Superior Bcf 3885 Users Manual ManualsLib Makes It Easy To Find Manuals Online!

: Superior Superior-Bcf-3885-Users-Manual-121531 superior-bcf-3885-users-manual-121531 superior pdf

Open the PDF directly: View PDF .
Page Count: 8

1

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

HOMEOWNER'S CARE AND

OPERATION INSTRUCTIONS

38" and 43" Wood Burning Fireplaces

P/N 725,024M REV. N/C 11/2001

BCF-3885 BRF-3875

BCF-4385 BRF-4375

MODELS

RETAIN THESE INSTRUCTIONS

FOR FUTURE REFERENCE

CUSTOM SERIES

The information contained in this manual applies to all model fireplaces

identified on this page. This information will help you obtain safe and

dependable service from your fireplace system. Keep this document in

a safe place for future reference.

Before you start your first fire, read this Care and Operations Manual

carefully to be sure you understand your fireplace system completely.

Failure to follow these suggestions could result in hazardous operation

or fireplace malfunction, creating a serious potential for personal injury

and/or property damage.

If you have any questions regarding the safe use or operation of your

fireplace, contact your local distributor.

U.L. Report No. MH8988

2NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

TABLE OF CONTENTS

General Safety Precautions................ page 2

General Information........................... page 2

Fuels .................................................. page 2

Gas Logs ........................................... page 2

Disposal of Ashes .............................. page 3

Softwood vs Hardwood ..................... page 3

Starting a Fire .................................... page 4

Damper Control ................................. page 4

Glass Door Operating Safety

Precautions and Instructions ........... page 4

Combustion Air ................................. page 5

Refractories ....................................... page 5

Maintenance Guidelines..................... page 6

Twice a Year Check-Up ...................... page 6

Creosote Formation and Removal...... page 6

Troubleshooting ................................ page 6

Warranty............................................ page 7

Product Reference Information ......... page 7

Replacement Parts ............................ page 7

Accessory Components ..................... page 7

Replacement Parts ............................ page 8

2. The hearth floor and sidewalls of the firebox

are lined with a brick pattern reinforced refrac-

tory for the look of authenticity and to provide

safety.

3. The metal chimney sections extending from

the firebox top to beyond your roof are two

walled and air-cooled. The inner passage, or

flue, provides the exit for smoke and gases.

4. The flue damper is a two position (fully open

or fully closed) mechanism operated by a handle

found at the center top of the fireplace opening.

It must be open when fire is present so smoke

and gases can escape. It should be closed

ONLY when the fire is completely out – keeping

room air from being lost up the flue.

5. Closed screens prevent fire, sparks and

embers from popping out of the firebox while a

fire is burning. Pull screens back when adding

wood to the firebox.

6. Why use a fuel grate? Besides positioning

the firebed properly, it protects the refractory

floor, back and sides of the fireplace. Further, it

ensures a proper flow of combustion air into

and around the firebed. The grate must be used

at all times when burning. Your warranty may

be voided without the use of this grate.

7. Remember, your fireplace is not intended to

heat your entire home.

FUELS

Never Use Coal in Your Fireplace

Your fireplace system is not designed to be

used with coal derivative products. The com-

bustion process of certain types of coal can

deposit corrosive materials in the fireplace and

chimney system which can lead to premature

product failure. Never use coal as a fuel in this

fireplace system.

Gas Logs

If your fireplace system was installed with a gas

line, you may wish to install one of two types of

gas log sets.

This fireplace has been tested and approved for

use with a decorative gas appliance incorporat-

ing an automatic shut-off device and complying

with the Standard for Decorative Gas Appli-

ances for installation in vented fireplaces, ANSI

Z21.60 (1991) or American Gas Association

draft requirements for Gas-Fired Log Lighters

for Wood Burning Fireplaces, Draft No. 4 dated

August, 1993. Decorative gas appliances may

be installed in these fireplaces. Installation

must be in accordance with the National Fuel

Gas Code, ANSI Z223.1 for compliance with the

revised U.L. 127 Standard.

6. With the fire burning, close the protective

mesh screens to keep sparks and embers IN-

SIDE the firebox.

7. Keep any combustible furniture or decora-

tive pillows at least 36" (914 mm) from the

fireplace opening.

8. Never leave your fireplace unattended while

it is burning.

