Suga Electronics SWP33MA0 Wifi module 802.11 b/g/n with AP (Access Point) / Router function User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2617410
Application ID	03sv7a2P8+iqaDKQIgtVhQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.74kB (934232 bits)
Date Submitted	2015-05-18 00:00:00
Date Available	2015-05-18 00:00:00
Creation Date	2015-04-29 11:19:23
Producing Software	Nitro PDF PrimoPDF
Document Lastmod	2015-04-29 11:19:23
Document Title	Microsoft Word - SWP33MA-0 User Manual 20150429.docx
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	Tony.Tsang

Suga Electronics Limited
802.11b/g/n (2T2R) WLAN AP/Router Module
User Manual
Model: SWP33MA-0
Version: 1.0
Apr 29, 2015
Contents
1. FCC & IC Statement ............................................................................................... 2
1.1. FCC Caution.................................................................................................. 2
1.2. FCC Radiation Exposure Statement ........................................................... 2
1.3. IC Warning .................................................................................................... 3
2. Hardware Installation.............................................................................................. 4
2.1. Hardware Installation Procedures .............................................................. 4
3. Software Installation ................................................................................................ 6
3.1. Booting up ...................................................................................................... 6
3.2. Operation Mode Configuration ................................................................... 7
3.3. Local Area Network (LAN) Settings ........................................................... 8
3.4. Basic Wireless Settings ................................................................................. 9
3.5. Advanced Wireless Settings ........................................................................ 10
3.6. Wireless Security / Encryption Settings .................................................... 11
3.7. Station List................................................................................................... 12
4. Device Labeling ...................................................................................................... 13
5. Disclaimer ............................................................................................................... 13
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 1
Suga Electronics Limited
1. FCC & IC Statement
1.1. FCC Caution
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
1.2. FCC Radiation Exposure Statement
IMPORTANT NOTE:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 2
Suga Electronics Limited
1.3. IC Warning
RSS (Category I Equipment):
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
IC SAR Warning
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Cet appareil est conforme aux limites d'exposition aux rayonnements définies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé à distance
minimum de 20cm entre le radiateur et votre corps.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 3
Suga Electronics Limited
2. Hardware Installation
2.1. Hardware Installation Procedures
IMPORTANT: MUST DISCONNECT POWER BEFORE INSTALLATION.
(1) Plug the module into the host mother board by the 40-pin connector J9. Press the
module gently until the connectors are mated.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 4
Suga Electronics Limited
(2) Plug antenna_0 into the RF connector port.
(3) Plug antenna_1 into the RF connector port.
(4) Plug the LAN/WAN cable in to the LAN/WAN RJ45 socket J1.
(5) Supply power to the module.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 5
Suga Electronics Limited
3. Software Installation
3.1. Booting up
Power up the module. Connect the Ethernet port to the PC. Enter http://10.10.10.254
into Browser (e.g., Internet Explorer) to open the AP/router home page. As below:
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 6
Suga Electronics Limited
3.2. Operation Mode Configuration
Select “Operation Mode” to configure the operation mode to fit your environment. In
this menu, there are four options. Please follow the description to choose the option you
needed. If you want the module to act as an AP and Client, you should select “AP Client”
mode, choose “Enable” and then “Apply”.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 7
Suga Electronics Limited
3.3. Local Area Network (LAN) Settings
Select “LAN” option to set your home page IP address, subnet mask, default gateway,
etc. The default IP is 10.10.10.254.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 8
Suga Electronics Limited
3.4. Basic Wireless Settings
You could configure the minimum number of Wireless settings for communication such
as Network Name (SSID), Network Mode (802.11b/g/n) and Channel. The Access
Point can be set simply with only the minimum setting items.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 9
Suga Electronics Limited
3.5. Advanced Wireless Settings
Use the Advanced Setup page to make advanced settings for the Wireless. Advanced
Setup includes items that are not available from the Basic Setup page such as Beacon
Interval, Control Tx Rates and Basic Data Rates.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 10
Suga Electronics Limited
3.6. Wireless Security / Encryption Settings
Setup the wireless security and encryption to prevent from unauthorized access and
monitoring.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 11
Suga Electronics Limited
3.7. Station List
You could monitor stations that are associated to this AP here.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 12
Suga Electronics Limited
4. Device Labeling
The host device containing this module must either:
(1). Make the module label visible so that the FCC/IC ID is visible in the end
construction.
(2). Label the end product with the FCC ID and IC ID of the module. For example:
“Contain FCC ID: VZFSWP33MA0” and “Contain IC: 10609A-SWP33MA0”.
5. Disclaimer
Suga Electronics Limited assumes no responsibility for errors or omissions in the
materials available on this Document.
THESE MATERIALS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED , INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
SugaE uses reasonable efforts to include accurate and up-to-date information on this
Document; it does not, however, make any representations as to its accuracy or
completeness of the information, text, graphics, links or other items contained within
these materials. Your use of this Document is at your own responsibility. SugaE, its
suppliers, and other parties involved in creating and delivering this Document’s
contents shall not be liable for any special, indirect, incidental, or consequential
damages, including without limitation, lost revenues or lost profits.
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
P. 13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 13
Producer                        : Nitro PDF PrimoPDF
Create Date                     : 2015:04:29 11:19:23-08:00
Modify Date                     : 2015:04:29 11:19:23-08:00
Title                           : Microsoft Word - SWP33MA-0 User Manual 20150429.docx
Creator                         : PrimoPDF http://www.primopdf.com
Author                          : Tony.Tsang

EXIF Metadata provided by EXIF.tools