| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 488987 |
| Application ID | ib3Tfbp7cqX8+M9exIZ7TQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.06kB (1438290 bits) |
| Date Submitted | 2004-11-17 00:00:00 |
| Date Available | 2004-11-15 00:00:00 |
| Creation Date | 2004-10-19 08:36:17 |
| Producing Software | Acrobat Distiller 6.0.1 for Macintosh |
| Document Lastmod | 2004-10-27 11:49:42 |
| Document Title | 02110 Monitor IB pg4-1 RevO.eps |
| Document Creator | Adobe Illustrator(R) X |
| Document Author: | Workstation B |
SET UP & USE (continued):
Testing the Product
You should be able to clearly hear all levels of sound coming from the Baby's Unit through the Speaker on the Parent's Unit. Test
both channels for best performance, but ensure that both Units are on the same channel. lf no sound comes from the Speaker of
the Parents Unit when you perform these tests, check to make sure all cords are fully plugged in and connected and battery is
fresh. Make sure both Units are turned on.
To Use the Parent’s Unit in Portable Mode
Installing the batterw
For use in portable mode the Parent's Unit has one 9V battery,
Tips: To conserve battery power, use AC Adapter whenever possible.
Belt Clip:
For convenience and portability, you can clip the Parent's Unit
to your belt or waistband after a battery has been installed.
PROBLEM SOLVING:
Problem
Solution
0 Make sure both Units are “ON.”
- Set volume to a higher setting.
No sound coming from speaker
Static - Make sure both Units are on the same channel (try using the other channel if necessary).
- Move the Parents Unit closer to the Baby's Unit.
- Move Parent's Unit away from other monitors, cordless phones, walkie-talkies, etc.
- Parent’s Unit and Baby's Unit too close together— move further apart.
0 Turn down the volume on either or both Units.
Squealing noise
- Make sure both Units are turned on.
- Make sure both Units are on the same channel (try uSing the other channel if necessary).
0 Ensure both Units are upright.
0 Move Parent’s Unit closer to the Baby's Unit.
0 Use fresh battery in Parent's Unit.
Weak reception or no reception
- Turn off Baby's Unit and remove battery from Parent's Unit for 5 minutes.
- Turn on Baby’s Unit and reinstall battery in Parent's Unit.
Static electriCity causes Parent's
Unit display screen to lock
lfyou experience a problem that is not noted in this manual, please do not return the product to the store. Our Customer Relations Department
may have a simple solution to your problem. Please contact us at 1—800—968—6937 or e—mail us at customerservice@summerinfantcom.
FCC Information
This device complies With part 15 of the FCC Rules. Operation is subiect to the following two conditions. (1 > This device may not cause
harmful interference, and (9) this device must accept any intenerence received, including interference that may cause undesired operation
CAUTION. Changes or modifications not expressly approved by Summer Infant, lnc could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply With the limits for a Class E digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference Will not occur in a particular installation lfthis equipment does
cause harmful interference to radio or television reception, Which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the folloWing measures.
- Reorient or relocate the receiving antenna
- lncrease the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Summer Infant, Inc
© 9004 Summer lnfant, lnc,
b Blackstone Valley Place Suite 906,
Lincoln, RI 09865 USA
wwwsumrnerinfant com
MADE IN CHINA.
Summer Infant Europe, LTD,
Summer lnfant Europe, no,
90 Sparrows l—lerne, Bushey,
Hertfordshire WD931FX UK
44 <0>90 8490 4499
Colors and styles may vary 10/04
We at Summer lnfant stand behind all of our
produce lf you are not completely satisfied or have
any questions, please contact our Customer Service
page Department at 1—800—968—6937 or e—mail us at
4 customerservice@summerinfantcom.
02110
Please read the following instructions and warnings
carefully. Keep this instruction manual for future reference.
Tools required (not included): Phillips head screwdriver.
ummer
In portable mode, parent's unit requires
one 9V battery (not included).
For Technical Support Call 1-800-268-6237 or
E-Moil at customerservice@summerinfunt.com
A WARNING:
This product contains small parts. Adult assembly required.
Exercise care when unpacking and assembling product.
INSTRUCTION MANUAL
BABY’S QUIET SOUNDS”
”HEALTHY NURSERY”
BABY MONITOR WITH NIGHTLIGHT
Research findings indicate that overheating your baby
with too much clothing or too warm of a room
temperature may increase the risk of SlDS, particularly
if the baby has a temperature. Parents are encouraged
to set the room temperature to whatever they find
comfortable and layer the baby's clothing/sleepwear
to keep the baby at a comfortable temperature
without the use of loose blankets in the crib.
