Summer Infant 200T BABY MONITOR User Manual 02000 IB NEW LAYOUT 8 30 10

Summer Infant, Inc. BABY MONITOR 02000 IB NEW LAYOUT 8 30 10

Users Manual

Download: Summer Infant 200T BABY MONITOR User Manual 02000 IB NEW LAYOUT  8 30 10
Mirror Download [FCC.gov]Summer Infant 200T BABY MONITOR User Manual 02000 IB NEW LAYOUT  8 30 10
Document ID1346358
Application IDa/x3vjfRr1JuwSC9xe2/pg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize115.7kB (1446284 bits)
Date Submitted2010-09-20 00:00:00
Date Available2010-09-20 00:00:00
Creation Date2010-08-30 13:44:42
Producing SoftwareAdobe PDF library 8.00
Document Lastmod2010-09-15 11:01:00
Document Title02000 IB NEW LAYOUT (8.30.10)
Document CreatorAdobe Illustrator CS3

User manual
FCC Information
Tips For Improving Reception:
FCC
statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
• Position the Monitor closer to the CAMERA if necessary.
• Move Monitor away from other monitors, cordless phones,
walkie-talkies, etc.; moving even slightly could greatly improve reception.
• If you hear a feedback or squealing noise, move the CAMERA and the
Monitor further away from each other.
This
device
complies
with
15 of must
the FCC
Rules.
Operationreceived,
is subject
to the following
two
conditions:
harmful
interference,
and
(2) Part
this device
accept
any interference
including
interference
that
may cause undesired
(1)
This
device
may
not
cause
harmful
interference,
and
operation.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note:
The Changes
manufacturer
is not responsible
forapproved
ANY interference,
example
RADIO
or TV
interference,
caused
by
CAUTION:
or modifications
not expressly
by Summerfor
Infant
may void
the users
authority
to operate
this
unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
equipment.
Battery Installation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
NOTE:
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Monitor: This step is only needed if replacing battery.
1. Locate the battery compartment door on back of monitor.
2. Slide open battery door and insert battery. Ensure correct connection.
Slide battery door back in place.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiver
Portable Camera Battery Pack:
• Increase the separation between the equipment and the receiver
Set Up & Use
• Connect the equipment into an outlet on a circuit different from that to which the
1. Locate the battery compartment door on bottom of camera battery
pack.
2. Use Phllips Head Screwdriver to remove battery door.
3. Insert 4’AA’ batteries (not included). Ensure correct connection.
4. Place battery door back and screw closed.
5. Place camera ontop of battery pack. Twist camera clockwise untill the
arrow from the camera are aligned with the “lock” arrow on battery
pack.
6. Turn camera to “ON” position. Note: Camera battery pack will supply
portable power for upto 10 hours. Rechargeable batteries are
recommended.
7. To remove camera from battery pack, twist camera counterclockwise
untill the arrow from the camera are aligned with the “UNLOCK” arrow
on the battery pack.
Special Features:
Features & Components:
• Belt Clip: For convenience and portability, you can clip the Monitor to
your belt or waistband after a battery has been installed.
• Consult the dealer or an experienced radio/TV technician for help
CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons. 2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
• Footrest: The Monitor has a built-in footrest for tabletop convenience.
Simply flip out footrest and place the Monitor on a stable, level surface
Summer Infant, Inc. will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is
defective in workmanship or materials. To claim your repair/replacement, the product must be returned to Summer Infant along with a
copy of the original purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of
manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling,
installation, accident, unauthorized repair or alteration. Please contact our Customer Service Department by phone at 1-800-268-6237
or via e-mail at customerservice@summerinfant.com for details.
BATTERY WARNING:
• Sound Lights: The 4 Sound Lights will illuminate on the Monitor
depending on the level of your baby’s sounds. For example, if your
child is just cooing, only one or two lights will illuminate. If your baby
is crying, several will illuminate, depending on how loud she is
crying. This feature is particularly helpful if you are in a noisy room.
