StarTech com ST121WHDS Wireless HDMI 60 GHz Extender-Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3426537
Application ID	rjIZVlg9rFcdK6O5msBKjw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.12kB (851501 bits)
Date Submitted	2017-06-14 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2016-08-08 13:06:56
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-03-13 11:03:39
Document Title	Users Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

Quick-start guide
HDMI Over Wireless Extender - 1080p - 65 ft.
ST121WHDS
Packaging contents
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Product overview
Transmitter
Wireless
antenna
•
•
•
•
•
•
•
Link LED
Power LED Function
button
1 x wireless transmitter
1 x wireless receiver
2 x universal power adapters (NA, EU, UK)
2 x USB power cables
2 x vertical stands
2 x adhesive mounting strips
1 x quick-start guide
Requirements
• A local HDMI® video source, such as a computer or Blu-ray™ player
with cabling.
• A remote HDMI display with cabling.
About this product
This HDMI over wireless extender lets you wirelessly transmit the
video and audio signal from an HDMI source to a remote display
located up to 65 ft. (20 m) away. The extender kit uses wireless
technology to transmit an uncompressed, high-definition 1080p
HDMI signal. This devive will NOT allowed to operate on aircraft.
Preparing your site
Power port
(Micro-USB)
HDMI
In port
2. Set up your remote HDMI display in your desired location, and
position the receiver near your display..
Receiver
Link LED
Power LED
Wireless
antenna
1. Set up your local HDMI video source in your desired location, and
position the transmitter near the video source.
Power
button
Note:
• The maximum supported distance between the transmitter
and the receiver is 65 feet. If the wireless signal is obstructed
by walls, or other interference the signal quality and maximum
distance may be reduced.
• Ensure there is an available USB power source or an AC power
outlet, at your local and remote locations.
• Ensure each device is powered off before you begin
installation.
Hardware installation
1. Connect an HDMI cable (not included) to the HDMI In port on
the transmitter and to the HDMI video output port on your video
source device.
Power port
(Micro-USB)
HDMI
Out port
*actual product may vary from photos
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/ST121WHDS
Note: Both the transmitter and the receiver have a
wireless antenna located on the front surface. For optimal
performance, it’s important to ensure the wireless antennas
on each device are facing toward the general direction of each
other.
Manual Revision: 08/08/2016
2. Connect the included USB cable to the Power port (Micro-USB)
on the transmitter and to a nearby USB power source. If you’re
using the included power adapter, connect the power adapter
to an AC power outlet and connect the USB cable to the power
outlet.
3. Connect an HDMI cable (not included) to the HDMI Out port on
the receiver and to the HDMI video input port on your display.
4. Connect the included USB cable to the Power port (Micro-USB)
on the receiver and to a nearby USB power source. If you’re using
the included power adapter, connect the power adapter to an AC
power outlet and connect the USB cable to the power outlet.
5. Power up your local video source.
6. Power up your remote display.
LED indicators
The transmitter and receiver each have two LED indicators that light
up to notify you of the video status. Please review the table below to
interpret the LED activity.
LED
Link
Activity
Status
Off
The transmitter or receiver is powered off or
in sleep mode.
Slow
blinking
Transmitter and receiver are establishing
connection.
Fast
blinking
Transmitter and receiver are connected.
Off
The transmitter or receiver does not have
power connected.
Solid on
The transmitter or receiver is connected to
an active power connection.
Power
Function button
The function buttons, located on the transmitter and receiver, can be
used to perform various tasks. Please review the table below to see
what tasks can be performed, and how to perform them.
Function
Description
Procedure
Wake up
Takes the transmitter
or receiver out of sleep
mode.
Press and release the
Function button.
Factory
default
Restores the
transmitter or receiver
to original settings.
Press and hold the Function
button for 10 seconds.
Notes:
• Sleep status occurs if the transmitter or receiver fails to establish a
connection after several minutes of attempting.
• The factory default function can be performed as a
troubleshooting step, if your transmitter and receiver are both
powered on and not establishing a connecting.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
environment .This
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
IS E D
Warning
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS st andard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement :
This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled envi ronment .
This equipmen t should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux ISED RF limites d'exposition aux radiations dans un
environnement non contrôlé. Cet émetteur ne doit pas être situé ou opérant en conjonction avec
une autre antenne ou émetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:08:08 13:06:56-04:00
Creator                         : Adobe InDesign CC 2015 (Windows)
Modify Date                     : 2017:03:13 11:03:39-07:00
Has XFA                         : No
Language                        : en-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2017:03:13 11:03:39-07:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:daf1af05-c089-4d48-a875-a57496131df0
Original Document ID            : xmp.did:324829662535E011BC8FF5AD70CEF5AC
Document ID                     : xmp.id:5565415f-c708-5f46-be27-d94097e9834d
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:45cc3248-c0ff-484a-bfef-f85ad4bc7fc5
Derived From Document ID        : xmp.did:cd62d73b-20f5-a94f-ad8c-a282156b0e9a
Derived From Original Document ID: xmp.did:324829662535E011BC8FF5AD70CEF5AC
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:08:08 13:06:56-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 3

EXIF Metadata provided by EXIF.tools