Sunmi Technology T2LITE POS system User Manual 08 T2 LITE UM FCC 1010

Download:
Mirror Download [FCC.gov]
Document ID	4033538
Application ID	b/h6sw6on82Mb51xrdJIMA==
Document Description	08 T2 LITE UM FCC 1010
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.95kB (1799360 bits)
Date Submitted	2018-10-12 00:00:00
Date Available	2018-10-12 00:00:00
Creation Date	2018-09-06 11:51:43
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-10-10 14:21:39
Document Title	T2 LITE中性英文版版用户指南_20180905
Document Creator	Adobe Illustrator CC 2017 (Macintosh)

T2 LITE
POS User Manual Book
This Manual Book shall be read carefully before use and remained in safe hands.
Quick Installation Guide
“Take main screen as sample”
Three options for sub screen of intelligent POS machine
15.6〃main screen only
（T3521）
15.6〃main screen+10.1〃
consumer screen
（T3522）
1. Rotate the display to a horizontal state
2. Open the line hide cover
3. Connect the power interface of the adapter
to the power port at the bottom of the
mainframe. And insert the other side of the
adapter to electric supply sockets
4. Press the power button for
two seconds to turn on.
15.6〃main screen+15.6〃
consumer screen
（T3523）
Product Introduction
“Take main screen as sample”
Card slot cover
15.6”
Slot reader interface
Display
USB interface
Power, Pilot Light
5V
TXD
RXD
GND
Interface cover
TF card slot
Debug key
Micro USB debug port
Line hide cover
Metal Base
USB
interface
Headset
jack
USB
interface
Serial
interface
Cashbox
interface
LAN
interface
Power
port
Power
USB Interface
Slot reader interface
Micro USB debug port, debug key
In the state of power off, a short press turns on the
computer.
For external keyboard, mouse and USB drive.
For external MSR/RFID POS
For facilitydebugging.
Display
Card slot is an optional part which may not
becontained according to configuration.
Cashbox Interface
In the state of normal use, press on the power button
for two or three seconds to choose power off or restart.
For the touch screen used by the operator.
In the state of system halted, press on the power
button for 11 seconds for power off.
Metal Base
Pilot Light
For supporting the display when put on the
desktop.
Blue light on when the power is on.
Light off when the power is off.
Able to be replaced with the VESA suspension
bracket.
TF card slot
For external TF card.
For external cashbox with 120ms electric pulse
output. No continuous power supply.
This facility only supports 24V/1A cashbox. There
may exist hidden troubles that will burn the circuit
of the cashbox in case of 12V cashbox.
Installation Steps for the VESA Bracket
“Limited main screen only”
Remove the base
Remove the base
Remove the base
Install VESA accessories
1. Put the display flat on the desktop
with its face down.
4. Rotate the metal base to a horizonal state.
6. Unscrew the four M4 screws with a
screwdriver and complete the removal
of base.
1. Put the VESA bracket aligning to four screw holes
according to required direction.
2. Rotate the metal base to a vertical state.
3. Remove the lower cover of the bracket.
5. Remove the upper cover of the bracket.
2. Use the four M4 screws removed from the base
to fix the VESA bracket.
3. Install the bracket on the wall or desk
in accordance with VESA bracket manual book
and complete the installation of VESA suspension
bracket.
Note: This machine only supports the installation for VESA
MIS-D (100×100mm) suspension bracket. The VESA
bracket is an optional accessory which needs to be
purchased by the user.
Minimal Settings
Only a few steps to turn on the intelligent business equipment.
Operating system
Android 7.1
Processor
Qualcomm snapdragon Qcta-core processor
Display resolution
15.6’’ resolution HD 1920 x 1080
Press the power button and the screen lights on. Enter the first start-up screen
and operate according to the prompt. Two modes of Internet access are available.
Storage
16GB ROM + 2GB RAM
Wi-Fi setting.
