Sunrex Technology 415C Wireless Keyboard User Manual RT415C 980825 a
Sunrex Technology Corp Wireless Keyboard RT415C 980825 a
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1159887 |
| Application ID | O8AnGZCe07y+0XadmTT4oA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 4.09kB (51125 bits) |
| Date Submitted | 2009-08-27 00:00:00 |
| Date Available | 2009-08-27 00:00:00 |
| Creation Date | 2009-08-26 16:13:51 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2009-08-26 16:13:51 |
| Document Title | Microsoft Word - RT415C- User Manual 980825_a_.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | ccs |
Wireless Keyboard Model No: RT415C Maintain the Keyboard Touch-pad cleaning If the product have Touch-pad device, when the cursor skip or move abnormally, Clean the pad . Troubleshooting Wireless Keyboard no function ‧Make sure receiver dongle plug into correct port. Receiver port should plug into PC USB port. For the best efficiency, keep the receiver 8 inch or 20 cm distance with other electrical device. Ex. Computer, Monitor.. ‧Make sure you set up the battery correctly. And make sure battery is full charged. ‧Set up the communication between receiver and keyboard. Press the button on the receiver, then press “ID setting button＂ on the keyboard to adjust the frequency. If you have SUNREX or JME wireless keyboard and setting instruction. Make sure you have press the “ID setting button＂ and “link button, the Fn and c key＂ on keyboard at the same time. ‧Try to remove and link receiver and computer once again. Troubleshooting for PC connection ‧Make sure the receiver dongle is plugged into the USB port . Don＇t remove or plug the dongle when PC running. ‧Make sure your USB port has the proper configuration. Refer to your computer documentation for the correct port configuration. ‧Try to remove and are plug receiver dongle into PC. Cursor don’t move smoothly ‧Clean the Touch-pad surface, if your keyboard have this device. ‧For the wireless device, try to change the receiver position. It may be caused by the long distance between receiver and touch-pad. Also may caused by PC monitor( or big metal barrier) that will interference the receiver. It also may be caused by low power battery. Check the battery according to steps mentioned before. You also can reset the link between keyboard and receiver. When you do That, press the button on the receiver and then press “ Fn and c key ＂ in the keyboard for more than one second . Compatible with Windows 98SE/Me/2000/XP/Vista ‧Support Windows Me/2000/XP/Vista hot Key Function Keyboard Specification Electronics specification The RT415C is 88(US/UK) Keys wireless keyboard. Other specification Battery AAA * 4 Power Consumption Power Low power Working mode Keyboard mode Mouse mode Standby mode Sleep mode : 6VDC, +/-5% :4.5VDC(KEYBOARD AND TOUCHPAD NOT WORKING) : 8mA(Max.) : 4 ~ 5mA : 4.6mA : 4mA :35uA(after 10 minutes) RF specification Frequency : 2.407 ~2.477 GHz Modulation mode : GFSK Channel : 5ch ID number : 2^32 Link : “FN + C” KEY Effective distance : 10M Dongle RX903A Power consumption 5VDC, +-5%, 60mA Maximum Mouse function Touch Pad with wheel+2 button Mechanical specification Configuration Dimension 300(L) * 210(W) * 19(H)mm Weight 520g (No Battery) Receiver Specification Electronics specification Interface connector Description ower supply Keyboard data Keyboard clock Logic ground Voltage +5V DC D- singal D+ singal Other specification Power consumption 5VDC, ±5%,60mA Maximum RF specification Frequency : 2.407~2.477GHz Modulation mode : GFSK Channel : 5ch ID number : 2^32 Link : “SW” Key Effective distance : 10M Compatible with Windows Windows ME/2000/XP/VISTA Mechanical specification Configuration Dimension 54.1*22.4*8.5mm Weight 15g max. •LED LASER FOR class I Pins Connector • operating temperature : 40 degree C FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2009:08:26 16:13:51+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2009:08:26 16:13:51+08:00 Format : application/pdf Creator : ccs Title : Microsoft Word - RT415C- User Manual 980825_a_.doc Document ID : uuid:9f3f62b6-d909-471e-baca-89239df277e5 Instance ID : uuid:8d1f1e6f-7e5e-4a70-87aa-9ff03b0d7112 Page Count : 5 Author : ccsEXIF Metadata provided by EXIF.tools