Stormblue A9PLUS BLUETOOTH MULTIMEDIA PLAYER User Manual A9PLUS

Stormblue Co., Ltd. BLUETOOTH MULTIMEDIA PLAYER A9PLUS

users manual

STORMBLUE CO., LTD.Rm 1308, World Meridian Venture Center, 60-24, Gasan-dong, Guemchon-Cu, Seoul, 153-801, KoreaTel. 82-2-2113-8745         Fax. 82-2-2113-8723A9+User Manualwww.stormblue.co.kr[VER-2.0]
Safety instructions 03  STORMBLUEA9+Safety instructions STORMBLUE 02A9+ Cautions!Do not shake or apply heavy shocks on the product.It might be the cause of malfunction or damaged.Avoid contacting the product with water.This may cause serious damage to the product. If the player gets wet, wipe with a soft towel or rag as soon as possible.When using your headphones/earphones.Do not wear earphones while driving an automobile, bicycle, or motorcycle. Not only it is dangerous but also it is illegal in some jurisdictions.Listening to the music by earphones at large volume level for extended periods of time may result in damaging your ears. You must not newly make any file to CONFIG folder of the player.To maintain good performanceAvoid high or low temperatureand  moisture.Do not have otherdifferent things in theproduct.Avoid placing theproduct under highmoisture or dust levelAvoid direct sunlight,high temperature fromheating device.Do not drop and impactthe product.Do not use thinner,alcohol, or benzenewhen cleaning theproductDo not place anymagnetic device nearthe product.Never disassemble,repair or rebuild
Appearance of player05  STORMBLUEA9+Appearance of playerSTORMBLUE 04A9+ Accessories Description of each part of the playerResetMode/EQ LEDUpMenu/NavigationForward SD card slotDownMicrophoneRewindUSB Conector Hold keyPower/PlayREC/A-BLine-inEarphonesInstallation CD, User manual EarphonesBluetooth stereo headset USB Adaptor Arm BandAccessories could be changed without notice in advance to increase the performance or quality of the product.Neck strap Encoding cable, USB extension cable Carrying caseUSB GenderOptional
Preparation to use the player07  STORMBLUEA9+Preparation to use the playerSTORMBLUE 06A9+ Connecting MP3 player to your PC1. You can connect the player to your PC by included USB cable. Pick up the included USB extention cable andconnect it to the USB port of your PC.2. Plug USB extension cable in the USB port of MP3 player and Plug the other side of the USB Minijack in the FemaleUSB port of the extension cable. 3. Turn on the player by push and hold the power button. Then, a removable disk will appear in your PC when you openwindows explorer.4. Earphone should not be inserted into the Player when the player is connected to PCFile upload/DownloadThe player should be turned on in advance before you plug it in the USB porta. Open Windows Explorer and select the removable disk newly created.b. You can just copy/move files from your PC to the removable disk.c. You can create many folders in the removable disk to sort out music files. d. Just copy or move any files including music files from your PC to a certain folder in your removable disk.You must not newly make any files to the CONFIG folder of the removable disk. e. You can delete/rename any files stored in the removable disk in the same way as you do in the PC. Disconnecting the player from your PCa. Before unplugging the player from the PC, make sure to double click the Green Arrow icon on the task bar on the rightbottom of the PC screen.b. When the dialogue box is displayed on the monitor, Click the stop button to stop USB Mass Storage Device.  c. When a new dialogue box appears, click “OK ” to clearly remove the removable disk from your PC.d. If you use Windows 98 or 98SE, first open windows explorer. Click the removable disk by right button of the mouseand pop-up menu will appear. Then, you can proceed to disconnect the player accordingly.CautionFor users whose OS version is Windows 98 or Windows 98SEThe Driver for Window 98 and 98SE must be installed in your PC before you connect this player to your PC if youuse Windows 98 or 98SE OS. Do not install the driver if your OS is Windows ME/2000/XP.- Insert the provided program CD to the CD Rom drive in your PC.- Enter Win98 driver folder and Run the Driver for Win98/SE OS.- You can visit our website www.stormblue.biz to download the driver for Windows 98/SECautionFatal error may occur in the PC or the player if you remove the player without completing above procedures.
Operation of the Player09  STORMBLUEA9+Preparation to use the playerSTORMBLUE 08A9+ Format the playerOperation in Playback modeClick and hold Mode button and move to Audio play mode by  or  button. Then, click Menu button to select the mode.To enter the Mode menu, click and hold the mode Mode button. To select the Mode and get out of the Mode menu, clickMenu button.To play music files, select Audio play mode. To play video files, select moive play mode. In the same way, photo viewmode is for image file like JPG and TEXT view mode is for playing TEXT file.Just click Menu button to enter navigation mode. In navigation mode, you can display any file such as music file, videofile, text and image file by click  or PLAY button when the cursor is over the file you want to play. Copy or move files from your PC to proper folder of the player. Video files to movie folder, TXT files to document folderand image files to photo folder.a. Open Windows Explorer and click the removable disk by the right button of the mouse. b. Click the format menu by the left button of the mouse.Charging the playerJust connect the player to the USB port when your PC is turned on. Then the charging lamp will be turned on. You don’tneed to turn on the player before connecting to the USB port if you only want to charge the player. When fully charged, thecharging LED will be turned off.When the player is turned off. : The player is fully charged within 1.5 ~ 2 hours.When the player is turned on. : The player is fully charged within 4 to 5 hours. CautionFormat function will delete all files in the player. Backup all the important data before formatting the removable disk.ButtonPLAYFF REW Clicklongshortlylong PlaybackPlayback / PausingNavigation modePlaybackPlayback / PausingNavigation modePlaybackPower onPower OFF Turn onTurn offPlayback of music and movie files.PauseFoward fastPlayback of the Next fileGo to the subfolderRewind fastPlayback of the previous fileGo to the Previous foldershortlyshortlylongshortlyshortlyPresent Status Operation when clicked
Operation of the Player 11  STORMBLUEA9+Operation of the Player STORMBLUE 10A9+ Operation in Playback modeButtonREC/A BMenu/NaviHoldClickshortlylongshortly PlaybackPlayback/PausingHold OffNavigation modeA  B repeatPlaybackPlayback Start A-B repeat function marking A pointStart A-B repeat function marking B pointFinish A-B repeat File Copy, Delete, CancelEnter Navagation modeEnter menuDeactivate all buttonHold On Activate all buttonlongpushPresent Status Operation when clickedPower On / Power Off- Push and hold the Power/Play button to turn on the player. - Do the same to turn off the player Playback / Pause - When powered on, just click Power/Play button- You can replay music file by click  button when the cursor is over the very file in Navigation mode - In this same way, you can also run text files and JPG image files. - If you power off the player during playback of the music file and turn it on again, just click the Power/Play button. Then, it resumes the music file from the last point of playback.Photo & Text file display- Image display function only support JPG file. Just copy jpg files from your PC to the player.  - Text display function only support TXT file. Just copy TXT files from your PC to the player.- To display TXT files and JPG files, click Play button in navigation mode when the cursor is placed over the file to display.- To see the TXT file writen in local languages, you first have to set up the language option at your language.+(Up)- (Down)MODE/EQPlaybackNavigation modePlaybackNavigation modePlaybackPower onVolume upFile serachVolume downFile serachSwitching EQ (Flat-POP-Rock-Live-Classic-Vocal-Dbass-User EQ)Enter Mode menulong/shortshortlylong/shortshortlyshortlylong
Operation of the Player 13  STORMBLUEA9+Operation of the Player STORMBLUE 12A9+ FF and REW ( and  ) During playback of music and movie files  - Push and hold  button, then it will forward the current file fast.- Click  button, then it will replay or move to the next file. - Push and hold  button, then it will rewind the current file fast.- Click  button, then it will replay or move to the previous file.[ When running a JPG image or TXT file ]- Click  button, then it will run the next file. - Click  button, then it will run the previous file.Volume control and File Navigation- Click  or  button to increase or decrease the volume level.- Click  or  button to move up and down cruising on the file in the Navigation mode.A-B Repeat- When replaying music file, click REC/A B button to mark the start point of the repeat - Then, click the same button in a few moment to mark the ending point of the repeat. Then, the repeat will start.