Statsignal Systems ISC160 Industrial Site Controller User Manual Installation Manual

Statsignal Systems Inc Industrial Site Controller Installation Manual

Installation Manual

To: Steve Behmsteve.behm@ckc.comFrom: Tim HarringtonTim.Harrington@fcc.govFCC Equipment Authorization BranchRe: FCC ID: BCR-RPT-MMR8-19 Applicant: Andrew Wireless Innovations Group Correspondence Number: 12541731 Confirmation Number: TC186205Date of Original E-Mail: 06/09/2004Subject: auditGeneral comment - this FCC ID applies only to the remote unit of the host/remote system. Host ("master") unit may require separate FCC certification.TCB to address:1) Please revise this application to be consistent with AMPLIFIER, BOOSTER, AND REPEATER filing procedures:http://hraunfoss.fcc.gov/eas_public/SilverStream/Pages/pg_html_fts_res.html?letter=1370For example, change eqpt class to PCB, and explain how present filing meets TNB requirements, or revise test report if necessary.2) Please submit new photo or sketch showing location(s) of FCC ID label - cannot determine from present filing3) External PHOTO exhibit shows only engineering DRAWING - please revise4) Please submit block diagram and/or installation operating instructions for entire host/remote system, including host uplink port connection (connect to antenna, amp, or base station) and RF power info.The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c).DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted.Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.
To: Dustin Oaksdustin.oaks@nemko.comFrom: Tim HarringtonTim.Harrington@fcc.govFCC Equipment Authorization BranchRe: FCC ID: BCR-RPT-MMR8-19 Applicant: Andrew Wireless Innovations Group Correspondence Number: 12542731 Confirmation Number: TC186205Date of Original E-Mail: 06/09/2004Subject: auditGeneral comment - this FCC ID applies only to the remote unit of the host/remote system. Host ("master") unit may require separate FCC certification.TCB to address:1) Please revise this application to be consistent with AMPLIFIER, BOOSTER, AND REPEATER filing procedures:http://hraunfoss.fcc.gov/eas_public/SilverStream/Pages/pg_html_fts_res.html?letter=1370For example, change eqpt class to PCB, and explain how present filing meets TNB requirements, or revise test report if necessary.2) Please submit new photo or sketch showing location(s) of FCC ID label - cannot determine from present filing3) External PHOTO exhibit shows only engineering DRAWING - please revise4) Please submit block diagram and/or installation operating instructions for entire host/remote system, including host uplink port connection (connect to antenna, amp, or base station) and RF power info.The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal pursuant to Section 2.917(c).DO NOT Reply to this email by using the Reply button. In order for your response to be processed expeditiously, you must upload your response via the Internet at www.fcc.gov, E-Filing, OET TCB/Accreditor Electronic Filing, TCB Login, Submit Correspondence. Also, please note that partial responses increase processing time and should not be submitted.Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

Navigation menu