User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3062011 |
| Application ID | 87ZEzLxgS/EsidgPRIPOQg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 38.97kB (487118 bits) |
| Date Submitted | 2016-07-13 00:00:00 |
| Date Available | 2017-01-09 00:00:00 |
| Creation Date | 2017-12-10 00:25:40 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-10 00:25:40 |
| Document Title | Microsoft Word - User Manual_ST500 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | RICHARD |
ST500 User Manual Suntech International Ltd. ST5000 User Man nual 1. Intro oduction This doccument desccribes features, protocolss and detail operation of o ST500. If there is another operation description d document for special bu uyer to custo omize or mo odel and the conttents of the document is different w with this, cu ustomizing document sh hould be applied for special b buyer. 2. Ove erview Device cconsists of GPRS, GPS an nd event pa rts. The main purpose of device re eports gettin ng GPS position and other informs of vehicle to t server periodiccally. Device ccan control or o check con nnected line s and suppo ort additiona al functions. peration Mode 2-1. Op The devvice has 3 op peration mod des, driving, parking and d emergency y. ** Driv ving : Driv ving status w when ignition n is on. ** Park king : Park king status t hat starts if ignition is off o during mo ore than T1. ** Eme ergency : On nce panic bu utton is On o or any otherr status as pe er designed.. The d device sends emergency y reports un ntil A1 times or receiving g server ackn nowledge. 2-2. Re eport AVL reports GPS and some info ormation at p predefined interval, depending on th he current modes. Also, AV VL sends so ome alerts, for examp le, moveme ent at the parking con ndition, chan nging of connectted input line e and so on. es all reportts with “ tyypes, Status report, emergency, eveent, alert, alive and Device distinguishe nd response. comman Device ccan store re eports when n reporting route (For example, GP PRS conditio on) is not su uccessful. Storage capacity is up to 2,000 status rep ports, 50 em mergency re eports, 50 a lert reports (include eports) and 1500 bytes as comman nd response e. In case of status repo orts, oldest report is event re erased a and new rep port is bufferred when th e buffer is fu ull and new status reporrt enters (FIF FO). When re eporting con ndition is reccovered, devvice starts se ending all bu uffered repo rts. Also, thiis capacity can increase if it is needeed. Each typ pe of reportss has priority y, and priori ty is as belo ow. Emergen ncy Comm mand Respo onse Alertt Status Report Alive (Lowest) ST5000 User Man nual Emergen ncy is the firrst to be sen nt after recovvering GPRS S condition. 2-3. Se etting Param meter Parametters of devicce can be ch hanged by G GPRS or SMS, and some e control can n be realized d also in the sam me way. Detail protocols are described in Chapter 4 . 2-4. Features Key fea atures are described here; - Powerr Down Device can process two steps of powerr-down, Sleep and Deep Sleep, ffor reducing g power consumption when the vehicle is parked. - LED In ndicator LED indicates GPRS and GPS sta ates. It s help pful to check k error cause e. - Eventss Device h has 2 outputt lines, 3 inp put lines and d ignition line. - Updatte Firmware e by Over Th he Air (FOTA A) When FFirmware off device has some errror or has to be chan nged for a new servicce to be impleme ented, devicce can upda ate internal ROM file by b over the air (FOTA), remotely via v GPRS. Custome ers do not need to visit every vehic le to downlo oad the new w firmware. Method of FOTA de escribes at SunTech_OTA A_UA_Protoccol document in detail. - Parkin ng Lock Device ccan check whether the vehicle mo oves off the preset park king boundaary or startss driving without ignition on n. In the ca ase that it notes the unauthorize ed moving o or driving, it sends emergen ncy report im mmediately. - Over sspeed Device ccan check sp peed of vehicle and send d alert of ovver-speed to server. - GPS A Antenna Che ecking Device ccan alert when GPS ante enna is disco onnected. ST5000 User Man nual It s applicable only for f models that have extternal anten nna. - Main Power Checcking The devvice can re ecognize the e main pow wer and infform to serrver when main power line is disconnected or ma ain power drrops below p preset value. It s applicable only for f battery model. - Batterry Error Alerrt Device ccan alert abo out battery error related d on charging. It s applicable only for f battery model. 