Sunricher Technology RF281901 RF sender User Manual
Shenzhen Sunricher Technology Limited RF sender
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2963483 |
| Application ID | UuOMiCI18CZ59dQuqcG+Zw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.58kB (657311 bits) |
| Date Submitted | 2016-04-19 00:00:00 |
| Date Available | 2016-04-19 00:00:00 |
| Creation Date | 2016-03-29 11:15:37 |
| Producing Software | Corel PDF Engine Version 14.0.0.653 |
| Document Lastmod | 2016-03-30 11:32:47 |
| Document Title | User Manual |
| Document Creator | CorelDRAW |
| Document Author: | Administrator |
RF wireless LED remote controller Brief introduction of buttons Model:SR-2819S with SR-1009Fxx Indicator: indicate the state of remote control White channel: the 4th channel Color wheel 4 zones: each zone can save 3 color or modes Four zones/areas Press-button RGB+W controller Receivers work with WIFI-RF converter to be controlled by smart phone Brightness: dim up Brightness: dim down ON/OFF of all zones W+ Running button/Speed button S1 Save button S2 ww nw and cw mixed by RGB S3 Wiring diagram 1)Receiver Connection Diagram for Single Unit Product introduction Power Supply 12-36VDC 110V-230VAC SR-2819S RGBW remote controller has 4 different zones. It can get Red/ Green/ Blue/ White color directly. The remote controller can save up to 3 colors or 3 modes into corresponding buttons (S1,S2,S3) for each zone. You can choose any color through color wheel. you can set the system as RGB 3-channeloutput, or RGBW 4- SR-1009FA LED CONTROLLER white Parameter Learning Key channel output. Remote Part No. SR-2819S Operation Voltage 4.5VDC Operation Frequency 916.66MHz DIMENSIONS ø/h (mm) Remarks 48x140x16 load 3pcs 7 AAA (1.5V) batteries 2)Receiver Connection Diagram for Multiple Units Power Supply 12-36VDC Input Voltage Output Current Output Power Remarks 12-36VDC 4x5A 4x(60-180)W Constant voltage Part No. SR-1009FA 110V-230VAC Receiver Constant voltage 4x(4.2-12.6)W Constant current SR-1009FA7 12-36VDC 4x700mA 4x(8.4-25.2)W Constant current SR-1009FA Learning Key 4x(96-288)W 4x350mA LED CONTROLLER 4x8A 12-36VDC Product Size 12-36VDC white SR-1009EA SR-1009FA3 SR-1009FA white white LED CONTROLLER 17.0 55.0 Learning Key 120.0 SR-1009FA LED CONTROLLER Learning Key Note: One receiver can work with 1-8pcs SR-2819S One SR-2819S control multiple receivers The power supply chosen must be 20% higher than the actual load Operation Safety & Warnings Learning (matching) a. Do wiring according to connection diagram b. Wake up the remote control by touching ON/OFF button. c. Press learning button on receiver. d. Touch any zone button on remote control. e. Then touch color wheel. f. Connected LED light will blink to confirm zone designation. g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID. 1) The product shall be installed and serviced by a qualified person. 2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure. 3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating. 4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the product. Note 1: To choose a master from slaves by jumper for each zone. Short circuit for master. Open circuit for slave. Each zone only can set one master controller. After a period of time, the master will do synchronization operation to keep the same color or mode of all slaves in one zone. 5) Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on. 6) Please ensure that the cable is secured tightly in the connector 7) For update information please consult your supplier. Note 2: Each remote control 4 zones (areas) receivers, each area can be learned as many receivers as we can. Each receiver maximally can be controlled by 8 different remote controllers. Warranty Agreement 1) We provide lifelong technical assistance with this product: Color wheel Choose zone number , for example, and , then touch zone 1 and 3 will indicate corresponding color as we touched. , choose the color you want, Brightness Up & Down Button Short/Long press button to dim down brightness of RGB channels, Short/long press button to dim up RGB channels. “W” channel is separated from RGB channels, so we can only long press button to dimming“W” channel. Running Mode & Speed Button a. Short press , mode will run. Press it once, it runs one mode. Press button again, it stops, then press one more time, it will enter next mode. There are total 10 build-in modes. b. Long press when mode is running, Fist long press will speed up the color moving, long press again to speed down the color moving. W+ Button a. RGB channel will mix to three different white: warm white, nature white and cold white by short press For example: first press---warm white, press again---nature white, third press again—cold white, fourth press—warm white……………… b. Fast click twice W+ to switch off RGB channel. Save and recall button a. Save color: select zones from LED lighting flash twice indicate save successful b. Save running mold: select zones from LED lighting flash twice indicate save successful select a color from long press one save button from S1,S2,S3 for 2-3 second select a moving mode from long press one save button from S1,S2,S3 for 2-3 second c. Recall: select zone button which we want recall from 1-4, then short press save button S1,S2,S3. W+ 5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The warranty is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we reserve the right to charge for time and parts. 2) Limited Warrenty Any defects caused by wrong operation. Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips. Any damages due to transportation, vibration etc. after purchase. Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage. Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals. Product has been updated 3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2016:03:30 11:32:47+08:00 Create Date : 2016:03:29 11:15:37+08:00 Metadata Date : 2016:03:30 11:32:47+08:00 Creator Tool : CorelDRAW Format : application/pdf Title : 2819S说明书 Creator : Administrator Document ID : uuid:214fd6b7-4857-4c0d-b181-8009186494fc Instance ID : uuid:9115ecbc-1d75-432f-8cff-e2b0a6819f65 Producer : Corel PDF Engine Version 14.0.0.653 Page Count : 3 Author : AdministratorEXIF Metadata provided by EXIF.tools