Super Star Technology Co TM-1320 Remote Control ON OFF User Manual APT 1320 T0 J1

Super Star Technology Co Ltd Remote Control ON OFF APT 1320 T0 J1

User manual

Download: Super Star Technology Co TM-1320 Remote Control ON OFF User Manual APT 1320 T0 J1
Mirror Download [FCC.gov]Super Star Technology Co TM-1320 Remote Control ON OFF User Manual APT 1320 T0 J1
Document ID981759
Application IDltLj16IHGlP+YmaitUOZOA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.27kB (178336 bits)
Date Submitted2008-08-06 00:00:00
Date Available2008-08-06 00:00:00
Creation Date0000-01-01 00:00:00
Producing SoftwareCorel PDF Engine Version 3.0.0.667
Document Lastmod2008-08-01 18:53:26
Document TitleAPT-1320-T0-J1.cdr
Document CreatorCorelDRAW
Document Author: Joyce

APT-1320 INSTRUCTION
INSTALLATION:
APT-1320 own easy-to-use and simple installation feature .
1.Plug adaptor into the power outlet (Fig.1) .
2.Plug appliance into the socket of receiver(Fig.2).
3.Remove the insulating tab on the back of transmitter(Fig.3) .
4.Make sure your appliance is turned on , when power is connected , you
can turn on /off your appliance by pressing the buttons on the transmitter .
figure 3
figure 1
figure 2
5.If the indicator light doesn't work , it is possible that the fuse has been burned,
to replace a new fuse is required.
6.The appliance attached to each outlet of receiver can be controlled individually. .
SAFE CAUTIONS:
1.The receiver is forbidden to use in damp area (cellar , swimming pool , etc.) or
outdoors(court , corridor etc.)
2. The receiver is forbidden to use in the explosive and inflammable place (garage,
boiler room, painting room and storage room etc.)
3. The power of appliance attached to the receiver can not exceed 1000W, otherwise
the fuse in the receiver will be burned , the fuse can be replaced .
SPECIFICATION :
VOLTAGE : AC 110+10V/60Hz
LOAD : 1000W MAX.(for each outlet)
FREQUENCY: 303.875MHz
DISTANCE : 100feet Max.
FUSE: 10A
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To comply with the FCC RF exposure compliance requirements, this device and its
antenna must not be co-located or operating to conjunction with any other antenna or
transmitter.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
Create Date                     : 0000:01:01 00:00:00Z
Modify Date                     : 2008:08:01 18:53:26+08:00
Page Count                      : 1
Has XFA                         : No
Creation Date                   : 0-01-01T00:00:00Z
Mod Date                        : 2008:08:01 18:53:26+08:00
Producer                        : Corel PDF Engine Version 3.0.0.667
Author                          : Joyce
Metadata Date                   : 2008:08:01 18:53:26+08:00
Creator                         : Joyce
Title                           : APT-1320-T0-J1.cdr
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JA7TM-1320

Navigation menu