Sunrex Technology HSAS001K Wireless Keyboard User Manual Manual HSA S001K HSA S003K with Canada statement
Sunrex Technology Corp Wireless Keyboard Manual HSA S001K HSA S003K with Canada statement
User Manual
HP Wireless Collaboration Keyboard & HP Wireless Premium Keyboard Model: HSA-S001K / HSA-S003K User Manual HP Wireless Collaboration Keyboard (HSA-S001K) HP Wireless Premium Keyboard(HSA-S003K) Important Information For Windows® 8.1 operating system, you can use the keyboard immediately after plugging the dongle (receiver) into the USB port. Hardware Installation Plug in the dongle into your available USB port. Please turn on power switch. ID Pairing Procedure Keyboard and dongle has paired when ship out. If it can’t work, please follow the steps to process the ID pairing procedure. 1. ID pairing/connect button location: Keyboard ID pairing/connect button on the bottom of the keyboard. 2. After you plug the dongle into the USB port, please hold the keyboard close to the dongle within 6cm and press the “Connect” button over 5 second. 3. If the pairing succeed Amber LED will flash 3 times 4. If the pairing fail Amber LED will turns on 10 sec then OFF Note: -Make sure your PC is ON and running when doing the pairing procedure. -You don’t have to pair ID again after changing batteries. If it can’t work, please follow the steps above to pair ID. Specification Interface: Wireless 2.4 GHz Frequency band: 2406MHz-2475MHz Maximum radio-frequency power transmitted: ≤10 mW Power: Li-ion Battery Ports: Micro USB Type B charge port Key Module: Scissor type, leverage HP premium NB series Others: Link 5 connect button, function lock switch, power switch Item Specification Operating Temperature 0 ~ +40℃ Storage Temperature -20 ~ +60℃ Compatibility USB interface Operating system Windows 7/8.1/10 Dimension 433 (L) * 141 (W) * 11.80 (H) mm Key specification Key no US(105);UK(106);JP(110) Key structure Scissor type Switch mechanism Membrane Key cap legend Printed (Lync Buttons Laser Printed) LED Number Color Amber , White, Green Indicator Battery Low: - If battery voltage ≤ 3.4V indicator (Amber LED) will turn on Pairing: - If the pairing succeed Amber LED will flash 3 times (on/off: 100ms/400ms) - If the pairing fail Amber LED will turns on 10 sec then OFF RF Specification Frequency 2.4GHz` Deviation +/-320KHz Modulation mode GFSK Channel 70CH ID number 2^32 Connect Press “Connect” Button 5 sec (distance from Dongle 6 cm) Effective operating distance 10Meters Antenna Specification PCB Antenna Power Specification Battery Li-ion Battery Power consumption DC 3.7V , ±5% Battery life Other Appearance 3 month Stop transmission after 5 min of idle or when key is continuously pressed Bottom Function Funtion System Sleep Lock Computer My Computer/File Explorer Display Options Brightness Decrement Brightness Increment Search Charm Devices Charm Lync Contacts Lync Calendar Share Screen Mute Volume decrement Volume Increment Call Answer(HSA-S003K Non) Call End(HSA-S003K Non) Video Mute(HSA-S003K Non) Microphone Mute(HSA-S003K Non) RF 2.4GHz frequency table The channel selection algorithm produces a subset containing 13 of the possible 78 channels. The channel selection algorithm is based on the network ID, with each channel in the subset being six megahertz from the nearest neighboring channels in the subset. This algorithm reduces the possibility of multiple bridges selecting the same channels in the same order at the same time. CH Frequency CH Frequency CH Frequency CH Frequency 2.406GHz 21 2.426GHz 41 2.446GHz 61 2.466GHz 2.407GHz 22 2.427GHz 42 2.447GHz 62 2.467GHz 2.408GHz 23 2.428GHz 43 2.448GHz 63 2.468GHz 2.409GHz 24 2.429GHz 44 2.449GHz 64 2.469GHz 2.410GHz 25 2.430GHz 45 2.450GHz 65 2.470GHz 2.411GHz 26 2.431GHz 46 2.451GHz 66 2.471GHz 2.412GHz 27 2.432GHz 47 2.452GHz 67 2.472GHz 2.413GHz 28 2.433GHz 48 2.453GHz 68 2.473GHz 2.414GHz 29 2.434GHz 49 2.454GHz 69 2.474GHz 10 2.415GHz 30 2.435GHz 50 2.455GHz 70 2.475GHz 11 2.416GHz 31 2.436GHz 51 2.456GHz 12 2.417GHz 32 2.437GHz 52 2.457GHz 13 2.418GHz 33 2.438GHz 53 2.458GHz 14 2.419GHz 34 2.439GHz 54 2.459GHz 15 2.420GHz 35 2.440GHz 55 2.460GHz 16 2.421GHz 36 2.441GHz 56 2.461GHz 17 2.422GHz 37 2.442GHz 57 2.462GHz 18 2.423GHz 38 2.443GHz 58 2.463GHz 19 2.424GHz 39 2.444GHz 59 2.464GHz 20 2.425GHz 40 2.445GHz 60 2.465GHz Label Specification: Manufacturer Name: HP Inc. Corporate Address: 1501 Page Mill Road Palo Alto, CA 94304, USA CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Industry Canada Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:4e7e3f2f-3d4c-11e7-0000-df1a7cf7c173 Producer : GPL Ghostscript 9.05 Keywords : () Modify Date : 2017:05:17 19:05:57+08:00 Create Date : 2017:05:17 19:05:57+08:00 Creator Tool : PDFCreator Version 1.6.2 Document ID : uuid:4e7e3f2f-3d4c-11e7-0000-df1a7cf7c173 Format : application/pdf Title : Manual-HSA-S001K HSA-S003K with Canada statement Creator : ChenRyan Description : () Author : ChenRyan Subject :EXIF Metadata provided by EXIF.tools