Touch screen
Multi-touch capacitive display
· Press [Setting] and start WLAN. Enter the searching interface of WLAN, waiting for WLAN
network available;
Wi-Fi
Support 802.11b/g/n 2.4GHz
Bluetooth
Support Bluetooth 3.0/4.0 and iBeacon
Loudspeaker
Single 1.2W voice reaches 90db
External interface
5 x USB Type A interfaces, 1x RJ11 serial interface,
1 x RJ12 24V cashbox interface, 1x RJ45 LAN interface,
1 x headset jack, 1x power port, 1x Micro-USB debug interface
External storage card
MicroSD (TF), 64G maximum
VESA(limited main screen only)
In accordance with VESA MIS-D 100×100mm Standard
Item dimension
H 35cm × W 38cm × T 17cm
AC adapter
Model:CYZS36-240150
Input:AC 100~240V,50/60Hz,1.5A
· Click on the WLAN to be connected. A password is required for access if an encrypted
network is chosen.
Basic Parameters for POS Machine
Setting of LAN
How to download/use the application
This POS machine is suitable for cashier environment of business customers of different industries
including Chinese and Western foodservice industry, exclusive department store, convenience store,
the banking service industry, consulting station, interactive multimedia and advertisement broadcast
system, etc. Relevant apps can be scanned, downloaded and installed in the application store with
access to the internet.
Output:DC 24V,1.5A
Specification of 15.6” customer display
Please read the built-in Help APP for more help.
Display resolution
15.6’’ resolution HD 1920 x 1080
Touch screen
Multi-touch capacitive display
Specification of 10.1” customer display
Display resolution
10.1’’ resolution HD 1024 x 600
Configurations and parameters listed in this page are indicative and actual products on the market shall prevail.
Precautions
Warning
Important Safety Instructions
· Please insert the AC plug into the AC outlet according
to the identifying input on the power adapter;
· Avoid installing or using during thunder
and lightning,other wise lightning stroke
may occur;
· It is prohibited to use the device in any places with
potential explosive gases;
· Nonprofessionals shall not open the power adapter
anyhow so as to avoid dangers;
· Cut off the power immediately if there
is abnormal smell, overheating or smog!
· The device is a Grade A product. In living environment,
the product may cause radio interference. Therefore,
users may be required to take practical measures
against the interference.
Statement
· About the battery replacement:
1. It may cause explosion with wrong type battery
2. Old battery which is replaced should be handled
by repair man, do not put it in fire!
· Damages caused by using and maintaiing
the device without following the User Guide;
The company is not responsible for the
following behaviors:
· This product can be used across EU member states.
· Damages or problems caused by selection
of objects or Consumables (products
which are not the initial ones provided or
recognized by the company).
In this case, the company will not undertake
any responsibility.
· No one is entitled to modify or change
the product unless permitted by the
company.
Recommendation
Disclaimer
· Do not use the device near water or in humid
environment.Keep liquid from falling onto the
terminal;
Discrepancies between the product and
the file concerning details may raise due to
product updates. Please be subject to the
material object. The company reserves the
right to interpret the file and the right to
revise this manual without prior notices.
· Adapter shall be installed near the equipment and
shall be easily accessible.
· The operating temperature of the device between
0℃ to 45℃.
· The device complies with RF specifications when
the device used at 20cm form your body.
· Do not use the device in extremely cold and hot
environment, e.g. around fire or lighted cigarettes;
· Do not smash, throw or bend the device;
· Use the device in clean and dustfree environment
as much as possible and keep small items from
falling into the terminal;
· Do not use it near medical devices unless permitted.
Please make sure the temperature for
adapter will be from -10 ℃ to 40 ℃.
Please make sure the temperature for
device will be from -10 ℃ to 40 ℃.
Name and Content of Toxic or Harmful
Substances in this Product
Toxic or Harmful Substances or Elements
Part Name
Lead
Mercury
Cadmium
（Pb）
(Hg)
(Cd)
Hexavalent
chromium
(Cr(VII)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Components of
circuit board
Print head
component
: Means that the content of the toxic or harmful substance in all homogeneous materials of this part is below
the limit stipulated in SJ/T11363-2006.
: Means that the content of the toxic or harmful substance in at least one of the homogeneous materials of this
part is beyond the limit stipulated in SJ/T11363-2006; but as for the component marked with “×” on the table,
the content is beyond the l imit since there is no alternative mature technology in the industry yet.
