Sunitec Enterprise BC007 Bluetooth Speakerphone User Manual

Sunitec Enterprise Co., Ltd. Bluetooth Speakerphone Users Manual

Users Manual

User Manual1. About Bluetooth SpeakerphoneT2.Using the car chargerWhen the charger is connected, the LED will flash red, the Speakerphone will turn off.Normal full charge time is 3 hrs. (approx.)When charge is completed, the LED will flash off.Using solar powerDirect  the solar  panel on the  back  of the  Speakerphone toward the  sun. (Please  refer  to  the  recommended  installation  position,  as  mentioned above.)If  the  car  kit  receives  sufficient  sunlight  for  2  hours,  you  can  talk  for  a duration  of  up to  1  h.  Using  solar power  charge,  the  operation  time (the talk time and the standby time) will be extended continuously without any additional charge required by the car charger.WARNING:  Do  not  attempt  to  charge  the  hands-free  car  kit  with  any charger other than the one provided. Using another charger may damage or destroy the speakerphone.he  Bluetooth  TTS  Speakerphone  is  compatible  with  most  Bluetooth mobile  phones.  The  Text-To-Speech  system  announces  instructions  for the  users  in  5  different  languages  and  also  indicates  the  status  of  the Bluetooth  device.  It  also announces  the  name  of  the  incoming  caller  (or ,phone  number  if  the  contact  is  not  loaded  into  the  Speakerphone s phonebook). Fully portable, it is an ideal wireless communication solution for in-car or office use within a maximum range of 10 meters. Built-in with Echo  Cancellation and  Noise  Suppression, the  Bluetooth  Speakerphone provides you with impeccable sound quality in full duplex mode.Make  sure  that  your  Speakerphone  is  fully  charged before using  it.  Use only the charger provided - do not use chargers from any other devices as this might damage the device. A full charge is approximately 3 hours.Charge Your TTS SpeakerphoneConnect to a mains charger or a USB charging cable to charge.Connect to the supplied cigar lighter.123. Appearance and Function be established by pressing the Speakerphone’s “MFB” button once.Note:  Your  Speakerphone  will  be  automatically  switched  off  when  it  is disconnected from a paired device for more than 10 minutes. This special feature  is  incorporated  to  maximise  your  Speakerphone’s  standby/talk time.  To  reinstate  the  connection,  simply  repeat  the  process  for  turning Speakerphone on.9. Using  the  Speakerphone  (Most  0functions  will  be  audibly announced)(1) Making Call you can initiate calls from your mobile phone, or directly from  your  Speakerphone  using  voice  dialing  commands  (if  this feature is supported by your mobile phone)(2) Making  Calls from your mobile phone  Dial  directly  from  your mobile phone. The call is automatically connected to your Speakerphone.(3) Receiving CallsWhen  your  mobile  phone  rings,  press  the  “MFB”  button  on  the Speakerphone to connect the call.(4) Ending CallsWhen  you  have  finished  your  call,  press  the  “MFB”  button  on  the receiver to disconnect the call.(5) Rejecting CallsHold onto the “MFB” button for 3 seconds to reject an incoming call.(6) Making  calls  using  voice  dialing(Dependent  on  mobile  phone support)  Press  the  “MFB”  button  once  and  call  out  the  name  of  the person for the call to be placed.(7) Redial Last Outgoing CallPress the “MFB” button twice and the call is connected.(8) Privacy Mode In the midst of a conversation, press the “Mode” button once  and  the  speaker  volumes  are  automatically  decreased  to minimal  levels  where  you  can  use  the  Speakerphone  in  the  same mannerism as using any handheld phone.(9) Transfering CallsSpeakerphone  to  Mobile  Phone  -  During  a  call,  simply  press  both “V+”  and  “V-”  buttons  once  and  the  call  is  routed  to  your  mobile phone.Mobile  Phone  to  Speakerphone  -  Press  the  “MFB”  button  once  and blue LED light indicator comes on (“Power On” is announced).Note: Do not hold the button down for more than 8 seconds when turning the  Speakerphone  on  or  else  it  may  switch  to  its  pairing  mode.  If  this happens,  turn  off  the  Speakerphone  and  repeat  the  process  for  turning the Speakerphone on.(2) To Turn OFF the SpeakerphonePress and  hold the  “MFB”  button  until  the  LED  light indication  goes off (“Power Off” is announced).7. Pairing(1) Pairing With Bluetooth Mobile PhonePairing  is  the  process  of  connecting  your  Speakerphone  with  your mobile  phone.  Before  using  the  Speakerphone  with  your  mobile phone,  you  must  pair  both  devices.  If  you  wish  to  use  your Speakerphone  with  a different mobile  phone,  you must  reinitiate the pairing process with your intended Bluetooth mobile phone.(2) Pairing Speakerphone to Mobile Phone1. Ensure that Speakerphone is turned off, switch to pairing mode by holding  onto  the  “MFB”  button  till  both  Blue/Red  LED  lights appear  (“Pairing  phone  please  put  your  phone  in  pairing  mode and enter PIN code “0000” is announced).2. The LED lights will blink simultaneously in pairing mode.3. Turn  on  the  mobile  phone  and  place  it  within  10  meters  to  the Speakerphone.4. Initiate the mobile discovery feature on your mobile phone. Refer to your mobile phone,s user guide.5. Enter the default pin code “0000”, when prompted by your mobile phone system for pin code.6. The blue  LED  blinks  at a  regular  interval  when  both  devices  are successfully paired (“Pairing Successful” is announced).8. Connection Link/Between Speakerphone And Mobile PhoneYour  mobile  phone  will always  indicate  a  connection  icon  whenever  it  is paired  to  the  Speakerphone.  If the  icon not  present,  a  reconnection  can be established by manually selecting the Speakerphone from your mobile phone,s  Bluetooth  menu.  If  your  Speakerphone  is  set  as  an  authorised Bluetooth  device  on  your  mobile  phone,  an  automatic  reconnection  can the call is routed back to your mobile phone.(10) Adjusting The VolumeTo  inrease  the  volume  -  Press  the  “V+”  symbol  volume  button  to increase  volume  by  one  level,  repeat  this  procedure  until  you  have reached  the  desired  level.  To  decrease  the  volume  -  Press  “V-” symbol  button  to  decrease  the  volume  by  one  level,  repeat  this procedure until you have reached the desired level.(11) Text-To-Speech Language OptionsPress  the  “V+”  button  for  3  seconds  and  the  Speakerphone announces  “Select  Language”.  Repeat  the  process  to  select  the desired  language  in  the  following  order  of  English,  French,  Italian, German and Spanish.(12) Transferring Mobile Phone,s Phonebook to Speakerphonea. Using Speakerphone (For transferring the whole phonebook, and some mobile phone models may not be workable in this function.) In  the  connecting  status,  press  th  “Mode”  button  for  3  seconds and  the  Blue  LED  light  indicator  will  be  flashing  2  pulses  per second.  When  the  process  is  completed,  the  Speakerphone announces “Contacts Saved”.b. Using Mobile Phone (For transferring the contact person data one by one, and it is workable for all the mobile phone models.)1. In the connecting status, press the “Mode” button for 6 seconds to enter the phonebook function, then the Speakerphone and mobile phone will be disconnected automatically, and the Speakerphone will  be  ready  to  receive  the  phonebook  data  from  the  mobile phone, and the Blue LED light indicator will flashing every second.2. Select  the  contact  person's  data  on  the  mobile  phone's phonebook  and  transfer  it  to  the  Speakerphone  via  the  mobile phone's  Bluetooth  manual.  When  the  process  is  completed,  the Speakerphone announces “Contacts Saved”.3. If the Speakerphone has not received any contacts data from the mobile  phone  within  2 minutes  while  in  phonebook  function,  the Speakerphone  will  resume  the  speakerphone  function  and  re-connect to the previous paired device automatically.4. To resume  speakerphone function, short  press the “MFB” button, then  the  Speakerphone  will  exit  the  phonebook  function  and  re-connect with the previous paired device automatically.Note:1. The  phonebook  function  varies  from  different  mobile  phone models, and not every mobile phone supports this feature.2. The  phonebook  data  saved  in  the  Visor  Drive  will  be  erased automatically  when  it  paired  with  another  mobile  phone.  Please repeat  the  procedures  of  Phonebook  transfer  whenever connected with a new mobile phone.(13) Removing Phonebook EntriesDuring  standby  mode,  hold  on  to  both  “V+”  and  “V-”  buttons  for  3 seconds  (“Phonebook  Deleted”  is  announced)  and  the  entire phonebook memory in the Speakerphone will be deleted.