Sunmi Technology T2MINI POS system User Manual 04 T2 MINI UM non NFC v2

Download:
Mirror Download [FCC.gov]
Document ID	4118134
Application ID	ffXPIjUFruxzooCI1IJqVA==
Document Description	04 T2 MINI_UM_non_NFC-v2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	173.35kB (2166818 bits)
Date Submitted	2018-12-27 00:00:00
Date Available	2018-12-28 00:00:00
Creation Date	2018-09-21 11:09:27
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-12-27 14:30:29
Document Title	T2 MINI通用英文版用户指南_20180917-认证用-无NFC
Document Creator	Adobe Illustrator CC 2017 (Macintosh)

T2 MINI
POS User Manual Book
Before using this product, please carefully read this manual and keep it properly.
Guide for quick installation
Simple Settings
To start this intelligent device for commercial use, you only need several steps.
Press ON button to light the screen. First entering the startup screen, follow the prompts.
You can choose from two network modes on this device.
Wi-Fi settings
· Click “Settings” button and open WLAN to enter the WLAN-searching interface.
Wait for the list of available WLAN hotspots.
· Click corresponding WLAN. If an encrypted network is selected, the device will not be
connected to the WLAN until the password is entered.
LAN settings
How to download/use APPs
Relevant Apps can be downloaded while the network is connected. Open the App market,
and search and download the App to complete the installation.
1 Press the open button to open the cover of the printer.
2 Place the thermal paper in the printer.
3 Connect with the power supply.
Press ON button and the printer will be
4 turned
on in two seconds.
To inquire detailed information of the above software: select “settings -> application”, and select corresponding
software to inquire its information;
how to uninstall the software: select “settings -> application -> application management -> uninstall” to uninstall
the application; or press the icon and drag it into the trash can to uninstall it.
For more help, please refer to the Help App inside the device
Introduction to the POS
paper output exit of the printer
button to open the cover of the printer
main screen
ON button
cover of the printer
price-displaying screen
Paper output exit of the printer
It is used to print receipts when the device is on.
Button to open the cover of the printer
It is used to open the cover of the printer and change
the paper.
58 thermal printer version
（L1320）
80 thermal printer version
（L1322）
Main screen
It is the touch screen used by the operator.
ON button
While the device is off, click the ON button to turn on
the machine；
While the device is under use, press ON button for 2 to
3 seconds to turn on or turn off the device.
While the device is on, press ON button for 11
seconds to turn off the device.
Price-displaying screen
It is used for displaying the price information of the
customer.
Instruction to load paper
5V
TXD
RXD
GND
headset USB
jack
port
serial
port
USB
port
LAN
port
cashbox power supply
port
port
Micro USB debugging port
TF card slot
debugging button
Description of the paper
58 version supports the thermal paper with the size of
57±0.5mm×Ø 60mm；
80 version supports the thermal paper with the size of
79±0.5mm×Ø 60mm.
TF card slot
It is used for external expansion TF memory card.
Micro USB debugging port, debugging button
They are used to debug the device.
Cashbox port
It is used to connect the cashbox, with an electrical impulse of 120ms and no continuous power
supply being provided. This device only supports external connection with 24V/1A cashbox. If
12V cashbox is used, there may be risks that the circuit of the cashbox will be burnt.
Regular fault debugging
Problems
Solutions
What if the printer
is dead?
Press the ON button for 11 seconds, then the printer is off. Click the ON
button to turn the printer on.
What if the printer
does not work?
Make sure the cover is closed correctly.
Make sure whether the paper is jammed.
What if the printed
paper is blank?
Please check whether the paper roll is put upside down;
Please check whether wrong thermal paper roll is used.
What if the printing
is blur?
Please check whether the thermal printhead is dirty. If it is, please clean it with swab that
has been dipped in anhydrous alcohol.
Please use quality thermal paper to avoid blur printing due to bad quality of paper.
