Sunitec Enterprise BS003 Bluetooth Stereo Headset User Manual UM BS852 PATRIONICS EN 120412mod

Download:
Mirror Download [FCC.gov]
Document ID	1692739
Application ID	KYo74aF1sg62IOYS5zhIEA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	178.52kB (2231548 bits)
Date Submitted	2012-05-08 00:00:00
Date Available	2012-05-08 00:00:00
Creation Date	2012-04-12 18:35:02
Producing Software	Adobe PDF library 9.00
Document Lastmod	2012-04-20 09:59:04
Document Title	UM-BS852-PATRIONICS-EN-120412mod
Document Creator	Adobe Illustrator CS4

CRC#: 5279194
4. Charging Your Bluetooth Stereo Headset
Make sure that your Stereo Headset is fully charged before using it. Use only the
charger provided, do not use chargers from any other devices as it might damage
the device. A full charge is approximately 3 hours.
5. To Charge Your Bluetooth Headset
1. Use the charger to charge from a charging outlet (or from your laptop/PC's USB
port if the optional USB Charging Cable is provided).
2. When an LED light indication is red, the headset is charging.
3. The LED light indication goes off when the device is fully charged.
4. Low voltage testing of battery: When the voltage of the battery goes down to
3.3v, the red LED will flash instead of blue LED; when the voltage goes down to
3.0v, the headset will power off automatically.
Instruction Manual
6. Powering Up
To turn ON the Bluetooth Stereo Headset
Press and hold the “MFB” button for 3 seconds and the flashing Blue LED light
indicator comes on.
Note:
Do not hold the button down for more than 6 seconds when turning the headset
on or else it may switch to pairing mode. If this happens, turn off the headset and
repeat the process for turning the headset on.
To turn OFF the Bluetooth Stereo Headset
Press and hold the “MFB” button until the red LED light indication goes off.
7. Pairing Bluetooth Stereo Headset to Mobile Phone
Pairing is the process of connecting your headset with your mobile phone. Before
using the headset with your mobile phone, you must pair both devices. If you wish
to use your headset with a different mobile phone, you must reinstate the pairing
process with your intended Bluetooth mobile phone.
1. Switch to pairing mode by holding onto the “MFB” button (approximately 6
seconds) till both Blue/Red LED lights appear.
2. The LED lights will blink simultaneously in pairing mode.
3. Turn on the mobile phone and place it within 1 meter to the headset.
4. Activate the Bluetooth function on your mobile phone and search fro accessible
Bluetooth device by referring to your mobile phone user guide for details.
5. Select “BT Headset” from the list.
Before using this product, read this manual carefully and retain it
for future reference.
1. Introduction
The Bluetooth Stereo works with all Bluetooth enabled compatible phone or music
device that supports Advanced Audio Distribution Profile (A2DP) and Audio Video
Remote Control Profile (AVRCP). Listening to music, answering calls, adjusting
volume, and track controls are easily accessible on the buttons of the headset - the
ideal solution for integrating wireless mobile music and calls.
2. Diagram
MFB: Multi-Function
Button (on/off/answer)
3.5mm Stereo
Headset Jack
Forward
Backward
Mini USB
Charging Point
Microphone
Volume Up
LED Light
Indicator
Volume Down
3. Wearing Your Headset
BS852
-02-
6. Enter the pre-programmed code “0000” and press “OK” to pair the headset
and the phone. When pairing is completed, the blue and red LED stop flashing,
the headset is under the standby mode with the blue LED flashes in every 4
seconds.
7. Press “Return” to go back to your mobile phone’s main menu. Please place the
mobile phone and the headset within 10 meters sensing distance. You should
now be able to make and receive calls using your headset.
Note: If the pairing cannot be completed within 2 minutes after the pairing mode
is activated, the headset will power off automatically. Please repeat steps above to
pair the headset and mobile phone again.
8. Connection/Link between Headset and Mobile Phone
After pairing is completed, headset is always under standby mode. Before you place
or answer a call, if the headset icon is not shown on phone screen, please follow the
steps below to activate the Bluetooth connection/link through your mobile phone or
headset until the headset icon is on the screen.
(1) On phone: Select the “BT Headset” from the paired list on your phone screen.
(2) On headset: Short press “MFB” and select “Accept” on phone screen to accept
connection.
9. Disconnection between Headset and Mobile Phone
When you need to connect your headset with another Bluetooth-enabled mobile
phone, please follow the steps below to disconnect the headset with the pre-paired
mobile phone.
(1) Power off the Headset.
(2) Select “Disconnecting” on the Bluetooth device list of your mobile phone to
remove the connection.
Note: When losing the connection/link, the headset will be automatically power off
in 10 minutes.
10. Using the Headset
(1) Answering Call
When receiving a phone call, press the “MFB” button to answer the call.
(2) Ending Call
Press the “MFB” button to end a call.
(3) Reject Call
When you hear the ringing tone, press and hold the “MFB” button for 3 seconds
to reject the call.
-01-
-03-
(4) Voice Dial
If your mobile phone is voice dialing enabled, under standby mode, press and
hold the “V+” or “V-” button for 3 seconds and say the voice tag after you hear
a beep.
Note: Please make sure to record voice tag into the mobile phone before using voice
dial function. Functionality varies depending on the mobile phone models. Please
refer to your mobile phone user guide for details.
(5) Last Number Re-Dialing
Under standby mode, short press the “MFB” button twice for last number redial.
(6) Adjusting the Volume
During a call, press the “V+” or “V-” buttons repeatedly until you reach the
desired volume level.
(7) Mute & Un-Mute
Mute: During talking via the headset, press “V+” or “V-” for 6 seconds until the
headset emit a short beep.
Un-Mute: Press “V+” or “V-” for 6 seconds until the headset emits a short beep.
(8) Transferring Calls
a. Headset to Mobile Phone: During a call, press and hold the “MFB” button for
3 seconds, and the call is routed to your mobile phone.
b. Mobile Phone to Headset: Press the “MFB” button f o r 3 s e c o n d s to
route the call to headset.
(9) Hold the Call
During a call, press “V+” or “V-” for 3 seconds to hold the phone call. Press “V+”
or “V-” for 3 seconds button again to resume conversation.
(10) Answer the Second Call
a. During conversation in progress, press “V+” or “V-” for 3 seconds to pick up
the second call.
b. When having 2 calls on the line, press “MFB” button once to end the first call
and stay with the second call.
(11) Switch between 2 Phone Calls
During two calls in progress, press “V+” or “V-” for 3 seconds to swap calls.
(12) Restore to Factory Default Setting
To restore your headset to its factory default setting, press and hold “>>|”
button for 8 seconds until both blue/red lights appear, then press the “MFB” for
3 seconds power off the headset to complete the setting.
-04-
11. Listening to Stereo Audio from Bluetooth A2DP Enabled Mobile
Phones/Audio Devices
Your Bluetooth Stereo Headset is capable of high fidelity stereo playback on A2DP
enabled Mobile Phones/Audio Devices. Please refer to your Mobile Phone/Audio
Device User Guide for more information.
Start Audio Playback
Ensure that your headset is connected with Advanced Audio profile. Press “MFB”
button once to play. To pause, simply press “MFB” button once.
Forward/Backward Track
Toggle between the “|<<” and “>>|” button - until you have reached the desired
track.
Answering a Call When Playing Music
Press the “MFB” button and the call will be connected. Audio playback is put on
mute when there are incoming calls from the active connection. The audio playback
resumes as soon as the call is terminated. (Dependent on your device supporting
this feature).
7. Do not attempt to disassemble the headset, as it does not contain serviceable
components.
15. Safety Information
1. Check local laws regarding use of a mobile handset and headset while driving.
If you use the headset while diving, ensure your attention and focus remains on
your responsibility of driving safety.
2. Never allow children to play with the headset. Small parts may be a choking
hazard.
3. Observe all signs that require an electrical device or RF radio product to be
switched off in the designated areas. These could include hospitals, blasting
areas, and potentially explosive atmospheres.
4. Turn off your headset prior to boarding an aircraft. Do not use your headset in
an aircraft.
5. Never mount or store your headset over any air bag deployment area serious
injury may result when an air bag deploys.
6. Do not open or mutilate the built-in battery.
16. LED Indication
Headset Status
Power Off Mode
LED Indication
LED Off
Power On
Blue LED steady on 1 Second
Power Off
Red LED steady on 1 Second
Standby Mode
Blue LED flash once every 5 second
Standby (Disconnect Bluetooth device)
Blue LED flash twice every 2 seconds
Standby-Low Voltage
Red LED will flash instead of blue LED
Talk in progress
Blue LED flash twice every 15 seconds
Mute
Blue LED flash twice every 15 seconds
Pairing in progress
Red and blue alternatively
Charging in progress
Red LED steady on
Charging completed
LED off
-06-
17. Product Specifications
Bluetooth compliance: Bluetooth V2.1+EDR
Supports profiles: HSP, HFP, A2DP and AVRCP Profiles
Output power: Class 2
Operating range: Up to 10m
Operating frequency: 2.402GHz~2.480GHz
Support multiple paired Device: Up to 8 Bluetooth devices can be paired
Charger type: 5.0V~5.5V (type 300mA)
Charging time: 3 hours
Standby time: Up to 260 hours
Talk time/Play time: Up to 8 hours
Audio streaming format: SBC Max 200kbps, 48.000kHz
Audio frequency range: 20Hz-20,000Hz.
