Summer Infant 28000T Baby monitor User Manual 28000 Full IB 1 12
Summer Infant, Inc. Baby monitor 28000 Full IB 1 12
Users manual
FCC Inlormatlon This device complies With part i5 of the FCC Rules. Operation is subject to the following two conditions: (i) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by Summer Infant may void the users authority to operate this equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ~ Reorient or relocate the receiver - Increase the separation between the equipment and the receiver - Consult the dealer or an experienced radio/TV technician for help / "We LOVE our customers! ~vi,/ Get to know us at: www.summerinfant.com We at Summer infant stand behind all ofour products. if you are not completely satisfied or have any questions, please contact our customer servtce department at T7800725876237 or (ustomerservice@summerinfam.c0m (For Europe Call +44 (OJZUS 420 4429 or customerserviceuk@summerinfant corn) G7 2010 Summer Infant, Inc Colors and styles may vary Please retain information for future reference, MADE IN CHINA. 2/11 Summer infant Europe, not once sine 5, Second Floor Bournehail House, Bournehail Road Bushey, Hertfordshire wozs sHP ui< +44 (u) ms 420 4429 Summer Infant. Inc. 1275 Park East Drive Waansocket, Ri 02895 USA 1780046876257 12 20000 Please read the following instructions and warnings carefully. Keep this instruction manual for future reference, Summer“ Tools required: screwdriver (not included) For technical supper! see back page. For use with children from birth and up. AWARNING: Adult assembly required. Keep small parts away irorn children when assembling. /' 7 at...“ INSTRUCTION MANUAL BABY MOMENTS“ FLAT SCREEN DIGITAL COLOR VIDEO MONITOR AWARNING: STRANGULATION HAZARD — Keep cord out of baby’s reach. NEVER place camera or cords within 3 feet of the crib. Use enclosed Security Clips to help secure cord away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. AWARNING: THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. - STRANGULATION HAZARD — Keep cord out of baby's reach. NEVER place camera or cords within 3 feet of the crib. Use enclosed Security Clips to help secure cord away from baby‘s reach. Never use extension cords with Ac Adapters. Only use the AC Adapters provided. - When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end. 0 Test monitor before first use, periodically, and when changing location of the Camera. - Do not use monitor near water (such as bathtub, sink, etc.). . Keep monitor away from heat sources (such as stoves, radiators, etc.). - Make sure there is proper ventilation around all monitor components. Do not place on sofas, cushions, beds, etc. which may block ventilation. - Nursery monitors use public airwaves to transmit signals. This monitor may pick up signals from other monitors or similar devices and signals broadcast by this monitor may be picked up by other receivers. 0 This product is not a toy. Do not allow children to play with it. 0 This product contains small parts. Adult assembly required. Exercise care when unpacking and assembling the product. IMPORTANT SAFETY INSTRUCTIONS 16) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adiusting only those controls that are covered by the operating instructions as an improper adiustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicated a need for service. 17) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 18) Safety Check - Upon completion of any service or repairs to this product. ask the service technician to perform safety checks to determine that the product is in proper operating condition. 19) Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 20) Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Summer Infant, Inc. Monitor Warranty Policy Summer lnlant, Inc. WlII repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the product must be returned to Summer infant along with a copy of the original purchase receipt. in the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair or alteration. Please contact our Customer Service Department by phone at 1780072686237 or via email at customerservice@summerintant.com for details. ll you experience a problem that is not noted in this manual, please do not return the product to the store. our Customer Service Department may have a simple solution to your problem Please contact us at 1-800-263-6257 or email us at customerservice@summerinlant.com. 11 CAUTIO N RlSK or ELECTRIC SHOCK DO NOT OPEN Do not EXPGSE T0 RAlM on MUlSTURE IMPORTANT SAFETY INSTRUCTIONS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4) Follow Instructions - All operating and use instructions should be followed. 5) Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6) Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7) Water and Moisture - Do not use this product near water - for example, near a bath tub. wash bowl. kitchen sink. or laundry tub; in a wet basement; or near a swimming pool; and the like. 8) Accessories - Do not place this product on an unstable cart. stand. tripod. bracket. or table. The product may fall. causing serious injury to a child or adult, and serious damage to the product. Use only with a cart. stand. tripod. bracket. or table recommended by the manufacturer. or sold with the product. Any mounting of the product should follow the manufacturer's instructions. and should use a mounting accessory recommended by the manufacturer. 9) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed. sofa. rug, or other similar surfaces. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10) Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home. consult your product dealer or local power company. For products intended to operate from battery power. or other sources. refer to the operating instructions. 11) Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. paying particular attention to cords at plugs. convenience receptacles. and the point where they exit from the product. 12) Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. or where it can fall into such power lines or circuits. When installing an outside antenna system. extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13) Overloading - Do not overload wall outlets. extension cords. or integral convenience receptacles as this can result in a risk of fire or electric shock. 14) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 15) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 10 FEATURES & COMPONENTS: MONITOR: — Video Orr/on Fold Down (FRONT): a. Picture Capture (BACK): 5P°°ker Antenna Mode Sound . lights Swrtch USB Port Menu Volume Volume Control Up Control Power Down (On/0M) Brighlnoss S‘Iecl Brightness AC Adapter Down Up luck CAMERA: (mom): (BACK): I—— Power On LED — Nighttime lED's (tor darkened room) — Lens u — Microphone Power (On/Off) AC Adapter Jock (bottom of unit) Code Button (bottom of unit) AC Adapter (1) use Cable Security Clips (so) Wall Anchor (one) Screw (one) Parent u t Baby Unit SET UP & USE: CAMERA AWARNING: STRANGULATION HAZARD — Keep cord out of baby’s reach. MEIER place camera or cords within 3 feet of the crib. Use enclosed Security Clips to help secure cord away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provrded. Table Top or Wall Mounting: Determine a location for the CAMERA that will provide the best view at your baby in his crib. Place the CAMERA on a flat surface, such as a dresser, bureau, or shell (Figure A). Or mount the CAMERA on a wall (Figure B). NEVER place camera or cords within 3 ieet of the crib. Secure the cord to the wall using the 6 Security Clips included to keep cord away from baby’s reach. Be sure to test reception and CAMERA positioning belore mounting to a wall (see "Testing Your Initial Set Up" section). security clips PROBLEM SOLVING: No picture or sound on Monitor - Make sure the Monitor is turned on - Make sure the AC Adapters are plugged in - Make sure the outlets are working - Make sure Monitor and Camera are SYNCHED up. (refer to "Synching MONITOR and CAMERA" section on page 7) Sound but no picture on Monitor - Press the Quick ViewNideo On/Oll Button once to turn on video mode - Try adjusting the Brightness Control on the Monitor - Test reception by moving the Monitor arid/or CAMERA to dilferent locations Picture but no sound - Turn up the volume on the Monitor using the Volume Control Picture not clear - Position the Monitor closer to the CAMERA it necessary - Move Monitor away tram other monitors, cordless phones, walkie-talkies, etc. - Try adjusting the Brightness Control on the Monitor - Test reception by moving the Monitor and/or CAMERA to dilferent locations Sauealing sound - Move the CAMERA and the Monitor further away from each other TIPS FOR IMPROVING RECEPTION: - Position the Monitor closer to the CAMERA if necessary. ' Move Monitor away from other monitors, cordless phones, walkie—talkies, etc.; moving even slightly could greatly improve reception. - It you hear a feedback or squealing noise, move the CAMERA and the Monitor further away from each other. SPECIAL FEATURES: - Sound Lights: The 5 Sound Lights will illuminate on the Monitor depending on the level of your baby's sounds. For example, if your child is just cooing, only one or two lights will illuminate. If your baby is crying, several will illuminate, depending on how loud she is crying. This leature is particularly helpful if you are in a noisy room, ' Quick View/Video OHIO“ Button: This button turns the video mode on. If you only want to hear your baby, press the Quick ViewNideo On/OII Button again to shut off the video. The Quick ViewNideo On/Olf Button is ideal for easily turning on the video option in the middle of the night. - Night Vision: In a darkened room, the Monitor will automatically use its inirared LED’s