Superscan 19TVD4S User Manual COLOR TV/DVD/VCR Manuals And Guides L0406298

SUPERSCAN TV/VCR or DVD Combo Manual L0406298 SUPERSCAN TV/VCR or DVD Combo Owner's Manual, SUPERSCAN TV/VCR or DVD Combo installation guides

User Manual: Superscan 19TVD4S 19TVD4S SUPERSCAN COLOR TV/DVD/VCR - Manuals and Guides View the owners manual for your SUPERSCAN COLOR TV/DVD/VCR #19TVD4S. Home:Electronics Parts:Superscan Parts:Superscan COLOR TV/DVD/VCR Manual

Open the PDF directly: View PDF .
Page Count: 56

TOOOBUF(_ 04.4.7 1:44 PM Page 1

9

I_ T/ /T

[ {NSTRUCC_ONES EN ESPANOL {NCLU{DAS. 1

_ AsaoENERGYSTAR_

L_Y_ Partner, our company has

determined that this product meets

the ENERGY STAR ® guidelines for

energy efficiency. ENERGY STAR ®

is a U.S registered mark

%,.":<</i' "<

A(CESSORIFS 1 PART N().

Remote Control Unit /NE22_

Batteries _2AA Batteries

Owner's Manual [ 1EMN20025

T0005UF(pl-3B).QX3 04.4.7 1:44 PM Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELE( TRI( SHO(K, DO NOT EXPOSE THIS APPLIAN( E

TO RAIN OR MOISTURE.

CAUTION

CAUTION: TO REDU( E THE RISK OF ELECTRI(

SHO(K, DO NOT REMOVE (OVER (OR BACK).

NO LSER SERVICEABLE PARTS INSIDE REFER

SERVI(ING TO QL ALIFIED SERVICE PERSON-

NEL

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE ( ONSTITL TING A

RISK OF ELECTRI( SHOCK IS PRESENT

WITHIN THIS UNIT

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE AC( OMPANYING THE

APPLIAN( E.

IMPORTANT SAFEGUARDS

1oRead instructions-All the sal'cty and operating instructions

should be read before the appliance is operated.

2oRetain Instructions-The safety and operating instructions

should be retained for tmure reference

3°Heed WarningsoAll warnings on the appliance and in the

operating insm+ctions should be adhered to

4.Folbw Instructions-All operating and use instructions

should be tbllowed.

5°Cleaning-Unplug TV VCRiDVD £'om the wall outlet before

cleaning. Do not use liquid charters or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possio

bility of the loss of an amhorization code tbr a CAT\: con-

verter, is not intended to be m_ptugged by the user t:or clean=

ing or any other propose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6oAttaehments-Do not use attachments not recommended by

the TViV(RiDVD umautitcturer as they may cause hazards

7oV_ater and Moisture-Do not use this TViV(RiDVD near

water4br example, near a bath tub, wash bowl, kitchen sink,

or laun&y rob, in a wet basemem, or near a swimming pool,

and the like.

&Accessories-Do not place this TViV(_DVD on an unstable

cart, stand, tripod, bracket, or table The ]A.7 VCR DVD may

fall, causing serious injury to someone, and serious damage

to the appliance. Use only with a cart, stand, tripod, bracket,

or table recommended by the manutitcturer, or sold with the

]_7 VCRiDVD. Any mourning of

the appliance should *:ollow the PORTABLE_CARTWARNING

manuiitcmrer's instructions and _'_IL

should use a mounting accessory

recommended by the manuthcturer.

An appliance and cart combination

should be moxed _ith care.Quick

stops, excessive three, and unex en

su@aces may cause the appliance

and cart combination to overturn.

AMEUBLES- Cot appareil ne dolt SYMBOLE D'AVERTISSEMENT POUR

_tre placd que sur un meuble (axec LESCOMPOSANTES

APPARE]L ET MEUBE A ROULETTES

ou sans roulettes) recommand_ par

le titbricant. Si xous l'installez sur

un meuble 5_roulettes, d@lacez les

deax ensembles avec precautiom

Un arr_t brusque, Putilisation

d'une k)rce excessixe et des sur-

faces irrdgulbres risquem do ddsta=

biliser I ensemble et de b rem_erser

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV VCR DVD and to protect it from over°

heating, and these openings mast not be blocked or cow

ered. The openings should never be blocked by placing the

TV VCRDVD on a bed, solit, rug, or other similar surtitce.

