SteelSeries ApS GC-00006 Gaming Controller User Manual

SteelSeries ApS Gaming Controller

User Manual

 GamingControllerModelname:GC-00006 一、 Pruduct picture:Gaming Controller + Transceiver  二、 product accessories   1. Gaming Controller                1PCS   2. Transceiver                      1PCS(FCC ID:ZHK-GC-00006)   3. Product specification            1PCS 4. USB Date line                    1PCS 5. No. 5 dry cell(AA)             2PIECES  三、 Product presentation 1. 2.4G wileless gamepad:(1 handle+1 USB receiving head)。 2. The top contains a MicroUSB interface. Support wired + wireless dual mode (MicroUSB port does not support charging function). When the USB receiver and the MicroUSB port are connected to the host at the same time, priority is given to the wired mode (the wired mode is turned on and the wireless mode is turned off). 3.Includes 4-axis + 12-button standard PC game controller features for dual vibration (using the Alps rocker module). 4. Win10 built-in driver support, standard Xinput handle, touch pad.  5. Pluggable touchpad at the top of the product, functions with notebook touchpad hid device, HID equipment ,no additional drive, support for (PTP).  Synchronous key
  6. Add Xinput handle touch pad under USB HUB,.  7. Front bottom 3 keys, output standard HID key value. Macro and key mapping function is realized by PC driver.   8.RGB LED is located at the top of the handle and on the USB receiver header, indicating different channels (up to 4 channels are supported).   9.USB receiver contains a mandatory connection button.  10.HOME key is used to return to the main page of the program and switch machine.  11.2 AA battery powered, idle for 5 minutes into dormant mode. Battery bin compatible with Xbox One original battery size. (charge function is not supported).  12. Two board keys using WSH136 Hall sensors.  13. Handle part: 1 > RF has a problem: the red light flashes 3 times in front, waits 2.5 S, flashes 3 times. 2 > the touchpad has a problem: the red light flashes 2 times in front, waiting for 2. 5 S, and flashing 2 times. 14. Receiver: 1 > RF problem: the red light flashes 3 times, waits 2.5 S, flashes 3 times. 四.Function and operation instructions Button function: standard Xinput Gamepad + mouse + keyboard Mute, wired mode and wireless mode.  2.Key Description     Button key  Key Value key value  Match to ControlPanel Corresponding control panel 2  D-Pad Up  XINPUT_GAMEPAD_DPAD_UP  Up 4  D-Pad Down  XINPUT_GAMEPAD_DPAD_DOWN  Down 3  D-Pad Left  XINPUT_GAMEPAD_DPAD_LEFT  Left 1  D-Pad Right  XINPUT_GAMEPAD_DPAD_RIGHT  Right 12  Start  XINPUT_GAMEPAD_START  8 10  Back  XINPUT_GAMEPAD_BACK  7 9  LS  XINPUT_GAMEPAD_LEFT_THUMB  9 13  RS  XINPUT_GAMEPAD_RIGHT_THUMB  10 17  LB  XINPUT_GAMEPAD_LEFT_SHOULDER  5 19  RB  XINPUT_GAMEPAD_RIGHT_SHOULDER  6 8  A  XINPUT_GAMEPAD_A  1 7  B  XINPUT_GAMEPAD_B  2 5  X  XINPUT_GAMEPAD_X  3 6  Y  XINPUT_GAMEPAD_Y  4 14  HOME  X Guide Button
 11  Speaker Mute  Keyboard Speaker Mute  System Speaker Mute ON/OFF 9  Left Stick  X Axis + Y Axis  X Axis + Y Axis 13  Right Stick  X Rotation + Y Rotation  X Rotation + Y Rotation 16  Left Trigger  Z Axis +  Z Axis + 18  Right Trigger  Z Axis -  Z Axis - 20  Pairing  2.4G Pairing Button     21  Touchpad Release  Hold to release Touchpad module     22  Mouse Left Button  Mouse Left Button     23  Mouse Right Button  Mouse Right Button      Home key: 1. Short press: X Guide Button. 2. Press and hold for 1 second: power on. 3. Press and hold for 3 seconds: power off. 五、button life      Button  Type Actuation force (gram-force)strength Actuation Distancedistance Life Working lifeTesting Rate(times/min)test frequency(number)minute D-Pad Up   Dome Switch  240±30  0.3±0.005mm  200k  50 D-Pad Down   Dome Switch  240±30  0.3±0.005mm  200k  50 D-Pad Left   Dome Switch  240±30  0.3±0.005mm  200k  50 D-Pad Right   Dome Switch  240±30  0.3±0.005mm  200k  50 A  Rubber  120±20  1.1±0.1mm  1000k  60 B  Rubber  120±20  1.1±0.1mm  1000k  60 X  Rubber  120±20  1.1±0.1mm  1000k  60 Y  Rubber  120±20  1.1±0.1mm  1000k  60 Back  Tact Switch  160±30  0.3±0.005mm  100k  20-30 Start  Tact Switch  160±30  0.3±0.005mm  100k  20-30 Mute  Tact Switch  160±30  0.3±0.005mm  100k  20-30 Home  Rubber  130±30  1.1±0.1mm  100k  50 LT  Hall Sensor  160±20  7.5±0.3mm  1000k  60 LB  Tact Switch  180±20  0.3±0.005mm  100k  20-30 RT  Hall Sensor  160±20  7.5±0.3mm  1000k  60 RB  Tact Switch  180±20  0.3±0.1mm  100k  20-30 Mouse Left   Tact Switch  160±15  0.3±0.005mm  100k  20-30 Mouse Right   Tact Switch  160±15  0.3±0.005mm  100k  20-30
  六、Electrical specification 1. Working voltage: 1> Wired mode operating voltage: 5.25-4.75V, regulated to 3.3V. 2> Wireless mode operating voltage: 2.2-3.2V, boosted to 3.3V. 3> Low-voltage alarm: 2.2 (low-power HOME white light flashes).  2. Working current: 1> Wired mode: When the motor is not vibrating, the current is ≤85MA. When the motor is vibrating, it is ≤100MA and the vibration is ≤140MA. 2>Wireless mode: current ≤65MA when the motor is not vibrating ≤115MA when the motor is vibrating ≤90MA vibration ≤150MA 3> Sleep current 0uA.  3. Connect PC: 1> Wired mode: Xinput mode for Gamepad, Touchpad, Mouse, HID Speaker Mute. 1 PCs can support up to 4 handle devices at the same time, and the color of xinput 1, 2, 3, 4 channels is green red, blue and yellow. 2> Wireless mode: Xinput mode for Gamepad, Touchpad, Mouse, HID Speaker Mute. (1)PCs can support up to 4 handsets simultaneously. The color of the xinput 1,2,3,4 channel is green red, blue and yellow. The color of the handle and the dongle are synchronized. When the handle is turned on, the USB Dongle is automatically connected before the handle is turned on. The RGB LED on the handle and the Dongle display the same color (RGB LED color reference LED) chapter) (2) modulation mode: GFSK. (3)anti-interference mode: frequency hopping. (4) working distance: 8 meters turned. 3>Wireless and wireless work sequence: If you access the PC USB port in 2.4G working mode, the cable mode will be entered first.  4. Touchpad: 1>Removable, press the top release button to slide up and remove, the touchpad module uses a 5pin connector to connect the handle PCB. 2> Touchpad movement: The mouse cursor moves. 3> Touchpad click: left mouse button. 4> Touchpad double click: right mouse button. 5> Other reference standards Win10 multi-finger control specification.
  5.LED:      1> RGB LED x 1 corresponds to 4 channels of color: 1, 2, 3, 4 channels are green, red, blue and yellow.  2>Front HOME button under white LED x 1    3>Receiver indicator: RGB LED x 1 corresponds to 4 channel colors: 1, 2, 3, 4 channel color is green red blue yellow.    6.sleep mode: 1> No operation for 5 minutes, the handle goes into sleep mode, press the Home button to wake up.  七.rocker and board calibration 1. Press and hold A+B to power up. 2. Press the HOME button to turn it on, and the three-color LED flashes white to enter the calibratio3. Shake the left and right joysticks and press the left and right board keys to maximize the stroke 4. After calibration, press X+Y to exit.  八、attention:  1. It is strictly forbidden to disassemble this product.
 2. It is strictly forbidden to beat the property with great force. 3. It is strictly forbidden to expose the product to high temperature or sun exposure for a long time. 4. Do not plug the handle USB cable into a non-5V power supply.  FCC Warning   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.    NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.    NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu