Sunitec Enterprise BH003 Bluetooth Mono Headset User Manual UM BH805 PATRIONICS EN 120402
Sunitec Enterprise Co., Ltd. Bluetooth Mono Headset UM BH805 PATRIONICS EN 120402
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1692680 |
| Application ID | 0EMcOS9SAFXbrBbFFTrpiw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 179.73kB (2246686 bits) |
| Date Submitted | 2012-05-08 00:00:00 |
| Date Available | 2012-05-08 00:00:00 |
| Creation Date | 2012-04-09 16:55:33 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2012-04-20 09:58:48 |
| Document Title | UM-BH805-PATRIONICS-EN-120402 |
| Document Creator | Adobe Illustrator CS4 |
CRC#: 5278691 Multipoint Bluetooth Mono Headset Instruction Manual 4. Charging Your Bluetooth Headset The Bluetooth Headset comes with a built-in rechargeable battery. Prior to using the headset, it is recommended to charge the battery fully for the first time. Normal full charge time is 2 hrs. (approx.) IMPORTANT: (1) Charging indication will be delayed for a few minutes if the headset has not been used for a long period time or the battery is drained. (2) To prolong durability of battery, it is recommended to charge the headset whenever a low battery signal is encountered. When battery becomes low, the LED will flash red every 3 seconds. Under a low battery condition, if headset is continuously used, it will decrease the durability of battery as well as the standby time. This causes a longer charge time than the normal 2 hours and the headset will power off. (3) The red LED will flash on while charging, and will turn off when charging is completed. 5. Turning ON/OFF the Headset POWER ON: When the headset is under off mode, press and hold the “MFB” for 3 seconds until you hear a short beep. The red LED will flash 3 times, and then the headset will automatically connect the last connected mobile phone. POWER OFF: When headset is in standby mode, press and hold the “MFB” button for 3 seconds until you hear a short beep. The red LED will flash 3 times before power off. 6. Pairing Before using this product, read this manual carefully and retain it for future reference. 1. About Bluetooth Technology Bluetooth wireless technology is set to revolutionize the personal connectivity by providing freedom from wired connections-enabling links and connectivity between notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enabled devices within10 meters. Utilizing global sound & digital data 2.4GHz ISM transmission, it makes global communication in the way you’ve never dreamed of! 2. Getting to Know Your Bluetooth Headset To use your Bluetooth Headset, please follow these simple steps: (1) Charge your Headset. Prior to using the Headset, it is recommended to charge the battery fully for the first time. Normal full charge time is 2 hrs. (approx.) (2) Place your Headset and a Bluetooth-enabled mobile phone within 1 meter for pairing. (3) Ensure your Headset and mobile phone is placed within 10 meters Bluetooth sensing distance. (Obstruction could cause shorter sensing distance.) 3. Appearance and Function (1) Speaker (2) Microphone (3) Charging Socket (4) Multi-Function Button (MFB) (5) Volume Increase (V+) (6) Volume Decrease (V-) Prior to using the headset for the first time, you must pair it with a Bluetoothenabled mobile phone. The steps below describe pairing instructions for a typical Bluetooth-enabled mobile phone. (1) Place the headset and mobile phone no more than 1 meter apart. (2) Ensure the headset is in OFF mode. (3) Press and hold the “MFB” button for 6 seconds until the red LED flashes on. It is now ready for pairing. (4) Activate the Bluetooth function on your mobile phone. (Refer to your mobile phone owner’s manual). (5) Select : ”BT Headset” from the list. (6) Enter the pre-programmed code “0000” and press “OK” to pair the headset and the phone. When pairing is completed, the headset is now in standby mode with the red LED flashing every 3 seconds. 11. Low Voltage Protection of Battery (6) When the voltage of the battery is decreased to 3.3 V, the red LED will flash every 3 seconds, and the headset will be powered off automatically when the voltage is less than 3.0 V. LAST NUMBER RE-DIALING In standby mode, press the “MFB” button twice for last number redial. ADJ USTING THE VOLUME During a call, press the “V+” or “V-” buttons repeatedly until you reach the desired volume level. (7) MUTE & UN-MUTE a. Mute: During a call, press and hold the “V-” button for 3 seconds to mute the headset. The red LED will flash on during mute mode. Un-Mute: press and hold the “V-” button 3 seconds to un-mute b. the headset. (8) TRAN SFERRING CALL S a. Headset to Mobile Phone: During a call, press and hold the “V+” button for 3 seconds. The call is routed to your mobile phone. b. Mobile Phone to Headset: Press and hold the “V+” button for 3 seconds to route the call to the headset. (9) HOLD THE CALL During a call, press the “MFB” button twice to hold the phone call. Press “MFB” button twice again to resume conversation. (10) Answer the Second Call a. When receiving a second call, press “MFB” button twice to hold the first call on line and answer the second call. b. When receiving a second call, press “MFB” button once to end the first call and answer the second call. (11) Reject the Second Call When receiving a second call, press and hold the “MFB” button for 2 seconds to reject the second call. (12) Switch Between 2 Phone Calls a. When having 2 calls on the line, press “MFB” button twice to switch between these 2 phone calls. b. When having 2 calls on the line, press “MFB” button once to end the first call and stay with the second call. 10. (1) MultiPoint Feature Activate Multipoint Connection The default setting of headset’s multipoint function is on. Please activate the multipoint function for connecting with 2 mobile phones in the same time. a. MULTIPOINT ON: In standby mode, press and hold “V+” button for 6 seconds until you hear a beep. After turning on the multipoint function, the headset will automatically connect to the last 2 mobile phones that have been paired before. (7) 7. Press “Return” to go back to your mobile phone’s main menu. Place the mobile phone and headset within 10 meters for recommended sensing distance. NOTE : If the pairing is not completed within 2 minutes after pairing mode is activated, the headset will power off automatically. You will have to repair the headset using the steps above. Connection/Link between Headset and Mobile Phone After pairing is completed, headset will remain in standby mode. Before placeing or answering a call, if the headset icon is not shown on phone screen, follow the steps below to activate the Bluetooth connection/link through the mobile phone or headset until the headset icon is on the screen. (1) ON PHONE : Select the ”BT Headset” from the paired list on your phone screen. (2) ON HEA DSET: Press “MFB” and select “Accept” on phone screen to form the connection. 8. (1) (2) (3) (4) b. (2) (3) Disconnection between Headset and Mobile Phone When you need to connect your headset with another Bluetooth-enabled mobile phone. Follow the steps below to disconnect the headset from the the pre-paired mobile phone. (1) Power off the headset. (2) Select “Disconnect” on the Bluetooth device list of your mobile phone to remove the connection. NOTE : When losing the connection/link, the headset will automatically turn off in 10 minutes. The red LED will flash twice every 3 seconds when the headset is not connected to mobile phone. ANSWERING CALL When receiving a phone call, press the “MFB” button to answer the call. ENDING CALL Press the “MFB” button to end a call. REJECT CALL When you hear the ringing tone, press and hold the “MFB” button for 3 seconds to reject the call. VOICE DIAL If your mobile phone is voice dialing enabled, in standby mode, press the “MFB” button and say the voice tag after you hear a beep. NOTE : Please make sure to record voice tag into the mobile phone before using voice dial function. Functionality varies depending on the mobile phone models. (Refer to your mobile phone owner’s manual.) -03- 12. Restore to Default Setting Follow the steps below to reset the headset to its original setting and remove all previous pairings and connections. (1). Ensure the headset is under standby mode. (2). Press and hold both of “V+” and “V-” buttons for 10 seconds until the red LED flashes 5 times, then the headset will resume in standby mode. The headset is now back to its original setting. After powering on the headset again, it will enter pairing mode automatically. NOTE S: If the headset is connected with a mobile phone before restoring to original default setting, it will enter pairing mode automatically after restored to default. If the headset is not connected to the mobile phone before restoring to original default setting, it will be in standby mode after restored to default setting. 13. LED Indication Headset Status Power Off Mode Power On Power Off Standby Mode Standby-Low Voltage Talk in progress Mute Pairing in progress Standby (Disconnect Bluetooth device) Charging in progress Charging completed -04- -02- 9. Using the Headset -01- (5) (4) MULTIPOINT OFF: In standby mode, press and hold “V-” button for 6 seconds until you hear a beep. The headset will turn off the multipoint function and power off automatically. When powering on the headset again, it will only connect to the last connected Bluetooth device. Multipoint Pairing a. FIR ST MOBILE PHONE : Pair the headset with one of the Bluetooth-enabled mobile phones. b. SECON D MOBILE PHONE : Power off the headset. Press and hold the “MFB” button for 6 seconds to enter pairing mode again to pair and connect with the second mobile phone. c. Connect with the first paired mobile phone to the headset. Multipoint Connection/Link with 2 Mobile Phones After the multipoint function is activated, please follow the steps below to connect with 2 Bluetooth enabled mobile phones at the same time. a. When power is on the headset, it will automatically search and connect the last 2 mobile phones that have been connected before. b. In standby mode, press and hold “V+” button for 6 seconds until you hear a beep, then the headset will automatically connect the last 2 mobile phones that have been connected before. LED Indication Red LED Off Red LED flashes 3 times rapidly Red LED flashes 3 times rapidly Red LED flashes once every 3 seconds Red LED flashes once every 0.5 seconds Red LED flashes once every 6 seconds Red LED steady on Red LED steady on Red LED flashes twice every 3 seconds Red LED steady on Red LED off -06- 14. Product Specifications Bluetooth Compliance: Operating Frequency Band: Output Power: Support Profiles: Support Multiple Paired Device: Stand-by Time: Talk Time: Battery Charging Time: Charger Voltage: Battery: Bluetooth V2.1 + EDR 2.4 GHz ~ 2.48 GHz unlicensed ISM band Class 2, up to 10 meters HSP and HFP1.5 profiles Memorize paired data of 8 Bluetooth phones (Only 2 connections at any time) Up to 200 hours Up to 8 hours About 2 hours DC5.0V, 300mA 85 mAH, (Rechargeable Lithium-ion battery) Using the Secondary Mobile Phone through Headset When connected with 2 Bluetooth mobile phones, the first connected one is primary phone that can use “MFB” button for voice dial and redial. The second connected phone is the secondary phone that will use “V+” button for voice dialing and redialing. a. VOICE DIAL : Press “V+” button once to activate the secondary phone’s voice dialing function. b. RE-DIALING : Press “V+” button twice to redial the last outgoing number of secondary phone. NOTE : 1. When the headset is in Multipoint off mode and connected with only one mobile phone, it can also enter voice dial function by pressing the “V+” button once, or make last outgoing number re-dialing by pressing “V+” button twice. -05- Manufactured for your Military Exchanges ©2012 Exchange P.O.BOX 660202 Dallas, TX 75266-0202 www.shopmyexchange.com Printed in China -07- Please also inform the grantee, that the regulatory text as shown in the manual provided, is not good. The correct content must be as given below. It is important that they correct this before placing the product on the US and Canadian market. FCC Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on another circuit. ‐ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : UM-BH805-PATRIONICS-EN-120402 Metadata Date : 2012:04:20 09:58:48+08:00 Modify Date : 2012:04:20 09:58:48+08:00 Create Date : 2012:04:09 16:55:33+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 116 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7085 bytes, use -b option to extract) Instance ID : uuid:1d46c11a-479d-4bb1-a75f-65cdeb8b4fef Document ID : xmp.did:EB6D925B1C82E111919797F58FD386E6 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:da1feb10-7757-4464-94da-2d665c990d4a Derived From Document ID : xmp.did:C140C1753A7DE111B0B8BD12B21BCB03 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved History Instance ID : xmp.iid:DCC7B400EB7CE111B7D3DA073F504AFF, xmp.iid:C140C1753A7DE111B0B8BD12B21BCB03, xmp.iid:EB6D925B1C82E111919797F58FD386E6 History When : 2012:04:03 01:40:56+08:00, 2012:04:03 11:09:43+08:00, 2012:04:09 16:55:35+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : E:\design\sophie\UM\BH805.jpg Manifest Reference Instance ID : uuid:aefcce2c-8224-11e1-9437-d3ac58b23e82 Manifest Reference Document ID : adobe:docid:photoshop:aefcce2b-8224-11e1-9437-d3ac58b23e82 Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 296.999959 Max Page Size H : 210.001652 Max Page Size Unit : Millimeters Font Name : Arial-ItalicMT, Arial-Black, Arial-BoldMT, Arial-BoldItalicMT, ArialMT, Tahoma-Bold, MyriadPro-Regular, SimSun, Myriad-Italic, Myriad-BoldItalic, Myriad-Bold, Myriad-Roman Font Family : Arial, Arial, Arial, Arial, Arial, Tahoma, Myriad Pro, 宋体, Myriad Italic, Myriad BoldItalic, Myriad Bold, Myriad Roman Font Face : Italic, Black, Bold, Bold Italic, Regular, Bold, Regular, Regular, Italic, BoldItalic, Bold, Roman Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Unknown, Unknown, Unknown, Unknown Font Version : Version 2.90, Version 2.40, Version 3.00, Version 2.90, Version 3.00, Version 3.15, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 3.12, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : ARIALI.TTF, ariblk.TTF, ARIALBD.TTF, ARIALBI.TTF, ARIAL.TTF, tahomabd.TTF, MyriadPro-Regular.otf, simsun.ttc, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE Yellow 012 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 4.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 0.000000, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000 Producer : Adobe PDF library 9.00 Has XFA : No Page Count : 2 Creator : Adobe Illustrator(R) 14.0 For : Administrator, Bounding Box : -124 -2015 719 -122 Container Version : 11 Creator Version : 14EXIF Metadata provided by EXIF.tools