• Quick View/Video On/Off Button: This button turns the video
mode on. If you only want to hear your baby, press the Quick
View/Video On/Off Button again to shut off the video. The Quick
View/Video On/Off Button is ideal for easily turning on the video
option in the middle of the night.
• Use only the original rechargeable batteries
provided. Please contact Summer Infant, Inc. for
replacement batteries. Contact information can be
found on page 12 of these instructions or on the
battery itself.
• Do not mix old and new batteries.
• Do not mix alkaline, standard,
or rechargeable batteries.
• Batteries are to be inserted with correct polarity.
• Clean battery and product contacts prior to
battery installation.
• Do not short-circuit supply terminals.
• Only the recommended batteries or equivalent are
to be used, volts and size.
• Remove batteries when product is stored for long
periods of time or when batteries are exhausted.
• Dispose of exhausted batteries properly.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged
under adult supervision.
• Keep all batteries away from children.
THIS PRODUCT CANNOT REPLACE RESPONSIBLE
ADULT SUPERVISION.
• Prevent cord entanglement – do not place Camera in crib
or within arm’s reach of the baby. Use enclosed Security Clips to help
secure cords away from baby’s reach.
Never use extension cords with AC adapters. Only use
the AC Adapters provided.
• When an AC Adapter is plugged into an electrical outlet,
do not touch the exposed end.
• Test monitor before first use, periodically, and when changing location
of the Camera.
• Do not use monitor near water (such as bathtub, sink, etc.).
• Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components.
Do not place on sofas, cushions, beds, etc. which may block
ventilation.
• Nursery monitors use public airwaves to transmit signals. This monitor
may pick up signals from other monitors or similar devices and signals
broadcast by this monitor may
be picked up by other receivers.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required.
Exercise care when unpacking and assembling the product.
AV Jack:
Power
• Multi-Position Camera/Microphone: The Camera/Microphone
should be positioned so it is facing baby as much as possible. This
multi-position feature is unique to Summer Infant nursery monitors. It
allows the microphone to focus on baby’s voice while filtering out
other household noises.
Note: The Monitor’s power button must be turned ON and CAM
pre-selected before connecting the AV cable. Once the AV cable is
connected the Monitor’s controls cannot be activated. For best results
use on a 27” TV or smaller.
Power
Press for three seconds
to power on. Power on
screen will appear
while software is booting up.
CAMERA
cam 1
Press for three seconds
to power off. Power off
screen will appear while
software is booting
down.
Note: Everytime you
power your monitor on
it will default to camera
one.
Brightness Control
To control brightness press brightness control button
from the
touch menu screen. Use up and
down arrows to control brightness.
Pan/Scan- Use up, down,
left and right arrows to
control camera movement.
We at Summer Infant stand behind all of our products. If you are not completely satisfied or
have any questions, please contact our customer service department at
1-800-268-6237 or customerservice@summerinfant.com
(For Europe call +44 (0)208 420 4429 or customerserviceuk@summerinfant.com)
© 2010 Summer Infant, Inc.
Colors and styles may vary.
Please retain information for future
reference. MADE IN CHINA.
8/10
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
Summer Infant Europe, LTD.
Office Suite 6, Second Floor
Bournehall House, Bournehall Road
Bushey, Hertfordshire WD23 3HP UK
+44 (0) 208 420 4429
Please read the following instructions and warnings carefully.
Keep this instruction manual for future reference.
WARNING:
Adult assembly required. Keep small parts
away from children when assembling.
CAUTION:
KEEP SMALL PARTS OUT
OF CHILD’s REACH.
To zoom into picture press the
zoom button
from the touch
menu screen.
The screen will zoom in one leveltoward the center of the screen.
Press zoom out
and the
screen will zoom out to full view.
View Camera
Add Camera
Note: This product can accept up to
four cameras. To order an additional
camera (#28064) please contact our
customer service department by
phone at 1-800-268-6237 or via e-mail at
customerservice@summerinfant.com
for details. For Europe call +44
(0)206-420-4429 or via e-mail at
customerserviceuk@summerinfant.com
Step 1: Place the Monitor in the room from which you want to monitor
your baby (ie. bedroom or living room). Plug an AC Adapter into the AC
Adapter Jack and the other end into a standard electrical outlet.
top of the unit.
Step 2: Press and hold “POWER ” button for 4 seconds to turn on
until video or Summer logo appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF button on
top of the unit.
To add camera press
Camera Button from the
touch menu. Use up and
down arrows to navigate to
the add cam option.
Press
(select) to enter the
add cam menu.
Testing Your Initial Setup:
Be sure to test your Monitor’s reception before initial use.
We also recommend testing your Monitor’s reception periodically. Please
keep in mind that the Slim & Secure™ Handheld Color Video Monitor will
not provide the same level of picture quality as your television with
cable, satellite dish, or digital service.
Delete Camera
To view a camera in use press
camera button from the touch
menu.
Use up and down arrows to
navigate to the view cam
option.
Press
(select) to enter the
view cam menu.
Once view cam is highlighted the
4 cameras will appear. Note: If
view cam was selected by accident press left arrow key to exit the
numbered cam menu.
Use the up and down arrows to
highlight the camera you would
like to view and press select to
view that option.
Use arrows to navigate to
the delete cam option.
Press
(select) to enter the
delete cam menu.
Use the left and right arrows t
highlight the camera you would like
to delete and press select to
delete that camera. To exit hit the
home key
Camera Scan
cam 1
Press and hoild the Code button on
back of camera head until green
LED starts blinking.
To scan all cameras in use for 8
second intervals, press camera
button from the touch menu. Use the
up and down arrows to navigate to
the scan option. Press select to
enter the scan mode.
To Use the Video Monitor in Portable Mode:
For use in portable mode, the Monitor requires 1 3.7V LITHIUM-ION
rechargeable battery (included).
I N S T R U C T I O N M A N UA L
Zoom
Pan/Scan with arrows
To Use in Video and Audio Mode:
Tips:
• Before using Monitor in portable mode (battery), be sure to
charge battery 12-16 hours.
• To charge battery, plug the larger AC Adapter into the
Monitor’s AC Adapter Jack. Plug the other end into a standard
electrical outlet.
• After initial 12-16 hour charge, to achieve optimal battery life,
charge battery overnight and unplug all day during use.
• Note: Only charge battery when low indicator light comes on.
Constant recharging of your battery before low battery indicator
light comes on will decrease the life of your batteries.
• When battery is low, the Power On LED will illuminate amber,
indicating that the battery needs to be recharged.
• To conserve battery power, use AC Adapter whenever possible.
Remove battery during long periods of non-use.
• If battery is exhausted, remove immediately from the Monitor.
• Properly dispose of exhausted battery.
A blue rectangle will
appear around the
button you are pressing- to indicate to the
user which button is
pressed.
Brightness Camera Zoom Remote Camera Pan
Left and Right
Options + and -
MONITOR
To test sound quality, have one adult speak in both a normal tone and a
whisper near the crib. Adjust volume on the Monitor’s Volume
Adjustment as needed.
Home
Tap anywhere on the
touchscreen L and
the menu bars will
appear. Menu
disapears after
10-12 seconds of
inactivity.
To Wall Mount:
To test reception you will need two adults. One adult should view the
picture on the Monitor while the other is in the nursery to adjust the
Camera. Often the quality of the reception can be improved by slightly
repositioning the Camera, Monitor, or both. It may help to place a stuffed
animal or doll in the crib to simulate the position and size of your baby.
Adjust the picture quality on the Monitor as needed by using the
Brightness Adjustment on the front of the Monitor.
digital color video monitor
Home Buttonallows user to
escape from menu
at anytime.
