Sunwin Technology SW608 GPO PR50 User Manual

Shenzhen Sunwin Technology Co., Ltd. GPO PR50

Contents

User Manual

Download: Sunwin Technology SW608 GPO PR50 User Manual
Mirror Download [FCC.gov]Sunwin Technology SW608 GPO PR50 User Manual
Document ID3855178
Application IDc0Gd3u23gOKSyom2Y5WHDQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize26.55kB (331896 bits)
Date Submitted2018-05-17 00:00:00
Date Available2018-05-17 00:00:00
Creation Date2018-05-17 11:26:46
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-05-17 14:56:17
Document TitleMicrosoft Word - user manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

–GPO PR50 Manual:
Introduction
Thanks for purchasing the GPO PR50 turntable player from GPO. This retro-themed unit
adds a touch of classic style to any room, while still providing amazing audio quality. To get
the most from your new turntable player, please read these instructions carefully before use,
and keep them in a safe place for future reference.
Unpacking
This package contains:
1x
1x
1x
1x
1x
1x
GPO PR50 Turntable
Turntable Needle (fitted)
Turntable Slip Mat (placed on the turntable)
DC Power Cable
RCA Cable
Manual
Carefully remove all of the contents from the packaging. Make sure you retain and store this
manual for future reference.
When choosing a location for the unit, avoid inclines, direct sunlight or sources of heat and
moisture.
Keep all of the ventilation holes clear, and do not place any equipment on top of the unit as
this can lead to damage.
Only remove the stylus guard from the stylus assembly during use. Leaving the guard in
place during storage will protect your stylus from damage.
Features
Your GPO PR50 turntable unit has the following features:
1.
2.
3.
4.
5.
6.
7.
8.
9.
2-speed turntable (33 and 45 RPM)
Belt drive and semi-automatic play tone arm
Audio Technica needle
Built-in 45 RPM adapter
Aux-in, RCA Audio out and Headphone out functions
Bluetooth functionality
USB playing, recording and segmentation recording
Pitch adjustment
None built-in speakers
Location of Controls
1. Power Indicator Light
2. Pitch Adjustment
3. Stop for Turntable
4. Start for Turntable
5. Turntable Mode
6. Turntable 33 RPM
7. Turntable 45 RPM
8. Bluetooth Mode
9. Fast Forward and Next
10. Play/Pause
11. USB Mode
12. Record
13. USB Stick Slot
14. Stop for USB Playing/Recording
15. Rewind and Previous
16. Power on/off and Volume
17. Headphone Jack
18. Aux-in Jack
19. RCA Audio out Jack
20. DC Power Jack
Mode Selection
Turntable Mode - play a vinyl record through external speakers
Press to STOP music playing in Turntable mode
Press to START music playing in Turntable mode
Press to select 33 RPM
Press to select 45 RPM
USB Mode - play MP3 files stored on an external USB drive
USB Record Mode - record your vinyl to MP3 files on an external USB drive
Press to STOP music playing in USB mode. Press to STOP vinyl recording in
Record mode
Press to PLAY or PAUSE the music under USB mode
Press to the NEXT song under USB mode. Hold down the button for three seconds
to fast forward under USB mode
Press to the PREVIOUS song under USB mode. Hold down the button for three
seconds to rewind under USB mode.
Bluetooth Mode - connect the unit to external Bluetooth-enabled speakers
Unit Operation
Your GPO PR50 turntable player has a number of modes of operation. Each one will allow
you to play music from a different source using external speakers.
Turntable Mode
1. Turn on the unit power
2. Select Turntable mode by pressing the turntable mode button
3. Choose the correct speed by pressing the 33/45 RPM button, using the 45RPM
adapter if needed, and place the vinyl record onto the turntable
4. Place the tone arm into the correct position to begin playback
5. The turntable will stop automatically when the record has finished
6. Use the volume controls to set the desired sound levels
Aux-in Play Mode
1. Turn on the unit power
2. Connect your chosen device to the unit’s Aux-in jack using the cable provided
3. The power indicator light will change from red to blue, and the music in Turntable
mode and USB mode will be cut off
4. Press the play/pause button to begin playback
5. Use the volume controls to set the desired sound levels
USB Play Mode
1.
2.
3.
4.
5.
Turn on the unit power
Select USB mode by pressing the USB mode button
Connect your USB device to the unit using the USB slot
Press the Play/Pause button to begin playback
Use the volume controls to set the desired sound levels
Bluetooth Mode
The GPO PR50’s Bluetooth mode allows you to stream your vinyl to any Bluetooth enabled
speaker or headphones.
1. Turn on the unit power
2. Select Bluetooth mode by pressing Bluetooth mode button
3. The Bluetooth indicator light will flash rapidly as the unit searches for nearby
Bluetooth-enabled devices
4. When paired the blue light will flash shortly with a two second interval
5. If the devices fail to sync, please repeat points 1-4
6. Use the volume controls to set the desired sound levels
7. Hold down the stop button under USB mode for three seconds to turn off Bluetooth
mode
Please note: When pairing the GPO PR50 to your Bluetooth speaker or headphones,
please ensure that the device you wish to stream vinyl to is set to pairing mode. This
will allow them to sync.
Vinyl Record Mode
1. Insert a blank USB stick into the slot
2. Place the desired vinyl onto the turntable and begin playing
3. Press the record button on the control panel, the red light will begin to flash. Press
the record button once to record the vinyl in one track, press the record button twice
to split the tracks
4. Press the stop button to turn off recording
RCA Audio Out
An RCA cable is included with your GPO PR50. You will require this cable to connect to extra
speakers.
Headphone Out
Headphones can be connected using the Headphone jack.
Pitch Adjustment
When the Pitch knob is centred on the middle line, the record player plays at normal speed.
When the LP speed is slower than expected, you can turn right to adjust the speed. When
the LP speed is faster than expected, you can turn left to adjust the speed.
Replacing the Stylus
The unit’s stylus will need replacing regularly. To replace the stylus:
[Note – use images from existing manual]
1.
2.
3.
4.
5.
6.
7.
8.
Push the arm lock to release the tone arm
Remove the cap from the cartridge to expose the needle
Carefully remove the cartridge from the socket
Completely remove the stylus needle from the cartridge
Carefully place a new stylus needle into the cartridge
Place the cartridge back into the socket
Put the cartridge cap back in place
Re-engage the arm lock
The turntable’s stylus needs to be replaced every 3-4 months for best performance. To buy
a replacement stylus, go to www.gporetro.com or visit one of our stockists.
Tips for Better Performance
To get the best possible performance from your turntable, please ensure that you:

Always handle the unit carefully, and take care to lift it from the centre or both
edges.




Do not touch the stylus tip with your finger, and avoid bumping it onto the turntable
mat or the edge of a record.
Regularly clean the stylus tip using a soft brush in a back-to-front motion.
Never use harsh chemicals or solvents on any part of the turntable system.
Ensure that the unit is unplugged and the tone arm is secured before moving.
Product Care
Your GPO PR50 record player will provide you with years of listening pleasure, as long as it
is properly cared for. To ensure that the unit remains in working condition, please take care
to:








Keep the unit clean, dry, and away from any potential sources of splashing or
dripping, such as vases.
Avoid areas with high levels of humidity – such as kitchens and bathrooms, and
those with extreme temperatures of 35°C or higher.
Do not let any loose items fall into the unit. If this happens, unplug the unit and call
our support team for advice.
Always unplug the unit before cleaning.
Take care when cleaning and wiping the unit’s plastic parts and finish, and use only a
dry dust cloth. The front panel can be cleaned gently with a damp cloth and mild
soap.
Store the unit horizontally. If placed on an incline, the unit’s playback may be
affected.
Avoid condensation. If the unit is moved from a cold to a warmer location, please
wait 30 minutes before operation.
Disconnect the power supply after use.
Product Support
For more advice or assistance, please visit www.gporetro.com, or call our support team on
0845 521 4095.
Please note, for your personal safety you SHOULD NOT attempt to open the unit’s casing.
Opening the casing voids your warranty, and no user serviceable parts are contained inside
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:05:17 11:26:46+08:00
Modify Date                     : 2018:05:17 14:56:17+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:05:17 14:56:17+08:00
Format                          : application/pdf
Title                           : Microsoft Word - user manual
Creator                         : Administrator
Document ID                     : uuid:92cecca2-4bf4-4b54-9126-c5374acdd0fb
Instance ID                     : uuid:b5444956-7e74-45bd-a36f-00e368fb7580
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AGLC-SW608

Navigation menu