to transmit a clear image of baby, so you can see your child at night! - Multi-Position Camera/Microphone: The Camera/Microphone should be positioned so it is facing baby as much as possible. This multi-position feature is unique to Summer Infant nursery monitors, it allows the microphone to focus on baby’s voice while filtering out other household noises. SET UP 8: USE (continued): Table Top or Wall Mounting: Determine a location for the Camera that will provide the best View of your baby in his crib. Place the Camera on a flat surface, such as o dresser, bureau, or shell. Or mount the Camera on a wall. CAUTION: BE SURE NOT TO PLACE CAMERA IN CRIB OR WITHIN ARM'S REACH OF BABY. Do not place the Camera near open windows, direct sunlight or heat sources. Be sure to test reception and Camera positio ng belore mounting to a wall (see "Testing Your Initial Set Up" section). To Wall Mount: 1) Pre-drill a hole in the wall (3/16", 4.8mm, drill bit) (Figure A). 2) Insert the wall anchor (included) into the hole and with a hammer, tap gently on the end until the wall anchor is tlush with the wall. 5) Insert the screw (included) into the wall anchor and tighten screw until only 1/4" (62mm) of the screw is exposed. 4) Insert AC Adapter into the Comera’s AC Adapter Jack. 5) Slide the back of the Camera down onto the screw until the Camera is secure to the wall, 6) Plug the AC Adapter into a standard electrical outlet. 7) Secure the cord to the wall using the 6 Security Clips included to keep cord away from baby‘s reach (Figure B). 8) Slide switch on side of Camera to ON and the POWER ON LED will illuminate solid green. MONITOR To Use in Video and Audio Mode: Step 1: Place the Monitor in the room from which you want to monitor your baby (ie. bedroom or living room). Plug an AC Adapter into the AC Adapter Jack and the other end into a standard electrical outlet. Step 2: Press down "POWERO " button to turn on until video or Summer logo appears on screen. Step 3: For audio and no video, press the VIDEO ON/OFF button on top of the unit. Step 4: To turn the monitor all completely, press and hold the "POWERG ” button for 3 seconds. ADDING ADDITIONAL CAMERA: ADDING ADDITIONAL CAMERA (continued): Note: This product can accept up to tour cameras. To order an additional camera (#ZB1U4), please contact our Customer Service Department by phone at 1—800'268—6237 or via email at customerservice@summerinfantcom tor details, (For Europe Call +44 (0)208 420 4429 or customerserviceuk@summerintant,com) Please Note: The SCAN, DEL CAM, ADD CAM and VIEW CAM menu options are only used with additional cameras. Testing Your Initial Setup: Please be sure Mode Switch on side of Monitor is switched up to monitor mode and test reception before initial use, We also recommend testing your Monitor's reception periodically Please keep in mind that the Baby MomentsVM Flat Screen Digital Video Monitor will not provide the same level of picture quality as your television with cable, satellite dish, or digital service. To test reception you will need two adults. One adult should view the picture on the Monitor while the other is in the nursery to adjust the Camera. Otten the quality of the reception can be improved by slightly repositioning the Camera, Monitor, or both. It may help to place a stuffed animal or doll in the crib to simulate the position and size 01 your baby. Adjust the picture quality on the Monitor as needed by using the Brightness Adjustment on the side of the Monitor. To test sound quality, have one adult speak in both a normal tone and a whisper near the crib. Adjust volume on the Monitor’s Volume Adjustment as needed. To Mount Parents Video Unit (TV) Under Cabinet: Step 1: Swing out Wdeo Unit Base (Figure D). Step 2: Slide dial on Wdeo Unit Base from ”lock Icon" to "unlock Icon”(Figure E). Step 3: Mount Video Unit Base to underneath cabinet using included screws (Figure F). Step 4: Slide Video Unit back into \fideo Unit base and move dial on Wdeo Unit base back to lock. To use Wdeo Unit in areas around the house, simply move dial on \fideo Unit base to unlock, remove unit, and swing Video Unit base back to standard position. Synchlng Monitor and CAMERA: The Monitor and Camera are synched at the factory for privacy reasons. If the Monitor and Camera are not synching with each other for any reason, please sync them as described below. Step 1: Move the Monitor to the same area as the Camera. With both the Camera and Monitor on, press the MENU button once to call up the OPTION menu. Using up and down arrows on front of monitor, scroll to ADD CAM and press SELECT button. Step 2: The next available camera will be highlighted green on the screen. Press SELECT button, Step 3‘ The selected camera will blink on screen. Step 4‘ Press the pair button on bottom of camera and you should then see a picture lrorn the camera on the monitor. Step 5: if this is unsuccessful, you should repeat steps above making sure the Camera and Monitor are close enough to each other (or synching. Picture Capture Feature: 1: This unit can take and store up to 50 images. . 