
Deduct 47.00
Model/Series Functions Style Cylinder Type Case Qty
QET225 Dummy Escutcheon Pull for Rim/SVR - ANSI 02 L - 6
QET226 Dummy Escutcheon Pull for CVR - ANSI 02 L - 6
QET275* Night Latch Escutcheon Pull - ANSI 03 L Rim 6
QET290 Flat Escutcheon Plate for Rim/SVR - ANSI 01 L - 6
QET291 Flat Escutcheon Plate for CVR - ANSI 01 L - 6
List Price
605, 626, 690
130.00
130.00
182.00
77.00
77.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
77
QET100/200 Series | Grade 1 | Heavy Duty Exit Trims
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
NOTES:
* Not recommended for use on exit devices with vertical rods. Consult factory for lead times on 605 nish.
** 613 Finish trims match 313 nish exit devices.
Description Service
Part # Qty
QET100/200 Series Screw Pack and Square Pin for Escutcheon Trims 8Q00132 1
QET100/200 Series Screw Pack for Pull Plates 8Q00134 1
QET100/200 Series Cylinder Mounting Kit (Specify nish) 8Q00135 1
QET100/200 Series Cylinder Lock and Screw Packfor Thumb Piece
Pulls - (Specify nish) 8Q00136 1
QET100/200 Series Sex Nuts for Flat Plate - (Qty 2)
(Specify nish) 8Q00139 1
Rim Cylinder Tailpiece 8Q00140 1
Rim Cylinder Tailpiece– Thick Door (Measures 2-3/8”) 8Q00480 1
Standard Cam for Mortise Cylinder 8Q00119 1
Cam Mounting Screws for Mortise Cylinders (Qty 2) 8Q00118 1
Rim Cylinder Retaining Cup 8Q00529 1
OTHER PARTS & SCREW PACKS
NO IMAGE
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
4.60
1.30
23.00
5.80
5.80
2.50
2.50
4.60
1.50
5.80
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
78
QED300 Series | Grade 1 | Standard Duty Exit Devices
11 Rim Hex Dog
12 Rim Cylinder Dog
13 Rim Fire Rated
14 SVR Hex Dog
15 SVR - Cylinder Dog
16 SVR - Fire Rated
17 SVR - LBR - Hex Dog
18 SVR - LBR - Cylinder Dog
19 SVR - LBR - Fire Rated
QED3xx Grade 1 Standard
Duty Exit Device
689 Painted Aluminum
690 Painted Duranodic Bronze
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QED315 36" 7FT 689 BF KD
You would get: Grade 1 Standard Duty Surface Vertical Rod Exit Device 36", with Cylinder Dogging
for a 7 Foot Door, in Painted Aluminum nish. SFIC "F" Keyway, Keyed Dierent.
Series Function Size Door
Height*
Finish Keyway** Keying** Notes
QED3 15 36" 7FT 689 BF KD XXXX
7FT 7 ft Rod
8FT 8 ft Rod
36" 36" Device
48" 48" Device
* Applies to Surface Vertical Rods only
** Applies to Cylinder Dogged only
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Exit Devices & Trims Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
79
QED300 Series | Grade 1 | Standard Duty Exit Devices
NOTES:
*QED319 Includes Bottom Fire Latch.
Available in: 689 & 690
Standard Duty Exit Device
Model/Series Functions Style Case Qty
QED311 Rim - Hex Dog 4
QED312 Rim - Cylinder Dog 4
QED313 Rim - Fire Rated 4
QED314 Surface Vertical Rod - Hex Dog 7FT 4
QED315 Surface Vertical Rod - Cylinder Dog 7FT 4
QED316 Surface Vertical Rod - Fire Rated 7FT 4
QED317 Surface Vertical Rod Less Bottom Rod - Hex Dog 7FT 4
QED318 Surface Vertical Rod Less Bottom Rod - Cylinder Dog 7FT 4
QED319* Surface Vertical Rod Less Bottom Rod - Fired Rated 7FT 4
Trim Options
8FT Vertical rod kit for 8FT door application
48” 48” Device
Less Cylinder
LC Less Cylinder
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
Add 15.00
Add 21.00
List Price
689, 690
275.00
328.00
372.00
452.00
506.00
575.00
438.00
492.00
575.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
80
QED300 Series | Grade 1 | Standard Duty Exit Devices
Description Service
Part #
Top Rod Latch for SVR & LBR - QED314-QED319
(requires screw pack 8Q00130 - see QED300 Other Parts & Screw Packs) 8Q00111
Bottom Rod Latch for SVR - QED314 & QED315
(requires screw pack 8Q00130 - see QED300 Other Parts & Screw Packs) 8Q00112
Bottom Rod Latch for SVR Fire Rated - QED316
(requires screw pack 8Q00130 - see QED300 Other Parts & Screw Packs) 8Q00113
Fire Latch for QED319 SVR-LBR-Fire Rated
*Can only be used with Fire Rated LBR devices. 8Q00279
Top Rod for SVR & LBR - QED314 - QED319 (7 Foot) 8Q00114
Top Rod for SVR & LBR - QED314 - QED319 (8 Foot) 8Q00115
Bottom Rod for SVR - QED314, QED315, QED316 8Q00116
LATCH & ROD PARTS (SPECIFY FINISH)
Exit Devices & Trims Price List 67CH
List Price
95.00
95.00
95.00
76.00
34.00
39.00
34.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
81
QED300 Series | Grade 1 | Standard Duty Exit Devices
Description Service Part #
Strike for Rim Panic - QED311 & QED312
(includes mounting hardware) 8Q00120
Strike for Rim Fire Rated - QED313
(includes mounting hardware) 8Q00121
Double Door Strike for Rim Panic - QED311 & QED312
(includes mounting hardware) 8Q00208
Strike for Top Latch for SVR & LBR - QED314 - QED319
(includes mounting hardware) 8Q00128
Strike for Bottom Latch for SVR - QED314, QED315 & QED316
(includes mounting hardware) 8Q00127
Strike Shim Kit for Rim Devices - 1 piece
(2 3⁄8 “ Backset for QED300 series) 8Q00285
Strike Shim Kit for Rim Devices - 4 piece
(2 3⁄4” Backset for QED300 series) 8Q00286
STRIKE PARTS
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
24.00
24.00
58.00
24.00
24.00
6.90
21.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
82
QED300 Series | Grade 1 | Standard Duty Exit Devices
OTHER PARTS & SCREW PACKS
Description Service Part # Qty
QED300 Series Rim, Head Cap
(Specify nish) 8Q00109 1
QED300 Series SVR, Head Cap
(Specify nish) 8Q00110 1
Standard Cam for Mortise Cylinder 8Q00119 1
Cam Mounting Screws for Mortise Cylinders (Qty 2) 8Q00118 1
QED300 Series Cylinder Mounting Kit for Cylinder Dog Device -
QED312, QED315 & QED318 (Specify nish) 8Q00122 1
QED300 Series LBR, Head Cap Plug (black) 8Q00117 1
QED300 Series Hex Wrench for Hex Dog Devices -
QED311, QED314 & QED317 8Q00124 1
QED300 Series Device Mounting Screw Pack 8Q00125 1
QED300 Series SVR & LBR, Rod Holder Brackets and Screw Pac-
QED314 - QED319 (Specify nish) 8Q00126 1
QED300 Series SVR & LBR, Top & Bottom Latch Screw Pac
(Specify nish) 8Q00130 1
QED300 Series Sex Bolts (Qty 4)
(Specify nish) 8Q00131 1
QED300 Series End Cap
(Specify nish) 8Q00123 1
Exit Devices & Trims Price List 67CH
List Price
46.00
46.00
4.60
1.50
23.00
1.50
1.50
5.00
5.00
5.00
6.30
23.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
83
QED300 Series | Grade 1 | Standard Duty Exit Devices
THICK DOOR KITS (TDK's)
GLASS BEAD KITS (GBK's) (SPECIFY FINISH)
Thick door kits (TDK's) are used to extend the length of the exit trim spindle for non-standard (13⁄4")
thick doors. These kits include appropriate length exit trim spindles and fasteners.
- Glass bead kits (GBK's) are used to shim exit devices o the face of a door with raised glass beads. Each kit
contains (2) 1⁄8" shims (total clearance of 1⁄4") and fasteners.
- Requires the use of a thick door kit (TDK) if using an exit device trim.
- Available nishes: 689, 690
Trim
Door Thickness
2” 2 1/4” 2 1/2” 2 3/4”
QET330
8Q00419 8Q00420 8Q00421 8Q00422QET360
QET370
QET365 8Q00423 8Q00424 8Q00425 8Q00426
Part # Device Type Model Finishes
8Q00411 RIM QED311, QED312, QED313
689 & 690
8Q00412 SVR QED314, QED315, QED316
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
20.00
List Price
44.00
58.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
84
QRM300 Series | Grade 1 | Mullions
QRM3 Mullion Prepped for
QED300 Series
11 Standard
13 Fire Rated
600 Primer
689 Aluminum
695 Dark Bronze
8' Standard Height
9'
Not Available in
Fire Rated Option
10'
11'
12'
Example
If you ordered: QRM313 KR 8' 689
You would get: Keyed Removable, Fire Rated mullion, 8' height, with Aluminum nish. Prepped for
QED300 Series strike.
Series Function Options Height Finish
QRM3 13 KR 8' 689
KR Keyed Removable
Price List 67CH
Exit Devices & Trims
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
85
QRM300 Series | Grade 1 | Mullions
Applications
Use with Rim Exit Devices on pairs of doors.
Product Specications
• 2”x 3” (51 mm x 76 mm) steel mullion tube. 1⁄8" wall thickness.
• Size: Standard for openings 8’0” high, eld sizeable for openings less than 8’0”.
9’, 10’, 11’ & 12’ also available and are eld sizeable.
• Mullion is pre-prepped for QED300 Series Exit Devices.
• Fire Rating 8' 0" high max.
• Available Finishes: Primer (600), Aluminum (689) and Dark Bronze (695)
KEYED REMOVABLE MULLIONS (CONSULT FACTORY FOR LEAD TIMES)
REMOVABLE MULLIONS (CONSULT FACTORY FOR LEAD TIMES)
Locking KR Headcap
(Rim Cylinder not included)
Removable Keyed Mullion
Order # Description
Mullions include: Mullion Tube, Cap, Base, Fasteners. Cylinder not included. Keyed Removable Mullions
utilize Standard Rim Cylinders. Reference Cylinders, Keys & Keying section for more details.
QRM311 KR* Keyed Removable Mullion
QRM313 KR Fire Rated, Keyed Removable Mullion
Order # Description
Mullions include: Mullion Tube, Cap, Base, Fasteners.
QRM311 * Removable Mullion
QRM313 Fire Rated, Removable Mullion
Price List 67CH
List Price
600 689,695
1029.00 1154.00
1237.00 1324.00
List Price
600 689,695
599.00 682.00
772.00 855.00
*NOTE: For heights greater than 8', add $19 for each additional 12".
*NOTE: For heights greater than 8', add $19 for each additional 12".
Key Blanks & CoresExit Devices & Trims
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
86
QET300 Series | Grade 1 | Standard Duty Exit Trims
20 DL - Dummy Trim Lever (ANSI 02)
25 DP - Dummy Trim Pull (ANSI 02)
30 PL - Passage Lever (ANSI 14)
60 KL - Keyed Lever (ANSI 08)
65 TP - Thumbpiece (ANSI 05)
67 DT - Dummy Thumbpiece (ANSI 02)
70 NL - Night Latch Lever (ANSI 03)
75 NL - Pull (ANSI 03)
77 GW - Gull Wing
80 Night Latch Lever (ANSI 09)
90 Flat Plate (ANSI 01)
QET3xx Grade 1 Standard
Duty Exit Trim
BF BEST “F” SFIC
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QET360 M 689 BF KD
You would get: Grade 1 Escutcheon Trim Lever, Summit design, Aluminum Finish SFIC "F"
Keyway, Keyed Dierent. This Trim Matches to the QED300 Series Exit Devices
Series Function Design Finish Keyway Keying Notes
QET3 60 M 689 BF KD XXXX
689 Painted
Aluminum
690
Painted
Duranodic
Bronze
LPull
ESierra
MSummit
ASlate
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Exit Devices & Trims Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
87
QET300 Series | Grade 1 | Standard Duty Exit Trims
NOTES:
* Not recommended for use on exit devices with vertical rods.
NOTES:
* Not recommended for use on exit devices with vertical rods.
NOTES:
CYLINDERS ORDERED SEPARATELY.
Dummy Pull
QET325
Thumb Piece
QET365
Night Latch Pull
QET375
Gull Wing Pull
QET377
Flat Plate
QET390
Dummy Thumb Piece
QET367
Available in: 689, 690 Available in: 689, 690
Available in: 689, 690
Escutcheon Trims Sierra (E) Escutcheon Trims Summit (M)
Escutcheon Trims Pull & Flat Plates
Model/Series Functions Style Cylinder Type Case Qty
QET320 Dummy Escutcheon Lever - ANSI 02 E/M/A - 12
QET330 Passage Escutcheon Lever - ANSI 14 E/M/A - 12
QET360 Keyed Escutcheon Lever (Classroom)
- ANSI 08 E/M/A Mortise 12
QET370* Night Latch Escutcheon Latch
(Storeroom) - ANSI 03 E/M/A Mortise 12
QET380 Night Latch Escutcheon Latch
(Storeroom) - ANSI 09 E/M/A Mortise 12
Model/Series Functions Style Cylinder Type Case Qty
QET325 Dummy Escutcheon Pull - ANSI 02 L --- 12
QET365* Thumb Piece Escutcheon Pull - ANSI
05 L Mortise 12
QET367 Dummy Thumb Piece Escutcheon
Pull - ANSI 02 L --- 12
QET375* Night Latch Escutcheon Pull - ANSI
03 L Rim 12
QET377 Gull Wing Escutcheon Pull L Rim 12
QET390 Flat Escutcheon Plate - ANSI 01 L --- 12
Less Cylinder
LC Less Cylinder
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
689, 690
179.00
179.00
232.00
232.00
232.00
List Price
689, 690
85.00
251.00
85.00
136.00
87.00
46.00
List Price
Deduct 47.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
88
QET300 Series | Grade 1 | Standard Duty Exit Trims
Description Service Part # Qty
QET300 Series Screw Pack for Pull Plates -
QET325 & QET375 8Q00134 1
QET300 Series Cylinder Lock and Screw Pack for Thumb Piece
Pulls - QET365 8Q00136 1
QET300 Series Screw Pack, Cylinder Mounting Hardware &
Square Pin for Escutcheon Trims - QET360, QET370, QET380 8Q00137 1
QET300 Series Screw Pack & Square Pin for Escutcheon Trims -
QET320 & QET330 8Q00206 1
QET300 Series Cylinder Collar
(Specify nish) 8Q00138 1
QET300 Series Sex Nuts for Flat Plate - QET390 (Qty 2)
(Specify nish) 8Q00139 1
Rim Cylinder Tailpiece 8Q00140 1
Rim Cylinder Tailpiece– Thick Door (Measures 2-3/8”) 8Q00480 1
Standard Cam for Mortise Cylinder 8Q00119 1
Cam Mounting Screws for Mortise Cylinders (Qty 2) 8Q00118 1
Rim Cylinder Retaining Cup 8Q00529 1
OTHER PARTS & SCREW PACKS
NO IMAGE
Exit Devices & Trims Price List 67CH
List Price
1.30
5.80
9.20
4.60
24.00
5.80
2.50
2.50
4.60
1.50
5.80
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
89
QRT300 Series | Grade 1 | Standard Duty Round Rose Exit Trims
20 DL - Dummy Trim Lever
30 PL - Passage Lever
60 KL - Keyed Lever
61 KL - Keyed Lever SFIC
70 NL - Night Latch Lever
71 NL - Night Latch Lever SFIC
QRT3xx Standard Duty Rose
Exit Trim
BF BEST “F” SFIC*
KW Kwikset “KW”
WE Weiser “E”
SC Schlage “C”
GA Yale “GA”
LA Sargent “LA”
LC Less Cylinder
Example
If you ordered: QRT361 E 689 BF KD
You would get: Standard Duty Keyed Lever Round Rose Trim, Sierra Lever, Painted Aluminum Finish,
SFIC "F" Keyway, Keyed Dierent. This Trim Matches to the QED300 Series Exit Devices
Series Function Design Finish Keyway Keying Notes
QRT3 61 E 689 BF KD XXXX
626 Satin Chrome
689 Painted Aluminum
690 Painted Duranodic Bronze
ESierra
MSummit
* BEST "F" SFIC only on QRT 361 and QRT 371.
KD Keyed Dierent
KA Keyed Alike
SK Special Keying
-Construction Keyed
-Construction Master Keyed
-Maison Keyed
-Master Keyed
-Grand Master Keyed
-Great Grand Master Keyed
ZB Zero Bitted
Key Blanks & CoresExit Devices & Trims
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
90
QRT300 Series | Grade 1 | Standard Duty Round Rose Exit Trims
Available in: 689, 690 Available in: 689, 690
Round Rose Trims Sierra (E) Round Rose Trims Summit (M)
Model / Series Functions Style Case Qty
QRT320 Dummy Lever E/M 12
QRT330 Passage Lever E/M 12
QRT360 Keyed Lever (Classroom) E/M 12
QRT361 Keyed Lever SFIC (Classroom) E/M 12
QRT370 Night Latch Lever (Storeroom) E/M 12
QRT371 Night Latch Lever SFIC (Storeroom) E/M 12
Exit Devices & Trims Price List 67CH
List Price
689, 690
117.00
117.00
156.00
179.00
156.00
179.00
List Price
626
148.00
148.00
187.00
210.00
187.00
210.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
91
QRT300 Series | Grade 1 | Standard Duty Round Rose Exit Trims
Description Service Part # Qty
Tailpiece QRT300 Series 8Q00073 1
Screw pack for QRT300 series trims
(Specify nish) 8Q00219 1
Strike shim kit for rim devices- 1 piece
(2 3⁄8” Backset for QED300 series) 8Q00285 1
Strike shim kit for rim devices - 4 piece
(2 3⁄4” Backset for QED300 series) 8Q00286 1
OTHER PARTS & SCREW PACKS
Less Cylinder
LC
Less Cylinder
Less SFIC Cylinder
Key Blanks & CoresExit Devices & Trims
Price List 67CH
List Price
2.50
2.30
6.90
21.00
List Price
Deduct 21.00
Deduct 44.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
92
QDC100 Series | Grade 1 | Extra Duty Door Closers
00 Closer Body (No Arms Included)
11 Tri-Pack Arm
12 Tri-Pack Arm with Hold-Open
13 Extra Duty Arm with Compression Stop
14 Extra Duty Arm with Hold-Open and Compression Stop
15 Extra Duty Arm
16 Extra Duty Arm with Hold-Open
17 Extra Duty Arm with Stop
18 Extra Duty Arm with Hold-Open and Stop
19 Extra Duty Arm with Spring Stop
20 Extra Duty Arm with Hold-Open and Spring Stop
Example
If you ordered: QDC111 R 689
You would get: Grade 1 Extra Duty Closer - Full Adjustable (Sized 1-6),
Tri-pack Arm with Both Delayed Action & Back Check
Standard, Round Plastic Cover, Sex Nuts, Self Tapping Screws, Painted Aluminum nish
Series Function Trim Finish Options Handing
QDC1 11 R 689 LH
689 Painted Aluminum
690 Painted Duranodic Bronze
696 Painted Satin Brass
QDC1xx Grade 1 Extra Duty
Architectural Handing QDC 116 HEDA Arm and
Metal Cover Only
LH Left Hand
RH Right Hand
RFull-Sized Rounded Plastic Cover*
MFull-Size Metal Cover
* R - Ships standard
NOTES:
Sex nuts and self tapping screws come standard with QDC100 series door closers.
BF Barrier Free
Door Closers Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
93
QDC100 Series | Grade 1 | Extra Duty Door Closers
Available in: 689, 690 & 696
Tri-Pack Arm
NOTES:
Consult factory for lead times on Barrier Free (BF) closers and on 696 nish.
Model/Series Functions Case Qty
QDC100 Closer Body (Includes Rounded Cover, Screws & Sex Bolt) 3
QDC100BF Closer Body w/Barrier Free Option (Includes Rounded Cover, Screws & Sex Bolts) 3
QDC111 Tri-Pack Arm 3
QDC112 Tri-Pack Arm with Hold-Open 1
QDC113 Extra Duty Arm with Compression Stop 1
QDC114 Extra Duty Arm with Hold-Open and Compression Stop 1
QDC115 Extra Duty Arm 1
QDC116 Extra Duty Arm with Hold-Open 1
QDC117 Extra Duty Arm with Stop 1
QDC118 Extra Duty Arm with Hold-Open and Stop 1
QDC119 Extra Duty Arm with Spring Stop 1
QDC120 Extra Duty Arm with Hold Open and Spring Stop 1
Order With
Closer Description Service Part #
SN Sex Nuts (Qty 4) (Specify nish) 8Q00097
S/TAP Self Tapping Screws (Specify Finish) 8Q00436
M QDC100 Series Metal Cover - RH 8Q01140
M QDC100 Series Metal Cover - LH 8Q01141
R
Rounded Plastic Cover 689 8Q00540
Rounded Plastic Cover 690 8Q00541
Rounded Plastic Cover 696 8Q00542
List Price
6.30
15.00
57.00
57.00
29.00
With Closer
NC
NC
Add 57.00
Add 57.00
NC
NO IMAGE
Key Blanks & CoresDoor Closers
Price List 67CH
List Price
689, 690 & 696
286.00
286.00
350.00
396.00
410.00
433.00
379.00
401.00
390.00
412.00
481.00
503.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
94
QDC100 Series | Grade 1 | Extra Duty Door Closers
Description Service
Part # Qty
Tri-Pack Arm
(requires screw pack 8Q00457) 8Q00462 1
Tri-Pack Arm with Hold-Open
(requires screw pack 8Q00458) 8Q00463 1
Extra Duty Arm with Compression Stop
(requires screw pack 8Q00459) 8Q00464 1
Extra Duty Arm with Hold-Open and Compression Stop
(requires screw pack 8Q00459) 8Q00465 1
Extra Duty Arm
(requires screw pack 8Q00460) 8Q00466 1
Extra Duty Arm with Hold-Open - Right Hand
(requires screw pack 8Q00460) 8Q00467 1
Extra Duty Arm with Hold-Open - Left Hand
(requires screw pack 8Q00460) 8Q00468 1
Extra Duty Arm with Stop
(requires screw pack 8Q00459) 8Q01142 1
Extra Duty Arm with Hold-Open and Stop
(requires screw pack 8Q00459) 8Q01143 1
QDC100 Series Plastic Cover 8Q00461 1
Mounting Screw Pack for QDC100 Series 8Q00456 1
Screw Pack for QDC111 Tri-Pack Arm 8Q00587 1
Screw Pack for QDC112 Tri-Pack Arm with Hold-Open 8Q00458 1
Screw Pack for QDC113 Extra Duty Arm with Hold-Open &
QDC114 Extra Duty Arm with Hold-Open and Compression Stop 8Q00459 1
Screw Pack for QDC115 Extra Duty Arm &
QDC116 Extra Duty Arm with Hold-Open 8Q00460 1
QDC100 Drop Plate Kit - Pull Side, Regular Arm
(requires screw pack 8Q00473) 8Q00469 1
QDC100 Drop Plate Kit - Push Side, Top Jamb
(requires screw pack 8Q00473) 8Q00470 1
QDC100 Drop Plate Kit - Push Side, Parallel Arm
(requires screw pack 8Q00473) 8Q00471 1
QDC100 Drop Plate Kit - Push Side, Top Jamb
(requires screw pack 8Q00473) 8Q00472 1
Screw Pack for QDC100 Drop Plates 8Q00473 1
OTHER PARTS & SCREW PACKS (SPECIFY FINISH)
Door Closers Price List 67CH
List
Price
64.00
122.00
137.00
151.00
126.00
140.00
140.00
130.00
144.00
32.00
25.00
15.00
14.00
14.00
14.00
47.00
47.00
47.00
47.00
2.90
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
95
QDC100 Series | Grade 1 | Extra Duty Door Closers
Description Service
Part # Qty
Spring Stop Only for Retrot on QDC113, 114, 117, 118 in Finish 689 8Q00584 1
Spring Stop Only for Retrot on QDC113, 114, 117, 118 in Finish 690 8Q00585 1
Spring Stop Only for Retrot on QDC113, 114, 117, 118 in Finish 696 8Q00586 1
Extra Duty Arm with Spring Stop in Finish 689 8Q00534 1
Extra Duty Arm with Spring Stop in Finish 690 8Q00535 1
Extra Duty Arm with Spring Stop in Finish 696 8Q00536 1
Extra Duty Arm with Hold-Open and Spring Stop in Finish 689 8Q00537 1
Extra Duty Arm with Hold-Open and Spring Stop in Finish 690 8Q00538 1
Extra Duty Arm with Hold-Open and Spring Stop in Finish 696 8Q00539 1
OTHER PARTS & SCREW PACKS (SPECIFY FINISH)
109.00
109.00
72.00
221.00
221.00
221.00
236.00
236.00
236.00
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
NO IMAGE
Key Blanks & CoresDoor Closers
Price List 67CH
List
Price
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
96
QDC200 Series | Grade 1 | Heavy Duty Door Closers
Example
If you ordered: QDC211 F 689
You would get: Grade 1 Heavy Duty Slim line Non-Hold Open Door Closer - Full Adjustable
(Sized 1-6), Tri-packed Arms with Both Delayed Action & Back Check Standard, Full Sized cover,
Painted Aluminum nish, Sex Nuts and Self Tapping Screws
Series Function Trim Finish
QDC2 11 F 689
689 Painted Aluminum
690 Painted Duranodic Bronze
696 Painted Brass
FFull Size Cover
SSlim Line Cover
QDC2xx Grade 1 Heavy
Duty Architectural
00 Closer Body (No Arms Included)
11 Tri-Pack Arm
12 Tri-Pack Arm with Hold-Open
13 Heavy Duty Arm with Compression Stop
14 Heavy Duty Arm with Hold-Open and Compression Stop
NOTES:
Sex nuts and self tapping screws come standard with QDC200 series door closers.
Door Closers Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
97
QDC200 Series | Grade 1 | Heavy Duty Door Closers
Order with
Closer Description Service Part #
FFull Size Cover
(Specify Finish) 8Q00094
SSlim Cover
(Specify Finish) 8Q00096
SN Sex Nuts (Qty 4)
(Specify Finish) 8Q00097
S/TAP Self Tapping Screws (Qty 8)
(Specify Finish) 8Q00436
Available in: 689, 690 & 696
Tri-Pack Arm
Available in: 689, 690 & 696
Heavy Duty Arm
with Compression Stop
Available in: 689, 690 & 696
Tri-Pack Arm
with Hold-Open
Available in: 689, 690 & 696
Heavy Duty Arm
with Hold-Open
and Compression Stop
Model / Series Functions Case Qty
QDC200 Closer Body (Includes Closer Body, Cover, Screws & Sex Bolts) 6
QDC211 Tri-Pack Arm 6
QDC212 Tri-Pack Arm with Hold-Open 6
QDC213 Heavy Duty Arm with Compression Stop 3
QDC214 Heavy Duty Arm with Hold-Open and Compression Stop 3
NOTES:
Consult factory for lead times on 696 nish.
Key Blanks & Cores
Door Closers
Price List 67CH
List Price
689, 690 & 696
197.00
241.00
280.00
349.00
369.00
With Closer
689, 690 & 696
NC
NC
NC
NC
List Price
689, 690 & 696
22.00
22.00
6.30
15.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
98
QDC200 Series | Grade 1 | Heavy Duty Door Closers
Description Service Part # Qty
QDC200 Series Plastic Installation Template 8Q00454 1
Tri-Pack Arm
(requires screw pack 8Q00100) 8Q00087 1
Tri-Pack Arm with Hold-Open
(requires screw pack 8Q00099) 8Q00088 1
Heavy Duty Arm with Compression Stop
(requires screw pack 8Q00098) 8Q00089 1
Heavy Duty Arm with Hold-Open and Compression
Stop
(requires screw pack 8Q00098)
8Q00090 1
Pinion Cap - QDC200 Series 8Q00092 1
Parallel Arm Bracket
(requires screw pack 8Q00102) 8Q00093 1
Screw Pack for QDC213 Heavy Duty Arm with
Compression Stop & QDC214 Heavy Duty Arm with
Hold-Open and Compression Stop
8Q00098 1
Screw Pack for QDC212 Tri-Pack Arm with Hold
Open 8Q00099 1
Mounting Screw Pack for QDC200 Series 8Q00100 1
Screw Pack for Parallel Arm Bracket 8Q00102 1
Self Tapping Screw Pack (Qty 8) 8Q00436 1
Small Drop Plate Kit for QDC200 Series, Pull & Push
(2.44” x 12.97”) Top Jamb & Regular Arm 8Q00105 1
Large Drop Plate Kit for QDC200 Series, Pull & Push
(3.47” x 12.97”) Top Jamb & Regular Arm 8Q00106 1
Small Drop Plate Kit for QDC200 Series, Push
(2.94” x 12.97”) Parallel Arm 8Q00107 1
Large Drop Plate Kit for QDC200 Series, Push
Parallel Arm 8Q00108 1
OTHER PARTS & SCREW PACKS (SPECIFY FINISH)
Door Closers Price List 67CH
List Price
41.00
44.00
85.00
98.00
109.00
6.30
8.90
2.80
2.80
2.80
2.80
15.00
41.00
41.00
41.00
41.00
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
99
QDC300 Series | Grade 1 | Standard Duty Door Closers
Example
If you ordered: QDC311 F 689
You would get: Grade 1 Standard Duty Non-Hold Open Door Closer - Full Adjustable
(Sized 1-6), Tri-packed Arms with Both Delayed Action & Back Check Standard, Full Sized cover,
Painted Aluminum nish, Sex Nuts and Self Tapping Screws
Series Function Trim Finish Options
QDC3 11 F 689
689 Painted Aluminum
690 Painted Duranodic Bronze
696 Painted Brass
FFull Size Cover
NC No Cover
QDC3xx Grade 1 Standard
Duty
BF Barrier Free
00 Closer Body (No Arms Included)
11 Tri-Pack Arm
12 Tri-Pack Arm with Hold-Open
13 Heavy Duty Arm with Compression Stop
14 Heavy Duty Arm with Hold-Open and Compression Stop
NOTES:
Sex nuts and self tapping screws come standard with QDC300 series door closers.
Key Blanks & Cores
Door Closers
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
100
QDC300 Series | Grade 1 | Standard Duty Door Closers
Order With Closer Description Service
Part #
FFull Size Cover
(Specify nish) 8Q00095
SN Sex Nuts (Qty 4)
(Specify nish) 8Q00097
S/TAP Self Tapping Screws (Qty 8) 8Q00436
Available in: 689, 690 & 696
Tri-Pack Arm
Available in: 689, 690 & 696
Heavy Duty Arm
with CompressionStop
Available in: 689, 690 & 696
Tri-Pack Arm
with Open Arm
Available in: 689, 690 & 696
Heavy Duty Arm
with Hold Open
and Compression Stop
Model / Series Functions Case Qty
QDC300 Closer Body (Includes Closer Body, Cover, Screws & Sex Bolts) 6
QDC311 Tri-Pack Arm 6
QDC312 Tri-Pack Arm with Hold-Open 6
QDC313 Heavy Duty Arm with Compression Stop 3
QDC314 Heavy Duty Arm with Hold-Open and Compression Stop 3
NOTES:
Consult factory for lead times on Barrier Free (BF) closers and on 696 nish.
Door Closers Price List 67CH
List Price
689, 690 & 696
128.00
194.00
230.00
298.00
316.00
List Price
22.00
6.30
15.00
With Closer
Add 22.00
NC
NC
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
101
QDC300 Series | Grade 1 | Standard Duty Door Closers
Description Service Part
#Qty
QDC300 Series Plastic Installation Template 8Q00455 1
Tri-Pack Arm
(requires screw pack 8Q00100) 8Q00087 1
Tri-Pack Arm with Hold-Open
(requires screw pack 8Q00099) 8Q00088 1
Heavy Duty Arm with Compression Stop
(requires screw pack 8Q00098) 8Q00089 1
Heavy Duty Arm with Hold-Open and Compression
Stop
(requires screw pack 8Q00098)
8Q00090 1
Pinion Cap - QDC300 Series 8Q00092 1
Parallel Arm Bracket (requires screw pack 8Q00102) 8Q00093 1
Screw Pack for QDC313 Dead Stop (Cush) Arm &
QDC314 Dead Stop (Cush) Arm Hold-Open 8Q00098 1
Screw Pack for QDC312 Hold-Open Arm 8Q00099 1
Mounting Screw Pack for QDC300 Series 8Q00100 1
Screw Pack for Parallel Arm Bracket 8Q00102 1
Self tapping screw pack (Qty 8) 8Q00436 1
Small Drop Plate Kit for QDC300 Series,
(2.38” x 9.76” ) 8Q00103 1
Large Drop Plate Kit for QDC300 Series,
(3.27” x 9.76” ) 8Q00104 1
OTHER PARTS & SCREW PACKS (SPECIFY FINISH)
Key Blanks & CoresDoor Closers
Price List 67CH
List
Price
39.00
44.00
85.00
98.00
109.00
6.30
8.90
2.80
2.80
2.80
2.80
15.00
39.00
39.00
Weights & Measurements
Product Function Unit Weight Case Qty Pallet Qty Length Width Height Length Width Height
QMS/QME/QML SERIES - GRADE 1 MORTISE LOCKS
Sectional Trims
QMS120 Single Dummy Sectional 1.23 496 17 14.25 10 13.38 8.63 4
QMS122 Full Dummy Sectional 1.8 496 17 14.25 10 13.38 8.63 4
QMS130 Passage Sectional 4.83 496 17 14.25 10 13.38 8.63 4
QMS140 Privacy Sectional 5.75 496 17 14.25 10 13.38 8.63 4
QMS145 Privacy w/ Deadbolt Sectional 6 4 96 17 14.25 10 13.38 8.63 4
QMS150 Entry Sectional 5.85 496 17 14.25 10 13.38 8.63 4
QMS152 Exit Sectional 6.50 496 17 14.25 10 13.38 8.63 4
QMS154 Corridor Sectional 6.56 496 17 14.25 10 13.38 8.63 4
QMS158 Dormitory Sectional 6.64 496 17 14.25 10 13.38 8.63 4
QMS160 Classroom Sectional 5.79 496 17 14.25 10 13.38 8.63 4
QMS162 Classroom Security Sectional 6.42 496 17 14.25 10 13.38 8.63 4
QMS164 Apartment Sectional 6.42 496 17 14.25 10 13.38 8.63 4
QMS170 Storeroom Sectional 5.61 496 17 14.25 10 13.38 8.63 4
QMS172 Institutional Sectional 6.20 496 17 14.25 10 13.38 8.63 4
QMS174 Store Door Sectional 6.53 496 17 14.25 10 13.38 8.63 4
Escutcheon Trims
QME120 Single Dummy Escutcheon 2.30 496 17 14.25 10 13.38 8.63 4
QME122 Full Dummy Escutcheon 3.80 496 17 14.25 10 13.38 8.63 4
QME130 Passage Escutcheon 6.04 496 17 14.25 10 13.38 8.63 4
QME140 Privacy Escutcheon 6.44 496 17 14.25 10 13.38 8.63 4
QME145 Privacy w/ Deadbolt Escutcheon 6.68 496 17 14.25 10 13.38 8.63 4
QME150 Entry Escutcheon 6.93 496 17 14.25 10 13.38 8.63 4
QME152 Exit Escutcheon 7.45 496 17 14.25 10 13.38 8.63 4
QME154 Corridor Escutcheon 7.51 496 17 14.25 10 13.38 8.63 4
QME158 Dormitory Escutcheon 7.65 496 17 14.25 10 13.38 8.63 4
QME160 Classroom Escutcheon 6.78 496 17 14.25 10 13.38 8.63 4
QME162 Classroom Security Escutcheon 7.41 496 17 14.25 10 13.38 8.63 4
QME164 Apartment Escutcheon 7.41 496 17 14.25 10 13.38 8.63 4
QME170 Storeroom Escutcheon 6.58 496 17 14.25 10 13.38 8.63 4
QME172 Institutional Escutcheon 7.18 496 17 14.25 10 13.38 8.63 4
QME174 Store Door Escutcheon 7.52 496 17 14.25 10 13.38 8.63 4
Deadlocks
QML180 Single Cylinder Deadlock 2.68 10 300 20.87 13.39 7.09 10 5.9 2.36
QML182 Double Cylinder Deadlock 2.95 10 300 20.87 13.39 7.09 10 5.9 2.36
QML184 Single Sided Deadlock 2.28 10 300 20.87 13.39 7.09 10 5.9 2.36
QML186 Classroom Deadlock 2.68 10 300 20.87 13.39 7.09 10 5.9 2.36
Case Box Unit Box
STANLEY Commercial Hardware
STANLEY Commercial Hardware
