Sunrex Technology RM809A Wireless Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1099760
Application ID	6VWql77rQ3PTs2sjYlEh8A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.86kB (935779 bits)
Date Submitted	2009-04-22 00:00:00
Date Available	2009-04-22 00:00:00
Creation Date	2009-04-07 13:02:20
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2009-04-07 13:02:20
Document Title	User Manual
Document Creator	Adobe Acrobat 7.0

Wireless Mouse / Wireless Dongle
RM809A / RX809A
User Manual
Important Information
For Windows® XP and Windows® Vista operating system, you can use the
moue immediately after plugging the dongle (receiver) into the USB port.
Hardware Installation
1. Plug in the dongle into your available USB port.
2. Make sure the batteries of the moue is installed correctly. Please follow the
polarity signs in the battery compartment.
3. Please make sure the power switch on the back of the mouse is switched to “ON”
before using the mouse. When not in use, please turn the power switch to “OFF"
for power saving.
ID Pairing Procedure
Mouse and dongle has paired when ship out. If it can't work, please follow the steps
to process the ID pairing procedure.
1. ID pairing/connect button location:
Mouse ID pairing/connect button on the bottom of the mouse.
2. After you plug the dongle into the USB port, please hold the keyboard and mouse
close to the dongle within 0.5M and press the “CONNECT” button over 5 second.
3. If ID pairing is successful, the LED on the dongle will bright 3 seconds.
4. If ID pairing is fail, please follow the steps above to pair ID.
Note:
-Make sure your PC is ON and running when doing the pairing procedure.
-You don’t have to pair ID again after changing batteries. If it can’t work, please follow
the steps above to pair ID.
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactog¢.com
Driver Installation
1. Driver name: “HPKEYBOARDexe”.
2. Dual click the “HPKEYBOARD.exe”. The driver icon will show at the right-bottom
of the Windows system tray when the driver is loaded.
3. Function:
0 Battery volume detect:
*1
Battery volume full —)
e ».
Battery volume 50% full 9
Battery volume low 9 H
Import Usage Information
0 Battery:
1. We recommend using alkaline batteries for a longer battery life.
2. Don’t mix different types of batteries or new and old batteries together. Always
replaced old batteries with new and same type batteries.
3. Remove batteries after long periods of non-use. Battery leakage or corrosion may
damage the device quality and cause danger.
0 Mouse:
1. This optical (LED) mouse senses light to defect mouse’s movement; therefore, it
cannot work on a glass, translucent, reflective, or dark color surface.
2. The mouse can work only a clean, flat, non—slippery, opaque, and light oolor
surface in order to ensure smooth and accurate cursor action.
0 Rating:
Mouse: 3VDC 30mA
Dongle: 5VDC GOmA
0 Max. operating temperature: 40° C
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactom.com
CAUTION
This device complies with part 15 ofthe FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice
Operation is subject to the following two conditions: (1) this device may
not cause interference and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
KCC License holder: hp
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactom.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:04:07 13:02:20+08:00
Create Date                     : 2009:04:07 13:02:20+08:00
Metadata Date                   : 2009:04:07 13:02:20+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:c1b67732-0d1f-42cf-b2ca-7826de9c2ead
Instance ID                     : uuid:d675f2e4-5692-49b2-9d3d-50d42af8ce3a
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 3
Creator                         : Adobe Acrobat 7.0

EXIF Metadata provided by EXIF.tools