Sunitec Enterprise BM64C1 Bluetooth module User Manual SPEC BM64C1

Download:
Mirror Download [FCC.gov]
Document ID	3486142
Application ID	hpoKksQvOOGyJJz3K6n1WQ==
Document Description	User manual part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	198.75kB (2484321 bits)
Date Submitted	2017-07-28 00:00:00
Date Available	2017-07-28 00:00:00
Creation Date	2017-07-28 17:20:46
Document Lastmod	2017-07-28 17:20:54
Document Title	~$SPEC-BM64C1
Document Creator	Doro PDF Writer [1.92] [http://j.mp/the_sz]

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’
s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursua
nt to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte
rference in a residential installation. This equipment generates uses and can radiate radio frequency energy a
nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio com
munications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turn
ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Reorient or relocate the receiving antenna.
- Reorient or relocate the receiving antenna.
-Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/Canada.
This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2. The transmitter module may not be co-located with any other transmitter or antenna,
Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with
another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used
on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
Any company of the host device which install this modular with limit modular approval should perform the test
of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if
the test result comply with FCC part 15.247 and 15.209 requirement, then the host can be sold legally.
End Product Labeling
If the FCC identification number is not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID:
2AMX3BM64C1.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
The modular is not intended to be fielded serviceable as without shielding, host manufacturer must be
considered shielding when integrating a module.
When the module is installed inside another device, the user manual of this device must contain below warning
statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. The devices must be installed and used in strict
accordance with the manufacturer's instructions as described in the user documentation that comes
with the product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:07:28 17:20:46+08:00
Creator                         : Doro PDF Writer [1.92] [http://j.mp/the_sz]
Modify Date                     : 2017:07:28 17:20:54+08:00
Subject                         : ~$SPEC-BM64C1
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:07:28 17:20:54+08:00
Creator Tool                    : Doro PDF Writer [1.92] [http://j.mp/the_sz]
Format                          : application/pdf
Title                           : ~$SPEC-BM64C1
Description                     : ~$SPEC-BM64C1
Document ID                     : uuid:0f803d30-fbcd-4bdb-a935-b532d33e56c3
Instance ID                     : uuid:9ab9a0e5-3cb8-4cc4-83af-80ca0a5a922f
Page Count                      : 14

EXIF Metadata provided by EXIF.tools