Sunrex Technology RX635A Wireless Dongle User Manual Manual 971031
Sunrex Technology Corp Wireless Dongle Manual 971031
bk807a manual 971031
RK635A
138~600uA
2.402~2.479GHZ
2.402~2.479GHZ
Scroll+2 Buttons
Touch-Pad function and direction key function are ON THE TOP RIGHT
HAND CORNER and change switch
40
40
direction key
direction
direction
Section 15.105 Information to the user.
For a Class B digital device or peripheral , the instructions furnished the
user shall include the following or similar statement , placed in prominent
location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the
limits for a class B digital device , pursuant to Part 15 the FCC Rules .
These limits are designed to provide reasonable protection against
harmful interference in a residential installation . This equipment
generates , uses and can radiate radio frequency energy and , if not
installed and used in accordance with the instructions , may cause harmful
interference to radio communications . However , there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception , which
can determined by turning the equipment off and on , the user is
encouraged to try to correct the interference by one or more of the
following measures :
08
LED Laser for class 1
15.21
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Part 15.19 a 3
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or
transmitter.
operating temperature : 40 degree C.
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different form that to which
the receiver is connected .
--Consult the dealer or an experienced radio/TV technician for help