103
Weights & Measurements
Product Function Unit Weight Case Qty Pallet Qty Length Width Height Length Width Height
QCL100 SERIES - GRADE 1 CYLINDRICAL LOCKS
QCL120 Dummy 1.55 12 432 14 11.75 7.5 6.75 3.75 3.25
QCL130 Passage 4.7 6192 15.5 12.5 10.25 7.5 9.75 4
QCL135 Communicating 4.8 6192 15.5 12.5 10.25 7.5 9.75 4
QCL140 Privacy 4.8 6192 15.5 12.5 10.25 7.5 9.75 4
QCL150 Entry 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL151 Entry SFIC 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL160 Classroom 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL161 Classroom SFIC 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL170 Storeroom 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL171 Storeroom SFIC 5 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL200 SERIES - GRADE 2 CYLINDRICAL LOCKS
QCL220 Dummy 1.2 12 432 14 11.75 7.5 6.75 3.75 3.25
QCL230 Passage 4 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL235 Communicating 4 6 192 15.5 12.5 10.25 7.5 9.75 4
QCL240 Privacy 4.75 6192 15.5 12.5 10.25 7.5 9.75 4
QCL250 Entry 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCL251 Entry SFIC 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCL260 Classroom 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCL261 Classroom SFIC 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCL270 Storeroom 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCL271 Storeroom SFIC 4.5 6192 15.5 12.5 10.25 7.5 9.75 4
QCI200 SERIES - GRADE 2 INTERCONNECT LOCKS
QCI230 Single Locking 5.5 6192 15.5 12.25 10.63 9.63 7.5 4
QCI231 Single Locking SFIC 5.5 6192 15.5 12.25 10.63 9.63 7.5 4
QCI250 Double Locking 5.5 6192 15.5 12.25 10.63 9.63 7.5 4
QCI251 Double Locking SFIC 5.5 6192 15.5 12.25 10.63 9.63 7.5 4
QTL200 SERIES - GRADE 2 TUBULAR LOCKS
QTL220 Dummy 1.2 12 432 13.75 12.5 7 6 3.75 3.25
QTL230 Passage 2.3 10 320 17 13.25 8.75 8 6 3.25
QTL235 Communicating 2.5 10 320 17 13.25 8.75 8 6 3.25
QTL240 Privacy 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL250 Entry 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL251 Entry SFIC 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL260 Classroom 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL261 Classroom SFIC 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL270 Storeroom 2.8 10 320 17 13.25 8.75 8 6 3.25
QTL271 Storeroom SFIC 2.8 10 320 17 13.25 8.75 8 6 3.25
QDB100 SERIES - GRADE 1 DEADBOLTS
QDB180 Single Cylinder 2.5 12 384 15.75 13.5 6.5 345
QDB181 Single Cylinder SFIC 2.5 12 384 15.75 13.5 6.5 345
QDB182 Double Cylinder 2.8 12 384 15.75 13.5 6.5 345
QDB183 Double Cylinder SFIC 2.8 12 384 15.75 13.5 6.5 345
QDB186 Classroom 2.5 12 384 15.75 13.5 6.5 345
QDB187 Classroom SFIC 2.5 12 384 15.75 13.5 6.5 345
Case Box Unit Box
Weights & Measurements
Case Box Unit Box
Product Function Unit Weight Case Qty Pallet Qty Length Width Height Length Width Height
QDB200 SERIES - GRADE 2 DEADBOLTS
QDB280 Single Cylinder 2.3 12 384 15.75 13.5 6.5 345
QDB281 Single Cylinder SFIC 2.3 12 384 15.75 13.5 6.5 345
QDB282 Double Cylinder 2.7 12 384 15.75 13.5 6.5 345
QDB283 Double Cylinder SFIC 2.7 12 384 15.75 13.5 6.5 345
QDB284 Inside Turnbolt 212 384 15.75 13.5 6.5 345
QDB285 Indicator 1.27 12 384 15.75 13.5 6.5 345
QDB286 Classroom 2.3 12 384 15.75 13.5 6.5 345
QDB287 Classroom SFIC 2.3 12 384 15.75 13.5 6.5 345
QDB288 Key Control 2.25 12 384 15.75 13.5 6.5 345
QED100 SERIES - GRADE 1 HEAVY DUTY EXIT DEVICES & TRIMS
QED111 36” Rim Hex Dogging 11.7 140 36 10.25 536 10.25 5
QED112 36” Rim Cylinder Dogging 11.7 140 36 10.25 536 10.25 5
QED113 36” Rim Fire Rated 11.5 140 36 10.25 536 10.25 5
QED114 36” 7’ Surface Vertical Rod - Hex Dogging 14.7 140 36 10.25 536 10.25 5
QED114 36” 8’ Surface Vertical Rod - Hex Dogging 14.9 140 48 10.25 548 10.25 5
QED115 36” 7’ Surface Vertical Rod - Cylinder Dogging 14.7 140 36 10.25 536 10.25 5
QED115 36” 8’ Surface Vertical Rod - Cylinder Dogging 14.9 140 48 10.25 548 10.25 5
QED116 36” 7’ Surface Vertical Rod - Fire Rated 14.5 140 36 10.25 536 10.25 5
QED116 36” 8’ Surface Vertical Rod - Fire Rated 14.7 140 48 10.25 548 10.25 5
QED117 36” 7’ SVR - Less Bottom Rod - Hex Dogging 14.2 140 36 10.25 536 10.25 5
QED117 36” 8’ SVR - Less Bottom Rod - Hex Dogging 14.4 140 48 10.25 548 10.25 5
QED118 36” 7’ SVR - Less Bottom Rod - Cylinder Dogging 14.2 140 36 10.25 536 10.25 5
QED118 36” 8’ SVR - Less Bottom Rod - Cylinder Dogging 14.4 140 48 10.25 548 10.25 5
QED119 36” 7’ SVR - Less Bottom Rod - Fire Rated 14.7 140 36 10.25 536 10.25 5
QED119 36” 8’ SVR - Less Bottom Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED124 36” 7’ Concealed Vertical Rod - Hex Dogging 14.7 140 36 10.25 536 10.25 5
QED124 36” 8’ Concealed Vertical Rod - Hex Dogging 14.9 140 48 10.25 548 10.25 5
QED125 36” 7’ Concealed Vertical Rod - Cylinder Dogging 14.7 140 36 10.25 536 10.25 5
QED125 36” 8’ Concealed Vertical Rod - Cylinder Dogging 14.9 140 48 10.25 548 10.25 5
QED126 36” 7’ Concealed Vertical Rod - Fire Rated 14.5 140 36 10.25 536 10.25 5
QED126 36” 8’ Concealed Vertical Rod - Fire Rated 14.7 140 48 10.25 548 10.25 5
QED127 36” 7’ CVR - Less Bottom Rod - Hex Dogging 14.2 140 36 10.25 536 10.25 5
QED127 36” 8’ CVR - Less Bottom Rod - Hex Dogging 14.4 140 48 10.25 548 10.25 5
QED128 36” 7’ CVR - Less Bottom Rod - Cylinder Dogging 14.2 140 36 10.25 536 10.25 5
QED128 36” 8’ CVR - Less Bottom Rod - Cylinder Dogging 14.4 140 48 10.25 548 10.25 5
QED129 36” 7’ CVR - Less Bottom Rod - Fire Rated 14.7 140 36 10.25 536 10.25 5
QED129 36” 8’ CVR - Less Bottom Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED111 48” Rim Hex Dogging 11.9 140 48 10.25 548 10.25 5
QED112 48” Rim Cylinder Dogging 11.9 140 48 10.25 548 10.25 5
QED113 48” Rim Fire Rated 11.7 140 48 10.25 548 10.25 5
QED114 48” 7’ Surface Vertical Rod - Hex Dogging 14.9 140 48 10.25 548 10.25 5
QED114 48” 8’ Surface Vertical Rod - Hex Dogging 15.1 140 48 10.25 548 10.25 5
QED115 48” 7’ Surface Vertical Rod - Cylinder Dogging 14.9 140 48 10.25 548 10.25 5
QED115 48” 8’ Surface Vertical Rod - Cylinder Dogging 15.1 140 48 10.25 548 10.25 5
STANLEY Commercial Hardware
STANLEY Commercial Hardware
105
Weights & Measurements
Case Box Unit Box
Product Function Unit Weight Case Qty Pallet Qty Length Width Height Length Width Height
QED116 48” 7’ Surface Vertical Rod - Fire Rated 14.7 140 48 10.25 548 10.25 5
QED116 48” 8’ Surface Vertical Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED117 48” 7’ SVR - Less Bottom Rod - Hex Dogging 14.4 140 48 10.25 548 10.25 5
QED117 48” 8’ SVR - Less Bottom Rod - Hex Dogging 14.6 140 48 10.25 548 10.25 5
QED118 48” 7’ SVR - Less Bottom Rod - Cylinder Dogging 14.4 140 48 10.25 548 10.25 5
QED118 48” 8’ SVR - Less Bottom Rod - Cylinder Dogging 14.6 140 48 10.25 548 10.25 5
QED119 48” 7’ SVR - Less Bottom Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED119 48” 8’ SVR - Less Bottom Rod - Fire Rated 15.1 140 48 10.25 548 10.25 5
QED124 48” 7’ Concealed Vertical Rod - Hex Dogging 14.9 140 48 10.25 548 10.25 5
QED124 48” 8’ Concealed Vertical Rod - Hex Dogging 15.1 140 48 10.25 548 10.25 5
QED125 48” 7’ Concealed Vertical Rod - Cylinder Dogging 14.9 140 48 10.25 548 10.25 5
QED125 48” 8’ Concealed Vertical Rod - Cylinder Dogging 15.1 140 48 10.25 548 10.25 5
QED126 48” 7’ Concealed Vertical Rod - Fire Rated 14.7 140 48 10.25 548 10.25 5
QED126 48” 8’ Concealed Vertical Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED127 48” 7’ CVR - Less Bottom Rod - Hex Dogging 14.4 140 48 10.25 548 10.25 5
QED127 48” 8’ CVR - Less Bottom Rod - Hex Dogging 14.6 140 48 10.25 548 10.25 5
QED128 48” 7’ CVR - Less Bottom Rod - Cylinder Dogging 14.4 140 48 10.25 548 10.25 5
QED128 48” 8’ CVR - Less Bottom Rod - Cylinder Dogging 14.4 140 48 10.25 548 10.25 5
QED129 48” 7’ CVR - Less Bottom Rod - Fire Rated 14.9 140 48 10.25 548 10.25 5
QED129 48” 8’ CVR - Less Bottom Rod - Fire Rated 15.1 140 48 10.25 548 10.25 5
QET100 Series - Heavy Duty Escutcheon Exit Trim
QET120 Dummy Escutcheon Lever 2.2 6288 16.81 14.25 9.13 8.27 5.34 3.34
QET125 Dummy Escutcheon Pull 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET130 Passage Escutcheon Lever 2.2 6288 16.81 14.25 9.13 8.27 5.34 3.34
QET160 Keyed Escutcheon Lever (Classroom) 2.9 6288 16.81 14.25 9.13 8.27 5.34 3.34
QET165 Thumbpiece Escutcheon Pull 3.1 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET167 Thumbpiece Dummy Escutcheon Pull 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET170 Night Latch Escutcheon Lever (Storeroom) 2.8 6288 16.81 14.25 9.13 8.27 5.34 3.34
QET175 Night Latch Pull (Storeroom) 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET190 Flat/Blank Escutcheon Plate 1.4 6162 14.9 10.35 8.7 14.37 3.15 3.86
QED300 SERIES - GRADE 1 STANDARD DUTY EXIT DEVICES & TRIMS
QED311 36” Rim Hex Dogging 6.2 448 36.5 16 8.2 36.5 7.25 3.75
QED312 36” Rim Cylinder Dogging 6.2 448 36.5 16 8.2 36.5 7.25 3.75
QED313 36” Rim Fire Rated 6 4 48 36.5 16 8.2 36.5 7.25 3.75
QED314 36” 7’ Surface Vertical Rod - Hex Dogging 8.2 448 36.5 16 8.2 36.5 7.25 3.75
QED314 36” 8’ Surface Vertical Rod - Hex Dogging 8.4 448 36.5 16 8.2 36.5 7.25 3.75
QED315 36” 7’ Surface Vertical Rod - Cylinder Dogging 8.2 448 36.5 16 8.2 36.5 7.25 3.75
QED315 36” 8’ Surface Vertical Rod - Cylinder Dogging 8.4 448 36.5 16 8.2 36.5 7.25 3.75
QED316 36” 7’ Surface Vertical Rod - Fire Rated 8 4 48 36.5 16 8.2 36.5 7.25 3.75
QED316 36” 8’ Surface Vertical Rod - Fire Rated 8.2 448 36.5 16 8.2 36.5 7.25 3.75
QED317 36” 7’ SVR - Less Bottom Rod - Hex Dogging 8 4 48 36.5 16 8.2 36.5 7.25 3.75
QED317 36” 8’ SVR - Less Bottom Rod - Hex Dogging 8.2 448 36.5 16 8.2 36.5 7.25 3.75
QED318 36” 7’ SVR - Less Bottom Rod - Cylinder Dogging 8 4 48 36.5 16 8.2 36.5 7.25 3.75
QED318 36” 8’ SVR - Less Bottom Rod - Cylinder Dogging 8.2 448 36.5 16 8.2 36.5 7.25 3.75
QED319 36” 7’ SVR - Less Bottom Rod - Fire Rated 8.2 448 36.5 16 8.2 36.5 7.25 3.75
STANLEY Commercial Hardware
Weights & Measurements
Case Box Unit Box
Product Function Unit Weight Case Qty Pallet Qty Length Width Height Length Width Height
QED319 36” 8’ SVR - Less Bottom Rod - Fire Rated 8.4 448 36.5 16 8.2 36.5 7.25 3.75
QED311 48” Rim Hex Dogging 6.4 448 48.5 16 8.2 48.5 7.25 3.75
QED312 48” Rim Cylinder Dogging 6.4 448 48.5 16 8.2 48.5 7.25 3.75
QED313 48” Rim Fire Rated 6.2 448 48.5 16 8.2 48.5 7.25 3.75
QED314 48” 7’ Surface Vertical Rod - Hex Dogging 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED314 48” 8’ Surface Vertical Rod - Hex Dogging 8.6 448 48.5 16 8.2 48.5 7.25 3.75
QED315 48” 7’ Surface Vertical Rod - Cylinder Dogging 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED315 48” 8’ Surface Vertical Rod - Cylinder Dogging 8.6 448 48.5 16 8.2 48.5 7.25 3.75
QED316 48” 7’ Surface Vertical Rod - Fire Rated 8.2 448 48.5 16 8.2 48.5 7.25 3.75
QED316 48” 8’ Surface Vertical Rod - Fire Rated 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED317 48” 7’ SVR - Less Bottom Rod - Hex Dogging 8.2 448 48.5 16 8.2 48.5 7.25 3.75
QED317 48” 8’ SVR - Less Bottom Rod - Hex Dogging 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED318 48” 7’ SVR - Less Bottom Rod - Cylinder Dogging 8.2 448 48.5 16 8.2 48.5 7.25 3.75
QED318 48” 8’ SVR - Less Bottom Rod - Cylinder Dogging 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED319 48” 7’ SVR - Less Bottom Rod - Fire Rated 8.4 448 48.5 16 8.2 48.5 7.25 3.75
QED319 48” 8’ SVR - Less Bottom Rod - Fire Rated 8.6 448 48.5 16 8.2 48.5 7.25 3.75
QET300 Series - Standard Duty Escutcheon Exit Trim
QET320 Dummy Escutcheon Lever 2.25 12 324 16.81 14.25 9.13 8.27 5.34 3.34
QET325 Dummy Escutcheon Pull 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET330 Passage Escutcheon Lever 2.8 12 324 16.81 14.25 9.13 8.27 5.34 3.34
QET360 Keyed Escutcheon Lever (Classroom) 2.8 12 324 16.81 14.25 9.13 8.27 5.34 3.34
QET365 Thumbpiece Escutcheon Pull 3.1 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET367 Thumbpiece Dummy Escutcheon Pull 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET370 Night Latch Escutcheon Lever (Storeroom) 2.8 12 324 16.81 14.25 9.13 8.27 5.34 3.34
QET375 Night Latch Pull (Storeroom) 1.9 6162 14.9 10.35 8.7 14.37 3.15 3.86
QET377 Gull Wing Trim (Storeroom) 1.7 12 324 16.81 14.25 9.13 8.27 5.34 3.34
QET390 Flat/Blank Escutcheon Plate 1.4 6162 14.9 10.35 8.7 14.37 3.15 3.86
QRT300 Series - Standard Duty Round Rose Trim
QRT320 Dummy Round Rose 2.07 12 432 14 11.75 7.5 7.5 6.75 3.75
QRT330 Passage Round Rose 2.07 12 432 14 11.75 7.5 7.5 6.75 3.75
QRT360 Entry Round Rose (Classroom) 2.8 12 432 14 11.75 7.5 7.5 6.75 3.75
QRT361 Entry Round Rose SFIC (Classroom) 2.8 12 432 14 11.75 7.5 7.5 6.75 3.75
QRT370 Night Latch Round Rose (Storeroom) 2.8 12 432 14 11.75 7.5 7.5 6.75 3.75
QRT371 Night Latch Round Rose SFIC (Storeroom) 2.8 12 432 14 11.75 7.5 7.5 6.75 3.75
DOOR CLOSERS
Extra Duty
QDC111 Tri-pack 12.3 3126 14.25 16.5 614.25 5.5 6
QDC112 Tri-pack with Hold Open 13.3 1138 14.25 5.5 714.25 5.5 7
QDC113 Extra Duty Arm with Compression Stop 14 1138 14.25 5.5 714.25 5.5 7
QDC114 Extra Duty Arm with Hold Open and
Compression Stop 14 1115 14.25 5.5 814.25 5.5 8
QDC115 Extra Duty Arm 13.6 1138 14.25 5.5 714.25 5.5 7
QDC116 Extra Duty Arm with Hold Open 13.8 1138 14.25 5.5 714.25 5.5 7
Heavy Duty
QDC211 Tri-pack 6.6 6180 14.25 15.75 7.5 13.5 4.875 3.25
QDC212 Tri-pack with Hold Open 8 6 180 14.25 15.75 7.5 13.5 4.875 3.25
QDC213 Heavy Duty Arm with Compression Stop 8.5 3216 14.25 15.75 7.5 13.375 7.875 3.25
QDC214 Heavy Duty Arm with Hold Open and
Compression Stop 8.7 3216 14.25 15.75 7.5 13.375 7.875 3.25
Standard Duty
QDC311 Tri-pack 6.3 6180 14.25 15.75 7.5 13.5 4.875 3.25
QDC312 Tri-pack with Hold Open 7.7 6180 14.25 15.75 7.5 13.5 4.875 3.25
QDC313 Heavy Duty Arm with Compression Stop 8.2 3216 14.25 15.75 7.5 13.375 7.875 3.25
QDC314 Heavy Duty Arm with Hold Open and
Compression Stop 8.4 3216 14.25 15.75 7.5 13.375 7.875 3.25
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
107
Quoting & Ordering
Price List 67CH
QUOTING: Price quotations are based on one (1) shipment to one
(1) location, and are valid as identied in the quote but in no case
longer than one year from the date of the quote. All exceptions will be
evaluated on an individual basis.