This 900 Mhz audio and health monitor lets parents monitor their baby‘s sounds and room environment for other parts of the
home. The parents unit features an LCD display that shows temperature and humidity in the baby‘s room. lt also has a timer for
feeding and medication schedules, plus a rechargeable battery, The baby‘s unit includes a convenient nightlight for checking
baby in a darkened room,
The “Healthy Nursery” Baby Monitor from Summer lnfant is the only baby monitor on the market that not only lets parents have
peace—of—mind while listening in on their little one, but also keeps a consistent check on their baby's room temperature and
humidity. Research has shown, and First Candle/SIDS Alliance and its Back To Sleep campaign partners all Cite overheating as a
risk factor for SIDS, While 5le is not preventable, you can reduce the risk. Be sure to follow First Candle/SIDS Alliance's nine risk
reduction recommendations provided on the side of this ”Healthy Nursery” Baby Monitor package.
A percentage of this purchase Will be donated to First Candle/SIDS Alliance to help babies surVive and thrive.
First Candle/SIDS Alliance Risk Reduction Recommendations
By following these nine simple steps, parents and caregivers can help their baby survive and thrive:
Place your baby to sleep on his or her back at nap time and nighttime,
Use a safety-approved crib with a firm, tight-fitting mattress,
Do not smoke while you’re pregnant or allow anyone to smoke around your baby after he or she is born.
Remove all soft, fluffy or loose bedding and other items from your baby's sleep area.
Use a wearable blanket to replace loose blankets in your baby’s crib,
Do not put your baby to sleep on any soft surface (sofas, chairs, waterbeds, quilts, sheepskins, etc).
Room sharing is safer than bed sharing.
Do not dress your baby too warmly for sleep,- keep room temperature between 68 and 79°F,
.Educate relatives, baby Sitters and other caregivers about these important safety tips.
As a direct result of First Candle/SlDS Alliance research and risk reduction education efforts, more than 3, 000 infant lives are being
spared each year For more information call 800- 991- 7437 or ViSit wwwfirstcandle org
PWNQWf‘WN’T‘
QUICK SET UP:
FEATURES & COMPONENTS (continued):
Read the complete instruction manual for more detailed instructions and explanations.
- PIace Baby's Unit in nursery and place near the crib (do not place
in crib or within child's reach). Plug in AC Adaptor. To turn the
Unit on, turn the Power Switch on and turn the Channel Selector
to Channel A.
0 Place Parent’s Unit in another room. Plug in AC Adaptor. Turn on
with Power Button. Set Channel Selector to Channel A. Set
desved volume level.
0 Test for sound pick up from nursery. Have an adult speak from
softly to loudly. LEDs Will illuminate red with increasing voice
volume. Set Parent's Unit to desired volume level.
BAIY'S UNIT PARENT’S UNIT
A WAR N I N G: THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
- Prevent cord entanglement — do not place Baby’s Unit in crib or within arm‘s reach of baby. Never use
extension cords with AC adapters. Only use the Ac Adapters provided.
0 When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end.
- Test monitor before first use, periodically, and when changing location of the Baby‘s Unit or Parent‘s Unit.
- Do not use monitor near water (such as bathtub, sink, etc.)
- Keep monitor away from heat sources (such as stoves, radiators, etc.) and make sure there is proper
ventilation (not on sofas, cushions, beds, etc. which may block ventilation).
- Nursery monitors use public airwaves to transmit and receive signals. This monitor may pick up signals from
other monitors or similar devices, and signals broadcast by this monitor may be picked up by other receivers.
- This product is not a toy. Do not allow children to play with it.
c This product contains small parts. Adult assembly required. Exercise care when unpacking and
assembling product.
A BATTERY WARNING: A CAUTION:
KEEP SMALL PARTS OUT OF CHILD’S REACH.
0 Remove batteries when product is stored for long
period of time or when batteries are exhausted.
0 Dispose of exhausted batteries properly.
BABY’S UNIT
FEATURES & COMPONENTS:
Release Button
(Open/Close)
AC ADAPTERS (Q)
Channel
Selector
Switch
(Amber LED
low battery)
(Bl inking Amber or
Green LED out of range)
Volume Control Dial —
PARENT'S UNIT (Front View)
PARENTS UNIT (Back View)
Belt Clip
Sound tights
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
Page Count : 2
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : uuid:37552dcc-0d07-4d47-ab94-6ec364fa9489
Producer : Acrobat Distiller 6.0.1 for Macintosh
Create Date : 2004:10:19 08:36:17-04:00
Modify Date : 2004:10:27 11:49:42-04:00
Creator Tool : Adobe Illustrator(R) X
Metadata Date : 2004:10:27 11:49:42-04:00
Document ID : uuid:80775631-21cb-11d9-8e13-0050e4ee454e
Format : application/pdf
Creator : Workstation B
Title : 02110 Monitor IB pg4-1 RevO.eps
Author : Workstation B
EXIF Metadata provided by EXIF.tools