- To finish A-B repeat, just click the same button again.Hold - Push this button in the direction of the arrow. It disables all the button to avoid unintentional operationChanging EQ During playback, just click MODE/EQ button and EQ will be switched sequentially. Flat  POP  ROCK  Live  Class  Vocal  DBass  USERReset- When your player suddenly get halted for some reason, push the reset button with a sharply-ended instrument like pin orclip and It will reset the player by force. Then, turn on your player.- Reset is different from Format and all data is safe after resetOperation in Radio mode- Click and hold Mode button and move to FM radio mode by  or  button. Then, click Menu button to selectthe mode.ButtonPLAYClickshortREC PauseRecordingMute ONMute OFF Mute ONMute OFFPausing the current recordingRestart the paused recordingPresent status Operation when clicked
Operation of the Player 15  STORMBLUEA9+Operation of the Player STORMBLUE 14A9+ ButtonREW REC/A BMenu/NaviClickLongShortPresetScan-SaveREC/ReadyScanAuto ScanScan-SaveScan Move to the next station decreasing FrequencyDecrease the register address to save current satationStop searching for other station Decrease the frequency by 1stepMove to next station saved Decrease the register address to save current stationStart recording REC Finish recording Preset Auto Memory Scan start and up to 20 stations can be registered. ScanScan savingScanPresetTurn to the Save mode to save the selected stationSave the selected station Turn to Preset modeTurn to Scan modeLongshortShortPresent status Operation when clicked Scan mode and save the each station manuallyThe default of FM radio is set in Scan mode.- Click and hold  or  button to move to next station. - To save the current station, click REC/A-B button and the register address for the station will appear- The address can be changed up and down by click  or  button. - After you adjust the address, click REC/A-B button again to save the station.Preset mode and save all station automatically - You can switch to Preset mode after you save at least one radio station in Scan mode. - Click Navi/Menu button to switch to Preset mode.- Click REC/A-B button to automatically search for all available station and it will be saved automatically up to 20 stations. - Click  or  button to move to next station.Mute - To mute FM radio, click Play button. To resume FM radio, click the same button again.FM recording- Listening FM radio, click hold on REC/A-B button to record the current broadcast.- To finish the recording, just click the same button.- To pause and resume the recording, click the PLAY button.- Recorded file is found in FMREC folder in Navigation mode.FF Long ScanSaveAuto ScanMove to the next station increasing FrequencyIncrease the register address to save current satationStop searching for other stationScan Increase the frequency by 1step Preset Move to next station savedSave Increase the register address to save current stationShort
Operation of the Player 17  STORMBLUEA9+Operation of the Player STORMBLUE 16A9+ Operation in Line-in RecordingClick and hold Mode button and move to Line in REC mode by  or  button. Then, click Menu button to select themode.Dubbing CD track to MP3 player- Connect your MP3 player and other sound resources like CD player with included encoding cable.- Press and hold EQ/Mode- Click play button of the CD player and REC button of MP3 player simultaneously.- To finish dubbing, click REC button of MP3 player again.- To pause and resume the recording, click PLAY button sequentially.Use CD sync function- With CD sync function turned on in setup menu, you can dub all track of CD into each WMA file at once. - When you dub your Cassette tape to MP3 player, make sure to deactivate CD sync option.Operation in Voice RecordingClick and hold Mode button and move to Voice REC mode by  or  button. Then, click Menu button to select the mode.- Click REC button to start recording. To finish recording click the same button again.- To pause and resume the recording, click PLAY button sequentially.- Recorded file is found in Voice folder in Navigation mode.Navigation modeTo enter navigation mode, just click the menu buttonFile copy between SD card and the player / Delete fileA9+support external SD card. - Put SD card into the SD card slot and ‘external’ folder will be created- Click Menu button to enter navigation mode. - Enter a certain folder and move the cursor on the file you want to copy Click and hold REC button- When the dialog box appears, you can choose file copy or delete function using REW( ) buttton or FF ( ) button- To select and run copy or delete function, Click Menu button.- Files are copied to ‘copied folder’ Find the ‘copied’ folder in Navigation modeButtonMenuREW ( )FF ( )RECClickShortLongShortShortShortShortLongRun the file selectedMove to setup modeMove to the upper folderMove to the sub folderMoving cursor Cancel and returnCopy file, delete fileOperation when clicked