3. Prottocol Construction mand and re eports are sttring and fo llows below format. All comm Every filed is disting guished by semi colon. m device is ended by ＼ ＼r (0x0D). All report string from and message e format (frrom server tto device) Comma HDR DEV_ID VE ER Field 1 Field 2 Field Definition ns HDR String DEV_ID “ char. VER 02 Field 1 ~ n String … Field n Rema ark SA20 00 + Comm mand type Devicee ID of AVL Protoccol Version. This is fixed with 02 . Conteents Device IID is unique number of each device that consistts of “digits. If the co ommand has invalid value or DEV_I D of the command thatt is sent by GPRS or SM MS is not matched d with DEV_IID of the unit. ormat (from device to sserver) Report message fo HDR DEV_ID SW W_VER Field 1 Field Definition ns HDR String Field 2 … Field n Rema ark SA20 00 + Reportt type ST5000 User Man nual DEV_ID “ char. VER Devicee ID of AVL 001 Field 1 ~ n Softw are version that the dev vice has. String Conteents 4. Com mmands When the device iss received a command,, it respond ds with response string and changes some parametters or acts related operration. 4-1. Ne etwork Parrameters Se etting HDR DEV_ID B__SEVER_IP nition ● Defin VER AUTH B_SE EVER_IP Definitions HDR SA200N NTW VER AUTH USER R_ID SMS_NO USE ER_PWD SEVER_IP SEVER_PORT PIN_NO : Set S network parameters and PIN num mber. Field DEV_ID AP PN “ cha ar. 02 0 / 1 /A U nit Rem mark Com mmand type Device ID Proto ocol Version GPRS S authentication 0 : PAP( PA NO in Synctrack) 1 : CHAP( YES in n Synctrack) A : Automatic GP PRS set. In n this case, parameters iin APN, USER_ID and USER_PWD field should b be empty. APN String Acce ess Point Name USER_IID String ID fo or GPRS Access USER_P PWD String Passw word for GPRS Access SEVER__IP String Server IP Addresss SEVER__PORT String Server Port B_SEVE ER_IP String Back kup Server IP P Address B_SEVE ER_PORT String Back kup Server Port SMS_N NO String Phon ne number what the devvice sends SMS report to o. This can be used for backkup in the area that if GPRS dition is not good. Or,, it can be used main n report cond meth hod when IP P and Port arre empty. ST5000 User Man nual For no n use, it should be emp pty. PIN_NO String PIN Number to release PIN lock if it is enabled[comm mand] SA200NTW;‘50000 0;02;0;interneet;;;111.111.1 111.111;‘“00 0;;;; [respon nse] SA200N NTW;Res;‘50000;010;0;intternet;;; 111.111.111.111 1;‘“00;;;; SA200N NTW;Res;‘50000;010;A1;ttim.br;tim;tim; 111.111.111.111;‘“000;;;; ** If ne etwork does not require User ID and d Password, these fields should be eempty. Autom matic GPRS Set It the device is se et to Autom matic GPRS S Set , the devvice set GPR RS parameteers automatically depend ding on inserte ed SIM. For example, if Airtel SIM is inserted, th he device set AUTH to o 0, APN to o aitelgprs.ccom , USER__ID and USER_P PASS to emp pty. And th he device re eports respo onse string after adding g real GPRS S parameterss when auto omatic GPRS set is selecte ed. 4-2. Re eport Param meter Settiing HDR DEV_ID ANGLE_RPT ● Defin nition VER T1 T2 HDR SA200R RPT T1 SND D_DIST T4 SMS_TT1 SMS_T T2 SMS__PACK_NO : Set S paramete ers related o on report intterval. Definitions VER A1 RPT_TYPE Field DEV_ID T3 U nit Com mmand type “ cha ar. Device ID 02 String Rem mark Proto ocol Version S ec Interrval for sending status reeport in parking mode Rang ge : 0 ~ ‘“400 If 0, report in parking will be sent on nly one time when vehiccle starts parking. T2 String S ec Interrval for sending status reeport in driv ving mode Rang ge : 0 ~ “0000 “ ST5000 User Man nual If 0, report in driving will be sent on nly one time when vehiccle starts driving. T3 String S ec Interrval for sending status reeport in eme ergency mod de Rang ge : 0 ~ ’’’’ If 0, emergency report will be sent on nly one time when e occurs. emergency state A1 String Num mber of attem mpts for em mergency rep port until the e device gets acknowledg ge from servver ncy report w will be sent. If 0, no emergen SND_D DIST String Meeter Dista ance intervall for sending g status repo ort. Rang ge : 0 ~ “0000 (“0km) If 0, status reporrt related on n moving disstance is disa abled. If no ot 0, stats report is send when n traveled distance reach hes predefin ned SND_DISST. T4 String S ec Interrval for sending keep alivve string SMS_T1 String Min Interrval for sending status reeport in parking mode SMS_T2 String Min Interrval for sending status reeport in driv ving mode SMS_PA ACK_NO String ANGLE E_RPT String Repo ort No in one SMS messsage Deg gree Repo ort STT messsage if it s g reater than ANGLE_RPT. 0 : Disable Rang ge : 1 ~ 1”’ RPT_TY YPE String Set the t type of reporting. 0: FIF FO : First in First Out. 1: LIF FO : Last In First Out. [comm mand] SA200RPT;‘50000;02;1‘0;120;“ “0;3;0;0;0;0;0 0;0;0 [respon nse] SA200R RPT;Res;‘50000;010;1‘0;1 120;“0;3;0;0;0 0;0;0;0;0 ** If report interrval is set big numb er, network k may disco onnect GPR RS connectiion because e GPRS unication is not progresssed for a lo ong time. So, unit may not receivee command by GPRS. T4 T is for commu protectting against this disconn nection by seending shorrt data with short term. ** Alive e report can be sent only when the device has no data to send during T4 interval. 4-3. Ev vent Parameter Settin ng ” ST5000 User Man nual HD DR DE EV_ID VER IGNITIO ON T1 T2 IN1_T TYPE IN2 2_TYPE IN3_TYPE IN1_CHA AT IN2_CHAT IN N3_CHAT OUT1__TYPE OUT T2_TYPE OU UT1_ACTIVE OUT2_ACT TIVE PULSE1 1_NO PULS SE1_ON PULSE1_OFF PULSE2_N NO PULSE E2_ON PULLSE2_OFF IN4_T TYPE IN5 5_TYPE IN4_CHAT IN5_CHA AT BA AUD ● Defin nition : Set S paramete er related evvent. Field Definitions HDR SA200E EVT DEV_ID VER U nit Rem mark Com mmand type “ cha ar. Device ID 02 Proto ocol Version T1 String S ec Delay for enterin ng idle modee after ignitiion goes to off T2 String S ec Delay for enterin ng active mo ode after ign nition goes to t on IN1_TY YPE 0 ~ ” 0 = Falling Edge 1 = Rising Edge 2 = Both Edge (Falling & Rissing) 3 = Panic Button 4 = Call1 Button 5 = Call 2 Button “ = Reserved ” = Anti-Theft Button 13 = Disable Immobilizerr if it s acttivated by jammer detector. ault = 3 . Defa Only y the device that includ ded voice op ption (audio o circuit) can be set to Ca all1 Button o or Call2 Buttton . IN1_CH HAT String 100 0ms Input1 chattering g time. ge : 0 ~ ’’’’ Rang Defa ault = 3 sec. If 0, input1 is no ot checked. ‘ ST5000 User Man nual OUT1_T TYPE 0 ~ 5 0 = GPIO 1 = immobilizer & Auto actiive 2 = Immobilizer Auto active mean ns immobilizer is activated automatically when the veh hicle starts p parking. 3 = Pulse ”-2-3. 4 = LED Out for indicating ccall status. Refer 5 = Buzzer OUT1_A ACTIVE 0 or 1 0 = Open when out1 is activve 1 = GND when out1 is activve PULSE1 1_NO String Pulse e number when out1 typ pe set to pu ulse. Rang ge : 0 ~ ’’’’ If pu ulse no is ’’’’, pulsing rruns perman nently. PULSE1 1_ON String 100 0ms Activve time of pu ulse1 Rang ge : 0 ~ ’’’’ It should be set with even n number. PULSE1 1_OFF String 100 0ms Inacttive time of pulse1 Rang ge : 0 ~ ’’’’ It should be set with even n number. BAUD 0 ~ 4 It s available whe en extra eve nts support RS232. Baud d-rate 0 = No use 1 = 4‘00bps 2 = ’“00bps 3 = 1’200bps 4 = 3‘400bps 5 = 115200bps e device doe es not suppo ort RS232, itt should be 0. If the ’ ST5000 User Man nual [comm mand] SA200EVT;‘50000;02;1;“0;0;3;2 2;2;30;20;20;1 1;0;1;0;0;0;0;0 0;0;0;0;0;0;0;00 [respon nse] SA200EVT;Res;‘50000;010;1;“0;0 0;3;2;2;30;20;20;1;0;1;0;0;0;0;0;0;0;0;0;;0;0;0 ** If IG GNITION is set to 0 , device doesn n t check driving or parrking state o of the vehicle. It reports status string with idle mode always, and cannott support pa arking lock and the serrvice that en nters sleep or o deep sleep a automaticallyy when the vehicle is paarked. ** If IG GNITION is set s to 2 , the device ch ecks driving g or parking state of thee vehicle witth voltage range of vehicle e s battery. We W named it i as Virtua l Ignition . Virtual ignition can opeerate when the device installed into re eal vehicle and it may be b need adju ustment of voltage rang ge for speciial vehicle. For F setting method, please refer “.3. ase of pulse,, ** In ca pulse time may have tolerance about dozenss of ms. ** Imm mobilizer, LED D Blink line and Buzzer ttype cannot set both OU UT1 and OUTT2 simultane eously. ** In ca ase that a evvent is set to o door senssor , active state means door is opeened. ** If de evice has the e Handsfree kit, each timee the volume upp button is presssed once, the sppeaker volume is i turned up as below. 0 -> 1 -> 2 -> 3 -> 4 -> >5 ->0 -> 1 --> 2 ->3 -> 4 -> 5 - > 0 -> 1 -> …. (0 : Volume e mute, 5 :Maxx Volume) Type of no supporte ed event line e is fixed to No Use . able is for exxample of 4 line event m model. Below ta Field Definitions HDR SA200E EVT DEV_ID VER IGNITIO ON U nit Rem mark Com mmand type “ cha ar. Device ID 02 Proto ocol Version 0 ~ 2 Ignittion using state 0 : Not N use ignition 1 : Use U ignition Line 2 : Virtual ignitio on(power) 3 : Virtual ignitio on (motion) T1 String S ec Delay for enterin ng idle modee after ignitiion goes to off T2 String S ec Delay for enterin ng active mo ode after ign nition goes to t on 10 ST5000 User Man nual IN1_TY YPE 0 ~ 5 0 = Falling Edge 1 = Rising Edge 2 = Both Edge (Falling & Rissing) 3 = Panic Button 4 = Call1 Button 5 = Call 2 Button “ = Reserved ” = Anti-Theft Button 13 = Disable Immobilizerr if it s acttivated by jammer detector. Defa ault = 3 . Only y the device that includ ded voice op ption (audio o circuit) can be set to Ca all1 Button o or Call2 Buttton . IN1_CH HAT String 100 0ms Input1 chattering g time. Rang ge : 0 ~ ’’’’ Defa ault = 3 sec. If 0, input1 is no ot checked. OUT1_T TYPE OUT1_A ACTIVE ” ” = No Use 0 or 1 PULSE1 1_NO PULSE1 1_ON PULSE1 1_OFF BAUD 0 = No use [comm mand] SA200EVT;‘50000;02;1;“0;0;3;2 2;2;30;20;20;1 1;0;1;0;0;0;0;0 0;0;0;0;0;0;0;00 [respon nse] SA200EVT;Res;‘50000;010;1;“0;0 0;3;‘;‘;30;0;0 0;“;“;1;0;0;0;0 0;0;0;0;‘;‘;0;00;0 ** In ccase of even nt 4 line model, IN2_TY YPE, IN3_TY YPE, IN4_TYP PE, IN5_TYPEE, OUT1_TYPE and OUT T2_TYPE should be No Use e. Type and chat time e of non use ed event linees are set to o No Use and 0 autom matically alth hough these filed of and is set to o other value e. comma 4-4. GS SM Parame eter Setting HD DR DEV_ID VE R SM MS_LOCK SMS_MT1 SMS_MT T2 SMS__MT3 11 ST5000 User Man nual SMS__MT4 IN N_CALL_LOCK CALL__MO1 CALL_MO2 nition ● Defin Definitions HDR SA200GS SM VER SMS_LO OCK CA ALL_MT2 CALL_MT3 CALL_MT T4 CALL__MT5 : Set S paramete ers related S SMS or Call. Field DEV_ID CALL__MT1 Unit Remark Command ty ype “ char. Device ID 02 Protocol Version 0 or 1 Lock of Rece eiving Comm mands by SM MS Disable (0) / Enable (1) If enabled, only com mmands th hat receivess from SMS_MT1 ~ MT3 numbeer can be acccepted. SMS_M MT1 String Up to o 20 char. Phone numb ber for SMS commands SMS_M MT2 String Up to o 20 char. Phone numb ber for SMS commands SMS_M MT3 String Up to o 20 char. Phone numb ber for SMS commands SMS_M MT4 String Up to o 20 char. Phone numb ber for SMS commands IN_CALLL_LOCK 0 or 1 Lock of Incoming Call Disable (0) / Enable (1) If I enabled, only call fro om CALL_MT1 ~ MT5 number can c be accep pted. CALL_M MT1 String Up to o 20 char. Phone numb ber for call CALL_M MT2 String Up to o 20 char. Phone numb ber for call CALL_M MT3 String Up to o 20 char. Phone numb ber for call CALL_M MT4 String Up to o 20 char. Phone numb ber for call CALL_M MT5 String Up to o 20 char. Phone numb ber for call CALL_M MO1 String Up to o 20 char. Phone numb ber for outgo oing call from device CALL_M MO2 String Up to o 20 char. Phone numb ber for outgo oing call from device [comm mand] SA200GSM;‘50000 0;02;0;;;;;0;;;;;;;; [respon nse] SA200G GSM;Res;‘500 000;010;0;;;;;0 0;;;;;;; ** Whe en SMS or Call C numbers are not set,, that field should be em mpty. 4-5. Se ervice Param meter Setting 12 ST5000 User Man nual HDR DEV_ID VEER PARKING_LO CK SPEED D_LIMIT PW WR_DN CON_TYPE ZIP GROUP_SEND MP_C CHK ANT_CHK BAT__CHK M__SENSOR CALL GEO__FENCE DATA_LOG ANTITHFFT_CNT1 ANTITHFT_CN NT2 JAM _DET JAM_CHK_DIST JA AM_CHK_TM nition ● Defin : Set S paramete ers related reeport. Field Definitions HDR SA200S SVC DEV_ID VER PARKIN NG_LOCK U nit Rem mark Com mmand type “ cha ar. Device ID 02 Proto ocol Version 0 or 1 Parkiing lock ena able (1) / dissable (0) If 1, 1 the device checks vehicle po osition in parking perio odically. Whe en the vehiccle goes off some boun ndary or starts moving over some velocity, the device reports parking lock emergency. SPEED__LIMIT String Km m/h Overr speed limitt If 0, the device does not cheeck over spe eed. ehicle runes over prede efined value,, device If 1 and the ve orts speed alerts once. repo PWR_D DN 0 ~ 2 Powe er saving typ pe 0 : Disabled slee ep and deep sleep servicce 1 : Enabled deep p sleep 2 : Enabled sleep CON_T TYPE 0 ~ 2 Conn nection Type e with Serve r 0 = KEEP_CON ON 1 = KEEP_DISCO 2 = KEEP_NOP ail explanatio on is below. Deta ZIP 0 or 1 Use Zip able (1) Disable (0) / Ena GROUP P_SEND 0 or 1 Grou up Send for stored data 0 : Disable 1 : Enable. One packet can i nclude up to o 5 reports. up send is ex xplained bel ow. Grou 13 ST5000 User Man nual MP_CH HK 0 or 1 Main n Power Disc connection C Check Disable (0) / Ena able (1) ANT_CHK 0 or 1 GPS Antenna Co onnection Errror Check able (1) Disable (0) / Ena BAT_CH HK 0 or 1 Back kup Battery Error Check Disable (0) / Ena able (1) M_SEN NSOR CALL 0 ~4 0 or 1 Motiion Sensor Motion Collision Shock Disable Disable Disable Enable Disable Disable Disable Disable Enable Enable Disable Enable Disable Enable Disable Enable Enable Disable “ Disable Enable Enable ” Enable Enable Enable Supp port Call with headset Disable (0) / Ena able (1) GEO_FE ENCE 0 or 1 Supp port Geo-fen nce Disable (0) / Ena able (1) DAT_LO OG 0 or 1 Log out with RS2 232 0 = No Use 1 = Enable getting saved log g data by RS S232 [comm mand] SA200SVC;‘50000;;02;1;120;0;0 0;0;0;1;1;1;0;0 0;0;0;0;0;0;0;0 [respon nse] SA200SVC;Res;‘500 000;010;1;120 0;0;0;0;0;1;1;1 1;0;0;0;0;0;0;0 0;0;0 ** Funcction of M_S SEMSOR can n be used wiith the mode el that has motion senso or. If sh hock or colliision detection is enableed, device will report to server when n gets any shock or colliision. ** If tthis parame eter has bee en customizzed, This ta able should be disregaarded and you should d follow custom mized operration docum ment. CON_T TYPE 1. KEEP_CON N : The devicce keeps TCP P connection n always and d can receivees a comman nd by GPRS.. 2. KEEP_DISC CON : The de evice conneccts TCP conn nection when the data iss sent. Afterr sending, th he device discconnects GP PRS and TCP P connection if it estimattes there is n no data for sending with hin 14 ST5000 User Man nual 3minutes. In this case, it cannot reeceive a com mmand by GPRS. 3. P : The device doesn t seend any repo ort after be installed. Wh hen the device enters KEEP_NOP emergencyy mode or receive Startt Report com mmand by SMS or RS2332, it starts report depen nding on report parameters. It may be u used for saviing GPRS fee e. Current veersion canno ot support th his option. Group Send The de evice stores data if the vehicle is in n no GPRS area. And, the vehicle moves to GPRS availab ble area, device starts sending stored data. If group send option is enable ed, the devicce makes 5 reports to on ne bundle a nd send the ese 5 reportss at one time. Group send is usefful to speed up sending . nsor M_Sen 1. Collision: The T device sending a evvent when ig gnition is ON N and have a motion. 2. Shock: The e device sen nding a even nt when ignittion is OFF and a have a m motion. Jammiing detectio on procedurre JAM_CHK_DIST & JAM_CHK_TM M are assisst for jammin ng detection n to avoid faalse detection. At leasst, we recommend use JA AM_CHK_DIS ST for safety y. If you use two assiist functions, it can deteect two case of jamming as follows. *Case o of jamming GPRS only. Jammin ng detected -> JAM_CHK_DIST -> JA AM_CHK_TM M -> Triggered by JAM_D DET mode. *Case o of jamming GPRS & GPS S. Jammin ng detected -> JAM_CHK_TM -> Triiggered by JAM_DET mo ode. JAM_CHK_DIST : if 0, skip this function. JAM_CHK_TM : if 0, 0 skip this fu unction. ble all of asssist functionss, just triggeered by HAM M_DET mode after detectted jamming g. If disab In this case, it s possible to falsse detection n in weak GS SM or strong g radio area. 4-6. Ad dditional Pa arameters HDR DEV_ID nition ● Defin VE ER SVR_TYPE B_SVR_TTYPE UDP__ACK DEV__PORT : Setting addittional param meter requestted. 15 ST5000 User Man nual Field Definitions HDR SA200A ADP DEV_ID VER SVR_TY YPE “ cha ar. 02 T / U Un nit Remarrk Comm mand type Device e ID Protocol Version Server Protocol Type T : TCP U : UD DP B_SVR__TYPE T / U Backup p Server Protocol Type T : TCP U : UD DP UDP_A ACK 0 ~ 3 ACK from Server when UPD iss used. 0 : No use 1 : ACK K when the server receivves reports except alive. 2 : ACK K when the server receivves reports except STT and d alive reporrt. 3 : ACK K when the server receivves emergen ncy report. Comm mand responsse doesn t n need ACK. DEV_PO ORT String Device e s port for re eceiving com mmand from m UDP server. It can be used only when UDPP server is used. e device wou uld use port ’000. If 0 or empty, the If not zero, the device can receive commands with port DEV_PORT. Reserve ed Reserve ed Reserve ed Reserve ed Reserve ed Reserve ed [comm mand] SA200A ADP;‘50000;02;U;T;2;’00 00;0;0;0;0;0;0 [respon nse] SA200 0ADP;Res;‘50 0000;022;U;TT;2;’000;0;0;0 0;0;0;0 This co ommand can n be applied from softwaare version 22. n case of UD DP ACK in 1“ ST5000 User Man nual UDP iss protocol that doesn t check wheether the da ata is transm mitted succeessfully. So, the device checks comple etion of send ding with AC CK dependin ng on UDP_A ACK type. ACK is sent by servver when the data is recceived. If the A ACK is not sent during more than 2 minutes after sending, the devicce recognize es the data was w not reached to server and sends th he data aga in. Examp ples of ACK report are as a below. String Format : SA A200ACK;‘50000 Zip Forrmat : 0x15 0x‘5 0x00 0x00 It is reccommended d ACK_TYPE is set to 1 tto confirm all a data can be transmittted safely. UDP_AC CK=0 U DP_ACK=1 UDP_ACK=2 UD DP_ACK=3 Alive STT Event, Alert, Etc. Emerg gency Reporrt Type 4-7. Se et Paramete ers of Main n Voltage HDR DEV_ID VER CHR_STOP__THRES_12 OPE ERATION_STO OP_THRES_1 12 ● Defin nition CHR__STOP_THRESS_24 OPERATION_S STOP_THRES S_24 Defin nitions Re emark HDR SA20 00MBV Co ommand type VER IGNDET_LL : Set S some value of main vvoltage. Field DEV_ID IG GNDET_H DECIDE_B BAT_24 “ cchar. 02 De evice ID Pro otocol Versio on 1” ST5000 User Man nual CHR_ST TOP_THRES__12 Strring Vo oltage value to stop baackup batterry charging in 12V vehicle. DECIDE E_BAT_24 Strring Vo oltage value to check w whether the vehicle s ba attery is 12V. OPERA ATION_STOP__THRES_12 Strring Vo oltage value to protect veehicle batterry. The device operation stop ps if car battery voltage is lower an this value e in vehicle tthat has 12V V power. tha In case of virtual ignitio on, the veh hicle can re ecognize IGNDET T_H driiving Strring state when veehicle powe er is more than IGN NDET_H. De efault = 0 IGNDET T_L Strring In case of virtual ignitio on, the veh hicle can re ecognize vehiclee power is le ess than IGN NDET_L. parking state when efault = 0 De [comm mand] SA200MBV;‘50000 0;02;10.5;22;1 1’;‘.00;1‘.00 0;0;0 [respon nse] SA200M MBV;Res;‘500 000;122;10.5 5;22;1’;‘.00;1 1‘.00;0;0 IGNDET T_H and IGN NDET_L are 0 , device ch heck parking g and driving g automaticaally. 4-8. Se et Paramete ers of Motion Sensorr HDR DEV_ID VER CHR_STOP__THRES_12 OPE ERATION_STO OP_THRES_1 12 OPERATION_S STOP_THRES S_24 VI_ON_THRES VI_ON_DELLAY VII_OFF_DELAY VI_OFF_PERC CENT nition ● Defin Definitions HDR SA200M MSR VER SHOCK K_DELAY VI_ON_PE ERCENT DECIDE_B BAT_24 IG GNDET_H IGNDET_LL VI_OF FF_THRES : Set S motion sensor param meters Field DEV_ID CHR__STOP_THRESS_24 Un nit Comm mand type “ cha ar. Device e ID 02 String Remarrk Protocol Version Se c. Delay for entering shock detecction mode after ignition off 0 – Dissable 1‘ ST5000 User Man nual Range : 1 ~ 21“00 0 (5hour) mmend : “00 ( 10 min.) Recom MOTIO ON_THRES String Steep Detecttion level of shock violattion. Range : 0.04 ~ 2.0 mmend : 0.04 Recom SHOCK K_THRES String Steep Detecttion level of shock violattion. Range : 0.04 ~ 2.0 mmend : 0.04 Recom COLL_T THRES String Steep Gravity y for collision report. Range : 0.1 ~ 2.0 mmend : 0.” Recom VI_ON__THRES String 1/25 5G Thresh hold value fo or Motion Vi rtual Ignition On Range : 3~50 Default : 5 VI_ON__DELAY String Sec. Delay time for Motion Virtual Ignition On Range : 3~’’’ Default : 10 VI_ON__PERCENT String Percen nt for Motion n Virtual Ign nition On. Range : 30~100 Default: ”0 VI_OFFF_THRES String 1/25 5G Thresh hold value fo or Motion Vi rtual Ignition Off Range : 3~50 Default : 5 VI_OFFF_DELAY String Sec. Delay time for Motion Virtual Ignition Off Range : 3~’’’ Default : 10 VI_OFFF_PERCENT String Percen nt for Motion n virtual Igniition Off. Range : 30 ~ 100 Default : ”0 [comm mand] SA200MSR;;02;“00 0;0.04;0.04;0.” ”;5;10;”0;5;10;”0 [respon nse] SA200M MSR;Res;‘525 5‘‘;12‘;“00;;0.04;0.04;0.” ”0;5;10;”0;5;1 10;”0 * For tthe shock le evel, we reccommend itt to set to 0.04. if it's over than 0.04, the se ensor will be more insensitive or shock dete ection. as it fo 1’ ST5000 User Man nual 4-11. C Control Com mmand HDR ● Defin nition DEV V_ID VER CMD_ID : Controls som me functions . Field Definitions HDR SA200C CMD DEV_ID Un nit Comm mand type “ cha ar. VER Device e ID 01 CMD_ID Remark Protoccol Version String Contro ol command d content Caution n : If it’s nott correct the e Unit ID, ig gnored. 4-11-1.. Status Re equest ● Defin nition Field CMD_ID : Location polll, request off the status report. Definitions Un it StatusR Req Remark Statuss request If rece eived, the de evice sends sstatus string instantly. [comm mand] SA200CMD;‘50000 0;02;StatusReeq [respon nse] SA200STT;‘50000;010;200’0”24 4;0”:12:1“;00 012’;+3”.4”’ ’’’5;+12“.‘‘‘5‘15;000.0 02’;000.00; ”;1;0 0;15.33;10000 00;2;0002 4-11-2.. Reset ● Defin nition Field CMD_ID : Reset all of parameters. Definitions Resett Un it Remark Reset 20 ST5000 User Man nual Initialize all param meters with factory value and reboot the device e. [comm mand] SA200CMD;‘50000 0;02;Reset [respon nse] SA200 0CMD;Res;‘5 50000;010;Reeset 4-11-3.. Preset ● Defin nition : Reset all of parameters. Field Definitions CMD_ID Un it Remark Prese et Reporrt parameter setting valu ues and current device status. Respo onse includes network, rreport, event, GSM and service param meters. It includes status of device, also. [comm mand] SA200CMD;‘50000 0;02;Preset [respon nse] SA200C CMD;Res;‘50000;010;Presset; NTW;;0;internet;;;1 111.111.111.1 111;‘“00;;;;1234; RPT;“ “0;1‘0;120;“0 0;3;0;0;;;; EVT;1 1;“0;0;3;2;2;30 0;20;20;1;1;1;;0;0;0;0;0;0;0;0;0;0;0;0; GSM;0;;;;;0;;;;;;;; 1;120;0;0;0;0;1;1;1;0;0;0;0 SVC;1 DEV;0 0;0;0;0 [respon nse] event 4 line model NTW;;0;internet;;;1 111.111.111.1 111;‘“00;;;;1234; RPT;“ “0;1‘0;120;“0 0;3;0;0;;;; EVT;1 1;“0;0;3;‘;‘;30 0;0;0;“;“;1;0;0 0;0;0;0;0;0;0;0 0;0;0;0; GSM;0;;;;;0;;;;;;;; 1;120;0;0;0;0;1;1;1;0;0;0;0 SVC;1 DEV;0 0;0;0;0 ** Afte er power on, device send ds response string of pre eset once. ** DEV V filed inform ms current status of devi ce as below w. OUT1 0 = Disable OUT2 0 = Disable PWR_DN 0 = Normal BAT__CON Backu up battery is 21 ST5000 User Man nual 1 = Enable 1 = Enable Field Definitions CMD_ID 1 = Sleep disco onnected. 2 = Deep sleep 1 = Backup batteery is connected. Un it Remark PresettA Reporrt all parame eters includin ng additiona al parameter.r. [comm mand] SA200CMD;‘50000 0;02;PresetA [respon nse] SA200C CMD;Res;‘50000;010;PressetA; 111;‘“00;;;;1234; NTW;;0;internet;;;1 111.111.111.1 RPT;“ “0;1‘0;120;“0 0;3;0;0;;;; EVT;1 1;“0;0;3;2;2;30 0;20;20;1;1;1;;0;0;0;0;0;0;0;0;0;0;0;0; GSM;0;;;;;0;;;;;;;; SVC;1 1;120;0;0;0;0;1;1;1;0;0;0;0; ADP;U U;T;2;’000;0;0;0;0;0;0; DEV;0 0;0;0;0;0;0;0;0 ** Thiss command can be app plied from s oftware verrsion 22. ** DEV V filed inform ms current status of devi ce as below w. OUT1 OUT2 PWR_DN 0 = Disable 0 = Disable 0 = Normal 1 = Enable 1 = Enable 1 = Sleep 2 = Deep sleep TRACKING Antii-Theft 0 = Stop Trackin ng 0 = Dissable 1 = Start Trackin ng 1 = Ena able Reserve ed BAT__CON Backu up battery is disco onnected. 1 = Backup batteery is connected. Resserved mergency 4-11-4.. ACK of Em 22 ST5000 User Man nual ● Defin nition : Stop emerge ency report. Field Definitions CMD_ID AckEme erg Un it Remark Ackno owledgement of emergeency report. The device will sto op emergen ncy reports if it is in emergency state. [comm mand] SA200CMD;‘50000 0;02;AckEmeerg [respon nse] SA200C CMD;Res;‘50000;010;AckkEmerg 4-11-5.. Enable1 ● Defin nition : Active Outpu ut1. Field Definitions CMD_ID Un it Enable e1 Remark Enable e Output1 [comm mand] SA200CMD;‘50000 0;02;Enable1 [respon nse] SA200C CMD;Res;‘50000;010;Ena ble1 [respon nse] SA200C CMD;Res;‘50000;010;Ena ble1NoUse (in case thatt IN type is sset to No Use U ). ** Outp put1 line go oes to active status. ** If OU UT1 set with h immobilize er, output1 liine goes to active statuss gradually w with pulse in n driving mode. ** If O OUT1 set witth pulse typ pe, output1 line genera ates pulse an nd returns iinactive statte after pulssing out automa atically. 4-11-6.. Disable1 ● Defin nition Field CMD_ID : Inactive Outp put1. Definitions Un it Disable e1 Remark Disablle Output1 [comm mand] SA200CMD;‘50000 0;02;Disable1 23 ST5000 User Man nual [respon nse] SA200C CMD;Res;‘50000;010;Disaable1 [respon nse] SA200C CMD;Res;‘50000;010;Disaable1NoUse (in case that IN type is set to No Use U ). ** Outp put1 line go oes to inactiv ve status. 4-11-9.. Request IMSI ● Defin nition : Request the unique SIM ID. Field Definitions CMD_ID Un it ReqIM MSI Remark Reque est IMSI (unique SIM ID)) If rece eived, device e sends IMSII of using SIM M. [comm mand] SA200CMD;‘50000 0;02;ReqIMSII [respon nse] SA200C CMD;Res;‘50000;010;Req qIMSI;”24031 1111553””’ 4-11-10 0. Requestt ICCID ● Defin nition : Request the ICCID. Field Definitions CMD_ID Un it ReqICC CID Remark Reque est ICCID (sequence num mber that is displayed on n SIM) If rece eived, device e sends ICCID D of using SIM. [comm mand] SA200CMD;‘50000 0;02;ReqICCIID [respon nse] SA200C CMD;Res;‘50000;010;Req qICCID;‘’550 02300000‘42 25“““‘ 4-11-11 1. ReqVer ● Defin nition Field CMD_ID : Request softw ware version n. Definitions ReqVe er Un it Remark Reque est device ve ersion Device e reports Model, Buyeer, Protocol and S/W release version. 24 ST5000 User Man nual [comm mand] SA200CMD;‘50000 0;02;ReqVer [respon nse] SA200C CMD;Res;‘50000;010;Req qVer;SA200E__SAMPLE_STBASE_001 4-11-12 2. Erase All ● Defin nition Field CMD_ID : Erase all of data in buffeer. Definitions Un it EraseA All Remark Erase saved all rep ports and diisable outpu uts. evice is delivvered to This iss needed to initialize jusst before de a custtomer. [comm mand] SA200CMD;‘50000 0;02;EraseAll [respon nse] SA200C CMD;Res;‘50000;010;ErasseAll 4-11-13 3. Initialize e Traveled Distance ● Defin nition Field CMD_ID : Initialize the travel distan nce. Definitions Un it InitDisst Remark Set tra aveled distan nce to 0. [comm mand] SA200CMD;‘50000 0;02;InitDist [respon nse] SA200C CMD;Res;‘50000;010;InitD Dist 4-11-14 4. Initialize e Message Number ● Defin nition : Initialize the message se quence num mber. Field Definitions CMD_ID InitMsg gNo Un it Remark Set message number to 0. 25 ST5000 User Man nual [comm mand] SA200CMD;‘50000 0;02;InitMsg No [respon nse] SA200C CMD;Res;‘50000;010;InitM MsgNo 4-11-23 3. Reboot ● Defin nition : reboot unit. Field Definitions CMD_ID Reboot Un nit Remark Reboo ot device. [comm mand] SA200CMD;‘50000 0;02;Reboot [respon nse] SA200C CMD;Res;‘50000;010;Reb boot 4-11-24 4. Requestt SIM IP Ad ddress ● Defin nition : Request of th he local IP aaddress in SIM card. Field Definitions CMD_ID ReqSIMIIP Un nit Remark SIM ca ard IP reque est [comm mand] SA200CMD;‘50000 0;02;ReqSIMIIP [respon nse] SA200C CMD;Res;‘50000;010;Req qSIMIP;1”2.1“.1‘.“ 2“ ST5000 User Man nual 3. Installation 3.1 Inse ert SIM card d. 2” ST5000 User Man nual 4. Trou uble Shoo oting (LED Indicatorr) 4.1 Blue e LED: Indicates GPRS status. GPRS Blink Coun nt Norma al Server Com. Error Remarkss 1. Serveer or network k parameter is wrong. 2. Serveer is closed. 3. Temp orary netwo ork barrier GPRS C Com. Error 1. Netwo ork parametter is wrong. 2. SIM iss blocked ab bout GPRS using. 3. Temp orary netwo ork barrier 4. Weakk GPRS signa al 5. GPRS antenna co onnection is not firm. No Network 1. GPRS antenna is disconnected. 2. GPRS antenna or socket of GPRS antennaa is broken. 3. Devicce is broken. SIM PIN Locked PIN is enable ed. 1. SIM P Cannott Attach h “ NW al. 1. Weakk GPRS signa 2. GPRS antenna co onnection is not firm. No SIM ” o SIM is nott inserted prroperly. 1. Theree is no SIM or 2. SIM o or SIM socke et is broken. 2‘ ST5000 User Man nual 4.2 RED D LED: Indica ates GPS sta atus. GPS Blink Cou unt Norma al No Fix Rema rks 1. If p power on, GPS chipsett is trying tto find position during some minutes. S antenna la ays on weak or no GPS ssignal positio on 2. GPS 3. GPS S antenna co onnection is not firm. GPS Ch hipset Error GPS An ntenna Errorr 1. GPS S antenna iss disconnecte ed. 2. GPS S antenna or socket of GPS G antennaa is broken. 3. Uniit is broken. 2’ ST5000 User Man nual FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : RICHARD Create Date : 2016:05:19 10:09:50+09:00 Modify Date : 2016:07:12 18:01:20+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : RICHARD Title : Microsoft Word - User Manual_ST500 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:07:12 18:01:20+09:00 Producer : Acrobat Distiller 10.0.0 (Windows) Document ID : uuid:03483947-1cad-45c0-a2a8-b969bd70b251 Instance ID : uuid:20a518ef-453d-4067-b413-b71e995d3602 Page Count : 30EXIF Metadata provided by EXIF.tools