Statsignal Systems 900187002 Wireless Meter User Manual Focus Users Guide ver 3

Statsignal Systems Inc Wireless Meter Focus Users Guide ver 3

Manual

2859 Paces Ferry Road, Suite 700 Atlanta, Georgia 30339 Phone: 404-252-5512 Fax: 678-202-6823 USERS GUIDE FOR FOCUS METER Model: 100187002 FCCID: PK9-900187002 Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with FCC’s RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Note: The Focus will be used : i) for residential and commercial metering applications ii) at homes and businesses The Focus device requires professional installation by qualified personnel. Use the instructions below to install the FOCUS Meter for the StatSignal System. 1. Remove the unit from its shipping carton. 2. Identify the meter socket in which the meter is to be installed. Airflow to the unit may be blocked because the unit generates very little heat (less than 200 milliwatts). 3. Turn breaker off at meter socket.
4. Insert Meter ensuring all four (4) spades are in contact. 5. Turn breaker back on. At this point, the Meter is ready to function. The AiNode will load all necessary data to the meter when it completes registration. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the meter off, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Consult StatSignal or an experienced radio/TC technician for help.

Navigation menu