Sunwoda Electronic SWD007 Little Strawberry Bluetooth Keyboard User Manual 1

Sunwoda Electronic Co.,Ltd. Little Strawberry Bluetooth Keyboard 1

Users Manual

Little Strawber r y Bluetooth KeyboardSpeciationModel No.:SWD-007Address:No.2,Yihe Rd.,Shilong Community,Shiyan Street,Baoan District,Shenzhen,China
TPU keyboard buttonUSB battery charge interfaceToggle power switch Switch to code Power indicatorCaps lock indicator Bluetooth search/connection indicatorAudible feedback indicatorTouch panel Know about the keyboard
Set up the keyboard1.Turn ON the power switch The Bluetooth will be in search automatically, the light is off when the keyboard is connected. If it is failed to search the paired device in 5 minutes, the light will be off.2.Please ensure the Bluetooth function of the paired deviceis opened . Please choose:Set up—General—Bluetooth –Open3. Choose “Bluetooth 3.0 keyboard” in menu4. Enter in PIN code If the paired device request to enter in the PIN code, please press the button on bluetooth keyboard. The Bluetooth indicator light is turn blue when the keyboard is connected, then off.
Charging for keyboard1.Use the Micro USB to connect the keyboard and power source, the power indicator light will be flashing in red.2. The power indicator light will stay lit once it is fully charged.
Use your WIN8Key function descriptionReturn to the main interface of the paired device.Sound offTurn down the volumeTurn up the volumePause/PlayStart the search functionSharingConnect the other device via paired deviceSet up the windowsSpecial shortcuts10. Slide the mouse = Single refers to the sliding inside11. Page turning = Two fingers slide to a direction12. View the properties: three fingers touch the panel together13. “FN” +”Space” = Turn on/off the back light of keyboard, 4 different brightness levels can be chosen to make the back light fit the working environment well. 14. “FN” + “>” = Turn on/off the audible feedback indicator 15. “FN” + “B” = Show battery level
Protect the keyboardPlease use the keyboard properly1. Please keep the keyboard away from the sharp tool2. Connect the keyboard and device successfully 3. Please do not put the heave thing on the keyboard4. Please do not put the keyboard in the Microwave oven5. Please do not use the keyboard to beat other things6. Please keep the keyboard away from the oils or corrosive chemicals7. Please do not put the keyboard into the water8. Please keep the keyboard full of energy. Status indicator lamp descriptionIndicator Description The power light flicker in turn In charging state The power light flicker in warning Please charge the battery asap, the battery is running low. The Blue indicator light is twinkling Twinkle quickly: the keyboard is in searching state Twinkle slowly: the keyboard is trying to re-connect paired device The Bluetooth indicator twinkle normally Pairing successfullyUse your WIN8
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:　 Reorient or relocate the receiving antenna.　 Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.　 Consult the dealer or an experienced radio/TV technician for help.RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu