Stihl Fs 40 C E Selection And Identification Chart STL_Cat2015_Full__charts

: Stihl Stihl-Fs-40-C-E-Selection-And-Identification-Chart-685210 stihl-fs-40-c-e-selection-and-identification-chart-685210 stihl pdf

Open the PDF directly: View PDF .
Page Count: 2

10 stihlusa.com

Cutting Head Part Numbers

FS 38

FS 40 C-E

Trimmer Line Diameters FS 45*

FSA 65 FS 46* FS 55

Head/Blade Type Part Number Standard Optional FSE 60 FSA 85 FSA 90 R FS 50 C-E

FS 56 C-E**

STIHL SuperCutTM 20-2 4002 710 2184 .095” — v v

STIHL SuperCutTM 40-2 4003 710 2142 .095” —

AUTOCUT® C 4-2 4006 710 2123 .080” — v

AUTOCUT® 5-2 4006 710 2103 .080” — v v

AUTOCUT® C 5-2 4006 710 2106 .080” — v v

AUTOCUT® C 25-2 4002 710 2196 .095” — v

AUTOCUT® 11-2 4004 710 2192 .095” .080”

AUTOCUT® 25-2 4002 710 2191 .095” .105” v v

AUTOCUT® 30-2 4002 710 2187 .095” .105”

AUTOCUT® 40-2 4003 710 2189 .095” .105”

AUTOCUT® 40-4 4005 710 2102 .095” .105”

FixCutTM 5-2 4006 710 2118 .095” .080” v

FixCutTM 25-2 4002 710 2158 .095”

.080/.120/.130”

v v

FixCutTM 30-2 4001 710 2103 —

.080/.095/.105”

v v

DuroCut 5-2 4006 710 2125 .080” .065”/.095” v

DuroCut 20-2 4002 710 2167 .120”

.080/.095/.105”

v

DuroCut 40-4 4005 710 2106 .155”

.120/.130”

TrimCutTM 31-2 4002 710 2156 .105” .095” v

TrimCutTM 41-2 4003 710 2108 .105” .095”

TrimCutTM 51-2 4005 710 2104 .105” .095”

STIHL PolyCutTM 5-3 4004 710 2180

STIHL PolyCutTM 6-3 4006 710 2104 v

STIHL PolyCutTM 20-3 4002 710 2189 v

STIHL PolyCutTM 41-3 4003 710 2114

Grass-4 25.4 mm 4001 713 3801 v**

Grass-4 20 mm 4000 713 3801

Grass-8 25.4 mm 4001 713 3803 v**

Grass-8 20 mm 4000 713 3802

Brush Knife 25.4 mm 4112 713 4100

Brush Knife 20 mm 4119 713 4100

Brush Knife 20 mm 4110 713 4100

Scratcher 25.4 mm 4112 713 4201

Scratcher 20 mm 4000 713 4200

Scratcher 20 mm 4000 713 4205

Scratcher 20 mm 4104 713 4200

Chisel 25.4 mm 4112 713 4203

Chisel 20 mm 4119 713 4200

Chisel 20 mm 4110 713 4204

STIHL SuperCutTM head:

Fully automatic, double nylon line is auto-

matically kept at the proper cutting length.

AUTOCUT® head:

Double line for trimming and

mowing. Nylon line is fed

automatically by TapAction™.

AUTOCUT® C 5-2

EasySpool™ version available.

DuroCut head:

Ideal trimmer head for users who prefer

manual heads that require precut lengths

of nylon line, even when operating in

severe applications.

TrimCutTM head:

Manual-feed nylon head is

particularly suitable for mowing

low-growing grass around

solid obstacles.

STIHL PolyCutTM head:

A universal cutting tool for

trimming large areas. Fitted with

three thermo plastic blades.

Metal blade:

Steel, four cutting edges, for working on

large areas of tough weeds and heavy grass.

Metal blade:

Steel, 8 teeth, for cutting thick,

dry weeds and reeds.

Brush knife:

Steel, for thinning and clearing

tough, tangled weeds, undergrowth

and scrub.

Circular saw blade,

scratcher tooth:

Steel, for gnarled bushes and

thin tree trunks.

Circular saw blade,

chisel tooth:

Steel, for gnarled bushes and thin

tree trunks (depends on diameter

of trunk and techniques used).

HEAVY GRASS/MOWINGBRUSH

FORESTRY

FixCutTM head:

Lightweight and quick loading. Insert

8” piece of trimmer line in each eyelet.

LIGHT GRASS TRIMMERS

11

stihlusa.com

Cutting Head Part Numbers

v Approved for use with designated

unit as originally equipped.

** When using Grass-4 and

Grass-8 metal cutting blades

with FS 56 C-E, trimmer must be

equipped with deflector. Not

necessary for FS 55. See dealer

for more details.

m Approved for use with loop handle

(R) only if equipped with barrier

bar deflector kit and a single or

double shoulder harness.

l Approved for use with bike

handle, double harness and

limit stop.

*** Not for use on FS 560 C-EM

1 Not for use on FS 240 or FS 240 R

2 Not for use on FS 94 R

* Trimmers equipped with loop

handles. For models that are/were

available with optional handles,

“R” denotes loop handle version.

Note: Numbers with “mm”

show arbor size.

Consult your instruction manual

or your authorized STIHL Dealer

for approved cutting head/deflector

combinations.

NOTE: Barrier bar and large

deflector must be attached

when using a metal blade

with loop (R) handle trimmer.

IMPORTANT

INFORMATION

WARNING: Improper use of

any brushcutter trimmer can

cause serious or fatal injury.

Read, understand and follow

all safety instructions in your

instruction manual. To reduce

the risk of injury from blade

contact, circular saw blades

may be used on FS brush-

cutters that have a bicycle

handle and double shoulder

harness and not on FS brush-

cutters with a “J” handle or

loop handle (R). Other rigid

blades may be used on FS

brushcutters having a bicycle

handle, a “J” handle, or a

loop handle equipped with a

barrier bar. To reduce the risk

of eye injury, always wear

proper eye protection. Always

use the appropriate deflector

for the type of cutting attach-

ment, as explained in your

instruction manual.

FS 55 R FSB-KM FS-KM

FS 55 RC-E FS 80 R with FS-KM with

FS 56 RC-E FS 90 R FS 90 FS 560 KM 55 R, with KM 90 R,

FS 70 R, FS 90 R, FS 110 R

FS 100 RX

FS 110 FS 240 FS 240 R FS 310

FS 360 C-E

C-EM

56 RC-E,

KM 55 R, 94 R, 110 R,

FS 94 R FS 80 FS 130 R

FS 110 RX

FS 130 FS 250 FS 250 R FS 350

FS 460 C-EM

FS 450 K FS 550

90 R, 110 R

KM 56 R 130 R

v v v v v v v v v

v v v

v2 v v v v v v

v

v v v v v v v v v

v v

v v v

v v

v v v v v v v v v

v v v v v1 v

1 v v

v v v v v v v v v

v v v v

v

2 v v v v v v v v

v v v

v

v

v v v v v v v v v

v

v v v

m v m v v m m m

v v v

m v m v v m m m

v v v v

v m v v m m

v v v

v

l l l

l l l

l l l

l

l l l

l l l

l l l

***