General parameters of the POS
Name and content of toxic and harmful substances
contained in this product are shown in the following table
Operating system
Android 7.1 sunmi secure operating system
Processor
Qualcomm Snapdragon with Octa-Core
Memory
8GB ROM+1GB RAM
Screen
Main screen 11.6 inches, HD resolution 1366 x 768
Touch screen
G+G capacitive multi-touch touch screen
Customer display
FSTN,128 x 40 Dots
Printer
Name of parts
Toxic and harmful substances and elements
（Pb）
(Hg)
(Cd)
(Cr(VII)
(PBB)
(PBDE)
Circuit board
Shell
High-speed 58 thermal printer is installed,
High-speed 80 thermal printer is installed,
with a printing speed of 70 mm/s,
with an automatic cutter and a printing speed
supporting the paper roll with a maximum
of 160 mm/s, supporting the paper roll with
diameter of 60 mm.
a maximum diameter of 60 mm.
Network
2G&3G&4G (optional)
Wi-Fi
2.4G, support IEEE 802.11 b/g/n
Bluetooth
Support Bluetooth 2.1/3.0/4.0, support BLE
QR code scanning camera
N/A
NFC
Button
:It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified
in SJ/T11363-2006.
:It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one
homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is
no applicable material to replace it currently.
For products that have reached or passed the service years for environmental protection, they should be recycled
according to Measures for Control and Management of Electronic Information Products and should not be thrown
away at will.
Operation Frequency
Transmitted
BT/BLE
2402MHz-2480MHz
wifi
2412MHz-2462MHz
N/A
2dBm
16dBm
CDMA BC0
824-849 MHz (TX), 869-894 MHz (RX)
25dBm
ON button (screen-locking button) + volume increase/decrease button
GSM 850
824-849 MHz (TX), 869-894 MHz (RX)
34dBm
GSM 1900
1850-1910 MHz (TX),1930-1990 MHz(Rx)
30dBm
LTE BAND 38
2570-2620 MHz (TX/RX)
23dBm
LTE BAND 41
2555-2655 MHz (TX/RX)
23dBm
Loudspeaker
1.2W
SIM card slot
1 (optional)
External memory card
Support MicroSD(TF), maximum 64G
WCDMA BAND 2
1850-1910 MHz (TX), 1930-1990 MHz (RX)
23dBm
4 x USB TypeA port, 1 x RJ11 serial port, 1 x RJ12 cashbox port, 1 x RJ45 LAN port，
WCDMA BAND 5
824-849 MHz (TX), 869-894 MHz (RX)
24dBm
LTE BAND 38
2570-2620 MHz (TX/RX)
23dBm
WCDMA BAND 8
880-915MHz (TX), 925-960MHz (RX)
23dBm
GSM 850
824-849 MHz(TX), 869-894 MHz(RX),
34dBm
External interface
1 x headset jack, 1 x power supply port, 1 x Micro-USB debugging port
Power adapter
Input：AC100~240V/1.7A Output：DC24V/2.5A
Dimensions
290mm x 290mm x 100mm
GSM 1900
1850.0–1910.0MHz (TX), 1930.0–1990.0MHz (RX)
30dBm
Working environment
Working temperature: -10°C~55°C Storage temperature: -20°C~60°C
GSM 1800
1710.0–1785.0MHz (TX), 1805.0–1880.0 MHz (RX)
30dBm
GSM 900
880.0–915.0MHz(TX), 925.0–960.0MHz(RX)
33dBm
Precautions
EU Regulatory Conformance
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the radio equipment type is in compliance with
Directive
Warning
Important Safety Instructions
· Please insert the AC plug into the AC outlet according
to the identifying input on the power adapter;
· Avoid installing or using during thunder and lightning,other
wise lightning stroke may occur;
· It is prohibited to use the device in any places with
potential explosive gases;
· Cut off the power immediately if there is abnormal
smell, overheating or smog；
· Nonprofessionals shall not open the power adapter
anyhow so as to avoid dangers;
· Do not touch the sharp paper cutting tool!
FCC Regulations:
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by
one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
· The device is a Grade A product. In living environment,
the product may cause radio interference. Therefore,
users may be required to take practical measures
against the interference.
· About the battery replacement:
1. It may cause explosion with wrong type battery
2. Old battery which is replaced should be handled
by repair man, do not put it in fire!
The company is not responsible for the following behaviors:
· Damages caused by using and maintaining the device
without following the User Guide;
· Damages or problems caused by selection of objects or
consumables (products which are not the initial ones
provided or recognized by the company)；
· Adapter shall be installed near the equipment and
shall be easily accessible.
· No one is entitled to modify or change the product
unless permitted by the company；
· The operating temperature of the device between
-10℃ to 55℃.
· This product can be used across EU member states.
· The operating system of this product supports the
official system update.If the third party’s ROM system is
swiped by the user or the system file is modified with
cracking method, it may lead to the instability of the
system and bring about safety risk & security threat.
Recommendation
Disclaimer
· The device complies with RF specifications when
the device used at 20cm form your body.
· Do not use the device near water or in humid
environment.Keep liquid from falling onto the
terminal;
· Do not use the device in extremely cold and hot
environment, e.g. around fire or lighted cigarettes;
· Do not smash, throw or bend the device;
· Use the device in clean and dustfree environment
as much as possible and keep small items from
falling into the terminal;
· Do not use it near medical devices unless permitted.
Discrepancies between the product and the file concerning
details may raise due to product updates. Please be subject to
the material object. The company reserves the right to
interpret the file and the right to revise this manual without
prior notices.
Please make sure the temperature for adapter will be from
-10 ℃ to 55 ℃.
Please make sure the temperature for device will be from
-10 ℃ to 55 ℃.
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com
Notice: The device complies with RF specifications when the device used at
least 20cm from human body.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users
and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:09:21 11:09:27+08:00
Creator                         : Adobe Illustrator CC 2017 (Macintosh)
Modify Date                     : 2018:12:27 14:30:29+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : T2 MINI通用英文版用户指南_20180917-认证用-无NFC
Metadata Date                   : 2018:12:27 14:30:29+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 112
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 8956 bytes, use -b option to extract)
Instance ID                     : uuid:0605e056-1c8f-4df3-a27b-3aeb6601de5e
Document ID                     : xmp.did:2f070bb8-27cc-457f-9dc9-e52dad46bf9d
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:be6d3b99-e1b6-f647-8173-c252bc5ceda4
Derived From Document ID        : xmp.did:f609c421-f999-44de-a102-efdf04f01ac5
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:07fe9ed1-210d-4a39-92b6-1b59da13b510, xmp.iid:2f070bb8-27cc-457f-9dc9-e52dad46bf9d
History When                    : 2016:08:22 15:59:19+08:00, 2018:09:21 11:09:25+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 320.000101
Max Page Size H                 : 159.999890
Max Page Size Unit              : Millimeters
Font Name                       : PingFang-SC-Bold, PingFang-SC-Heavy, PingFang-SC-Light, PingFang-SC-Medium, PingFang-SC-Regular
Font Family                     : 苹方, 苹方, 苹方, 苹方, 苹方
Font Face                       : 粗体, 特粗, 细体, 中等, 常规
Font Type                       : TrueType, TrueType, TrueType, TrueType, TrueType
Font Version                    : 10.11d9e1, 10.11d9e1, 10.11d9e1, 10.11d9e1, 10.11d9e1
Font Composite                  : False, False, False, False, False
Font File Name                  : PingFang Bold.ttf, PingFang Heavy.ttf, PingFang Light.ttf, PingFang Medium.ttf, PingFang Regular.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 165 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 425 C, AutoCAD Color, AutoCAD Color 2, AutoCAD Color 6, C=0 M=72 Y=92 K=0, PANTONE 165 C, 线框色
Swatch Colorant Type            : SPOT, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, Lab, CMYK
Swatch Colorant Cyan            : 0.000000, 92.971700, 37.241200, 72.725999, 0.000000, 0.000000
Swatch Colorant Magenta         : 0.000000, 87.972802, 76.470602, 66.765797, 72.000000, 0.000000
Swatch Colorant Yellow          : 0.000000, 89.019603, 0.000000, 65.303999, 92.000000, 0.000000
Swatch Colorant Black           : 76.999998, 79.998499, 0.000000, 79.150099, 0.000000, 70.000000
Swatch Colorant L               : 64.705902
Swatch Colorant A               : 59
Swatch Colorant B               : 68
Producer                        : Adobe PDF library 15.00
Page Count                      : 6
For                             : 123,
Bounding Box                    : -589 -290 2417 1026
AI Creator Version              : 21.0.0
AI Build Number                 : 223
AI Color Usage                  : Color
AI Ruler Units                  : Millimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 3
Container Version               : 11
Creator Version                 : 21

EXIF Metadata provided by EXIF.tools