9. Be careful adding wood fuel to the fire or

handling fireplace tools such as shovels, tongs

or pokers.

10. Never modify or alter your fireplace system

in any way. To do so may create a potential fire

hazard and void the Limited Warranty.

11. The bottom refractory can be cracked by

excessive abuse such as tossing heavy logs onto

the grate or gouging with fireplace tools. Exer-

cise caution when adding wood to your fireplace.

12. DO NOT use a fireplace insert or any other

product not specified by Superior for use with

this fireplace.

13. If you are using your fireplace as a “deco-

rative appliance,” such as with a permanently

installed gas log set, the fireplace damper must

be permanently fixed in the open position.

Listed “vent-free” gas log sets may be used

with the damper closed.

14. Always ensure that an adequate supply of

replacement combustion air from the outside of

the house is accessible to the fire to support

normal combustion. Fireplaces consume large

volumes of air during the normal combustion

process. In the event the home is tightly sealed

with modern energy efficient features, the optional

combustion air kit may not provide all the air

required to support combustion. The manufac-

turer is not responsible for any smoking or related

problems that may result from the lack of adequate

combustion air. It is the responsibility of the

builder/contractor to ensure that adequate com-

bustion air has been provided for the fireplace.

15. Neither the manufacturer nor the seller war-

rants “smoke free” operation nor are we

responsible for inadequate system draft caused

by mechanical systems, general construction

conditions, inadequate chimney heights, adverse

wind conditions and/or unusual environmental

factors or conditions beyond our control.

GENERAL INFORMATION

1. The all-steel, multi-wall firebox is the heat

center of the system. It is well insulated for safe

clearance to combustibles.

GENERAL SAFETY PRECAUTIONS

IMPORTANT! READ AND UNDER-

STAND BEFORE YOUR FIRST FIRE.

1. Use SOLID WOOD only for fuel. It is best to

use dry and well seasoned hardwood. Soft

woods tend to burn very quickly. Solid scrap

construction lumber produces excessive sparks.

DO NOT use treated wood, artificial wax based

logs, charcoal, coal, trash, driftwood or woods

that have been dipped in tar, pitch, pine tar,

creosote, etc. Wood products made with syn-

thetic binders, such as plywood, produce

abnormally high temperatures and sputtering,

smoking fires.

2. NEVER use gasoline, gasoline-type lantern

fuel, kerosene, charcoal lighter fluid, or similar

liquids to start or “freshen up” a fire in this

fireplace. Keep any flammable liquids a safe

distance from the fireplace.

3. Keep the chimney damper open while any

fire or smoldering embers are present .

4. Never block or restrict the room air intake

grille across the bottom front or the warm air

outlet grille across the top front of the fireplace.

5. Use care when selecting window treatments

for windows located near the fireplace. Avoid

using combustible flowing window treatments

such as curtains on nearby windows that are of

sufficient length to be blown in front of an open

flame when the window is opened.

3

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

DISPOSAL OF ASHES

Ashes should be placed in a metal container

with a tight fitting lid. The closed container of

ashes should be placed on a noncombustible

floor or on the ground, well away from all

combustible materials, pending final disposal.

If the ashes are to be disposed of by burial in soil

or other wise locally dispersed, they should be

retained in the closed container until all cinders

have thoroughly cooled.

SOFTWOOD VS HARDWOOD

Softwoods contain about 15 percent highly

flammable resin which generates creosote soot

in the chimney flue. Burning softwood exclu-

sively may not be as desirable nor as safe as

burning denser hardwoods. Many experienced

fire-builders use small amounts of softwood

kindling and newspaper in conjunction with

starting a fire with split hardwood logs. Here are

some guidelines to remember:

1. Softwoods produce fast warming and shorter

fires. Hardwoods burn less vigorously, have

shorter flames and produce steady, glowing

coals.

2. As a general rule, denser woods contain

more potential heat per pound. Most softwoods

offer moderate heat value per pound.

3. Different woods vary widely in flame heights,

flame intensities, smoke characteristics and in

sparking. Most hardwoods do not spark.

4. Most freshly cut “green” wood will not burn

well and will smoke. Green wood can be from

10 to 40 percent less efficient than air-dried

seasoned wood.

5. Moisture and resin found inside unseasoned

wood cells will build up pressure under heat

and explode as sparks.

6. Most wood needs to be seasoned 9 to 12

months to reduce the moisture content and

produce good steady fires. When moisture

content is reduced from 60 to 20%, the gain in

heat potential is nearly 7%.

7. Proper storage of wood, especially during

seasoning, is essential. We recommend that

you:

a. Never store wood on the ground. This will

cause rotting and insect infiltration. Raise wood

on flat rock or scrap wood.

b. Stack wood loosely to allow air circulation.

A face cord is the same height and length as a

standard cord but the depth is only the length

of the logs (12, 18 or 24 inches). A face cord

can contain as little as 25% of the wood found

in a standard cord.

If you buy by the ton, remember that wood

becomes lighter as it dries. When buying green

or wet wood, ask for some extra poundage to

allow for the extra water you will be getting.

9. When comparing woods of the same mois-

ture content and same species, we find most

woods have approximately the same heating

potential per pound.

However, most wood is sold by volume, not by

weight. To determine the best heating source,

look at the density of various wood types.

(Density is the weight for a given size.) The

higher the density, the more potential heat

output. A standard cord has a volume of 128

cubic feet. This figure also includes the air

space between and around the wood. The ac-

tual volume in a standard cord is between 60

and 100 cubic feet; depending on how tightly

the wood is packed.

Assuming that you are comparing two standard

cords of different species but the same volume

and moisture content, the denser species will

provide more BTU’s. The table of wood species/

densities reveals more helpful guidelines.

4'

4'

8'

Standard

Cord of

Wood

Figure 1

c. Store wood where it will not be excessively

exposed to weather, such as under a tarp or

under a roof.

d. Do not stack wood directly against the walls

of your home.

8. Be a knowledgeable wood buyer. There is a

difference in cord sizes. A standard cord stack

of logs is 4 ft. high by 8 ft. long by 4 ft. deep or

the equivalent of this cubic footage, (

Figure 1

).

CAUTION: WHEN USING A DECORATIVE

GAS APPLIANCE, THE FIREPLACE

DAMPER MUST BE SET TO THE FULLY

OPEN POSITION.

These fireplaces have been tested and approved

to ANSI/IAS/AGA Z21.11.2 for use with an

unvented gas appliance having a maximum rat-

ing of 26,000 BTU (for the BRF-3875 and

BCF-3885 models) and 32,000 BTU (for the

BRF-4375 and BCF-4385 models) and complies

with the Standard for Factory-Built Fireplaces,

U.L. 127, when installed with unvented gas log

sets. The limit may be increased to 40,000 BTU

providing that minimum combustible mantle

heights were increased to at least 18 inches

when the fireplace was installed.

Prior to installing any gas log set, (Vented or

Unvented) refer to the fireplace installation

instructions for verification of mantle heights

and placement of combustible materials around

the firebox opening. NEVER INSTALL AN

UNVENTED GAS LOG SET WITH A BTU RAT-

ING GREATER THAN 26,000 BTU (BRF-3875

AND BCF-3885 MODELS) AND 32,000 BTU

(BRF-4375 AND BCF-4385 MODELS) IF THE

COMBUSTIBLE MANTLE PROJECTIONS ARE

LOWER THAN 18 INCHES ABOVE THE FIRE-

PLACE OPENING. Vented gas log sets do not

have restrictions placed upon their BTU rating.

Wood Fuel Pointers

Wood is a wonderful renewable fuel source.

Normally it burns clean, leaving only a minimum

of waste ash, provides comforting heat and can

provide a variety of aromas and visual images.

You will want to know which woods are best for

use. Sometimes you may want a quick, short

fire to offset a morning chill. Soft woods are

preferable in this case. Other times you would

want more slow burning and a uniform heat

output. Hardwoods are preferable for this use.

The amount of heat available from the logs will

be about equal on a weight basis. However,

logs are generally not weighed so the amount of

heat will depend on:

1. The type of wood used.

2. How dry it is.

3. How many logs you put in.

4. The size of the logs.

The last statement means that one big log

weighing 10 pounds has as much heating po-

tential as 10 pounds of twigs. However, air

cannot get at the solid log to feed the fire so the

solid log will burn slowly. While you would get

the same amount of heat out of either fire, the

smaller the pieces of wood and the more air

space around them, the faster the fire will burn.

4NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

STARTING A FIRE

1. To start a fire in a the fireplace properly, first

check the operation of the flue damper.

2. To prevent smoking at start-up, close any

window located near the fireplace when first

lighting a fire. The closed windows may be

reopened once a chimney draft is drawn in the

fireplace.

DAMPER CONTROL

This fireplace is fitted with a manually con-

trolled chimney damper. The chimney damper

should be closed when the fireplace is not in

use to prevent cold air from entering the home

through the chimney system.

Glass Doors

Fully Open or

Fully Closed

(Bi-Fold Doors)

Glass Doors

Fully Open or

Fully Closed

(Twin-Pane Doors)

Figure 3

Figure 2

The appliance flue damper must always re-

main open when operating.

2. The grate in the firebox should be centered

on or over the bottom hearth so your fire can

breath properly. Crumble and twist plenty of

newspapers UNDER the grate and criss-cross

some small dry kindling sticks on top of the

paper or on the bottom of the grate.

3. Build a pyramid of three split logs (split will

start much faster). Arrange the uneven wood

to provide plenty of air space between.

4. Now, light the paper at both sides of the

firebox.

5. Close the screens to prevent the escape of

sparks and embers.

6. Close the damper only when your fire is

completely out and ashes are cold. Keep closed

when fireplace is not in use to prevent unnec-

essary loss of heated or cooled air.

GLASS DOOR OPERATING SAFETY

PRECAUTIONS AND INSTRUCTIONS

These fireplaces may be equipped with glass

doors. Refer to the end of this document for a

listing of the glass doors approved for use with

these fireplaces.

HARDWOODS DENSITY

Alser, Red .41

Ash .49-.60

Aspen .38-.39

Basswood, American .37

Beech, American .64

Birch .55-.65

Butternut .38

Cherry, Black .50

Chestnut, American .43

Cottonwood .34-.40

Elm .60.63

Hackberry .53

Hickory, Pecan .60.66

Hickory, True .69-.75

Honey locust .66 (est.)

Locust, Black .69

Magnolia .48-.50

Maple .48-.63

Oak, Red .59-.67

Oak, White .64-.88

Poplar .42

Sassafras .42

Sweet gum .52

Sycamore, American .49

Tanoak .64 (est.)

Tupelo .50

Walnut, Black .55

Willow, Black .39

SOFTWOODS DENSITY

Bald cypress .46

Cedar .31-.47

Douglas Fir .46-.50

Fir .32-.43

Hemlock .40-.45

Larch, Western .52

Pine .39-.59

Redwood .35-.40

Spruce .35-.41

Tamarack .53

Figure 4

CAUTION: IF A SMOKING CONDITION EX-

ISTS, GLASS DOORS SHOULD BE CLOSED

DURING FIREPLACE OPERATION.

Care and Cleaning of Your Glass Doors

Never clean the glass when the doors are hot.

Do not use ammonia or ammonia based glass

or household cleaner to clean the glass or the

door frame. An ammonia based cleaner will

damage the finish of the glass door.

Clean the glass doors by wiping with a damp

towel followed by a clean dry towel to remove

streaks.

Remove stubborn stains from the glass with a

mild soap solution and a towel dampened with

clean water. Dry with a clean dry towel.

WARNING: IF YOUR FIREPLACE IS

EQUIPPED WITH GLASS DOORS, IT

SHOULD BE OPERATED WITH THE

DOORS FULLY OPEN OR FULLY CLOSED.

IF THE DOORS ARE LEFT PARTIALLY

OPEN, GAS AND FLAMES MAY BE DRAWN

OUT OF THE OPENING, CREATING RISKS

OF BOTH FIRE AND SMOKE. REFER TO

FIGURES 3 AND 4

FOR PROPER OPER-

ATING CONDITIONS.

The damper is controlled through the use of a

control lever located within the firebox open-

ing at the top center just behind the firebox

lintel (

Figure 2

). The control lever snaps into

place at the extreme range of motion, up and

back in the closed position. When pulled

forward and down, the damper is open.

Damper

Closed Damper

Open

Lintel

5

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

COMBUSTION AIR

A proper amount of combustion air is important

for your fireplace. Fireplaces consume large

amounts of oxygen. It is important to allow an

adequate supply of air.

If the fireplace is not equipped with an outside

air kit, it may not obtain sufficient amounts of

combustion air from inside the house or struc-

ture in which it is installed. Therefore, the fire

may draw from an outside air source and pull

air in through the chimney. This may cause

smoke spillage into the room.

Smoke spillage often occurs when a fire is first

started, until the fireplace and the chimney has

had the opportunity to “come up to tempera-

ture” and to begin to function normally. If

smoke spillage problems persist, a window

may be opened just a crack to allow the proper

flow of combustion air to the fireplace.

If your fireplace is equipped with an outside

combustion air kit, keep it open at all times

when fire is burning and close when fire is out

to prevent cold air intrusion.

Combustion Air Control

If your BCF/BRF Series fireplace is equipped

with the optional combustion air kit, the com-

bustion air control lever is located on the left

side of the fireplace opening behind the screen

panel. To open the air damper, pull the lever all

the way out. To close, push the lever all the

way in (

Figure 5

).

• The fire must always be confined within the

boundaries of the fuel grate.

• The fireplace screens must always be closed

whenever the fireplace is being used.

• Never slam the glass door since it could cause

the glass to break.

• Do not build excessively large or hot fires —

scorching or discoloring of the plated brass

trim may occur.

• Extreme temperature changes can cause glass

breakage — do not build a hot fire and close the

glass doors if the doors are cold.

• If the tempered glass pane becomes scratched

or chipped, it creates a weakness in the glass

which can cause the glass to break when

heated. Replace the pane of glass by contact-

ing your nearest dealer.

CAUTION: GLASS AND METAL FRAMES

GET HOT — ALWAYS USE HANDLES TO

OPEN AND CLOSE THE DOORS.

WARNING: BE AWARE THAT SAFETY

GLASS IS UNPREDICTABLE WHEN HOT

AND MAY BREAK, EXPELLING HOT GLASS

INTO THE ROOM. ADVISE ALL FAMILY

MEMBERS TO REMAIN WELL AWAY

FROM THE FIREPLACE WHEN OPERAT-

ING WITH DOORS CLOSED TO AVOID

ANY POSSIBLE PERSONAL INJURY.

IMPORTANT: Plated polished brass glass

doors may have a plastic covering over all

brass pieces for protection during shipping

and handling. The plastic covering should be

removed before installation of the glass doors.

Under the plastic covering is a protective

lacquer coating which should not be removed.

In some instances, if it is removed, irrevers-

ible damage to the brass finish could occur.

Refer to the following for specific information

on plated polished brass.

IMPORTANT: The lacquer coating on the pol-

ished brass glass doors and trim pieces can

be damaged or removed causing corrosion

and/or tarnish. Do not remove the protective

lacquer coating from plated polished doors

and trim. To help protect the finish; use a

non-acidic wax and avoid the over-spray of

acidic/alkali based glass cleaners on the

brass pieces. Please understand that the

heat of the fire will cause the protective

lacquer finish to slightly change to a light

caramel color. Do not be alarmed as this is

a normal occurrence.

Figure 5

The outside air damper should be kept closed

on all fireplaces except when the fireplace is in

operation. If there is no heat present in the

firebox, the air damper should be closed at

night before retiring to prevent intrusion of

outside air into the home.

Closed

Open

WARNING: DO NOT OPERATE THE COM-

BUSTION AIR ACTUATOR UNLESS A

COMPLETE OUTSIDE COMBUSTION AIR

VENT SYSTEM HAS BEEN INSTALLED

WITH YOUR FIREPLACE.

REFRACTORIES

All fireboxes contain a furnace refractory floor,

sides and back. These refractories are rein-

forced with steel, but can be broken by improper

use. Dropping logs on the bottom refractory

and building fires directly against the refracto-

ries can cause premature burnout of these

components. It may easily be repaired or re-

placed at costs far below repair and maintenance

for masonry fireplaces.

Proper care and “burn-in” of the firebox will

prolong the period of enjoyment without exten-

sive maintenance. For the first few uses, build

small fires – not roaring infernos. The materials

used in the refractories contain and absorb mois-

ture. It is important to “cure” the refractories by

building only modest fires. Under normal usage,

it is expected that hairline cracks will appear in

the refractory surface. These hairline cracks do

not affect the safe operation of the fireplace.

Refractories should be replaced when:

1. The crack opens more than ¹⁄₄" (19 mm).

2. Pitting in the surface is extensive and pits

become deeper than ³⁄₁₆" (4.76 mm).

3. Any piece of refractory larger than 2" (51 mm)

in radius and ³⁄₁₆" deep becomes dislodged.

If conditions 1, 2 or 3 occur, the refractory

should be replaced.

MAINTENANCE GUIDELINES

Your fireplace is designed to operate trouble-

free with minimum maintenance. However, like

any fine appliance, it deserves and requires

some housekeeping attention.

Your fireplace will perform better – and cer-

tainly look more attractive to family and friends

– if it is cleaned before each use. Before the first

seasonal use in Autumn and after the last fire in

Spring, it is important to inspect the fireplace

system carefully. We recommend at least two

complete fireplace inspections a year.

6NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Before Each Use

1. Clean the firebox of excessive ashes. Some

owners prefer to leave a small layer to insulate

the cold refractory below the grate which helps

fire starting.

This fireplace has a factory supplied grate at-

tached, it is permissible to remove the grate for

cleaning; however, the grate must be re-at-

tached to the fireplace before the next burn.

2. Keep the fireplace screens clean so combus-

tion air flows freely.

3. Spot check the brick-like refractory for small

cracks. Heat from the fire expands it slightly.

When it cools, it contracts.

TWICE A YEAR CHECK-UP

Normally, twice a year, you should inspect your

fireplace following this list:

1. Inspect the opening in your chimney top and

remove any debris that could clog it. The cap is

usually held in place by four (4) screws, which

remove easily for checking or cleaning the full

length of the flue from above. Remove the

chimney top while wearing gloves to guard

against any sharp metal edges.

2. Inspect the entire flue from the top down for

obstructions such as birds nests, leaves, etc.

This may be done by using a flexible handled

chimney cleaning brush. If the chimney con-

tains offset/return elbows; a soft brush cleaning

from the top down to any elbow and then from

the firebox up to the offset/return section is the

proper method. The beam from a powerful

flashlight will help in this inspection.

3. Look up from inside the fireplace (damper

open) to see any obstructions in the lower flue

area. If present, shut the damper and glass doors

(if installed) to seal the firebox and contain any

soot that might fall. If your do not have glass

doors installed, a damp sheet covering the fire-

place opening and sealed with masking tape will

do. Then clean the flue from the top down (if an

offset system, clean per Step 2) using a proper

size chimney brush with flexible pole sections.

Don’t open the doors or remove the sheet until all

soot has settled. Vacuum, don’t sweep.

4. Check the metal flashing and seals around

your chimney. Seal any cracks or loose nail-

head openings to prevent roof leaks.

1. Remember – always check to ensure your

flue damper is in the open position before

lighting a fire!

2. When lighting your fire, a little smoke may

escape into the room – more likely if the

chimney is cold. To correct this, hold a lighted

newspaper up inside the firebox near the open

flue damper. This will turn around any down-

draft and clear the flue of cold air. As your log

fire burns below, the updraft will improve as

the chimney heats up.

3. Is your fire too far forward? Move it toward

the back with your poker. Keep the fire well

within the confines of your fuel grate.

4. Keep your fire up on the grate and the

refractory below free of excessive ashes. The

fire needs plenty of air movement around the

logs.

5. If smoking occurs an hour or two after

lighting the fire, perhaps your well-insulated

house is too airtight and there is scarcely any

way for replacement air to enter and feed the

fire. Check to see if your outside combustion

air kit (if installed) is open. Check outside to

ensure no obstructions are in front of exterior

air entry. Open a window slightly, open doors

to one or two rooms and see if this stops the

smoking.

6. Is a vent fan, exhaust hood or central

heating/cooling system stealing combustion

air from your fireplace? If their volume is high

enough, this can cause negative pressure and

an unwanted downdraft – and smoking.

7. Is your wood fuel too wet or unseasoned?

Or does it contain some chemical substance

that causes sputtering, smoking and toxic

fumes?

8.

Figure 6

illustrates the correct height of

your chimney top. It is unlikely that your instal-

lation does not adhere to the installation

instructions. However, if not correct, you could

experience an unusual downdraft. Usually,

the best solution is to increase the chimney

height. This may also be necessary if nearby

trees, adjoining roof lines or a hill is causing a

downdraft condition.

9. Remember, your fireplace has been de-

signed as a supplemental heating device only,

it is not intended to heat your entire home.

CREOSOTE FORMATION AND REMOVAL

When wood is burned slowly, it produces tar

and other organic vapors, which combine with

expelled moisture to form creosote. The creo-

sote vapors condense in the relatively cool

chimney flue of a slow-burning fire. As a result,

creosote residue accumulates on the flue lin-

ing. When ignited, this creosote makes an

extremely hot fire.

The chimney should be inspected at least twice

yearly during the heating season to determine

if a creosote build-up has occurred.

If creosote has accumulated, it should be re-

moved to reduce the risk of a chimney fire.

If creosote build-up is found, do not use chemi-

cal chimney cleaners that are poured on a hot

fire. The chemical cleaners can be dangerous

and generally only work on the flue section

nearest the fire, leaving the rest of the flue

unaffected. It is best to take the time to clean the

flue as previously described or have the chim-

ney professionally cleaned by a qualified

chimney sweep.

TROUBLESHOOTING

No Smoking Allowed

Your new fireplace is designed not to smoke if

properly installed and operated per our in-

structions. If you do experience a problem,

following are several things to check:

WARNING: CONTINUED OVERFIRING

CAN PERMANENTLY DAMAGE YOUR

FIREPLACE SYSTEM. SOME EXAMPLES

OF OVERFIRING ARE:

• BURNING QUANTITIES OF SCRAP

LUMBER, PINE BRANCHES, PAPER OR

CARDBOARD BOXES WHICH EXCEED

THE VOLUME OF THE NORMAL LOG

FIRE.

• USE OF ARTIFICIAL WAX BASE LOGS,

TRASH OR OTHER CHEMICALS OR

CHEMICALLY TREATED COMBUS-

TIBLES.

5. Clean the firebox thoroughly by using a soft

brush or equivalent.

7

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Figure 6

WARRANTY

This fireplace is covered by a limited warranty detailed separately from this document.

Retain this manual. File it with your other documents for future reference.

PRODUCT REFERENCE INFORMATION

We recommend that you record the following important information about your fireplace. Please

contact your dealer for any questions or concerns.

REPLACEMENT PARTS

A complete parts list is found at the end of this

manual. Use only parts supplied from the

manufacturer.

Normally, all parts should be ordered through

your distributor or dealer. Parts will be shipped

at prevailing prices at time of order.

12M09 43 ABF

12M07 38 ABF

12M10 43 ABF-BB

Bi-Fold Doors 12M08 38 ABF-BB

Bi-Fold Doors

Your fireplace can be fitted with beautiful bi-

fold doors. Model ABF doors are available for

use with these fireplace. Doors are easily fitted

to the fireplace opening. Use Model 38 doors

with 38 inch fireplaces and Model 43 doors with

43 inch fireplaces. Model ABF doors come with

standard black finish. Model ABF-BB doors

have a beautiful bright brass finish.

10'

2' Min.

2' Min.

Less Than 10'

3' Min.

3' Min.

Forced Air Blower Kit 011781 FAK-1500

Blower Kit

The FAK-1500 blower provides for a constant

velocity forced air circulation feature for your

appliance.

ACCESSORY COMPONENTS

Your Fireplace's Model Number _______________________________________

Your Fireplace's Serial Number ________________________________________

The Date On Which Your Fireplace Was Installed __________________________

Your Dealer's Name_________________________________________________

When ordering repair parts, always give the

following information:

1. The model number of the appliance.

2. The serial number of the appliance.

3. The part number.

4. The description of the part.

5. The quantity required.

6. The installation date of the appliance.

REPLACEMENT PARTS LIST

Models 38 Models 43

DESCRIPTION Part No. Qty. Part No. Qty.

Fireplace Assembly – – – –

Firescreen 090674 2 090675 2

Rod, Screen 011382 2 010234 2

Refractory, Side, Right (Standard) 026042 1 026042 1

Refractory, Side, Left (Standard) 026041 1 026041 1

Refractory, Rear (Standard) 026021 1 026022 1

Refractory Base (Standard) 044991 1 044992 1

Grate 12M79 1 12M79 1

Printed in U.S.A. © 2001 by LHP

P/N 700,024M REV. N/C 11/2001

The manufacturer reserves the right to make changes at any time, without notice, in design,

materials, specifications, prices and also to discontinue colors, styles and products.

Consult your local distributor for fireplace code information.

1110 West Taft Avenue

Orange, CA 92865