The products reaching or exceeding the environmental service life shall be recycled per “Regulations
on the Control and Management of Electronic Information Products” and shall not be littered.
Package content
1× main machine
1× user manual
1× power adapter
Manufacture
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
EU Regulatory Conformance
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the radio equipment type is in compliance with Directive
Technical features and characteristic
the product includes the following features and characteristics：
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com
BT
Notice: Observe the national local regulations in the location where the device is to beused. This device may be
restricted for use in some or all member states of the European Union (EU).
Adapter shall be installed near the equipment and shall be easily accessible.
The operating temperature of the device between 0℃ to 45℃.
The device complies with RF specifications when the device used at 20cm form your body
This product can be used across EU member states.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct theinterference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Operation Frequency
2402MHz-2480MHz
Transmitted
2dBm
BLE
Operation Frequency
2402MHz-2480MHz
Transmitted
2dBm
WIFI
Operation Frequency
2412MHz-2462MHz
Transmitted
18dBm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : T2 LITE中性英文版版用户指南_20180905
Metadata Date                   : 2018:10:10 14:21:39+08:00
Modify Date                     : 2018:10:10 14:21:39+08:00
Create Date                     : 2018:09:06 11:51:43+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 84
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7269 bytes, use -b option to extract)
Instance ID                     : uuid:4a97906c-77c6-436a-8a17-f528f7935b9e
Document ID                     : xmp.did:8f405551-3b8c-43ca-a6c7-7be62f5dbcc8
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:40e1c9d4-63ca-9c40-85a1-d0be7b7b4712
Derived From Document ID        : xmp.did:987a9fcd-c78a-41d1-873f-43328cfcaafb
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:07fe9ed1-210d-4a39-92b6-1b59da13b510, xmp.iid:8f405551-3b8c-43ca-a6c7-7be62f5dbcc8
History When                    : 2016:08:22 15:59:19+08:00, 2018:09:06 11:51:40+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 320.000004
Max Page Size H                 : 160.000033
Max Page Size Unit              : Millimeters
Font Name                       : PingFang-SC-Medium, PingFang-SC-Regular, PingFangSC-Regular, MicrosoftYaHeiUI
Font Family                     : 苹方, 苹方, 苹方-简, MicrosoftYaHeiUI
Font Face                       : 中等, 常规, 常规体
Font Type                       : TrueType, TrueType, Open Type, Unknown
Font Version                    : 10.11d9e1, 10.11d9e1, 13.0d1e3, 13.0d1e1
Font Composite                  : False, False, False, False
Font File Name                  : PingFang Medium.ttf, PingFang Regular.ttf, PingFang.ttc, STHeiti Light.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 165 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 425 C, AutoCAD Color, AutoCAD Color 2, AutoCAD Color 6, C=0 M=72 Y=92 K=0, PANTONE 165 C, AutoCAD Color 3, AutoCAD Color 4, AutoCAD Color 5
Swatch Colorant Type            : SPOT, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK
Swatch Colorant Cyan            : 0.000000, 92.971700, 37.241200, 72.725999, 0.000000, 0.293000, 18.027000, 4.934800
Swatch Colorant Magenta         : 0.000000, 87.972802, 76.470602, 66.765797, 72.000000, 42.935801, 13.553099, 3.784200
Swatch Colorant Yellow          : 0.000000, 89.019603, 0.000000, 65.303999, 92.000000, 90.499699, 13.037300, 3.784200
Swatch Colorant Black           : 76.999998, 79.998499, 0.000000, 79.150099, 0.000000, 0.000000, 0.000000, 0.000000
Swatch Colorant L               : 64.705902
Swatch Colorant A               : 59
Swatch Colorant B               : 68
Producer                        : Adobe PDF library 15.00
Page Count                      : 7
Creator                         : Adobe Illustrator(R) 17.0
AI Creator Version              : 21.0.0
For                             : 123,
Bounding Box                    : -1156 -304 2984 1056
AI Build Number                 : 223
AI Color Usage                  : Color
AI Ruler Units                  : Millimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 5
Container Version               : 11
Creator Version                 : 21

EXIF Metadata provided by EXIF.tools