Sunricher Technology RF2830 RF sender User Manual

Shenzhen Sunricher Technology Limited RF sender

User manual

RF Wall Mounted Touch PanelParameterWiring diagram2)Receiver Connection Diagram for Single Unit3) Connection Diagram for Multiple UnitsReceiver Product Size1)Sender DiagramConnection Power Supply12-36VDCLN110V-230VACwhi teSR-1009FALED CONTROL LER1234Learning KeySingle ColorL ED S tr ipBacklightGlass interface(White & Black) Touch sensitiveAdjust brightnessFeature4x5APower Supply12-36VDCLN110V-230VACwhi teSR-1009FALED CONTROLLER1234Learning Key4x10ASR-2830A(US)-AC/SR-2830A(US)-DCPart No. Input Voltage RemarksOutput CurrentSR-1009FA 12-36VDC Constant voltage4x(60-180)W4x5AOutput PowerSR-1009EA 12-36VDC Constant voltage4x(96-288)W4x8ARemotePart No. Operation Voltage DIMENSIONSø/h (mm)Operation FrequencySR-2830A(US)-AC 100-240VAC 120x75x29.1916.57MHzReceiverSR-1009FA3 12-36VDC Constant current4x(4.2-12.6)W4x350mASR-1009FA7 12-36VDC Constant current4x(8.4-25.2)W4x700mARemarksTouch SensorSR-2830A(US)-DC 12-24VDC 120x75x29.1916.57MHz Touch Sensor Single ColorLED StripSingle ColorL ED S tr ipSingle ColorL ED S tr ipSingle ColorL ED S tr ip120.075.029.1Power Supply12-36VDCLN110V-230VACwhi teSR-1009FALED CONTROLLER1234Lea rnin g KeySing le Co lor LED S tripwhi teSR-1009FALED CONTROLLER1234Lea rnin g Keywhi teSR-1009FALED CONTROLLER1234Lea rnin g Key4x5A4x5A4x5ASing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S tripSing le Co lor LED S trip110V-230VAC NLLN110V-230VACPower Supply12-24VDCL NSR-2830A-US(AC)L NVinSR-2830A-US(DC)GND5
OperationDescription of buttonsInstallationTurn ON/OFF4 zones control seperately or syhchronously, each zone could control multiple receivers.Save scene into S1/S2/S3.1. Learning ID with SR-1009 series:Click learning button on RF receiver →Short Touch a zone button Z1,Z2,Z3 or Z4 →Touch dimming sliderThe light flick means ID learnt successfully.Touch zone button Z1/Z2/Z3/Z4 separately over 2 seconds, which will turn ON/OFF separately.The backlight blue is ON for the zone, yellow is OFF for the zone.2. Save and replaySave: Touch dimming slider to get a color→Note:This controller is RF signal to receivers, no need cable. AC version no need driver, working directly at electric supply 100-230VAC.The DC version need a driver 12/24V.Notice : Each sender can control 4 different zones separately, each zone can be learned endless receivers , so one sender can cont rol as many receivers as you can.Safety & WarningsWarranty Agreement1) The product shall be installed and serviced by a qualified person.2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.5) Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on.6) 7) For update information please consult your supplier.Please ensure that the cable is secured tightly in the connector1) We provide lifelong technical assistance with this product: 5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The warranty is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we reserve the right to charge for time and parts.2) Limited Warrenty Any defects caused by wrong operation. Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips. Any damages due to transportation, vibration etc. after purchase. Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage. Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals. Product has been updated3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.Hold any button of S1,S2 or S3 over 2 seconds(4zones work together)The light flick means successfully saved.Replay: Short touch button S1,S2 or S3 →Replay the scene just saved.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu