Stryker Medical SDMAN SDIO Wireless Module User Manual Users manual

Stryker Medical SDIO Wireless Module Users manual

Contents

Users manual

   (1/3)  CONFIDENTIAL   User’s Manual   Product:    SDIO Wireless Module Model:    SX-SDMAN  For Stryker Medical integration only – this device cannot be sold to the general public  FCC ID: Z7A-SDMAN IC: 4919E-SDMAN  The OEM must include the following notices as required by FCC/IC on the product and in the User’s Manual.
   Date: May 08, 2014  (2/3)  CONFIDENTIAL1  Notifications  FCC ID:Z7A-SDMAN  IC No.:4919E-SDMAN  NOTICE  Federal Communication Interference Statement    (United States only) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC  rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential installation.  This  equipment generates,  uses,  and  can  radiate radio  frequency  energy and, if not installed and used in accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  •  Re-orient or relocate the receiving antenna   •  Increase the separation between the equipment and receiver   •  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected   •  Consult the dealer or an experienced radio/TV technician for help  This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.  Canadian Depertment of Communications Industry Canada Notice (Canada only) This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.   FCC Rules, Part 15 / Industry Canada This  device  complies  with  Part  15  of  FCC  Rules  and  Industry  Canada  licence-exempt  RSS  standard(s). Operation  is subject to the following two conditions:  (1)  This device may not cause harmful interference, and (2)  This  device  must  accept  any  interference,  including  interference  that  may  cause  undesired  operation  of  this device.  Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :    (1)    l'appareil ne doit pas produire de brouillage, et   (2)    l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est       susceptible d'en compromettre le fonctionnement.
   Date: May 08, 2014  (3/3)  CONFIDENTIAL This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.    Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition dans le Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC.    Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.  Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.  This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance  for  each  antenna  type  indicated.  Antenna  types  not  included  in  this  list,  having  a  gain  greater  than  the maximum gain indicated for that type, are strictly prohibited for use with this device.  Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.  For product available in the USA/Canada market, only channels 1-11 can be operated. Selection of other channels is not possible. If this device is to be operated in the 5.15~5.25GHz frequency range, it is restricted to indoor environments only. Antenna: Proprietary Antenna gain information:    Embedded Antenna:    2.5dBi (2.4 GHz), 3.5dBi (5 GHz) Frequency Tolerance:+/-20ppm  WARNING: The FCC / The Industry Canada regulations provide that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  Manual and Product Labeling information For The OEM The end user  manual shall include all required regulatory information/warning  as  show in this  manual. And  when  this module is installed in the host product, it will include "Contains FCC ID: Z7A-SDMAN" and “Contains IC: 4919E-SDMAN” on the label of the host product.

Navigation menu