Battery: 170 mAH, (Rechargeable Lithium-ion battery)
12. Adjusting the Volume
Press the “V+” button to increase volume or press the “V-” button to decrease the
volume. Repeat this procedure until you have reached the desired level.
13. Connection Link/Between Bluetooth Stereo Headset and Mobile Phone
Your mobile phone will always indicate a headset icon whenever your headset is
paired. If the icon is not present, a reconnection can be established by manually
selecting the headset from your mobile phone's Bluetooth menu. If your headset
is set as an authorized Bluetooth device on your mobile phone, an automatic
reconnection can be established by pressing the headset's “MFB” button once.
14. Care and Maintenance
1. Consider turning your headset off before placing it in your pocket or bag. If the “MFB”
is accidentally depressed, your mobile handset may place an unintended call.
2. Do not expose the headset to liquid, moisture or humidity, as it is not
waterproof.
3. Do not use abrasive cleaning solvents to clean the headset.
4. Do not place the headset in high temperature, as it will result in an explosion.
5. Do not expose the headset to contact with sharp objects as this will cause
scratching and damage.
6. Do not stick anything inside the headset as this may damage internal
components.
-05-
Manufactured for your Military Exchanges
©2012 Exchange
P.O.BOX 660202
Dallas, TX 75266-0202
www.shopmyexchange.com
Printed in China
-07-
Please also inform the grantee, that the regulatory text as shown in the manual
provided, is not good.
The correct content must be as given below.
It is important that they correct this before placing the product on the US and
Canadian market.
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the radio or television off
and on, the user is encouraged to try to correct interference by one or more of the
following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on another circuit.
‐ Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for
compliance could void the user's authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : UM-BS852-PATRIONICS-EN-120412mod
Metadata Date                   : 2012:04:20 09:59:04+08:00
Modify Date                     : 2012:04:20 09:59:04+08:00
Create Date                     : 2012:04:12 18:35:02+08:00
Creator Tool                    : Adobe Illustrator CS4
Thumbnail Width                 : 120
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7434 bytes, use -b option to extract)
Instance ID                     : uuid:1fb772f9-ab86-4d1a-a362-361e51fb311d
Document ID                     : xmp.did:184F169A8284E111AD20A8EC4456500E
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:0ad0ef50-d8f1-4645-a12c-b5aa4d887d73
Derived From Document ID        : xmp.did:ED6D925B1C82E111919797F58FD386E6
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:DCC7B400EB7CE111B7D3DA073F504AFF, xmp.iid:C140C1753A7DE111B0B8BD12B21BCB03, xmp.iid:C240C1753A7DE111B0B8BD12B21BCB03, xmp.iid:C340C1753A7DE111B0B8BD12B21BCB03, xmp.iid:ED6D925B1C82E111919797F58FD386E6, xmp.iid:184F169A8284E111AD20A8EC4456500E
History When                    : 2012:04:03 01:40:56+08:00, 2012:04:03 11:09:43+08:00, 2012:04:03 11:11:56+08:00, 2012:04:03 11:59:23+08:00, 2012:04:09 17:35:41+08:00, 2012:04:12 18:34:57+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4
History Changed                 : /, /, /, /, /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 296.999959
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Font Name                       : Arial-ItalicMT, Arial-Black, Arial-BoldItalicMT, ArialMT, Tahoma-Bold, Tahoma, SimSun, Myriad-Roman
Font Family                     : Arial, Arial, Arial, Arial, Tahoma, Tahoma, 宋体, Myriad Roman
Font Face                       : Italic, Black, Bold Italic, Regular, Bold, Regular, Regular, Roman
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Unknown
Font Version                    : Version 2.90, Version 2.40, Version 2.90, Version 3.00, Version 3.15, Version 3.15, Version 3.12, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : ARIALI.TTF, ariblk.TTF, ARIALBI.TTF, ARIAL.TTF, tahomabd.TTF, TAHOMA.TTF, simsun.ttc, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Producer                        : Adobe PDF library 9.00
Has XFA                         : No
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 14.0
For                             : Administrator,
Bounding Box                    : 0 -1202 842 596
Container Version               : 11
Creator Version                 : 14

EXIF Metadata provided by EXIF.tools