Sunpark Electronics 120332IS Electronic Ballast User Manual manual
Sunpark Electronics Corp Electronic Ballast manual
manual
ELECTRONIC BALLAST |NSTALLATION INSTRUCTION Model : 120-3/32 IS CAUTIONARY NOTES: Do not use this equipment for other than intended use. 1. Verify that the line voltage matches the ballast voltage 2. Installation to be made by a qualified person in accordance with applicable codes. Warning This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Features 120V AC input Power factor: > 0.95 Low harmonics Class P Sound rating A UL, cUL recognized. File E177888 Indoor / outdoor use Lamp type 8. power consumption : Lamp Power consumption [Watts] 32wT8 x 3 91 Before installation 1. Disconnect line voltage before installing or replacing lamp. 2. Ballast case must be grounded. 3. Place the ballast to a stable support and fix it. Installatlon 1 Connect the lamps to the ballast according to the label . Ballast supports only the type of lamps specified on the product label. 2. Connect the AC power line, Connect the black wire to L terminal and white wire to N terminal of the AC source. 3. Connections of power wires must be fully insulated. SUNPARK ELECTRONICS CORP.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2003:08:07 14:21:34+08:00 Create Date : 2003:07:14 10:01:01+08:00 Creator : Acrobat 4.0 Scan Plug-in for Windows Page Count : 1 Has XFA : No Mod Date : 2003:07:14 10:15:48+08:00 Creation Date : 2003:07:14 10:01:01+08:00 Producer : Acrobat 4.0 Scan Plug-in for Windows Metadata Date : 2003:07:14 10:15:48+08:00EXIF Metadata provided by EXIF.tools