Sunniwell GTAR100A Smart Home Gateway User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4128043
Application ID	oUz6T9MoACbqGI4xV3Evbw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.55kB (681934 bits)
Date Submitted	2019-01-02 00:00:00
Date Available	2019-01-02 00:00:00
Creation Date	2018-12-29 14:13:29
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2018-12-29 17:50:33
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	admin

1. Connecting Your Device
Network Connection
Wireless connection
Broadband network
SSID (Wi-Fi's name) is fixed at the bottom of the device.
LAN cable
Power Adapter
Installation Manual
Wired connection
Public network includes PPPoe
Ethernet port
WAN port
LAN port
WPS button:
Short press shortly for WPS function and 8 seconds long press for restore the factory settings.
2. Router settings(1/4)
2. Router settings(2/4)
2. Router settings(3/4)
2. Router settings(4/4)
1) Connect the router and the device with wired or wireless network.
Type”192.168.17.1” in the browser address bar and hit the Enter key.
Please refer to the FAQ1 and try again if there is an exception.
3) Click the WAN switch and select the network connection mode.
B: Please enter the fixed IP address, subnet mask, default gateway
and DNS server.
5. The Wi-Fi settings can be changed as required.
SSID (Wi-Fi name), password (requires more than 8-bit
characters), and the 5GHz Wi-Fi can be switched on and off.
2) Please enter the default password “admin” on the login page.
NOTE: Some types of modems use other Dial-up Internet access.
B: Fixed IP connection
4) Please enter the user information.
A: If the user select to obtain an IP address
automatically, then the user information is not required.
C: Please enter the user name and the password of broadband
network. Please consult the internet service provider if the user doesn't
remember the information exactly.
A: Automatic IP connection
NOTE: Please do not select 5G Wi-Fi, for it will not be displayed on
devices which do not support 5G networks.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Regulation information
C: PPPoe connection
(1) This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
(2) This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm
separation between antenna and body.
(1) The device is going to be operated in 5150~5250MHz frequency range. It is restricted indoor environment only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : admin
Create Date                     : 2018:12:29 14:13:29+08:00
Modify Date                     : 2018:12:29 17:50:33+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : admin
Title                           : FCC英文说明书.cdr
Creator Tool                    : CorelDRAW
Metadata Date                   : 2018:12:29 17:50:33+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:1e1ff605-9b4d-4714-a399-2d1611050f43
Instance ID                     : uuid:0dcf520b-1ff2-42f3-843d-e8a341d94690
Page Count                      : 1

EXIF Metadata provided by EXIF.tools