All quotation requests will be provided by the Stanley Representative
where the project is located.
QUOTING PROCESS AND PROCEDURES: The following
information is necessary to secure a price quotation from Stanley.
• Distributor Name
• Distributor Location
• Distributor Contact Name & Phone Number
• Distributor e-mail contact
• Project Name
• Project Location
• Bid Date
• Architects Name, Phone Number, and Architects Location
• Specication Writer Name, Phone Number and Location
• Competitive Inuence / Specication
• List of materials to be quoted
Every attempt will be made by Stanley to provide the price quotation
in a timely manner. Upon completion, you will receive a copy of the
quotation which will also include a valid quotation number. Once
the project is secured, a copy of the quotation must accompany
your purchase order and be forwarded to Stanley Customer Service
Department in Indianapolis for processing.
NON-STANDARD PRODUCT REQUEST: Please contact your
Stanley Representative to complete a Non-Standard Product Request
Form. All requests should be submitted to the following email address:
Email: product_request@sbdinc.com
Upon receipt of a special order request, Stanley will review the
conguration and determine if Stanley is capable of making the special
order product and will provide a response to the customer. If Stanley is
able to make the special order product, Stanley will provide a specic
sku/conguration to the customer for the special order product. This
sku/conguration must be identied on all Purchase Orders. In addition,
the Purchase Order must be marked as a “Special Order”.
ORDERING: The following information is required for Stanley to
successfully process any order:
• Itemized Purchase Order (PO)
• Stanley Approved Quote
Please send all orders to BAS-orderentry.us@dormakaba.com or by
fax to 877-835-1030
NOTE: for detailed information on how to place an order for Stanley
Best products as well as Stanley masterkey services please see the
detailed section regarding “Stanley Best Ordering”.
ADD ON ORDERS FOR QUOTED PROJECTS: To place an add-
on order from a quoted project the Distributor must include the original
quote, PO number and/or Stanley’s original order number. Add-On orders
will be accepted for a period one (1) year from the original order date.
Add-On orders received that are outside of the aforementioned period
will be forwarded to the Stanley Representative for re-quote.
STOCKING ORDERS: All orders for stock replenishment should be
marked as “Stock” and indicate a “Ship To” address that coincides with
the stocking Distributor warehouse location.
INCOMPLETE ORDER PROCESS: All orders are screened upon
receipt for complete information. If an order is received incomplete,
Stanley Customer Service will make one (1) attempt to contact a
Distributor directly for the missing requirements. If the information is not
made available to Stanley at that time the order will be referred to the
local Stanley Representative for resolution. All incomplete orders will be
cancelled if not resolved after sixty (60) calendar days.
PRICE DISCREPANCY PROCESS: All entered orders are reviewed
by Stanley Customer Service for accuracy and pricing consistency
between the Distributor and Stanley. Any order determined by Stanley,
in its sole and absolute discretion, to have a value greater than the Total
Price shown on the Distributor purchase order will be held by Stanley for
a Price Discrepancy. Stanley quotes are also reviewed to ensure that they
are complete, approved, and match the PO. Due to pricing sensitivity,
all price discrepancies must be resolved exclusively by your Stanley
Representative.
ORDER CANCELLATION/CHANGES: All requests for Order
Cancellations and Changes (Quantity, Shipping, Finish, Function, etc)
should be sent directly to Stanley Customer Service. Requests via phone
will be accepted, but must be accompanied by a written request. Factory
Order Number, PO Number, Account Info, and Detailed Changes must be
clearly indicated. Change requests can be submitted via the following
methods:
Email: BAS-cshelp.us@dormakaba.com
Fax: 1-877-835-1030
All order cancellations or changes will be subject to a cancellation fee as
dened in Stanley’s Terms and Conditions of Sale.
PRODUCTION SCHEDULING AND “DO NOT SHIP BEFORE”
REQUESTS: All orders are scheduled for production and shipping based
on current production lead times and availability. Scheduling is completed
only when an order is released from both credit and pricing review.
Exceptions to this policy are made only when the PO is clearly marked:
“Do Not Ship Before” followed by the date. (Required Date, Expected
Date, etc. do not apply) These orders will be scheduled to ship on or after
the date listed.
Changes to “Do Not Ship Before” dates are required in writing and
should be sent to: BAS-cshelp.us@dormakaba.com.
Be advised orders not clearly marked with a “Do Not Ship Before”
designation will be payable within normal terms from the actual
shipment date.
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
108
Quoting & Ordering
Price List 67CH
EXPEDITE REQUESTS:
• Expedite requests will be reviewed and accommodated by Stanley
based on production lead times and availability.
• See the then current Stanley Quick Ship Program for details.
WHOLESALE PURCHASE: Distributors are also free to utilize
Stanley’s Authorized Wholesalers to purchase product. Stanley does
not make any guarantee of availability or pricing for purchases from
an Authorized Wholesaler and the discounts afforded to Distributor by
STANLEY shall not apply to purchases from an Authorized Wholesaler.
The terms and conditions and price of product shall be mutually agreed
between Distributor and Wholesaler.
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
109
❏ Return for Replacement ❏ Return for Credit
Date of Request:_________________________________
Original Order: __________________________________
Date of Request:_________________________________
Original P.O.: ____________________________________ ❏ Manufacturing Defect
Invoice #: ______________________________________ ❏ Warranty Evaluation
Customer Name: _________________________________ ❏ Missing Parts
Account Number: ________________________________ ❏ Wrong Matterials Received
Address: _______________________________________ ❏ Wrong Matterials Ordered
City: __________________________________________ ❏ Wrong Quantity
State: __________________________________________ ❏ Return Inventory
Contact Name: __________________________________ ❏ Other: _______________________________________
Email: _________________________________________
Phone: _________________________________________
❏ Ship Replacement Material to Address Above ❏ Ship Replacement Material to Address on Order
DETAILED DESCRIPTION OF DEFECT OR REASON FOR RETURN
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
Please e-mail completed form to BAS-rgacreditgrp.us@dormakaba.com or Fax to 1-888-214-1918
NATURE OF PROBLEM
Note: All returns shall be subject to Stanley’s current Terms
of Sale and Warranty as outlined in Stanley’s price catalog.
RETURN MATERIAL
Line Item # Quantity Product Nomenclature Product Description
Return Order Request
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware STANLEY Commercial Hardware
110
RA REQUESTS: A Return Authorization Form must be utilized to return
defective products still under warranty or products deemed repairable
by Stanley. All products returned to Stanley must have a correct Return
Authorization (RA) number applied to the outside of the shipping carton.
All products must be returned within sixty (60) calendar days of RA issue
date. This process can take up to seven (7) days after product is received
at Stanley’s factory. If a defective product presents a security risk, an
advance replacement may be requested.
RA PROCESS: Requests for warranty related returns can be
initiated by submitting an email to
BAS-rgacreditgrp.us@dormakaba.com.
The RA Request Form must be completed entirely to process an RA. The
following information will be needed:
• End User Name • Sales Order Number
• Account Number • Item Number
• Contact Name • Item Quantity
• Phone Number • Description of the Problem
• Purchaser Order Number
1. Upon review and approval of the submitted RA request, a claim
number is logged and provided back to the requestor by a
Stanley Team member.
2. Once a claim number is issued, this number should be noted
on all references and communications regarding the applicable
situation to ensure a claim is easily identied.
3. Defective product should be returned to the address below. The
shipment must be marked with the approved RA claim number
to ensure prompt processing and attention. All shipping charges
prepaid by customer.
4. When material is received at Stanley’s factory, Stanley will assess
and determine the nature of the defect.
5. Defective goods are replaced upon Stanley’s determination.
6. Credit for material and freight is issued only if deemed
appropriate by Stanley. If approved, credit is initiated and
a credit memo is mailed to the Distributor within fteen (15)
business days.
PURCHASE ORDERS:
A Purchase Order (PO) will be required if the Product is:
1. Defective and not under warranty, or
2. An advance replacement is required without verication of whether
the product is defective and under warranty.
Please send Purchase Orders to the following:
• Preferred Method Email:
BAS-rgacreditgrp.us@dormakaba.com
• Fax: 1-877-835-1030
RETURNED AUTHORIZATION (RA)
October 2015
BEST Access Solutions, Inc.