Video On/Off
OFF
Step 4: To turn the monitor off completely, press and hold the
“POWER ” button for 3 seconds.
02000
Tools required:
screwdriver (not included)
For technical support
see back page.
For use with children
from birth and up.
Volume Control
Talk Back
Pan/Scan
Set Up & Use
1) Pre-drill a hole in the wall
(3/16", 4.8mm, drill bit) (Figure A).
2) Insert the wall anchor (included)
into the hole and with a hammer,
tap gently on the end until the wall
anchor is flush with the wall.
3) Insert the screw (included) into the
wall anchor and tighten screw until
only 1/4" (6.2mm) of the screw
is exposed.
4) Insert AC Adapter into the Camera’s
AC Adapter Jack.
5) Slide the back of the Camera down
onto the screw until the Camera is secure to the wall.
6) Plug the AC Adapter into a standard electrical outlet.
7) Secure the cord to the wall using the 6 Security Clips
included to keep cord away from baby's reach (Figure B).
8) Slide switch on side of Camera to ON and the
POWER ON LED will illuminate solid green.
FPO
Wall Anchor (1)
and Screw (1):
Security Clips (6):
ON
Table Top or Wall Mounting:
Determine a location for the Camera that will provide
the best view of your baby in his crib. Place the Camera on
a flat surface, such as a dresser, bureau, or shelf. Or mount
the Camera on a wall. Be sure not to place camera in crib or within
arm’s reach of baby. Do not place the Camera near open
windows, direct sunlight or heat sources. Be sure to test
reception and Camera positioning before mounting to a wall
(see "Testing Your Initial Set Up" section).
WARNING:
Monitor Charging Stand:
• Video Sleep Mode: While operating on battery power, the video
screen will go to sleep, to conserve battery power. Audio and
sound lights will function normally. Press the Video On/Off to resume
viewing. This option is NOT available when using AC adapter.
• A/V Cable: To view video through your TV, plug the AV cable jack
connection into monitor and connect the other ends into the
corresponding color coded parts on your TV. Scroll through A/V
inputs on your television’s menu until monitor picture is visible.
Summer Infant, Inc. Monitor Warranty Policy
Camera Base:
Camera (Front View):
• Night Vision: In a darkened room, the Monitor will automatically
use its infrared LED’s to transmit a clear image of baby, so you can
see your child at night!
receiver is connected.
AC Adapter: (2)
Monitor:
While syncing the camera will blink,
once fully synced the camera will
turn solid black.
The cameras that are not synced
will be gray and the synced cameras will be black. The camera will
automatically sync to the next
available channel.
Problem Solving:
No picture or sound on Monitor
• Make sure the Monitor is turned on
• Make sure the AC Adapters are plugged in
• Make sure the outlets are working
• Make sure Monitor and Camera are
SYNCHED up.
Sound but no picture on Monitor
• Press the Quick View/Video On/Off Button
once to turn on video mode
• Try adjusting the Brightness Control on the
Monitor
• Test reception by moving the Monitor and/or
CAMERA to different locations
The monitor will automatically scan
through all camera options every 8
seconds. To stop scan mode at anytime
press the home button. If scan mode
stops on an undesired camera selection,
press camera button from touch menu
and select view camera option. Follow
directions above listed in view camera.
Picture but no sound
• Turn up the volume on the Monitor using
the Volume Control
Picture not clear
• Position the Monitor closer to the CAMERA
if necessary
• Move Monitor away from other monitors,
cordless phones, walkie-talkies, etc.
