Summit Data Communications SDCMSD40NBT 802.11abgn (1X1) + Bluetooth (2.1) module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1783098
Application ID	nzqAdH67hi6VPDLBZJIXgw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	97.93kB (1224098 bits)
Date Submitted	2012-09-05 00:00:00
Date Available	2013-03-04 00:00:00
Creation Date	2012-09-03 17:32:43
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-09-03 17:41:12
Document Title	user manual
Document Creator	PScript5.dll Version 5.2.2

DT430
SPECIFICATIONS
System
Processor
RAM
Storage
Operating System
Display
Display Resolution
Network Interface
Control Switch and Button
Indicator
Speaker/ Microphone
Input/Output Ports
ARM 800 MHz
512MB
4GB Flash
Microsoft® Windows® CE 6.0; Windows® Mobile 6
4.3” TFT‐LCD with resistive touch; outdoor‐viewable display
272 x 480 (WQVGA)
Built‐in IEEE 802.11a/b/g/n WLAN and Bluetooth 2.1 with EDR
1 power button, 4 front buttons
1 power‐on LED indicator, 1 WLAN enable/ communication indicator
Built‐in speakers; 1 mono microphone
1 headset jack, 1 USB 1.1 host, 1 cradle interface (USB2.0 and charging), 1 DC‐in jack
Power
AC/DC Adapter
Battery Type
Input: 100 – 240V AC; Output: 5V DC, 3A
Li‐ion battery 3760 mAh, 3.7V
Mechanical
Enclosure
Stylus
Dimensions (H x W x D)
Weight
PC+ABS, TPR
Non‐electronic tip
6.3 x 3.4 x 1.2 in/ 160 x 86 x 30 mm
0.9 lbs/ 415 g
Environmental
Regulatory
Operating Temperature
Humidity
FCC Class B, CE, C‐Tick, RoHS compliant
Operation: 0°C ‐ 40°C; Storage: ‐20°C ‐ 60°C
0% ‐ 90% non‐condensing
* Specifications subject to change without notice
DT430
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the DT430, part of the POS
Handheld line. The DT430 offers a 4.3” outdoor‐viewable
display, in a compact, rugged, and lightweight package.
The DT430 enables efficient point‐of‐service applications,
inventory management, and field services. The DT430
Point‐of‐Service Handheld provides the precise features needed to streamline
operations and improve productivity, data accuracy, and service.
PACKAGE CONTENTS
1.One DT430
2.One battery pack
3.Basic operation guide
4.Stylus lanyard and hand strap
PRECAUTIONS
 Always exercise care when operating and handling the DT430.
 Do not disassemble any portion of the DT430. It will void any product warranty on
DT430.
 Do not use any power adapter or charging cradle other than the one provided with
the device or acquired from the manufacturer or its partners.
 In the unlikely event that abnormal noise, strange odor, or smoke is present,
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2012, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademarks of DT Research, Inc.
ENGLISH
immediately power down the DT430 and disconnect all power sources. Please
report the problem to your device provider immediately.
 Product label is on the battery compartment; it will be seen while loading the
battery.
DT430
DT430 LED Status Indicators
DT430 I/O Ports
.Left
Front
Rear
Right
1. Power Mode Status Indicator:
Blue: Device is powered on
Blinking Blue: Main battery charging
Orange: Low battery mode
Blinking Orange: Extremely low battery mode
Off: Device is powered off or in suspend mode
2. Wi‐Fi Status Indicator:
Blue: The device has been connected to a wireless AP
Blinking blue: The device is connecting to a wireless AP
Off: Wi‐Fi is disabled
Top
Bottom
Programmable buttons
Suspend/ Resume
Speaker
Battery
Battery pack switch
Audio jack
DC‐in
Stylus
Cradle connector
:Enable/ disable soft keyboard (Programmable)
:Suspend/ Resume
:Programmable
Hold
:System Utility
ENGLISH
Power button
USB 1.1 host
+ press
:Touch screen calibration
3 ENGLISH
FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.

Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only. The FCC
requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful
interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the
5.25-5.35 GHz, 5.47-5.725 GHz and 5.725 –5.850 GHz band when associated with an access
point (AP).

The antenna(s) used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
4RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for
SAR are conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the
power output.
The highest SAR value for the device as reported to the FCC when tested for worn on the
body, as described in this user guide, is 1.07 W/kg.
While there may be differences between the SAR levels of various devices and at various
positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information
on this device is on file with the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID: TWG-SDCMSD40NBT.
This device has been tested and meets the FCC RF exposure guidelines.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2012:09:03 17:32:43+08:00
Modify Date                     : 2012:09:03 17:41:12+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:09:03 17:41:12+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:942d51f8-d625-41ff-a5fd-31a08aa18f46
Instance ID                     : uuid:c4ab2b4c-70fd-46d8-88d3-5f2b2274d8bb
Page Count                      : 4

EXIF Metadata provided by EXIF.tools