Sunwe Electronic Technology IAEB16 Bluetooth earphone User Manual IAEB16 1599 01 IB 24FEB16 1

HongKong Sunwe Electronic Technology Limited Bluetooth earphone IAEB16 1599 01 IB 24FEB16 1

User Manual

To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently asked
questions, visit the support section at:
Para descargar este Manual del Usuario en Inglés,
Español y Francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
Pour télécharger ce guide de l’utilisateur en Anglais,
Espagnol ou Français, ou pour obtenir des réponses
à des questions fréquemment posées, consultez la
rubrique d’assistance sur:
International Support
FCC WARNINGS
For Warranty Information and the most
up-to-date version of this User’s Guide, go to:
.
Warranty
Protect for Today
Sustain for Tomorrow
Made
Green
ADDITIONAL WARNINGS
WARNING: To prevent or shock hazards, do not expose
this unit to rain or moisture.
WARNING : Where the mains plug or appliance coupler is
used as the disconnect device, such disconnect device shall
remain readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and
local guidelines. should never be disposed of in normal
household waste, and they should never be incinerated, as they
might explode. Contact your local government for disposal or
recycling practices in your area.
WARNING: product may contain chemicals known
to the State of California to cause birth defects, or other
reproductive harm (California Prop 65). Wash hands
handling.
product meets and complies with all Federal regulations.
To avoid hearing damage, make sure that the volume on
your music player is turned down before connecting your
headphones. placing headphones in/on your ears,
gradually turn up the volume until you reach a comfortable
listening level.
Wireless Stereo Earbuds
User’s Guide for Model IAEB16-1599-01
This device complies with part 15 of the FCC Rules. Operation is subject to
Changes or modifications not expressly approved by the party responsible for
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
compliance could void the user's authority to operate the equipment.
Overview & Controls
Microphone
DC Power Input
Use with USB charging cable
Pairing/Power
Indicator
Volume Up
Power / Pair / Play /
Pause /Speakerphone
Press and hold to power
ON or OFF.
Press & Hold for 4 seconds
to Pair.
Press to play or pause audio.
Press to answer
incoming call.
Volume Down
LED Indicators
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable
lithium ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Includes
Battery Power
Initial charge time is approximately 2 hours.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge the
unit. Charge fully before use.
If your device should become unpaired, or you nd it
is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the
Power/Pair button for approximately 4 seconds.
The indicator will ash red and blue. (When
pairing, remain within 3 feet of the unit.)
2. Using the controls on your Bluetooth device,
select IAEB16 in your Bluetooth settings to pair.
(If your device requests a password, enter the
default password 0 0 0 0 )
3. Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit
will stay paired unless unpaired manually by the
user, or erased due to a reset of the device.
Pairing a Bluetooth Device Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
device to select and begin playing an audio
track. (Audio from the connected Bluetooth device
should now be heard through the earbuds.)
2. To play or pause audio, press the Play/Pause
button, or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button,
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or
use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.

Navigation menu