• Try adjusting the Brightness Control on the
Monitor
• Test reception by moving the Monitor
and/or CAMERA to different locations
Squealing sound
• Move the CAMERA and the Monitor
further away from each other
If you experience a problem that is not noted in this manual, please do not return the product to the
store. Our Customer Service Department may have a simple solution to your problem. Please contact us
at 1-800-268-6237 or email us at customerservice@summerinfant.com.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : 02000 IB NEW LAYOUT (8.30.10)
Creator Tool                    : Adobe Illustrator CS3
Create Date                     : 2010:08:30 13:44:42-04:00
Modify Date                     : 2010:09:15 11:01+08:00
Metadata Date                   : 2010:09:15 11:01+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 108
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6885 bytes, use -b option to extract)
Document ID                     : uuid:6FB989F7CEB5DF11B4348D26F7AF5961
Instance ID                     : uuid:f8e02451-d6d2-48d6-bc33-e39b0210cfcf
Derived From Instance ID        : uuid:6EB989F7CEB5DF11B4348D26F7AF5961
Derived From Document ID        : uuid:F2839E7CA0B5DF11B4348D26F7AF5961
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/scottmcguire/Desktop/02000 IB/camera base.tif, /Users/scottmcguire/Desktop/02000 IB/summer pod dock.tif, /Users/scottmcguire/Desktop/02000 IB/side view.tif, /Users/scottmcguire/Desktop/02000 IB/camera no base.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Del Cam 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Del Cam 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Add Cam 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Pan-Scan Screen 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Pan-Scan Screen 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam OPTS 2.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02800:05/02800:05 Monitor IB/~Hi Res Images/02800 camera-back.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02630:31 IB/02630 Monitor IB/~Hi Res Images/Screws 2reva_BW.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02630:31 IB/02630 Monitor IB/~Hi Res Images/Screws 2reva_BW.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Zoom Screen.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Volume Screen.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 3.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 4.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 5.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02800:05/02800:05 Monitor IB/~Hi Res Images/02800 battery placement.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02800:05/02800:05 Monitor IB/~Hi Res Images/02800 belt inset.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02800:05/02800:05 Monitor IB/~Hi Res Images/02800 handheld-beltclip.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam Sync 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Cam OPTS 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 View Cam 2.tif, /Users/scottmcguire/Desktop/02000 IB/02000 View Cam 1.tif, /Users/scottmcguire/Desktop/02000 IB/Touch.psd, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Pan-Scan Screen 1.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Brightness Screen 6.tif, /Users/scottmcguire/Desktop/02000 IB/summerlogo.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Side Beauty.tif, /Users/scottmcguire/Desktop/02000 IB/02000 Static Label.tif, /Users/scottmcguire/Desktop/02000 IB/new side monitor.tif, /Users/scottmcguire/Desktop/02000 IB/battery.tif, /Users/scottmcguire/Desktop/02000 IB/belt clip.tif, /Users/scottmcguire/Desktop/02000 IB/code button.tif, /Users/scottmcguire/Desktop/02000 IB/pod monitor.tif, /Users/scottmcguire/Desktop/02000 IB/plug.tif
Manifest Reference Instance ID  : uuid:D8D494188FB2DF11AF2AE518FFF62940, uuid:2CE3AE5389B2DF11AF2AE518FFF62940, uuid:99AB7B4089B2DF11AF2AE518FFF62940, uuid:04148C6F9CB2DF11AF2AE518FFF62940, uuid:3834824BD8AADF11A3C6F430120CD9D4, uuid:D2A217FBD7AADF11A3C6F430120CD9D4, uuid:F75FD7827A8BDF11A363ADB89493619D, uuid:F75FD7827A8BDF11A363ADB89493619D, uuid:F75FD7827A8BDF11A363ADB89493619D, uuid:F75FD7827A8BDF11A363ADB89493619D, uuid:84B306EBD7AADF11A3C6F430120CD9D4, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:76362D597B8BDF11A363ADB89493619D, uuid:C4DD804E7B8BDF11A363ADB89493619D, uuid:72792F8ED7AADF11A3C6F430120CD9D4, uuid:2E3CE4B96456DE11975F8CDE7B1F47FB, uuid:33a9812a-5fac-11d8-ace4-ed151ccfa951, uuid:33a9812a-5fac-11d8-ace4-ed151ccfa951, uuid:C286675C7A8BDF11A363ADB89493619D, uuid:AAB43AD7D0AADF11A3C6F430120CD9D4, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:FF60B2B0D5AADF11A3C6F430120CD9D4, uuid:69D74CA1D5AADF11A3C6F430120CD9D4, uuid:60D74CA1D5AADF11A3C6F430120CD9D4, uuid:610E36D3D5AADF11A3C6F430120CD9D4, uuid:154766C2D5AADF11A3C6F430120CD9D4, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:F8075BE47377DE11BC5E8B1AB79CAA55, uuid:89BE37D16456DE11975F8CDE7B1F47FB, uuid:1054E2C06456DE11975F8CDE7B1F47FB, uuid:F384398F7A8BDF11A363ADB89493619D, uuid:F75FD7827A8BDF11A363ADB89493619D, uuid:42E79F5AD7AADF11A3C6F430120CD9D4, uuid:F2D0AE48D7AADF11A3C6F430120CD9D4, uuid:E9D0AE48D7AADF11A3C6F430120CD9D4, uuid:40D50948EE00DF1184049819ED036CA3, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:C4DD804E7B8BDF11A363ADB89493619D, uuid:182DCC7FD5AADF11A3C6F430120CD9D4, uuid:512C030FAC81DD118305885C6F90DAE1, uuid:DA25BC804C8BDF11A363ADB89493619D, uuid:C8EB1D7B508BDF11A363ADB89493619D, uuid:EDAB061989B2DF11AF2AE518FFF62940, uuid:34E3AE5389B2DF11AF2AE518FFF62940, uuid:DC1B1B9588B2DF11AF2AE518FFF62940, uuid:CD8002FBAFB5DF1192BADC4308FEC479, uuid:9480CF3389B2DF11AF2AE518FFF62940, uuid:8C80CF3389B2DF11AF2AE518FFF62940
Manifest Reference Document ID  : uuid:2A9BB36E89B2DF11AF2AE518FFF62940, uuid:D9271C10E4B1DF119D42EB6CA2BE46DA, uuid:45EDBC3B82B2DF11AF2AE518FFF62940, uuid:FE138C6F9CB2DF11AF2AE518FFF62940, uuid:3734824BD8AADF11A3C6F430120CD9D4, uuid:D1A217FBD7AADF11A3C6F430120CD9D4, uuid:F65FD7827A8BDF11A363ADB89493619D, uuid:F65FD7827A8BDF11A363ADB89493619D, uuid:F65FD7827A8BDF11A363ADB89493619D, uuid:F65FD7827A8BDF11A363ADB89493619D, uuid:83B306EBD7AADF11A3C6F430120CD9D4, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:75362D597B8BDF11A363ADB89493619D, uuid:C3DD804E7B8BDF11A363ADB89493619D, uuid:71792F8ED7AADF11A3C6F430120CD9D4, uuid:DEDEB7858847DE11A097FE435DAC6C2B, adobe:docid:photoshop:2a9105c0-5f9a-11d8-ace4-ed151ccfa951, adobe:docid:photoshop:2a9105c0-5f9a-11d8-ace4-ed151ccfa951, uuid:C186675C7A8BDF11A363ADB89493619D, uuid:A9B43AD7D0AADF11A3C6F430120CD9D4, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:FE60B2B0D5AADF11A3C6F430120CD9D4, uuid:68D74CA1D5AADF11A3C6F430120CD9D4, uuid:202DCC7FD5AADF11A3C6F430120CD9D4, uuid:600E36D3D5AADF11A3C6F430120CD9D4, uuid:144766C2D5AADF11A3C6F430120CD9D4, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:1AE2B45D8747DE11A097FE435DAC6C2B, uuid:D98C8B918D47DE11A097FE435DAC6C2B, uuid:DA8F76B48747DE11A097FE435DAC6C2B, uuid:F284398F7A8BDF11A363ADB89493619D, uuid:F65FD7827A8BDF11A363ADB89493619D, uuid:41E79F5AD7AADF11A3C6F430120CD9D4, uuid:F1D0AE48D7AADF11A3C6F430120CD9D4, uuid:E8D0AE48D7AADF11A3C6F430120CD9D4, uuid:A6DB97C1EC00DF1184049819ED036CA3, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:C3DD804E7B8BDF11A363ADB89493619D, uuid:172DCC7FD5AADF11A3C6F430120CD9D4, uuid:30ED5D8EF723DD11AF9EEA22E52FD9E3, uuid:DBCD8C02AC8ADF11958F9E86A8631B2A, uuid:E7DB1A6E358BDF11A363ADB89493619D, uuid:0DD2532A85B2DF11AF2AE518FFF62940, uuid:9851C1B686B2DF11AF2AE518FFF62940, uuid:DB1B1B9588B2DF11AF2AE518FFF62940, uuid:CC8002FBAFB5DF1192BADC4308FEC479, uuid:1EA3ABCAE3B1DF119D42EB6CA2BE46DA, uuid:DF3AA701E4B1DF119D42EB6CA2BE46DA
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 29.000000
Max Page Size H                 : 25.000000
Max Page Size Unit              : Inches
Font Name                       : MyriadPro-BoldIt, MyriadPro-Bold, HelveticaNeue-Bold, HelveticaNeue-MediumCond, HelveticaNeue-BoldCond, HelveticaNeue-Condensed, Geometric706BT-BlackB, Geometric706BT-MediumB, GillSans
Font Family                     : Myriad Pro, Myriad Pro, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Geometric 706 BT, Geometric 706 BT, Gill Sans
Font Face                       : Bold Italic, Bold, 75 Bold, 67 Medium Condensed, 77 Bold Condensed, 57 Condensed, Black, Medium, Regular
Font Type                       : Open Type, Open Type, Bitmap, Bitmap, Type 1, Type 1, Type 1, Type 1, Type 1
Font Version                    : Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, 001.000, 001.000, 2.0-1.0, 2.0-1.0, 001.002
Font Composite                  : False, False, False, False, False, False, False, False, False
Font File Name                  : MyriadPro-BoldIt.otf, MyriadPro-Bold.otf, , , HelveNeuBolCon; HelveticaNeue, HelveNeuCon; HelveticaNeue, GeomeBTBlaB; Geometric706BT, GeomeBTMedB; Geometric706BT, GillSan; Gill Sans 1
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Reflex Blue C, PANTONE 266 C
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : White, Black, PANTONE 266 C, White 2, PANTONE 137 U, PANTONE Reflex Blue C, C=58 M=0 Y=100 K=0 1, C=0 M=48 Y=100 K=0 1, C=75 M=50 Y=0 K=0 1, Blue CMYK (75C/50M), Black, C=6 M=100 Y=80 K=1 1
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, SPOT, PROCESS, PROCESS, SPOT, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 79.000000, 0.000000, 0.000000, 100.000000, 58.471001, 0.000000, 75.000000, 75.000000, 74.902000, 6.274498
Swatch Colorant Magenta         : 0.000000, 0.000000, 90.000000, 0.000000, 35.000000, 72.999992, 0.003099, 48.000000, 50.000000, 50.000000, 67.843094, 100.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 0.000000, 0.000000, 90.000000, 0.000000, 100.000000, 100.000000, 0.000000, 0.000000, 67.058800, 80.392197
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 2.000000, 0.003099, 0.000000, 0.000000, 0.000000, 90.196098, 0.784302
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Producer                        : Adobe PDF library 8.00
Has XFA                         : No
Page Count                      : 1
Creator                         : Adobe Illustrator CS3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PZK-200T

Navigation menu