Suntech ST340LC GPS Vehicle(GSM/GPRS) Tracker User Manual ST340LC222

Suntech International Ltd. GPS Vehicle(GSM/GPRS) Tracker ST340LC222

User Manual

Download: Suntech ST340LC GPS Vehicle(GSM/GPRS) Tracker User Manual ST340LC222
Mirror Download [FCC.gov]Suntech ST340LC GPS Vehicle(GSM/GPRS) Tracker User Manual ST340LC222
Document ID2464296
Application IDVZxhwvqIJErzJ2Bv7MYvUw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize40.5kB (506261 bits)
Date Submitted2014-12-04 00:00:00
Date Available2014-12-04 00:00:00
Creation Date2014-11-20 12:30:36
Producing SoftwareAcrobat Distiller 10.0.0 (Windows)
Document Lastmod2014-11-20 12:30:36
Document TitleMicrosoft Word - User Manual_ST340LC222
Document CreatorPScript5.dll Version 5.2.2
Document Author: RICHARD

ST340LC
User Manual
Suntech International Ltd.
ST3440LC User Manual
1. Intro
oduction
This doccument desccribes features, protocolss and detail operation of
o ST2xx seriees.
If there is another operation description d
document for special bu
uyer to custo
omize or mo
odel and
the conttents of the document is different w
with this, cu
ustomizing document
sh
hould be applied for
special b
buyer.
2. Ove
erview
Device cconsists of GPRS,
GPS an
nd event pa rts.
The main purpose of device re
eports gettin
ng GPS position and other informs of vehicle to
t server
periodiccally.
Device ccan control or
o check con
nnected line s and suppo
ort additiona
al functions.
2-1. Op
peration Mode
The devvice has 3 op
peration mod
des, driving, parking and
d emergency
y.
** Driv
ving
: Driv
ving status w
when ignition
n is on.
** Park
king
: Park
king status t hat starts if ignition is off
o during mo
ore than T1.
** Eme
ergency : On
nce panic bu
utton is On o
or any otherr status as pe
er designed..
The d
device sends emergency
y reports un
ntil A1 times or receiving
g server ackn
nowledge.
2-2. Re
eport
AVL reports GPS and some info
ormation at p
predefined interval, depending on th
he current modes.
Also, AV
VL sends so
ome alerts, for examp le, moveme
ent at the parking
con
ndition, chan
nging of
connectted input line
e and so on.
es all reportts with 6 tyypes, Status report, emergency, eveent, alert, alive
and
Device distinguishe
nd response.
comman
Device ccan store re
eports when
n reporting route (For example,
GP
PRS conditio
on) is not su
uccessful.
Storage capacity is up to 2,000 status rep
ports, 50 em
mergency re
eports, 50 a lert reports (include
eports) and 1500 bytes as comman
nd response
e. In case of status repo
orts, oldest report is
event re
erased a
and new rep
port is bufferred when th e buffer is fu
ull and new status reporrt enters (FIF
FO).
When re
eporting con
ndition is reccovered, devvice starts se
ending all bu
uffered repo rts.
Also, thiis capacity can increase if it is needeed.
Each typ
pe of reportss has priority
y, and priori ty is as belo
ow.
Emergen
ncy  Comm
mand Respo
onse  Alertt  Status Report
 Alive (Lowest)
ST3440LC User Manual
Emergen
ncy is the firrst to be sen
nt after recovvering GPRS
S condition.
2-3. Se
etting Param
meter
Parametters of devicce can be ch
hanged by G
GPRS or SMS, and some
e control can
n be realized
d also in
the sam
me way.
Detail protocols are described in Chapter 4 .
2-4. Features
Key fea
atures are described here;
- Powerr Down
Device can process two steps of powerr-down, Sleep and Deep Sleep, ffor reducing
g power
consumption when the vehicle is parked.
- LED In
ndicator
LED indicates GPRS and GPS sta
ates. It’s help
pful to check
k error cause
e.
- Eventss
Device h
has 2 outputt lines, 3 inp
put lines and
d ignition line.
- Updatte Firmware
e by Over Th
he Air (FOTA
A)
When FFirmware off device has some errror or has to be chan
nged for a new servicce to be
impleme
ented, devicce can upda
ate internal ROM file by
b over the air (FOTA), remotely via
v GPRS.
Custome
ers do not need
to visit every vehic le to downlo
oad the new
w firmware.
Method of FOTA de
escribes at “S
SunTech_OTA
A_UA_Protoccol” document in detail.
- Parkin
ng Lock
Device ccan check whether
the vehicle mo
oves off the preset park
king boundaary or startss driving
without ignition on
n. In the ca
ase that it notes the unauthorize
ed moving o
or driving, it sends
emergen
ncy report im
mmediately.
- Over sspeed
Device ccan check sp
peed of vehicle and send
d alert of ovver-speed to server.
- GPS A
Antenna Che
ecking
Device ccan alert when GPS ante
enna is disco
onnected.
ST3440LC User Manual
It’s applicable only for
f models that
have extternal anten
nna.
- Main Power Checcking
The devvice can re
ecognize the
e main pow
wer and infform to serrver when main power line is
disconnected or ma
ain power drrops below p
preset value.
It’s applicable only for
f battery model.
- Batterry Error Alerrt
Device ccan alert abo
out battery error
related
d on charging.
It’s applicable only for
f battery model.
3. Prottocol Construction
mand and re
eports are sttring and fo llows below format.
All comm
Every filed is disting
guished by semi colon.
m device is ended by ‘＼
＼r’ (0x0D).
All report string from
and message
e format (frrom server tto device)
Comma
HDR
DEV_ID
VE
ER
Field 1
Field 2
…
Field n
Field
Definition
ns
HDR
String
“SA20
00” + Comm
mand type
DEV_ID
6 char.
Devicee ID of AVL
VER
“02”
Field 1 ~ n
String
Rema
ark
Protoccol Version. This is fixed with “02”.
Conteents
Device IID is unique number of each device that consistts of 6digits.
If the co
ommand has invalid value or DEV_I D of the command thatt is sent by GPRS or SM
MS is not
matched
d with DEV_IID of the unit.
ormat (from device to sserver)
Report message fo
HDR
DEV_ID
SW
W_VER
Field 1
Field
Definition
ns
HDR
String
Field 2
…
Field n
Rema
ark
“SA20
00” + Reportt type
ST3440LC User Manual
DEV_ID
6 char.
Devicee ID of AVL
VER
“001”
Softw are version that
the dev
vice has.
Field 1 ~ n
String
Conteents
4. Com
mmands
When the device iss received a command,, it respond
ds with response string and changes some
parametters or acts related operration.
4-1. Ne
etwork Parrameters Se
etting
HDR
DEV_ID
B__SEVER_IP
nition
● Defin
VER
AUTH
B_SE
EVER_IP
Definitions
HDR
“SA200N
NTW”
VER
AUTH
USER
R_ID
SMS_NO
USE
ER_PWD
SEVER_IP
SEVER_PORT
PIN_NO
: Set
S network parameters and PIN num
mber.
Field
DEV_ID
AP
PN
6 cha
ar.
“02””
‘0’ /‘1’/’A’
U nit
Rem
mark
Com
mmand type
Device ID
Proto
ocol Version
GPRS
S authentication
0 : PAP(‘NO’
PA
in Synctrack)
1 : CHAP(‘YES’
in
n Synctrack)
A : Automatic
GP
PRS set.
In
n this case, parameters
iin APN, USER_ID and
USER_PWD
field should b
be empty.
APN
String
Acce
ess Point Name
USER_IID
String
ID fo
or GPRS Access
USER_P
PWD
String
Passw
word for GPRS Access
SEVER__IP
String
Server IP Addresss
SEVER__PORT
String
Server Port
B_SEVE
ER_IP
String
Back
kup Server IP
P Address
B_SEVE
ER_PORT
String
Back
kup Server Port
SMS_N
NO
String
Phon
ne number what
the devvice sends SMS report to
o.
This can be used for backkup in the area that if GPRS
dition is not good. Or,, it can be used main
n report
cond
meth
hod when IP
P and Port arre empty.
ST3440LC User Manual
For no
n use, it should be emp
pty.
PIN_NO
String
PIN Number to release PIN lock if it is enabled

[comm
mand] SA200NTW;850000
0;02;0;interneet;;;111.111.1
111.111;8600
0;;;;
[respon
nse] SA200N
NTW;Res;850000;010;0;intternet;;; 111.111.111.111
1;8600;;;;
SA200N
NTW;Res;850000;010;A1;ttim.br;tim;tim; 111.111.111.111;86000;;;;

** If ne
etwork does not require User ID and
d Password, these fields should be eempty.
Autom
matic GPRS Set
It the device is se
et to ‘Autom
matic GPRS S
Set’, the devvice set GPR
RS parameteers automatically depend
ding on
inserte
ed SIM.
For example, if Airtel SIM is inserted, th
he device set AUTH to
o 0, APN to
o “aitelgprs.ccom”, USER__ID and
USER_P
PASS to emp
pty.
And th
he device re
eports respo
onse string after adding
g real GPRS
S parameterss when auto
omatic GPRS set is
selecte
ed.
4-2. Re
eport Param
meter Settiing
HDR
DEV_ID
ANGLE_RPT
● Defin
nition
VER
T1
T2
HDR
“SA200R
RPT”
T1
SND
D_DIST
T4
SMS_TT1
SMS_T
T2
SMS__PACK_NO
: Set
S paramete
ers related o
on report intterval.
Definitions
VER
A1
RPT_TYPE
Field
DEV_ID
T3
U nit
Com
mmand type
6 cha
ar.
Device ID
“02””
String
Rem
mark
Proto
ocol Version
S ec
Interrval for sending status reeport in parking mode
Rang
ge : 0 ~ 86400
If 0, report in parking
will be sent on
nly one time when
vehiccle starts parking.
T2
String
S ec
Interrval for sending status reeport in driv
ving mode
Rang
ge : 0 ~ 60000
ST3440LC User Manual
If 0, report in driving
will be sent on
nly one time when
vehiccle starts driving.
T3
String
S ec
Interrval for sending status reeport in eme
ergency mod
de
Rang
ge : 0 ~ 9999
If 0, emergency report will be sent on
nly one time when
e occurs.
emergency state
A1
String
Num
mber of attem
mpts for em
mergency rep
port until the
e device
gets acknowledg
ge from servver
ncy report w
will be sent.
If 0, no emergen
SND_D
DIST
String
Meeter
Dista
ance intervall for sending
g status repo
ort.
Rang
ge : 0 ~ 60000 (60km)
If 0, status reporrt related on
n moving disstance is disa
abled.
If no
ot 0, stats report is send when
n traveled distance
reach
hes predefin
ned SND_DISST.
T4
String
S ec
Interrval for sending keep alivve string
SMS_T1
String
Min
Interrval for sending status reeport in parking mode
SMS_T2
String
Min
Interrval for sending status reeport in driv
ving mode
SMS_PA
ACK_NO
String
ANGLE
E_RPT
String
Repo
ort No in one SMS messsage
Deg
gree
Repo
ort STT messsage if it’s g reater than ANGLE_RPT.
0 : Disable
Rang
ge : 1 ~ 179
RPT_TY
YPE
String
Set the
t type of reporting.
0: FIF
FO : First in First Out.
1: LIF
FO : Last In First Out.

[comm
mand] SA200RPT;850000;02;180;120;6
60;3;0;0;0;0;0
0;0;0
[respon
nse] SA200R
RPT;Res;850000;010;180;1
120;60;3;0;0;0
0;0;0;0;0

** If report interrval is set big numb er, network
k may disco
onnect GPR
RS connectiion because
e GPRS
unication is not progresssed for a lo
ong time. So, unit may not receivee command by GPRS. T4
T is for
commu
protectting against this disconn
nection by seending shorrt data with short term.
** Alive
e report can be sent only when the device has no data to send
during T4 interval.
4-3. Ev
vent Parameter Settin
ng
ST3440LC User Manual
HD
DR
DE
EV_ID
VER
IGNITIO
ON
T1
T2
IN1_T
TYPE
IN2
2_TYPE
IN3_TYPE
IN1_CHA
AT
IN2_CHAT
IN
N3_CHAT
OUT1__TYPE
OUT
T2_TYPE
OU
UT1_ACTIVE
OUT2_ACT
TIVE
PULSE1
1_NO
PULS
SE1_ON
PULSE1_OFF
PULSE2_N
NO
PULSE
E2_ON
PULLSE2_OFF
IN4_T
TYPE
IN5
5_TYPE
IN4_CHAT
IN5_CHA
AT
BA
AUD
● Defin
nition
: Set
S paramete
er related evvent.
Field
Definitions
HDR
“SA200E
EVT”
DEV_ID
VER
U nit
Rem
mark
Com
mmand type
6 cha
ar.
Device ID
“02””
Proto
ocol Version
T1
String
S ec
Delay for enterin
ng idle modee after ignitiion goes to off
T2
String
S ec
Delay for enterin
ng active mo
ode after ign
nition goes to
t on
IN1_TY
YPE
‘0’ ~ ‘7’
0 = Falling Edge
1 = Rising Edge
2 = Both Edge (Falling & Rissing)
3 = Panic Button
4 = Call1 Button
5 = Call 2 Button
6 = Reserved
7 = Anti-Theft
Button
13 = Disable Immobilizerr if it’s acttivated by jammer
detector.
ault = ‘3’.
Defa
Only
y the device that includ
ded voice op
ption (audio
o circuit)
can be set to ‘Ca
all1 Button’ o
or ‘Call2 Buttton’.
IN1_CH
HAT
String
100
0ms
Input1 chattering
g time.
ge : 0 ~ 9999
Rang
Defa
ault = 3 sec.
If 0, input1 is no
ot checked.
ST3440LC User Manual
OUT1_T
TYPE
‘0’ ~ ‘5’
0 = GPIO
1 = immobilizer
& Auto actiive
2 = Immobilizer
Auto
active
mean
ns
immobilizer
is
activated
automatically
when
the veh
hicle starts p
parking.
3 = Pulse
7-2-3.
4 = LED Out for indicating ccall status. Refer
5 = Buzzer
OUT1_A
ACTIVE
‘0’ or ‘1’
0 = Open when out1 is activve
is activve
1 = GND when out1
PULSE1
1_NO
String
Pulse
e number when out1 typ
pe set to pu
ulse.
Rang
ge : 0 ~ 9999
If pu
ulse no is 9999, pulsing rruns perman
nently.
PULSE1
1_ON
String
100
0ms
Activve time of pu
ulse1
Rang
ge : 0 ~ 9999
It should be set with even n
number.
PULSE1
1_OFF
String
100
0ms
Inacttive time of pulse1
Rang
ge : 0 ~ 9999
It should be set with even n
number.
BAUD
‘0’ ~ ‘4’
It’s available
whe
en extra eve nts support RS232.
Baud
d-rate
0 = No use
1 = 4800bps
2 = 9600bps
3 = 19200bps
4 = 38400bps
5 = 115200bps
e device doe
es not suppo
ort RS232, itt should be 0.
If the
ST3440LC User Manual

[comm
mand] SA200EVT;850000;02;1;60;0;3;2
2;2;30;20;20;1
1;0;1;0;0;0;0;0
0;0;0;0;0;0;0;00
[respon
nse] SA200EVT;Res;850000;010;1;60;0
0;3;2;2;30;20;20;1;0;1;0;0;0;0;0;0;0;0;0;;0;0;0

** If IG
GNITION is set to ‘0’, device doesn
n’t check driving or parrking state o
of the vehicle. It reports status
string with idle mode always, and cannott support pa
arking lock and the serrvice that en
nters sleep or
o deep
automaticallyy when the vehicle
is paarked.
sleep a
** If IG
GNITION is set
s to ‘2’, the device ch ecks driving
g or parking state of thee vehicle witth voltage range
of
vehicle
e’s battery. We
W named it
i as ‘Virtua l Ignition’. Virtual
ignition can opeerate when the
device installed
into re
eal vehicle and it may be
b need adju
ustment of voltage rang
ge for speciial vehicle. For
F setting method,
please refer 6.3.
ase of pulse,,
** In ca
pulse time may have tolerance about dozenss of ms.
** Imm
mobilizer, LED
D Blink line and
Buzzer ttype cannot set both OU
UT1 and OUTT2 simultane
eously.
** In ca
ase that a evvent is set to
o “door senssor”, active state
means door is opeened.
** If de
evice has the
e Handsfree kit, each timee the volume upp button is presssed once, the sppeaker volume is
i turned up as below.
0 -> 1 -> 2 -> 3 -> 4 ->
>5 ->0 -> 1 --> 2 ->3 -> 4 -> 5 - > 0 -> 1 -> ….
(0 : Volume
e mute, 5 :Maxx Volume)
Type of no supporte
ed event line
e is fixed to “No Use”.
able is for exxample of 4 line event m
model.
Below ta
Field
Definitions
HDR
“SA200E
EVT”
DEV_ID
VER
IGNITIO
ON
U nit
Rem
mark
Com
mmand type
6 cha
ar.
Device ID
“02””
Proto
ocol Version
‘0’ ~ ‘2’
Ignittion using state
0 : Not
N use ignition
1 : Use
U ignition Line
2 : Virtual
ignitio
on(power)
3 : Virtual
ignitio
on (motion)
T1
String
S ec
Delay for enterin
ng idle modee after ignitiion goes to off
T2
String
S ec
Delay for enterin
ng active mo
ode after ign
nition goes to
t on
10
ST3440LC User Manual
IN1_TY
YPE
‘0’ ~ ‘5’
0 = Falling Edge
1 = Rising Edge
2 = Both Edge (Falling & Rissing)
3 = Panic Button
4 = Call1 Button
5 = Call 2 Button
6 = Reserved
7 = Anti-Theft
Button
13 = Disable Immobilizerr if it’s acttivated by jammer
detector.
Defa
ault = ‘3’.
Only
y the device that includ
ded voice op
ption (audio
o circuit)
can be set to ‘Ca
all1 Button’ o
or ‘Call2 Buttton’.
IN1_CH
HAT
String
100
0ms
Input1 chattering
g time.
Rang
ge : 0 ~ 9999
Defa
ault = 3 sec.
If 0, input1 is no
ot checked.
OUT1_T
TYPE
OUT1_A
ACTIVE
‘7’
7 = No Use
‘0’ or ‘1’
PULSE1
1_NO
‘0’
PULSE1
1_ON
‘0’
PULSE1
1_OFF
‘0’
BAUD
‘0’
0 = No use

[comm
mand] SA200EVT;850000;02;1;60;0;3;2
2;2;30;20;20;1
1;0;1;0;0;0;0;0
0;0;0;0;0;0;0;00
[respon
nse] SA200EVT;Res;850000;010;1;60;0
0;3;8;8;30;0;0
0;6;6;1;0;0;0;0
0;0;0;0;8;8;0;00;0

** In ccase of even
nt 4 line model, IN2_TY
YPE, IN3_TY
YPE, IN4_TYP
PE, IN5_TYPEE, OUT1_TYPE and OUT
T2_TYPE
should be ‘No Use
e’.
Type and chat time
e of non use
ed event linees are set to
o ‘No Use’ and ‘0’ autom
matically alth
hough these filed of
and is set to
o other value
e.
comma
4-4. GS
SM Parame
eter Setting
HD
DR
DEV_ID
VE R
SM
MS_LOCK
SMS_MT1
SMS_MT
T2
SMS__MT3
11
ST3440LC User Manual
SMS__MT4
IN
N_CALL_LOCK
CALL__MO1
CALL_MO2
nition
● Defin
Definitions
HDR
“SA200GS
SM”
VER
SMS_LO
OCK
CA
ALL_MT2
CALL_MT3
CALL_MT
T4
CALL__MT5
: Set
S paramete
ers related S
SMS or Call.
Field
DEV_ID
CALL__MT1
Unit
Remark
Command
ty
ype
6 char.
Device
ID
“02”
Protocol
Version
‘0’ or ‘1
1’
Lock
of Rece
eiving Comm
mands by SM
MS
Disable
(0) / Enable (1)
If
enabled,
only
com
mmands
th
hat
receivess
from
SMS_MT1
~ MT3 numbeer can be acccepted.
SMS_M
MT1
String
Up to
o 20 char.
Phone
numb
ber for SMS commands
SMS_M
MT2
String
Up to
o 20 char.
Phone
numb
ber for SMS commands
SMS_M
MT3
String
Up to
o 20 char.
Phone
numb
ber for SMS commands
SMS_M
MT4
String
Up to
o 20 char.
Phone
numb
ber for SMS commands
IN_CALLL_LOCK
‘0’ or ‘1
1’
Lock
of Incoming Call
Disable
(0) / Enable (1)
If
I enabled, only call fro
om CALL_MT1 ~ MT5 number
can
c be accep
pted.
CALL_M
MT1
String
Up to
o 20 char.
Phone
numb
ber for call
CALL_M
MT2
String
Up to
o 20 char.
Phone
numb
ber for call
CALL_M
MT3
String
Up to
o 20 char.
Phone
numb
ber for call
CALL_M
MT4
String
Up to
o 20 char.
Phone
numb
ber for call
CALL_M
MT5
String
Up to
o 20 char.
Phone
numb
ber for call
CALL_M
MO1
String
Up to
o 20 char.
Phone
numb
ber for outgo
oing call from device
CALL_M
MO2
String
Up to
o 20 char.
Phone
numb
ber for outgo
oing call from device

[comm
mand] SA200GSM;850000
0;02;0;;;;;0;;;;;;;;
[respon
nse] SA200G
GSM;Res;8500
000;010;0;;;;;0
0;;;;;;;

** Whe
en SMS or Call
C numbers are not set,, that field should be em
mpty.
4-5. Se
ervice Param
meter Setting
12
ST3440LC User Manual
HDR
DEV_ID
VEER
PARKING_LO
CK
SPEED
D_LIMIT
PW
WR_DN
CON_TYPE
ZIP
GROUP_SEND
MP_C
CHK
ANT_CHK
BAT__CHK
M__SENSOR
CALL
GEO__FENCE
DATA_LOG
ANTITHFFT_CNT1
ANTITHFT_CN
NT2
JAM _DET
JAM_CHK_DIST
JA
AM_CHK_TM
nition
● Defin
: Set
S paramete
ers related reeport.
Field
Definitions
HDR
“SA200S
SVC”
DEV_ID
VER
PARKIN
NG_LOCK
U nit
Rem
mark
Com
mmand type
6 cha
ar.
Device ID
“02””
Proto
ocol Version
‘0’ or ‘1’
Parkiing lock ena
able (1) / dissable (0)
If 1,
1 the device checks vehicle po
osition in parking
perio
odically. Whe
en the vehiccle goes off some boun
ndary or
starts moving over some velocity, the
device reports
parking lock emergency.
SPEED__LIMIT
String
Km
m/h
Overr speed limitt
If 0, the device does
not cheeck over spe
eed.
ehicle runes over prede
efined value,, device
If 1 and the ve
orts speed alerts once.
repo
PWR_D
DN
‘0’ ~ ‘2’
Powe
er saving typ
pe
0 : Disabled
slee
ep and deep sleep servicce
1 : Enabled deep
p sleep
2 : Enabled sleep
CON_T
TYPE
‘0’ ~ ‘2’
Conn
nection Type
e with Serve r
0 = KEEP_CON
ON
1 = KEEP_DISCO
2 = KEEP_NOP
ail explanatio
on is below.
Deta
ZIP
‘0’ or ‘1’
Use Zip
able (1)
Disable (0) / Ena
GROUP
P_SEND
‘0’ or ‘1’
Grou
up Send for stored data
0 : Disable
1 : Enable. One packet
can i nclude up to
o 5 reports.
up send is ex
xplained bel ow.
Grou
13
ST3440LC User Manual
MP_CH
HK
‘0’ or ‘1’
Main
n Power Disc
connection C
Check
Disable (0) / Ena
able (1)
ANT_CHK
‘0’ or ‘1’
GPS Antenna Co
onnection Errror Check
able (1)
Disable (0) / Ena
BAT_CH
HK
‘0’ or ‘1’
Back
kup Battery Error
Check
Disable (0) / Ena
able (1)
M_SEN
NSOR
CALL
‘0’ ~’’4’
‘0’ or ‘1’
Motiion Sensor
Motion
Collision
Shock
Disable
Disable
Disable
Enable
Disable
Disable
Disable
Disable
Enable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Enable
Disable
Disable
Enable
Enable
Enable
Enable
Enable
Supp
port Call with headset
Disable (0) / Ena
able (1)
GEO_FE
ENCE
‘0’ or ‘1’
Supp
port Geo-fen
nce
Disable (0) / Ena
able (1)
DAT_LO
OG
‘0’ or ‘1’
Log out with RS2
232
0 = No Use
g data by RS
S232
1 = Enable getting saved log

[comm
mand] SA200SVC;850000;;02;1;120;0;0
0;0;0;1;1;1;0;0
0;0;0;0;0;0;0;0
[respon
nse] SA200SVC;Res;8500
000;010;1;120
0;0;0;0;0;1;1;1
1;0;0;0;0;0;0;0
0;0;0

** Funcction of M_S
SEMSOR can
n be used wiith the mode
el that has motion
senso
or.
If sh
hock or colliision detection is enableed, device will report to server when
n gets any shock or colliision.
** If tthis parame
eter has bee
en customizzed, This ta
able should be disregaarded and you should
d follow
custom
mized
operration docum
ment.
CON_T
TYPE
1.
KEEP_CON
N : The devicce keeps TCP
P connection
n always and
d can receivees a comman
nd by GPRS..
2.
KEEP_DISC
CON : The de
evice conneccts TCP conn
nection when the data iss sent. Afterr sending, th
he
device discconnects GP
PRS and TCP
P connection if it estimattes there is n
no data for sending with
hin
14
ST3440LC User Manual
3minutes. In this case, it cannot reeceive a com
mmand by GPRS.
3.
P : The device doesn’t seend any repo
ort after be installed. Wh
hen the device enters
KEEP_NOP
emergencyy mode or receive ‘Startt Report’ com
mmand by SMS
or RS2332, it starts report
depen
nding
on report parameters. It may be u
used for saviing GPRS fee
e. Current veersion canno
ot support th
his
option.
Group Send
The de
evice stores data if the vehicle is in
n no GPRS area. And, the
vehicle moves to GPRS
availab
ble area,
device starts sending stored data.
ed, the devicce makes 5 reports
to on
ne bundle a nd send the
ese 5 reportss at one
If group send option is enable
time.
Group send is usefful to speed up sending .
nsor
M_Sen
1.
Collision: The
T device sending
a evvent when ig
gnition is ON
N and have a motion.
2.
Shock: The
e device sen
nding a even
nt when ignittion is OFF and
a have a m
motion.
Jammiing detectio
on procedurre
JAM_CHK_DIST & JAM_CHK_TM
M are assisst for jammin
ng detection
n to avoid faalse detection.
At leasst, we recommend use JA
AM_CHK_DIS
ST for safety
y.
If you use two assiist functions, it can deteect two case of jamming as follows.
*Case o
of jamming GPRS only.
Jammin
ng detected -> JAM_CHK_DIST -> JA
AM_CHK_TM
M -> Triggered by JAM_D
DET mode.
*Case o
of jamming GPRS & GPS
S.
Jammin
ng detected -> JAM_CHK_TM -> Triiggered by JAM_DET mo
ode.
JAM_CHK_DIST : if 0, skip this function.
JAM_CHK_TM : if 0,
0 skip this fu
unction.
If disab
ble all of asssist functionss, just triggeered by HAM
M_DET mode after detectted jamming
g.
In this case, it’s possible to falsse detection
n in weak GS
SM or strong
g radio area.
4-6. Ad
dditional Pa
arameters
HDR
DEV_ID
nition
● Defin
VE
ER
SVR_TYPE
B_SVR_TTYPE
UDP__ACK
DEV__PORT
: Setting
addittional param
meter requestted.
15
ST3440LC User Manual
Field
Definitions
HDR
“SA200A
ADP”
DEV_ID
VER
SVR_TY
YPE
6 cha
ar.
“02””
‘T’ / ‘U’
Un
nit
Remarrk
Comm
mand type
Device
e ID
Protocol Version
Server Protocol Type
T : TCP
U : UD
DP
B_SVR__TYPE
‘T’ / ‘U’
Backup
p Server Protocol Type
T : TCP
U : UD
DP
UDP_A
ACK
‘0’ ~ ‘3’
ACK from Server when
UPD iss used.
0 : No use
K when the server receivves reports except
alive.
1 : ACK
2 : ACK
K when the server receivves reports except
STT
and
d alive reporrt.
3 : ACK
K when the server receivves emergen
ncy report.
Comm
mand responsse doesn’t n
need ACK.
DEV_PO
ORT
String
Device
e’s port for re
eceiving com
mmand from
m UDP server.
It can be used only when UDPP server is used.
e device wou
uld use port 9000.
If ‘0’ or empty, the
If not zero, the device can receive commands with port
DEV_PORT.
Reserve
ed
‘0’
Reserve
ed
‘0’
Reserve
ed
‘0’
Reserve
ed
‘0’
Reserve
ed
‘0’
Reserve
ed
‘0’

[comm
mand] SA200A
ADP;850000;02;U;T;2;900
00;0;0;0;0;0;0
[respon
nse] SA200
0ADP;Res;850
0000;022;U;TT;2;9000;0;0;0
0;0;0;0

This co
ommand can
n be applied from softwaare version 22.
n case of UD
DP
ACK in
16
ST3440LC User Manual
UDP iss protocol that
doesn’tt check wheether the da
ata is transm
mitted succeessfully. So, the device checks
comple
etion of send
ding with AC
CK dependin
ng on UDP_A
ACK type.
ACK is sent by servver when the data is recceived.
If the A
ACK is not sent during more than 2 minutes after
sending, the devicce recognize
es the data was
w not
reached to server and
sends th
he data aga in.
Examp
ples of ACK report are as
a below.
String Format : “SA
A200ACK;850000”
Zip Forrmat : 0x15 0x85 0x00 0x00
It is reccommended
d ACK_TYPE is set to ‘1’ tto confirm all
a data can be transmittted safely.
UDP_AC
CK=0
U DP_ACK=1
UDP_ACK=2
UD
DP_ACK=3
Alive
STT
Event, Alert, Etc.
Emerg
gency
Reporrt Type
4-7. Se
et Paramete
ers of Main
n Voltage
HDR
DEV_ID
VER
CHR_STOP__THRES_12
OPE
ERATION_STO
OP_THRES_1
12
● Defin
nition
CHR__STOP_THRESS_24
OPERATION_S
STOP_THRES
S_24
Defin
nitions
Re
emark
HDR
“SA20
00MBV”
Co
ommand type
VER
IGNDET_LL
: Set
S some value of main vvoltage.
Field
DEV_ID
IG
GNDET_H
DECIDE_B
BAT_24
6 cchar.
“0
02”
De
evice ID
Pro
otocol Versio
on
17
ST3440LC User Manual
CHR_ST
TOP_THRES__12
Strring
Vo
oltage value to stop baackup batterry charging in 12V
vehicle.
CHR_ST
TOP_THRES__24
Strring
Vo
oltage value to stop baackup batterry charging in 24V
vehicle.
DECIDE
E_BAT_24
Strring
Vo
oltage value to check w
whether the vehicle’s ba
attery is
12V or 24V.
OPERA
ATION_STOP__THRES_12
Strring
Vo
oltage value to protect veehicle batterry.
The device operation stop
ps if car battery voltage is lower
tha
an this value
e in vehicle tthat has 12V
V power.
OPERA
ATION_STOP__THRES_24
Strring
Vo
oltage value to protect veehicle.
The device operation stop
ps if car battery voltage is lower
an this value
e in vehicle tthat has 24V
V power.
tha
on, the veh
hicle can re
ecognize
In case of virtual ignitio
IGNDET
T_H
driiving
Strring
state
when
veehicle
powe
er
is
more
than
IGN
NDET_H.
De
efault = ‘0’
IGNDET
T_L
Strring
In case of virtual ignitio
on, the veh
hicle can re
ecognize
vehiclee power is le
ess than IGN
NDET_L.
parking state when
efault = ‘0’
De

[comm
mand] SA200MBV;850000
0;02;10.5;22;1
19;8.00;18.00
0;0;0
[respon
nse] SA200M
MBV;Res;8500
000;122;10.5
5;22;19;8.00;1
18.00;0;0

IGNDET
T_H and IGN
NDET_L are ‘0’, device ch
heck parking
g and driving
g automaticaally.
4-8. Se
et Paramete
ers of Motion Sensorr
HDR
DEV_ID
VER
CHR_STOP__THRES_12
OPE
ERATION_STO
OP_THRES_1
12
Field
OPERATION_S
STOP_THRES
S_24
VI_ON_THRES
VI_ON_DELLAY
VII_OFF_DELAY
VI_OFF_PERC
CENT
nition
● Defin
CHR__STOP_THRESS_24
VI_ON_PE
ERCENT
DECIDE_B
BAT_24
IG
GNDET_H
IGNDET_LL
VI_OF
FF_THRES
: Set
S motion sensor
param
meters
Definitions
Un
nit
Remarrk
18
ST3440LC User Manual
HDR
DEV_ID
VER
SHOCK
K_DELAY
“SA200M
MSR”
Comm
mand type
6 cha
ar.
Device
e ID
“02””
Protocol Version
String
Se c.
Delay for entering shock detecction mode after ignition off
0 – Dissable
Range : 1 ~ 21600
0 (5hour)
mmend : 600 ( 10 min.)
Recom
MOTIO
ON_THRES
String
Steep
Detecttion level of shock violattion.
Range : 0.04 ~ 2.0
mmend : 0.04
Recom
SHOCK
K_THRES
String
Steep
Detecttion level of shock violattion.
Range : 0.04 ~ 2.0
mmend : 0.04
Recom
COLL_T
THRES
String
Steep
Gravity
y for collision report.
Range : 0.1 ~ 2.0
mmend : 0.7
Recom
VI_ON__THRES
String
1/25 5G
Thresh
hold value fo
or Motion Vi rtual Ignition On
Range : 3~50
Default : 5
VI_ON__DELAY
String
Sec.
Delay time
for Motion Virtual Ignition On
Range : 3~999
Default : 10
VI_ON__PERCENT
String
Percen
nt for Motion
n Virtual Ign
nition On.
Range : 30~100
Default: 70
VI_OFFF_THRES
String
1/25 5G
Thresh
hold value fo
or Motion Vi rtual Ignition Off
Range : 3~50
Default : 5
VI_OFFF_DELAY
String
Sec.
Delay time
for Motion Virtual Ignition Off
Range : 3~999
Default : 10
VI_OFFF_PERCENT
String
Percen
nt for Motion
n virtual Igniition Off.
Range : 30 ~ 100
Default : 70

[comm
mand] SA200MSR;;02;600
0;0.04;0.04;0.7
7;5;10;70;5;10;70
[respon
nse] SA200M
MSR;Res;8525
588;128;600;;0.04;0.04;0.7
70;5;10;70;5;1
10;70
19
ST3440LC User Manual

* For tthe shock le
evel, we reccommend itt to set to 0.04. if it's over
than 0.04, the se
ensor will be
b more
insensitive
as it fo
or shock dete
ection.
4-11. C
Control Com
mmand
HDR
● Defin
nition
DEV
V_ID
VER
CMD_ID
: Controls
som
me functions .
Field
Definitions
HDR
“SA200C
CMD”
DEV_ID
Un
nit
Comm
mand type
6 cha
ar.
VER
Device
e ID
‘01’’
CMD_ID
Remark
Protoccol Version
String
Contro
ol command
d content
Caution
n : If it’s nott correct the
e Unit ID, ig
gnored.
4-11-1.. Status Re
equest
● Defin
nition
: Location
polll, request off the status report.
Field
Definitions
CMD_ID
“StatusR
Req”
Un it
Remark
Statuss request
If rece
eived, the de
evice sends sstatus string instantly.


[comm
mand] SA200CMD;850000
0;02;StatusReeq
[respon
nse] SA200STT;850000;010;20090724
4;07:12:16;00
0129;+37.479
9995;+126.8885815;000.0
029;000.00;
7;1;0
0;15.33;10000
00;2;0002
4-11-2.. Reset
20
ST3440LC User Manual
● Defin
nition
: Reset
all of parameters.
Field
Definitions
CMD_ID
Un it
“Resett”
Remark
Reset
Initialize all param
meters with factory value and reboot the
device
e.

[comm
mand] SA200CMD;850000
0;02;Reset
[respon
nse] SA200
0CMD;Res;85
50000;010;Reeset
4-11-3.. Preset
● Defin
nition
Field
: Reset
all of parameters.
Definitions
CMD_ID
Un it
“Prese
et”
Remark
Reporrt parameter setting valu
ues and current device status.
Respo
onse includes network, rreport, event, GSM and service
param
meters. It includes status of device, also.

[comm
mand] SA200CMD;850000
0;02;Preset
[respon
nse] SA200C
CMD;Res;850000;010;Presset;
111;8600;;;;1234;
NTW;;0;internet;;;1
111.111.111.1
RPT;6
60;180;120;60
0;3;0;0;;;;
EVT;1
1;60;0;3;2;2;30
0;20;20;1;1;1;;0;0;0;0;0;0;0;0;0;0;0;0;
GSM;0;;;;;0;;;;;;;;
SVC;1
1;120;0;0;0;0;1;1;1;0;0;0;0
DEV;0
0;0;0;0
[respon
nse] event 4 line model
111;8600;;;;1234;
111.111.111.1
NTW;;0;internet;;;1
RPT;6
60;180;120;60
0;3;0;0;;;;
EVT;1
1;60;0;3;8;8;30
0;0;0;6;6;1;0;0
0;0;0;0;0;0;0;0
0;0;0;0;
GSM;0;;;;;0;;;;;;;;
1;120;0;0;0;0;1;1;1;0;0;0;0
SVC;1
DEV;0
0;0;0;0
21
ST3440LC User Manual

** Afte
er power on, device send
ds response string of pre
eset once.
** DEV
V filed inform
ms current status of devi ce as below
w.
OUT1
OUT2
PWR_DN
0 = Disable
0 = Disable
0 = Normal
1 = Enable
1 = Enable
1 = Sleep
2 = Deep sleep
Field
Definitions
CMD_ID
Un it
BAT__CON
Backu
up
battery
is
disco
onnected.
1 = Backup
batteery is connected.
Remark
“PresettA”
Reporrt all parame
eters includin
ng additiona
al parameter.r.

[comm
mand] SA200CMD;850000
0;02;PresetA
[respon
nse] SA200C
CMD;Res;850000;010;PressetA;
NTW;;0;internet;;;1
111.111.111.1
111;8600;;;;1234;
RPT;6
60;180;120;60
0;3;0;0;;;;
EVT;1
1;60;0;3;2;2;30
0;20;20;1;1;1;;0;0;0;0;0;0;0;0;0;0;0;0;
GSM;0;;;;;0;;;;;;;;
1;120;0;0;0;0;1;1;1;0;0;0;0;
SVC;1
ADP;U
U;T;2;9000;0;0;0;0;0;0;
DEV;0
0;0;0;0;0;0;0;0

** Thiss command can be app
plied from s oftware verrsion 22.
** DEV
V filed inform
ms current status of devi ce as below
w.
OUT1
OUT2
PWR_DN
0 = Disable
0 = Disable
0 = Normal
1 = Enable
1 = Enable
1 = Sleep
2 = Deep sleep
TRACKING
Antii-Theft
0 = Stop Trackin
ng
0 = Dissable
1 = Start Trackin
ng
1 = Ena
able
Reserve
ed
BAT__CON
Backu
up
battery
is
disco
onnected.
1 = Backup
batteery is connected.
Resserved
22
ST3440LC User Manual
4-11-4.. ACK of Em
mergency
● Defin
nition
: Stop
emerge
ency report.
Field
Definitions
CMD_ID
“AckEme
erg”
Un it
Remark
Ackno
owledgement of emergeency report.
The device will sto
op emergen
ncy reports if it is in emergency
state.

[comm
mand] SA200CMD;850000
0;02;AckEmeerg
[respon
nse] SA200C
CMD;Res;850000;010;AckkEmerg
4-11-5.. Enable1
● Defin
nition
: Active
Outpu
ut1.
Field
Definitions
CMD_ID
Un it
“Enable
e1”
Remark
Enable
e Output1

[comm
mand] SA200CMD;850000
0;02;Enable1
[respon
nse] SA200C
CMD;Res;850000;010;Ena ble1
[respon
nse] SA200C
CMD;Res;850000;010;Ena ble1NoUse (in case thatt IN type is sset to ‘No Use’).

** Outp
put1 line go
oes to active status.
** If OU
UT1 set with
h immobilize
er, output1 liine goes to active statuss gradually w
with pulse in
n driving mode.
** If O
OUT1 set witth pulse typ
pe, output1 line genera
ates pulse an
nd returns iinactive statte after pulssing out
automa
atically.
4-11-6.. Disable1
● Defin
nition
: Inactive Outp
put1.
23
ST3440LC User Manual
Field
Definitions
CMD_ID
“Disable
e1”
Un it
Remark
Disablle Output1

[comm
mand] SA200CMD;850000
0;02;Disable1
[respon
nse] SA200C
CMD;Res;850000;010;Disaable1
[respon
nse] SA200C
CMD;Res;850000;010;Disaable1NoUse (in case that IN type is set to ‘No Use’).

** Outp
put1 line go
oes to inactiv
ve status.
4-11-9.. Request IMSI
● Defin
nition
: Request
the unique SIM ID.
Field
Definitions
CMD_ID
Un it
“ReqIM
MSI”
Remark
Reque
est IMSI (unique SIM ID))
If rece
eived, device
e sends IMSII of using SIM
M.

[comm
mand] SA200CMD;850000
0;02;ReqIMSII
[respon
nse] SA200C
CMD;Res;850000;010;Req
qIMSI;724031
1111553779
4-11-10
0. Requestt ICCID
● Defin
nition
: Request
the ICCID.
Field
Definitions
CMD_ID
“ReqICC
CID”
Un it
Remark
Reque
est ICCID (sequence num
mber that is displayed on
n SIM)
If rece
eived, device
e sends ICCID
D of using SIM.

[comm
mand] SA200CMD;850000
0;02;ReqICCIID
[respon
nse] SA200C
CMD;Res;850000;010;Req
qICCID;89550
02300000842
256668
4-11-11
1. ReqVer
● Defin
nition
: Request
softw
ware version
n.
24
ST3440LC User Manual
Field
Definitions
CMD_ID
Un it
“ReqVe
er”
Remark
Reque
est device ve
ersion
Device
e reports Model,
Buyeer, Protocol and S/W release
version.

[comm
mand] SA200CMD;850000
0;02;ReqVer
[respon
nse] SA200C
CMD;Res;850000;010;Req
qVer;SA200E__SAMPLE_STBASE_001
4-11-12
2. Erase All
● Defin
nition
Field
CMD_ID
: Erase
all of data
in buffeer.
Definitions
Un it
“EraseA
All”
Remark
Erase saved all rep
ports and diisable outpu
uts.
This iss needed to initialize jusst before de
evice is delivvered to
a custtomer.

[comm
mand] SA200CMD;850000
0;02;EraseAll
[respon
nse] SA200C
CMD;Res;850000;010;ErasseAll
4-11-13
3. Initialize
e Traveled Distance
nition
● Defin
Field
CMD_ID
: Initialize the travel distan
nce.
Definitions
Un it
“InitDisst”
Remark
Set tra
aveled distan
nce to 0.

[comm
mand] SA200CMD;850000
0;02;InitDist
[respon
nse] SA200C
CMD;Res;850000;010;InitD
Dist
4-11-14
4. Initialize
e Message Number
● Defin
nition
: Initialize the message se quence num
mber.
25
ST3440LC User Manual
Field
Definitions
CMD_ID
“InitMsg
gNo”
Un it
Remark
Set message number to 0.

[comm
mand] SA200CMD;850000
0;02;InitMsg No
[respon
nse] SA200C
CMD;Res;850000;010;InitM
MsgNo
4-11-23
3. Reboot
● Defin
nition
Field
CMD_ID
: reboot
unit.
Definitions
Un
nit
“Reboot””
Remark
Reboo
ot device.

[comm
mand] SA200CMD;850000
0;02;Reboot
[respon
nse] SA200C
CMD;Res;850000;010;Reb
boot
4-11-24
4. Requestt SIM IP Ad
ddress
● Defin
nition
Field
CMD_ID
: Request
of th
he local IP aaddress in SIM card.
Definitions
Un
nit
“ReqSIMIIP”
Remark
SIM ca
ard IP reque
est

[comm
mand] SA200CMD;850000
0;02;ReqSIMIIP
[respon
nse] SA200C
CMD;Res;850000;010;Req
qSIMIP;172.16.18.6
26
ST3440LC User Manual
3. Installation
3.1 Inse
ert SIM card
d.
3.2 Asse
emble as be
elow
Event Ca
able Color pin
p Descripttion
27
ST3440LC User Manual
Red: VC
CC (12V)
Black: G
Ground
White: IInput1. Panicc Button
When
n Input1 goe
es to GND, th
hen ST340LC
C change Em
mergency mo
ode.
It repo
orts emerge
ency string by
b mode 1 in
n Emergency
y mode such
h that
SA200
0EMG;85000
00;20081017;07:41:56;001
100;+37.478519;+126.886819;000.0112;000.00;9;1;0;15.30;
11000
00;1
Orange:: Output1.
Immobilizer activatio
on behaves progressive blocking wh
hen vehicle is
i driving.
am is as belo
ow.
The progressive blocking diagra
obilizer increeases 90mss each 4s. After 3minu
utes, immobilizer is
The acttive time off the immo
activated
d continuously.
one of outpu
ut is dedicate
ed to PULSE,, it operates as below.
When o
or activation
n and deacttivation is cconfigurable by PULSE_ON and PU
ULSE_OFF in
n Service
Time fo
Parametter.
Pulse tim
me may have tolerance about dozen
ns of millisecconds.
Active and inactive state is decided by outp
put line num
mber.
put 1 is open
n(Hi-Z) and active state of output 2 is ground.
Active sttate of Outp
RS operation
n and batte
ery charger operation with
LEDs.
3.6 Check GPS/GPR
It takes 3~10 minuttes for GPS connected.
n: Direction of ST340LC
C is very imp
portant whe
en installed in the vehiicle. Make sure
that
Caution
top side
e of ST340L
LC
28
ST3440LC User Manual
4. Trou
uble Shoo
oting (LED Indicatorr)
4.1 Blue
e LED: Indicates GPRS status.
GPRS
Blink Coun
nt
Norma
al
Server Com. Error
Remarkss

1. Serveer or network
k parameter is wrong.
2. Serveer is closed.
3. Temp orary netwo
ork barrier
GPRS C
Com. Error

1. Netwo
ork parametter is wrong.
2. SIM iss blocked ab
bout GPRS using.
3. Temp orary netwo
ork barrier
4. Weakk GPRS signa
al
5. GPRS antenna co
onnection is not firm.
No Network

1. GPRS antenna is disconnected.
2. GPRS antenna or socket of GPRS antennaa is broken.
3. Devicce is broken.
SIM PIN Locked

PIN is enable
ed.
1. SIM P
Cannott
Attach
h 6
NW

al.
1. Weakk GPRS signa
2. GPRS antenna co
onnection is not firm.
No SIM

o SIM is nott inserted prroperly.
1. Theree is no SIM or
2. SIM o
or SIM socke
et is broken.
29
ST3440LC User Manual
4.2 RED
D LED: Indica
ates GPS sta
atus.
GPS
Blink Cou
unt
Norma
al
No Fix
Rema rks

1. If p
power on, GPS
chipsett is trying tto find position during
some minutes.
S antenna la
ays on weak or no GPS ssignal positio
on
2. GPS
3. GPS
S antenna co
onnection is not firm.
GPS Ch
hipset Error
GPS An
ntenna Errorr

1. GPS
S antenna iss disconnecte
ed.
2. GPS
S antenna or socket of GPS
G antennaa is broken.
3. Uniit is broken.
The device complies with
Part 15 of the FCC Rules. Opera
ation is subjject to the following
two conditiions:
(1) this de
evice may no
ot cause harrmful interfe
erence, and (2) this devvice must accept any
interferencce received, including intterference th
hat may cause undesired
d operation.
This equip
pment has be
een tested aand found to
o comply witth the limitss for a Class B digital
device, pu
ursuant to part
15 of the FCC Ru
ules. These limits are d
designed to provide
reasonable
e protection against harm
mful interfacce in a residential install ation.
Cautions
ons not expressly appro
oved by the party respon
nsible for co
ompliance co
ould void
Modificatio
the user’s authority to operate thee equipmentt.
FCC Radiattion Exposurre Statementt:
This equip
pment complies with FCC
C radiation exposure
lim
mits set forth
h for an unco
ontrolled
environme
ent. This equ
uipment sho
ould be insta
alled and operated with
h minimum distance
20cm betw
ween the rad
diator & you
ur body.
This transmitter mustt not be co
o-located orr operating in conjuncttion with an
ny other
antenna or transmitterr.
30
ST3440LC User Manual
NOTE : This equipm
ment has bee
en tested an
nd found to comply with the limits for a Class B digital
device, pursuant to
o Part 15 of
o the FCC Rules. These limits are
e frequency energy and
d, if not
installed
d and used in accordan
nce with thee instructions, may causse harmful i nterference to radio
commun
nications. However, therre is no guaarantee thatt interferenc
ce will not o
occur in a particular
installation.
If this e
equipment does
cause harmful
inte rference to radio or television receeption, which
h can be
determined by turn
ning the equ
uipment off and on, the user is en
ncouraged tto try to correct the
interfere
ence by one or more of the followin
ng measuress:
-- Reorie
ent or reloca
ate the receiving antenn
na.
-- Increa
ase the sepa
aration between the equ
uipment and receiver.
-- Conn
nect the equ
uipment into
o an outlet o
on a circuit different fro
om that to w
which the re
eceiver is
connectted.
-- Consu
ult the deale
er or an experienced rad
dio/TV techn
nician for help.
31
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : RICHARD
Create Date                     : 2014:11:20 12:30:36+09:00
Modify Date                     : 2014:11:20 12:30:36+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User Manual_ST340LC222
Creator                         : RICHARD
Document ID                     : uuid:27def627-735f-4520-8a70-e6821e87f214
Instance ID                     : uuid:69ec515a-f931-44c8-becd-b5c54b497514
Page Count                      : 31
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WA2ST340LC

Navigation menu