0 take a snapshot, quickly press the CAMERA button on top of the monitor. 3: You will see a save or erase menu. 4: Hit the select button to save. Scroll down to erase option and hit selecr button to erase. To Review Pictures: 1: Slide Mode Button on side 01 monitor down to photo mode, ress select to View an image. ress right or left scroll buttons to move through images. ress scroll button and select button to delete photo. 5: Use scroll and select buttons to choose to delete, not delete or erase all. To Enter Into Slide Show Mode: 1: Make sure mode button on side of monitor is in photo mode. 2: Use lelt scroll button to choose SLIDESHOW and press select button. 3: There are 3 options to choose from: a. Most Recent - choose to scroll through ‘lU latest snapshots b. All Photos - choose to see all snapshots c. Timing - select this option to choose a 3, 5 or 8 second delay between images. To View Pictures On A Computer: 1: To download pictures lrorn the Monitor to your PC, please visit www.summerintant.com/sottware tor instructions and software.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : 28000 Full IB 1-12 Metadata Date : 2011:03:01 15:49:05-05:00 Modify Date : 2011:03:01 15:49:05-05:00 Create Date : 2011:03:01 15:49:05-05:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 48 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6140 bytes, use -b option to extract) Instance ID : uuid:7c654611-41ab-9245-8400-cc0b39fce2dc Document ID : xmp.did:FA7F1174072068118A6DE277C43C5569 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:8e26cee5-fe37-2c4c-b06e-88edd9809a53 Derived From Document ID : xmp.did:FA7F1174072068118C14A662AB0263E2 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:FA7F1174072068118C14A662AB0263E2, xmp.iid:FA7F1174072068118A6DE277C43C5569 History When : 2011:02:08 11:53:44-05:00, 2011:03:01 15:48:49-05:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/admin/Desktop/Monitor Rework/Instructions/02640 IB Rework/Instructions/~Hi Res Images/02640 Figure B Baby.tif, /Users/admin/Desktop/Monitor Rework/Instructions/02640 IB Rework/Instructions/~Hi Res Images/VV7M5656_grayscale.jpg, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 TV under Cabinet.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 TV Back View.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02500 Monitor IB/02500 Monitor IB/links/Wall Mount & Screws_B-W.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02500 Monitor IB/02500 Monitor IB/links/Security Clip_B-W.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Picture Cable.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02630:31 IB/02630 Monitor IB/~Hi Res Images/Screws 2reva_BW.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/02630:31 IB/02630 Monitor IB/~Hi Res Images/Screws 2reva_BW.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Plug 2.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Plug 1.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Camera Back.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Camera Front.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Product.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Front.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 Back.tif, /Users/admin/Public/work folder/Instructions/Monitor Instructions/28000 Monitor IB/28000 TV Base Lock.tif Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 11.000000 Max Page Size H : 8.501221 Max Page Size Unit : Inches Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, Black, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999998, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000004, 10.000002, 0.000000, 25.000000, 39.999996, 50.000000, 55.000000, 25.000000, 30.000002, 35.000004, 39.999996, 39.999996, 50.000000, 74.902000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000004 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000004, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 10.000002, 14.999998, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000004, 39.999996, 50.000000, 60.000004, 65.000000, 70.000000, 70.000000, 67.843094, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000004, 50.000000, 19.999998, 39.999996, 50.000000, 60.000004, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 67.058800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999996, 0.000000, 10.000002, 25.000000, 35.000004, 50.000000, 70.000000, 90.196098, 100.000000, 89.999405, 79.998795, 69.999702, 59.999104, 50.000000, 39.999401, 29.998802, 19.999701, 9.999103, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000 Producer : Adobe PDF library 9.90 Page Count : 6 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools