Sunrex Technology EBK11CA Air mini BT Keyboard User Manual EBK 11CA

Sunrex Technology Corp Air mini BT Keyboard EBK 11CA

User Manual

Air mini BT KeyboardEBK-11CAUser ManualImportant InformationSystem Requirements Precondition for the use of the keyboard is that your device (PC, notebook, tablet, handheld, etc.)• is hardware-sided Bluetooth-enabled (e.g. by an integrated Bluetooth module or external adapter) • software-sided (Bluetooth) supports faultlessly the HID profile• software-sided (operating system) supports faultlessly standard keyboard driverswith corresponding country code Hardware Installation Ensure for the further procedure that the used Bluetooth driver software was installed correctly on your PC. In order to open up the battery case which is on the back side of the keyboard, applylight pressure and pull the entire cover on the back of the keyboard downwards.Now put in two type AAA 1.5V batteries, considering the right polarity in the batterycase.Switch the on/off switch to On. After connecting the Bluetooth adapter with your PC, the blue Bluetooth logo appearsat the bottom right corner of the screen. ID Pairing ProcedurePress and hold the Fn-key together with the ESC/ -key for 2 seconds. This initiates the pairing process and a synchronization signal is sent to the BT receiver.The synchronization process can take up to 10 seconds. The LED (top, left corner) will be blinking in green during this process. When it turns off, the pairing is complete, the synchronization process is now complete. PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
A double click with the left mouse key on the Bluetooth logo opens the menu  Bluetooth devices.Note:-Make sure your PC is ON and running when doing the pairing procedure.-You don’t have to pair ID again after changing batteries. If it can’t work, please followthe steps above to pair ID. Import Usage InformationBattery:1. We recommend using alkaline batteries for a longer battery life.2. Don’t mix different types of batteries or new and old batteries together. Alwaysreplaced old batteries with new and same type batteries. 3. Remove batteries after long periods of non-use. Battery leakage or corrosion maydamage the device quality and cause danger.Rating:Keyboard: 3VDC 50mA Max. operating temperature: 40CCAUTIONThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation. Any changes or modifications not expressly approved by the partyresponsible for compliance could void the authority to operate equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com
television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Industry Canada NoticeOperation is subject to the following two conditions: (1) this device maynot cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

Navigation menu