Sunrex Technology RX906 Wireless Dongle User Manual

Sunrex Technology Corp Wireless Dongle

user manual

Download: Sunrex Technology RX906 Wireless Dongle User Manual
Mirror Download [FCC.gov]Sunrex Technology RX906 Wireless Dongle User Manual
Document ID1273048
Application IDObHopJpDho5hZsQxtf0ODQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.81kB (72681 bits)
Date Submitted2010-04-27 00:00:00
Date Available2010-04-27 00:00:00
Creation Date2010-04-21 10:54:19
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2010-04-21 10:54:19
Document TitleMicrosoft Word - 使用手冊.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: ccs

HP 2.4GHz Wireless Trackball Keyboard
2.4G Dongle
(RK906、RX906)
User Manual
Important Information
For Windows® XP , Windows® Vista and Windows® 7 operating system, you
can use the keyboard immediately after plugging the dongle (receiver) into the USB
port.
Hardware Installation
1. Plug in the dongle into your available USB port.
2. Make sure the batteries of the keyboard is installed correctly. Please follow the
polarity signs in the battery compartment.
3. Please make sure the power switch on the back of the Keyboard is switched to
“ON” before using the Keyboard. When not in use, please turn the power switch to
“OFF” for power saving.
ID Pairing Procedure
Keyboard mouse and dongle has paired when ship out. If it can’t work, please follow
the steps to process the ID pairing procedure.
1. ID pairing/connect button location:
Keyboard ID pairing/connect button on the bottom of the keyboard.
2. After you plug the dongle into the USB port, please hold the keyboard close to the
dongle within 0.5M and press the “
” button over 5 second.
3. If ID pairing is successful, the LED on the dongle will bright 3 seconds.
4. If ID pairing is fail, please follow the steps above to pair ID.
Note:
-Make sure your PC is ON and running when doing the pairing procedure.
-You don’t have to pair ID again after changing batteries. If it can’t work, please follow
the steps above to pair ID.
Function
Function
Fn
Icon
Fn + Function
Help
F1
Internet
F2
Sleep
F3
Lock
F4
Prev Track
F5
Play/Pause
F6
Stop
F7l
Next Track
F8
Volume Down
F9
Volume Up
F10
Mute
F11
Paring
F12
Function
Import Usage Information
‹ Battery:
1. We recommend using alkaline batteries for a longer battery life.
2. Don’t mix different types of batteries or new and old batteries together. Always
replaced old batteries with new and same type batteries.
3. Remove batteries after long periods of non-use. Battery leakage or corrosion may
damage the device quality and cause danger.
‹ Rating:
Keyboard: 3VDC 20mA
Dongle: 5VDC 60mA
‹
Max. operating temperature: 40∘C
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice
Operation is subject to the following two conditions: (1) this device may
not cause interference and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
MIC License holder: HP

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2010:04:21 10:54:19+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:04:21 10:54:19+08:00
Format                          : application/pdf
Creator                         : ccs
Title                           : Microsoft Word - 使用手冊.doc
Document ID                     : uuid:21fad6af-642a-4ad0-8fa1-a90a7c4d57ab
Instance ID                     : uuid:a948f622-cfce-422e-8ff2-a54076f1ad99
Page Count                      : 3
Author                          : ccs
EXIF Metadata provided by EXIF.tools
FCC ID Filing: J75RX906

Navigation menu