Star Sources Electronic Technology ST-RFM093 27MHZ RF WIRELESS MOUSE User Manual ST RFM093 user menual

Shenzhen Star Sources Electronic Technology Co., Ltd. 27MHZ RF WIRELESS MOUSE ST RFM093 user menual

user manual

ST- RFM093 Simple Menu This is 27MHz Radio Frequency Wireless Mouse. You will find one mouse, one USB receiver and 2 pcs AAA battery. Pls follow up below steps to connect this mouse to computer. 1) To push the top half of the button in the centre of the mouse( indicated below) to release cover to pull back this cover, insert 2 pcs battery according to the appropriate polarity marks( +, - ), close the battery cover; 2) Push the lower half of the button in centre of the mouse( indicated below) to release USB receiver. 3) Plug USB receiver into computer USB port; 4) Press USB receiver Identification Code button, then turn over your mouse and press mouse bottom Identification Code button; Your personal identification code can be automatically completed. The interval between pressing two Identification Codes cannot exceed 5 seconds. Then you can use this mouse freely. If the mouse is not active, Pls repeat steps 4. System requirements: Windows 98/2000/NT/ME/XP/Vista & MAC OS 8.6 above
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 　 Reorient or relocate the receiving antenna. 　 Increase the separation between the equipment and receiver. 　 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 　 Consult the dealer or an experienced radio/TV technician for help.

Navigation menu