Attn: Returns Department
6161 East 75th Street
Indianapolis, IN 46250
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
111
RA POLICY: A Return Authorization Form must be utilized to return products that
are not defective and otherwise in a resalable condition. Only goods with an invoice
date of less than one (1) year will be considered for a non-warranty related return.
All materials returned to Stanley for any reason (other than warranty), must have
a correct Return Authorization (RA) number applied to the outside of the shipping
carton. A thirty percent (30%) re-stocking charge (of the purchase price) will be
applied to the Distributor’s account for orders returned, including orders that were
placed by customer in error. Transportation charges of returned goods must be
prepaid by the Distributor. All goods must be returned within sixty (60) calendar
days of RA issue date. All goods must be returned in original packaging and be in
resalable condition. Product not returned in saleable condition is subject to disposal
by Stanley with no credit issued. Commercial Hardware items that are special made
to order items will not be returned under any circumstances.
RA PROCESS: Requests for non-warranty related returns can be initiated by
submitting an email to BAS-rgacreditgrp.us@dormakaba.com.
The RA Request Form must be completed entirely to process an RA. The following
information will be needed:
• End User Name • Sales Order Number
• Account Number • Item Number
• Contact Name • Item Quantity
• Phone Number • Description of the Problem
• Purchaser Order Number
1. Upon review and approval of the submitted RA request, a claim number is
logged and provided back to the requestor by a Stanley Team member:
2. Once a claim number is issued, this number should be noted on all references
and communications concerning said RA.
3. Product should be returned to the address below. The shipment must be
marked with the approved RA claim number to ensure prompt processing and
attention. All shipping charges prepaid by customer.
4. The RA will be processed once material is received at Stanley’s factory provided
it is received in its original packaging and is in saleable condition.
5. Credit is issued to the Distributor account and a credit memo is mailed to the
Distributor.
Any quality issues (missing parts, wrong parts, handing,
nish, etc) should be submitted electronically to:
BAS-rgacreditgrp.us@dormakaba.com or your Local
Stanley Representative.
Please reference your original Purchase Order (PO) Number,
Factory Order Number, Distributor Account, Contact
Information (E-mail/Fax), and include a detailed description
of the issue.
1) ITEMS MISSING FROM A SHIPMENT: If you
have signed your shipment short, Stanley Customer Service
will promptly issue a No Charge replacement order for the
missing products.
If the shipment was not signed short but after review,
Stanley Customer Service determines (based on shipping
weights, packing lists, etc) that the order was indeed
shipped short, a No Charge replacement will be issued.
If Stanley Customer Service cannot verify a shipping error,
an advance replacement order will be entered, charged,
and expedited to the Distributor. The quality issue will be
forwarded to the Return Authorization Credit Group for
resolution.
If it is determined that the item was omitted from the order
due to a Stanley order entry error, a change order will be
entered and expedited for the missing products.
Please see Stanley’s price book for further detail.
2) WRONG ITEMS RECEIVED (parts, handing, function,
nish, etc):
Advanced replacements will be issued for any wrong items
received. Such orders will becharged based on pricing/
discounts from the original order. The issue will be
forwarded to Stanley’s Return Authorization Credit Group
for resolution.
Any quality issue that is determined to be either a Stanley
order entry and/or manufacturing error will have an
advanced replacement order entered and will be expedited.
An RA will be issued to return the incorrect products.
No re-stock fee will apply for Stanley order entry and/or
manufacturing errors.
RETURNED AUTHORIZATION (RA) NON-WARRANTY FULFILLMENT ISSUES
October 2015 October 2015
BEST Access Solutions, Inc.
Attn: Returns Department
6161 East 75th Street
Indianapolis, IN 46250
Price List 67CH
PURCHASE ORDER (ATTACH KEY SYSTEM SUMMARY)
CUSTOMER SERVICE:
(855) 365-2407
FOR ADDITIONAL INFORMATION, CONTACT: STANLEY BLACK & DECKER HHI USE ONLY
NAME: SALES ORDER #:
FAX ORDERS TO:
(877) 835-1030
PHONE: RED’D/EDITED BY: DATE:
E-MAIL: ENTERED BY: DATE:
BILL TO CUSTOMER ID: DATE WRITTEN: REQUESTED SHIP DATE: PURCHASE ORDER #: QUOTE #: VERIFIED BY: DATE:
ORDER TYPE: PCR/BID#:
SOLD TO: Customer Name & Address SHIP TO: Customer Name & Address SPECIAL INSTRUCTIONS/JOB NAME ETC.:
• • • REQUIRED INFORMATION FOR ORDERING PROCESSING • • •
PRODUCT DESCRIPTION CODES KEYING CONFIGURATION MULTIPLIER DETAILED NOTES & INFORMATION
Line
Item Qty
Series/
Function
(Part #)
Style Finish Latch Strike Keyway Keying
Door/Unit
Markings or
Key Groups
Key
Symbol(s)
MK
Symbol(s)
List Price
(Required)
Net Price
(Auto Fill)
Additional Details
to Complete Order
• • • REQUIRED INFORMATION FOR ORDERING PROCESSING • • •
PRODUCT DESCRIPTION CODES KEYING CONFIGURATION MULTIPLIER DETAILED NOTES & INFORMATION
Line
Item Qty
Series/
Function
(Part #)
Style Finish Latch Strike Keyway Keying
Door/Unit
Markings or
Key Groups
Key
Symbol(s)
MK
Symbol(s)
List Price
(Required)
Net Price
(Auto Fill)
Additional Details
to Complete Order
BILL TO CUSTOMER ID: CUSTOMER NAME: PURCHASE ORDER #: DATE WRITTEN: JOB NAME:
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030
STANLEY Commercial Hardware
114
Keying System Summary
SOLD TO:
1. JOB NAME & ADDRESS
2. SYSTEM STATUS
3. SYSTEM TYPE
4. KEYS
SHIP TO:
5. KEY QUANTITY
6. CROSS KEYING
SHEET DATE: PURCHASE ORDER #: SALES ORDER #:
NEW EXISTING
SKD
MK
GMK
GGMK
Maison (Cross Keying)
CK (Construction Keying)
YALE - GA
SARGENT - LA
SFIC - F (IC CORE)
SCHLAGE - C
WEISER
KWIKSET
KEYWAY SELECTION
KEY & CYL STAMPING
VKC2
VKC4
CKC2
CKC3
DND
VKC1
VKC3
VKC0 No Bitting or Key Set
Stamping on Keys
Visual Key Stamping
(Keys Only)
Visual Key Control
(Cylinder face only -
levers & deadbolts)
Concealed Key Control
Cylinders & VKC Keys
Concealed Key Control
Cylinders Only
MASTER LEVEL STAMP QTY
GGM
GM
MK/GROUP
OTHER
OTHER
OTHER
*Two cut change keys are standard per lockset/cylinder.
Key blanks cannot be substituted for cut keys
CHANGE KEYS* QTY
PER CYLINDER/LOCKSET
PER KEYED ALIKE GROUP
KEY SYMBOL TO BE OPERATED BY (OBY)
1 of 2
Do Not Duplicate
(Keys Stamped)
- Keys: up to 6 characters
- Cylinder face: Up to 4 characters
- Cylinder side: Up to 6 characters
Special Stamping
(other than standard
symbols)
Visual Key Control
(Keys & Cylinder face)
STANLEY Commercial Hardware
Keying System Summary
Price List 67CH
www.stanleyhardwarefordoors.com • Phone: (855) 365-2407 • Fax: (877) 835-1030 115
Keying System SummaryKeying System Summary
Price List 67CH
SHEET DATE: PURCHASE ORDER #: SALES ORDER #:
2 of 2
PACK CHANGE KEYS WITH
LOCKS/CYLINDERS (STANDARD)
PACK CHANGE KEYS SEPARATELY
LABEL ENVELOPES:
KEY SYMBOL DOOR NUMBER
JOB NAME OTHER*
*MARKINGS FOR OTHER:
SHIP CHANGE KEYS TO:
ATTENTION:
SHIP CONSTRUCTION KEYS TO:
ATTENTION:
PROVIDE BITTING LIST FOR THIS ORDER:
YES NO
MAIL BITTING LIST TO:
ATTENTION:
LETTER OF AUTHORIZATION:
ATTACHED
NAME OF INDIVIDUAL IN YOUR ORGANIZATION WHO
IS KNOWLEDGEABLE ABOUT THIS PROJECT, SHOULD
ANY CLARIFICATION BY NECESSARY (Please Print):
NAME:
FAX #:
PHONE #:
THIS FORM HAS BEEN COMPLETED BY (Please Print):
NAME:
8. SHIPPING INSTRUCTIONS FOR MASTER KEYS
9. SHIPPING INSTRUCTIONS FOR CONSTRUCTION KEYS
SHIP MASTER KEYS TO:
ATTENTION:
10. BITTING LIST
11. CONTACT
ADDITIONAL INFORMATION (ATTACH)
SOLD TO:
7. PACKAGING & MARKINGS
PL67CH • 01/18
© 2017 dormakaba Holding. All rights reserved.
© 2017 Stanley Black & Decker, Inc. STANLEY® and the STANLEY® Notched Rectangle logo are
registered trademarks of Stanley Black & Decker Inc. or one of its affiliates, and are used under license
6161 East 75th Street
Indianapolis, IN 46250 USA
Phone 855-365-2407
stanleyhardwarefordoors.com
dormakaba.com