Setup Menu19  STORMBLUEA9+Setup MenuSTORMBLUE 18A9+ Display Setup The function of Button in this Setupand  : up and down of the cursorMenu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stage button : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.This chapter is to set up all option of the player. Click and hold Menu button to enter Setup menu.Move to each Setup by or  button and click Menu button to enter the selected setup menu.To enter submenu, click Menu buttonTo select options in submenu and go back to the previous menu at once, also click Menu buttonTo go back to the initial stage of Setup menu, click  button. To completely get out of the Setup menu, Click and hold the Menu button.InformationFile name : display the file name of the song going on.ID3 tag : display the ID3 tag of the song going on Lyric : display the lyric of the song going on manually orautomaticallyLanguage selectSelect language at your preferenceCurrent TimeAdjust the current timeBacklight TimeAdjust the time during which the backlight is on if there is no clickon any button.Time SetupThe function of Button in this Setupand  : up and down of the cursor / Adjust the figure (number) / Switch AM and PMMenu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stageand  : Move to the next columnbutton : Go back to the initial stage / After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.Mode button : Switch On and Off
Setup Menu21  STORMBLUEA9+Setup MenuSTORMBLUE 20A9+ FM REC TimeAdjust the time for automatic recording of the designated station.You have to adjust starting time and finishing time as well as aday of the week and the radio station.Time SetupFolder modeFolder1 : replay the songs in the current folder Folder all : replay songs in all folder in the playerRepeat modeNormal : no repeatRepeat 1 : repeat the current songs going on Repeat all : repeat all songs in the current directory or all directoryRandom : replay all songs in the current directory or all directory atrandomIntro : replay only the introductory part of the songs for overview.Play SetupThe function of Button in this Setupand  : up and down of the cursorMenu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stageand  : Increase or decrease the percentage in play speed setup / Move to the next column in search speed setup/button : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.Sleep TimeAdjust the time after which the player is turned off. Alarm TimeAdjust the time on which you want to wake up or get noticedOff TimeAdjust the time after which the player is turned off if there is noclick on any button.This setup doesn’t work if there is any file going on or the player isin FM mode.
Setup Menu23  STORMBLUEA9+Setup MenuSTORMBLUE 22A9+ Line in REC Volume SetupAdjust the volume of the recording by  and  buttonPlay SetupSound Setup The function of Button in this Setupand  : Up and down of the cursor / Adjust the EQ level in User EQ / Switch WOW and Trubass in SRS setup /Menu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stageand  : Move to next EQ column in User EQ / Adjust the level of SRS and Trubass in SRS setupbutton : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.EQ modeSelect EQ at your preference.Recording SetupThe function of Button in this Setupand  : up and down of the cursor Menu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stageand  : Increase or decrease the recording levelbutton : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.Mode button : Switch On and Off in audio REC setup.Voice REC SetupAdjust quality of the recording by  and  buttonSearch speedAdjust the search speed for forwarding fast and rewinding ofsongs.Audio REC setupAdjust quality of the recording by  and  button. Switch onand off for CD sync function. CD sync is a function to dub all track inCD into respective WMA file. Audio Recording SetupPlay speedAdjust the playback speed by percentage. The default is at 100%
25 STORMBLUEA9+Setup Menu Setup MenuSTORMBLUE 24A9+ Sound Setup  FM radio SetupFM radio Setup The function of Button in this Setupand  : Up and down of the cursor Menu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stagebutton : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.FM area Select the correct area for FM broadcast for your nation.Stereo modeSwitch mono and stereo. User EQMake your own EQ setupControl SetupThe function of Button in this Setupand  : Up and down of the cursor Menu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stagebutton : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completelyget out of the Setup menu.Format This menu will format your player and all files will be deleted.Memory informationShow the current status of memory use.
