Sunricher Technology 2820 LED Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2878194
Application ID	xjyXj+S6MZN8/Cfab9YN9Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	112.56kB (1406976 bits)
Date Submitted	2016-01-20 00:00:00
Date Available	2016-01-20 00:00:00
Creation Date	2015-12-28 14:58:35
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2015-12-28 14:58:35
Document Title	Microsoft Word - User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	user

868MHz RF wireless LED Controller
Button Introduction
SR‐2820(US)
Features
•
3 zones
•
Sensitive Glass Touch Panel
•
RF Signal
•
North American Size
Parameter
Color Wheel: Touch to choose color.
Remote
Operation
Operation
touch to choose the color
DIMENSIONS
Part No.
Remarks
Voltage
Frequency
ø/h (mm)
24VDC
868MHz
120x75x29.1
R.G.B.W.
Touch
SR‐2820(US)
Switch: touch to switch on/off.
Sensor
Brightness: touch to adjusting Brightness, Press
Product Size
key once the Lamp brightness change once. can be
cycle.
Warm white & Cold White & Natural White, mixed
by RGB.
Color Running Button: touch to start or Pause color
running mode.
Zone Number:touch 1, 2, 3 to choose the
zone.
Wiring diagram
1)
Sender Connection Diagram
Safety & Warnings
•
1) The product shall be installed and serviced by a
qualified person.
For faults beyond the 5‐year warranty we
reserve the right to charge for time and parts.
2) Limited Warranty
2) IP20. Please avoid the sun and rain. When installed
•
Any defects caused by wrong operation.
outdoors, please ensure it is mounted in a water proof
•
Any damages caused by unauthorized removal,
enclosure.
maintenance, modifying, incorrect connection
3) Always be sure to mount this unit in an area with
and replacement of chips.
proper ventilation to avoid overheating.
•
4) Please check if the output voltage of any LED power
supplies used complies with the working voltage of the
Any damages due to transportation, vibration
etc. after purchase.
•
Any damages caused by earthquake, fire,
lightning, pollution and abnormal voltage.
product.
5) Never connect any cables while power is on and always
•
Any
damages
caused
by
negligence,
assure correct connections to avoid short circuits before
inappropriate storing at high temperatures
switching on.
and humidity or near harmful chemicals.
6) Please ensure that the cable is secured tightly in the
•
Product has been updated
connector
7) For update information please consult your supplier.
FCC Certification Requirements
Caution: Any changes or modifications in construction of
Warranty Agreement
this device which are not expressly approved by the party
1) We provide lifelong technical assistance with this
responsible for compliance could void the user's authority
product:
to operate the equipment.
•
5‐year warranty. We print date on every
This device complies with part 15 of the FCC Rules.
product, for example: 1125 means year 2011,
Operation is subject to the following two conditions: (1)
week 25.The warranty is for free repair or
This device may not cause harmful interference, and (2)
replacement and covers manufacturing faults
This device must accept any interference received,
only.
including
operation.
interference
that
may
cause
undesired
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and
receiver.
‐ Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV
technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1ae7388b-6a44-4840-9dad-a572875d51ed
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:12:28 14:58:35+08:00
Create Date                     : 2015:12:28 14:58:35+08:00
Document ID                     : uuid:e3a35858-39a8-4c7a-af67-0111480b9599
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.doc
Creator                         : user
Author                          : user

EXIF Metadata provided by EXIF.tools