Strategic Vista Technologies SV-04-TX 2.4GHz Wireless Transmitter & 315MHz IR Extender User Manual

Strategic Vista Technologies Inc. 2.4GHz Wireless Transmitter & 315MHz IR Extender Users Manual

User Manual

2.4 GHZ WIRELESS VIDEO SENDER WITH IR EXTENDERFOR MORE INFORMATIONWWW.STRATEGICVISTA.COMBefore operating the system, please read this manualthoroughly and retain it for future reference.This product broadcasts over public airwaves and its video and audio signals may be intercepted without your consent.
Explanation of two SymbolsThe lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated"dangerous voltage“within  theproduct's enclosure that may be of sufficient magnitude toconstitute a  risk of electric shock to persons.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance(servicing) instructions inthe literature accompanying  the appliance.THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ONTHE  BOTTOM OF THE SYSTEM.!WARNING:  To prevent fire or shock hazard, do not expose this unit torain, water, or  wet locations.  Do not insert any metallic object through the ventilation grills.FCC InformationThis device complies with part 15 of the FCC Rules, Operation issubject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CAUTION: Changes or modifications not expressly approved by Summer infant may void the users authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:lReorient or relocate the receiving antennalIncrease the separation between the equipment and the receiverlConsult the dealer or an experienced radio / TV technician for help.CAUTIONRISK OF ELECTRIC SHOCK.  DO NOT OPEN.CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK,  DO NOT  REMOVE COVER (OR BACK).  NO USER-SERVICEABLE  PARTS INSIDE.  REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.!i
SAFETY INSTRUCTIONSIMPORTANT SAFEGUARDSAll the safety and operating instructions should be read before the system is operated, and retained for future reference.1. HEED WARNINGS -All warnings on the appliance and in the operatinginstructions should be adhered to.2. FOLLOW INSTRUCTIONS -All operating instructions should befollowed.3. WATER AND MOISTURE -Do not use this video product near water –for example, a bath tub, wash bowl, kitchen sink, laundry tub orswimming pool, or in a wet basement.4. POWER SOURCES -This product should be operated only from the typeof power source indicated on  the marking label.5. OVERLOADING -Do not overload outlets and extension cords, whichcan result in a risk of fire or  electric shock.6. SERVICING -Do not attempt to service this product yourself.  Opening orremoving covers may expose you to dangerous voltage or otherhazards.Refer all servicing or repairs to qualified service personnel.7. DAMAGE REQUIRING SERVICE -Unplug this product from the walloutlet and refer servicing or  repairs to qualified service personnel underthe following conditions:a. When the power supply cord or plug is damaged.b. If liquid has been spilled or objects have fallen into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally by following theoperatinginstructions. Adjust only those controls that are covered by theoperating instructions.e. If the product has been dropped or the cabinet has been damaged.f. When the product exhibits a distinct change in performance.8. REPLACEMENT PARTS -When replacement parts are required, besure the service technician has  used replacement parts thatarespecified by the manufacturer or have the same characteristics as theoriginal part. Unauthorized substitutions may result in fire, electricshock, or other hazards. 9. SAFETY CHECK -Upon completion of any service or repairs to thisvideo product, ask the service technician to perform safety checks todetermine if the video product is in proper operating condition.10. An appliance and cart combination should be moved with care.Do not place this equipment on an unstable cart, stand, or table.Theequipment may fall, causing serious injury to a child or adult, andserious damage to the equipment. Wall or shelf mounting shouldfollow the manufacturer's instructions and should be done with a mounting kit approved by the manufacturer.ii
TABLE OF CONTENTS PAGEiiiINTRODUCTION & FEATURES………………………………………SYSTEM INCLUDES…………………………………………………..CONTROLS AND FUNCTIONSWireless Transmitter…................….……………………..……...Wireless Receiver...……..............................……….……...……INSTALLATION OF WIRELESS TRANSMITTER………………….INSTALLATION OF WIRELESS RECEIVEROperation with TV (Using RCA Cables)......……………….….... Operation with TV (Using Coaxial Cable) ..............…..……......SYSTEM OPERATIONMultiple Devices ……………………………………………………Using the IR Extender feature with your Remote Control………How to use the IR Extender Accessory…………………………..  TROUBLE SHOOTING ..............................................………..…...TECHNICAL SPECIFICATIONS ....................................................CARE & MAINTENANCE……………………………..……………….1234567889  1011 12
INTRODUCTION:FEATURES:•Send signal to a second TV Satellite, DVD, or Security Camera•Change TV Functions from remote location using remote control extender•View video from another room•300 ft Wireless Transmission (open space)•2.4 GHz Wireless Transmission•Crystal clear Video and Stereo audio•4 Channel Wireless System 1
SYSTEM INCLUDES:1 -2.4 GHz Wireless Receiver 1 -2.4 GHz Wireless TransmitterOwner’s ManualAlso includes:2  -9V DC 500mA Adapters2 –RCA Audio/Video Cables1 –Coaxial Cable21 -Remote Control IR Extender
REAR VIEW9BOTTOM VIEWWIRELESS TRANSMITTER..Location of Transmitter controls1.  Channel Selector Button –Used to select between channels 1-42.  LED Channel Indicators –Indicator light shows selected channel3.  IR Antenna - Extends the effect range between the receiver and the transmitter for the remote control feature4.2.4 GHz Antenna –High gain dipole antenna transmits audio and videosignal to the wireless receiver 5.  DC IN Jack –Power source for the transmitter6.  Video Input Jack (Yellow) –RCA jack for video input connector7.  Audio Input Jacks L (White) & R (Red) –RCA jacks for audio inputconnector8.  IR Extender Input –Connection for the IR Extender accessory9.  ON/OFF Power Switch –Ensure this switch is set to OFF beforeplugging the system into an electrical outlet3TOP VIEW12345678CONTROLS & FUNCTIONS
WIRELESS RECEIVERREAR VIEWBOTTOM VIEW9105 6 7 8Location of Receiver controls1.  Channel Selector Button –Used to manually switch channels from 1-42.  LED Channel Indicators –Indicator light shows selected channel3.  IR Antenna - Extends the effect range between the receiver and the transmitter for the remote control feature4.2.4 GHz Antenna –High gain dipole antenna receives audio and videosignal from the wireless transmitter 5.  Video Output Jack (Yellow) –RCA jack for video output connector(when using RCA connector)6.  Audio Output Jacks L (White) & R (Red) –RCA jacks for audiooutput connector (when using RCA connector)7.  RF Out Jack (To TV) –Connect the receiver to a TV using the supplied coaxial cable. (alternative to RCA cable connection)8.  DC IN Jack –Power source for the receiver9.  ON/OFF Power Switch –Ensure this switch is set to OFF beforeplugging the system into an electrical outlet10.Channel 3/4 Selector Switch –Used to view picture on television when using coaxial cable (preset to channel 3)CONTROLS & FUNCTIONS4TOP VIEW2134
CONNECTING A TRANSMITTER SIGNAL FROM YOUR  SATELLITE/TVINSTALLATION OF TRANSMITTER1. Connect one end of the RCA cables to the Audio/Video Input jacks of the Transmitter; the other end to the Audio/Video Out jacks of the TV/Satellite/DVD. Ensure that the yellow, red and white plugs match theyellow, red and white jacks on both the TV/Satellite/DVD andtheTransmitter.  2. Plug one end of the supplied power adapter (9V 500 mAadapter) into theback of the transmitter; the other end into an electrical outlet. The system isdefaulted to channel 1.Ensure the Power Switch on the Transmitter is turned OFF prior toproceeding with the following steps.NOTERear of    Satellite/TVRCA Cable (Supplied)Back of TransmitterSTEP 1:5Electrical Outlet
CONNECTING A RECEIVER TO A REMOTE TV USING RCA CABLESINSTALLATION OF RECEIVERSTEP 2:Ensure the Power Switch on the Receiver is turned OFF before proceeding with the following steps.NOTE1. Place the wireless receiver near your television (or monitor).2. Connect one end of the RCA cables to the Audio/Video output jacks at theback of the Receiver.  Plug the other end of RCA cables intotheAudio/Video In jacks on your television.  Be sure the yellow, red and whiteplugs match the yellow, red and white jacks on both the receiver and TV.3. Connect one end of the supplied 9V 500 mAAC adapter into the DC IN   jack at the rear of the receiver; the other end into an electrical outlet.  Turn the receiver ON.  The system is defaulted to channel 1.4. Turn your T.V. to AX (Aux. Mode or TV/Video) to view the picture on yoursecond T.V. 5. Adjust the antenna on both the transmitter and receiver as necessary foroptimum viewing. For optimum viewing reception you may need to change the channels of both your transmitter and receiver to the same channels between CH 1 –CH 4  NOTEYou have two options to connect the Receiver:  A) Using RCA Cables (see below), or B) Coaxial Cables, please refer to page 7of thismanual.Back of Receiver TelevisionElectrical OutletA)6
CONNECTING A RECEIVER TO A T.V. USING COAXIAL CABLESINSTALLATION OF RECEIVERB)Back of ReceiverTelevisionElectrical OutletCoaxial Cable (75 ohm)Ensure the Power Switch on the Receiver is turned OFF prior to proceeding with the following steps.NOTE1. Place the wireless receiver near your television (or monitor).2. Connect one end of the coaxial cable to the back of the Receiver.  Plug theother end of the coaxial cable to the television.  3. Connect one end of the supplied 9V 500 mAAC adapter into the DC IN jackat the back of the receiver; the other end into an electrical outlet. Turn thereceiver ON. The system is defaulted to channel 1.4. Search channels 1 through 4 by using Channel Selector Switch on theReceiver and Transmitter. 5. Turn your T.V. to channel 3 to view the picture from your second T.V.6. Adjust the antenna on both the transmitter and receiver as necessary for optimum viewing.For optimum viewing reception you may need to change thechannels of your transmitter and receiver to the same channelsbetween CH1 –CH 4NOTEAudio  Video7
SYSTEM OPERATIONCONNECTING MORE VIDEO DEVICES TO YOUR SYSTEM (MAX. OF 4)The Video Sender system allows you to connect more than 1 transmitter and receiver. Connecting more than one transmitter to the system is normally utilized when viewing multiple Video sources on a television or monitor. You also have the option to connect multiple receivers to this system for viewing your Satellite/DVD picture from multiple rooms.When connecting additional transmitters to this system, ensure the transmitter is set to a different channel. Use the Channel Select button to navigate between different channels.  8
HOW TO USE THE IR EXTENDER ACCESSORY The IR Extender connects to the transmitter through its own special connector plug. The extender emits an IR signal to your A/V device with the remote signal. To use the IR extender, follow the instructions below;1.  Plug the IR Extender into the back of the transmitter (see page 3)2.  Orient the end of the IR Extender so that it points in the general direction of the IR sensors on the source device that you wish tocontrol 3.  Position the receiver so that your remote control signal canstrikethe IR window on the front of the unit. To use your remote control,point it at the front of the receiver.9TransmitterIR Extender InputReceiverUHFIR ExtenderSYSTEM OPERATION
TROUBLESHOOTINGIf the system does not function properly, check the following points before contacting the service center.10Causes & RemediesProblems-Adjust antenna direction-Adjust antenna directionPicture rolls and jumps or scrambled picture-Adjust brightness control on TV/monitor-Strong spot light in the field  of view-Lighting source in the field of view Picture flickeringPicture too brightor too dark-Adjust antenna direction-Improper channel 1-4selection-Video source/device notconnected to transmitter-AC adapter not plugged in-Power switch not turned ONPoor Reception-AC adapter not plugged in-Power switch not turned on-TV or Monitor not turned on-Improper A/V or coaxial cable connection-Video source/ device notconnected to transmitter-AC adapter not plugged in-Power switch not turnedONNo power(no picture/sound)Receiver/TransmitterVideo Source
TECHNICAL SPECIFICATIONSAs our products are subject to continuous improvement, SVII and its subsidiariesreserve the right to modify product  design,specifications and prices, without notice and without incurring any obligation. E&OE 11WIRELESS TRANSMITTERPower supplyCurrent consumption Channel frequencyChannel selectionModulation systemVideo channelVideo input levelAudio channelAudio input levelAntenna typeLED indicatorIR Control DistanceIR Transmission AngleDimensionsWeightAC adapter 9V DC 500mA output150 mATYP.2.411 –2.473 GHz4 channelFM modulation11 Vpp@ 75 Ohm11 Vpp@ 600 OhmDipolePower> 3 meters30 degrees5.25”(Diameter) x 1.5”(Height)136 grams or 4.8 OzWIRELESS RECEIVERReceiving frequencyOutput levelSensitivityAntennaIR Receiver DistanceIR Receiver AngleOperating temperaturePower sourceDimensionsWeight2.411GHz -2.473GHz (4CH)1.0Vp-p(Video), 3.0Vp-p(Audio)> 85 dBm Dipole antenna3 meters45 degrees-14ºto + 122ºF  or (-10ºC to + 50 ºC)9V 500mA DC Adapter5.25”(Diameter) x 1.5”(Height)181 grams or 6.4 Oz
CARE AND MAINTENANCE:Please follow these instructions to ensure proper care and maintenance of this systemKeep your monitor and camera dry. If it gets wet, wipe it dry immediately.Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices.Handle the monitor carefully. Dropping it can causeserious damage to the unit.Occasionally clean the unit with a damp cloth to keepit looking new. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the unit.Keep the unit away from excessive dirt and dust. It can cause premature wear of parts.12

Navigation menu