27  STORMBLUEA9+Setup MenuSTORMBLUE 26A9+ Firmware upgradeSee the firmware upgrade part Load defaultThis will change all setup to the status of factory setup.This function doesn’t delete any file.Control SetupSetup Menu
29  STORMBLUEA9+STORMBLUE 28A9+ Transcoding video filesManual for Transcoder program Manual for Transcoder program1. Click the icon of “Transcoder” and see the  main picture as below.2. Press the “Add File” buttonand open the file is availableto be converted. Or drag anddrop the Movie file to the filelist.3. To change the Folder be saved thetranscoded file, press the “Select” buttonand point the location.If you specify the “File name header”, be  added when the transcoded file will be saved automatically. Manual for Transcoder programTranscoder program is to compress certain movie files such as AVI, MPG, WMV, ASF as well into a special format forthis player so as to replay those video files in this player. Install transcoder program1. Put included program CD in the CD Rom Drive of your PC2. Enter the ‘transcoder Folder’3. Install the program by double-click on the setup filePC System Requirements- PENTIUM 3 / WINDOWS 98/ME plus- DIRECTX 9.0 / WMV 9.0 plus must be installed in your PC- Integrated Codec must be installed in your PC.Available Format- RAW, AVI, MICROSOFT WMV, DAT, MPG, ASF...- Some files in above format may not be compressed by Transcoder program. Necessary Codec to be installed (3 codecs mentioned below must be installed)Direct X : install 9.0 version or later version. Visit www.microsoft.com/windows/directx/default.sapx and enter download center menuDownload Direct X and install it.- WMV9 : Visit above site and enter download center menu. Download and install windows media player version 9.0 or later version. (No need to install if your current version of windows media player is later than 9.0 version)- Integrated codec : Visit www.free-codecs.com and download a latest version of ‘K-lite codec pack’ and install it.
31  STORMBLUEA9+Manual for Transcoder programSetup Transcoder programClick ‘Setup’ buttonVideoAdjust the size and image quality of Transcoding video files. The maximum size is 220 176.AudioAdjust the sound quality of Transcoding files.PathDesignate the folder in which to save the transcoding files.STORMBLUE 30A9+ Manual for Transcoder program4. Press the “Settings” button and adjustthe setting in connection with Video/Audio/Caption.More details, see the instruction beside  of setting menu. 5. Press the “Start” button and be startedthe progress of transcoding. (To beshowed the progress of states fortranscoding as blue bar)6. If show the “Processing completed100%”, were able to play the file betranscoded by A9+normally.Be saved the transcoded file as XXX.AVI.If copy the transcoded file to the Movie folder or Root, be able to play the file same as music one.
33  STORMBLUEA9+Using Bluetooth functionSTORMBLUE 32A9+ Using Bluetooth functionSelect ‘search device’ menu to automatically find and register the bluetooth headphones or speaker.If there are any bluetooth equipments already registered, use ‘connect device menu’ to connect themquickly.Password must be input to register any bluetooth product. There is the password of the connecting device in itsmanual. Use  or  button,  or  button to choose numbers and click Menu button to input the number.After finishing to input password, move the cursor to ‘OK’ button and click Menu button to complete this process.When connected or failed to connected, it display the message.Bluetooth is optional function and this section is only for A9+Bluetooth modelUsing Bluetooth functionThe function of Button in this Setupand  : up and down of the cursorMenu button : Enter the submenu / Select (finish) the option in submenu and go back to the previous stagebutton : Go back to the initial stage. After getting back to the initial stage, click and hold Menu button to completely get out of the Setup menu.[The first stage to connect Bluetooth equipment]Move to the Bluetooth setup menuClick Menu button to enter submentPlace the cursor at ON and click Menu button again to initialize the Bluetooth. To connect the Bluetooth headphones or speakers, they must be turned on and ready to be connected.
35  STORMBLUEA9+STORMBLUE 34A9+ Firmware upgradeUsing Bluetooth functionFirmware upgrade1) Please, keep up with new firmware released on our website at www.stormblue.biz2) Download a updated firmware file from the STORMBLUE website and unzip the file if the file format is zip file.3) Turn on the player and connect it to the USB port of your computer and then a removable disk will appear. Copy thefirmware file to Config folder of the player4) Safely remove the removable disk and pull the player off the USB port. (When disconnected, the player will beautomatically turned off). 5) Power on the player and click and hold the ‘Menu’ button to enter menu mode.6) Enter control menu and enter F/W upgrade menu by clicking Menu button. Click ‘yes’ by Menu button and then itupgrade F/W by itself. Caution!Check the current firmware version of your player. Firmware upgrade will be implemented only for higher versionof firmware.When you make a firmware upgrade, make sure the battery has been charged enough.(The remaining battery must be over one-third of battery full)1. There could be radio(electric wave) interference between bluetooth equipment and other device such asindustrial equipments, medical equipments and microwave ovens which use similar range of frequency. Itcan not be avoided technically.2. Stand at least 5m away from wireless LAN area to use bluetooth without radio interference3. The available range of bluetooth is basically 10m and it will be disconnected if it gets away more distantly.The range can be changed depending on the circumstance of the place. Some high obstacles likepartitions, corner of the wall affects the radio acceptance causing noise to the wireless sound transmission. 4. Touch on the antenna part of bluetooth can cause some noise and malfunction. 5. When registering bluetooth equipment to the player, do not place them far.[Bluetooth instructions]
37  STORMBLUEA9+STORMBLUE 36A9+ Specifications SpecificationsSupport OSAudioEQCopyright ProtectionFM RadioAudio post processingFirmware UpgradeMusic ManagementDimensionLyric SupportITEMPC InterfaceContentsUSB 2.0 : Mass Storage ClassSpeed : Up Load 5 Mbps / Down Load 4MbpsWindows98 / 98SE / ME / 2000 / XP / 2003 Headphone Out, Line-In, Bluetooth TX (Option)POP, Rock, Classic, Vocal, Live, D-bass, Flat, 5 Band User EQWMA Portable Device DRM (WMA PD DRM), MarkAny DRM (XSync)FM Tuner (20Preset) / World wide channel supportEqualizer (Normal, Pop, Rock, Live, Classic, Vocal, Dbass, User)Firmware UpgradeablePlay List( M3U )84 43 19mm (70g)Automatic & Manual (Media Sync)Specifications about MP3 partAudio EncodingRecording timeDisplaySoundBatteryFile SystemCapacityExtendable slotPlayback TimeITEMAudio FormatImageVideo FormatContentsMPEG1,2,2.5 Layer3(8~320Kbps, VBR), WMA Version 9 (32 ~ 320Kbps)Ogg Vorbis (Q1 - Q10)ID3 Tag Ver1.0/ 1.1/ 2.0 SupportWMA (32Kbps - 128Kbps)Max 35 hours with 512MBSupport MPEG4 Simple Profile.Support AVI file format with .mp4 extension.Support 220 176, 20 frames.Support Windows Tool program, which is released transdcoder.Text ViewJPEG (ISO/ IEC 10918-1, Annex F - Sequential DCT-based mode of operation.)2.0” TFT LCD (220 176)23mW 23mW sound output / S/ N ratio : 90dB1050mA Li-poly battery (charging time : 140 minutes)FAT12, FAT16, FAT321GB ~4GBFor SD cardMP3 Play time : 39 hours, LCD off (11 hours with movie files)
39  STORMBLUEA9+STORMBLUE 38A9+ Specifications Bluetooth Trouble ShootingWhen you connects the player and a Bluetooth headphone, please refer to manuals of the player and theheadphone. But, if you encounter problems while your using the player, this section will help guide you onhow to solve them.1. Before you use the player Bluetooth, you must set Bluetooth mode to “On” in Bluetooth Menu.- Also a Bluetooth headphone to use must be turned on.2. The player can’t search a Bluetooth stereo headphone to use- Ensure that the headphone is stereo type. the player support only stereo type, not mono type.- Check if the has been set to discoverable mode or pairable mode. the player searches headphones only in these modes.3. The player fails to register a Bluetooth stereo headphone- Check if the headphone has been set to pairable mode. the player registers headphones only in this mode.- Ensure that PIN code is right. PIN code must be the same as the headphone’s.4. The player can’t connect to a Bluetooth stereo headphone- Ensure that the player registered the headphone. Before connection, the player must register the headphone.- If the player and the headphone are paired already, re-register the headphone. Registered information can be deletedin two devices.- Check the battery status. If the battery is too low, the player can’t connect to the headphone normally.Specifications about Bluetooth partITEMBluetooth versionRadio frequency rangeRadio powerRadio power classRX sensitivityRadio RangeSecurityProfileContentsVersion 2.0 Specification compliant2.402GHZ~2.480GHZ0.01mW (average RF on whole 79 channel)Class 2-82.0dBmup to 10mLevel 3 (Link level)A2DP (source), AVRCP (target)
41  STORMBLUEA9+STORMBLUE 40A9+ A9+Trouble shootingBluetooth Trouble Shooting1. The Player does not power on- Lock is in the HOLD position? (Release the hold)- The batteries are exhausted? (Recharge the batteries)- Click the Reset Button and initialize the player2. No sound is heard from player or distortion is heard during playback- Check whether VOLUME is set to “0”. - Make sure that there are MP3 files in the memory- Check whether plug is dirty.- Corrupted MP3 or WMA files may make a static noise and the sound may cut off. Try with other files.3. Characters on LCD are abnormal- Check the language is setting at “English” in MENU 4. FM Radio does not work- Adjust the position of the player and earphones.(The earphones works as antenna, they must plugged in for best reception) - Turn off the power of other electric devices near the player.5. Failed download - Make sure the USB Cable is connected properly.- Check the condition of the battery.6. The player works abnormally or does not play- Click the Reset button and initialize the player.5. No sound in a Bluetooth stereo headphone- Ensure that the player and the headphone are connected.- Ensure that the player plays music.- Check the volume of the headphone- Check the battery status. If the battery is too low, the player can’t transfer music to the headphone normally.6. Volume control doesn’t work when using Bluetooth headphone- You must use the volume button on the  Bluetooth headset to adjust the volume of the player- The volume key of the player is available anly when using normal earphones7. You don’t know what’s wrong- If you operate the player and a headphone as manuals but you can’t listen to no sound at the headphone and youdon’t know what’s wrong, try to do next : Turn off the headphone and on again. Also, set Bluetooth of the player to Off mode and to On mode again. And repeatas manuals.- If you repeat but you can’t listen to no sound, please contact to us, StormBlue.
WarrantySTORMBLUE 42A9+ Bluetooth MP4 Player A9+1) This product has been manufactured under strict quality and control inspections.2) If the product breaks down during normal usage, our dealer/or service center will fix the product for the period freelisted in the warranty as below.3) A service fee may apply after the warranty period or in case of the following.- If the problem was caused by the customer’s misuse.- If any internal modification was done by the customer.4) We do not reissue warranty certificate. Please store it in a safe space.ProductModel NameNameAddressTelNameAddressTelMonth Day YearCustomerPurchaserDate of PurchasePeriod of WarrantyFor more information about Customer support, please visit our web-site at www.stormblue.co.kr

Navigation menu