(14) Turning On/Off the Text-To-Speech FunctionTo  toggle  the  TTS  function  On  or  Off,  simply  hold  the  “V-”  for  3 seconds in standby mode (“Voice Prompt On” or “Voice Prompt Off” is announced to denote its current status).10. Restore to Default SettingsTo restore your Speakerphone to its original settings, press and hold both “V+”  and  “V-”  buttons  for  10  seconds  until  the  blue  LED  light  indication flashes  rapidly.  Press and hold both  “V+”  and “V-” buttons for a further  3 seconds and the Speakerphone will power off automatically. This process is  complete  when  Speakerphone  announces  “Set  Factory  Default Complete”.11. Care and Maintenance(1) Do not expose the speakerphone to liquid, moisture or humidity, as it is not waterproof.(2) Do not use abrasive cleaning solvents to clean the speakerphone.(3) Do not expose the speakerphone to extreme temperatures.(4) Do not expose the speakerphone to contact with sharp objects as this will cause scratching and damage.(5) Do  not  attempt  to  disassemble  the  speakerphone,  as  it  does  not contain serviceable components.(6) If you do not use the speakerphone for long periods of time, be sure to  store  it  in  a  dry  place,  free  from  extreme  temperatures,  humidity and dust.12. Safety Information(1) Check local laws regarding use of a mobile phone and speakerphone while driving. If  you use the speakerphone while diving, ensure your attention and focus remains on your responsibility of driving safety.(2) Never allow children to play with the speakerphone. Small parts may be a choking hazard.(3) Observe all signs that require an electrical device or RF radio product to  be  switched  off  in  the  designated  areas.  These  could  include hospitals, blasting areas, and potentially explosive atmospheres.(4) Turn off  your speakerphone prior to boarding an aircraft.  Do  not use your speakerphone in an aircraft.(5) Never  place  or  store  the  speakerphone  over  the  area  of  the automobile's safety airbag deployment, or it may cause serious injury when a safety airbag deploys.13. Product SpecificationsBluetooth Compliance: Bluetooth 2.0+EDR specificationsOperating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM bandOutput Power: Class 2 Power Output, up to 10 metersSupport Profiles: HSP and HFP 1.5TTS Support Language: English, French, Italian, German, SpanishSupport Multiple paired Device: Up to 8 Bluetooth Phone can be pairedStand-by Time: Up to 450 hourTalk time: Up to 11-13 hoursBattery Charging Time: About 3 hoursCharger Voltage: DC5.0V 400mABattery Type: 550mA, (Rechargeable Lithium-ion Battery)34567(1) Speaker (6) MFB Button (Multi-Function Button)(2) Microphone (7) Volume Increase (V+)(3) LED (8) Volume Decrease (V-)(4) Charging Socket (5-pin USB) (9) Solar Visor(5) Mode Button (Privacy) (10) Windows Mount"SOLAR VISOR"text to speecHSPEAKERPHONE(10)(1)(2)(3)(6)(8)(7)(5)(4)(9)WARINIG:Install  the  Speakerphone  out  of  the  way  of  any  Air  Bags  for safety reason.6. Powering Up(1) To turn ON the SpeakerphonePress  and  hold  the  “MFB”  button  for  four  seconds  and  the  flashing 1 2 3 4 54. Recommend Installation PositionIt is recommended that the Speakerphone be positioned and installed on the windshield in front of the driver's seat, as shown in the picture below:
14.Changes or modifications not expressly   approved by the party responsible for   compliance could void the user’s authority   to operate the equipment.”         15:About Battery Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions.  16: Other information Bluetooth Speakphone Product  name:BC900 Manufacturer: Sunitec                 No.2, Qilin Road  2, Run Tang Ind, Dan-Keng Village Fu Min Community, Guan-Lan Town, Bao An District, Shenzhen Guangdong China Lithium Battery Manufacturer: szjingyou Voltage  : 3.7V Current  : 550mAh Model   :JY-M688  This device complies with Part 15 of the FCC Rules.   Operation is subject to the following two conditions:   (1) this device may not cause harmful interference   (2) this device must accept any interference received,   including interference that may cause undesired   operation. To comply with FCC RF exposure requirements, the device   and the antenna for this device must be installed to ensure   a minimum separation distance of 20 cm or more from a person's   body. Other operating configurations should be avoided.

Navigation menu