This TV VCRDVD should hexer be placed near or over a

radiator or heat register. This TV VCR DVD shonkt not be

placed in a built-in installation such as a bookcase or rack

unless proper ventilation is prox ided or the manutitcmrer's

instructions have been adhered to.

•7

10.Power Sources-This T\ CRDVD should be operated

only from the type of power source indicated on the mark=

ing label. If you are not sure of the type of power suppl 3 to

?,our home, consult your appliance dealer or loca! po_er

company. For TV VCR DVDs intended to operate trom

battery power, or other sources, refer to the operating

Instructions.

11oGrounding or Polarization-This TV V(R DVD is

equipped _;ith a polarized alternating-current line plug(a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety fen-

tare If yon are ramble to insert the plug tglly into the out-

let try reversing the plug. Itthe plug should still fail to fit,

contact >'our electrician to replace your obsolete outlet Do

not detent the satcty purpose ot the polarized plug.

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be x_alked on or

pinched by items placed upon or against them, paying par°

ticular attention to cords at plugs, convenience receptacles,

and the point _here they exit t}om the appliance.

-2- EN

IB15

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 3

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

LEAD IN

WIRE

ELECTRIC

SERVICE

NEC NATIONAL ELECTRICALCODE

S2898A

13.Outdoor Antenna grounding-If an outside antenna or

cable system is com_ected to the ]_J VCR DVD, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built=up static

charges. Article 810 of the National Electrical (?ode,

AN SI NFPA No. 70, provides ini)rmation with respect to

proper grounding of the mast and supporting structure,

grounding of the lead=in wire to an antepam discharge unit,

size of grounding conductors, location ot antemm=discharge

m_it, connection to grounding electrode,s, and requirements

tbr the grounding electrode (Fig A)

14.Lightning-For added protection for this TV V( RiDVD

recei_ er during a lighming stom_, or when it is leti unat=

tended and unused ibr long periods of time, unplug it from

the wall outlet and disco_mect the antenna or cable system.

This will prevent damage to the TV VCR DVD due to

lightning and powerqine surges.

IS.Power Lines-An omside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or powcr circuits, or where it can P,dl into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be i_ta!.

16.Overloading-Do not ox erload wall outlets and extension

cords as this can result in a risk of fire or electric shock

17.Object and Liquid Entry-Never push objects of any kind

into this TViVCRiDVD tl,a'ough openings as they may

touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any

kind on the ]_7 VCR DVD

18.Servidng-Do not attempt to service this ]N?VCRiDVD

yourself as opening or removing covers may cxpose you to

dangerous voltage or other hazards Refer all servicing to

qualified se_wice persom_el.

DISCHARGE UNIT

(NEC SECTION 810 20)

CONDUCTORS

{NEC SECTION 8/0 2/}

GROUNDCLAMPS

GROUNDING

ELECTRODE SYSTEM

(NEC ART 250 PART H/

19.Damage Requiring Service-Unplug this TV VCRiDVD

from the wall outlet and refer servicing to qualified service

perso_me! under the tbllowing conditions:

a. When the power-supply cord or plug is damaged or ti'ayed.

b. If liquid has been spilled, or object_ have tallen into the

TV VCR DVD

c If the TViVCRiDVD has been exposed to rain or water.

d. If the TViVC_DVD does not operate nomm!ly by follow°

ing the operating instructions. Adjust only those controls

that are covered by the operating instructions, as improper

acljustment of other controls may resuh in damage and will

o,qen require extensive work by a qualified teclmician to

restore the TV VCR DVD to its normal operation.

e. If the TViVCWDVD has been &opped or damaged in any

way.

f When the TVVCR DVD exhibits a distinct change in per-

formance=this indicates a need for service.

2&Replacement Parts-When replacement parts are required,

be sure the selwice technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized sgbstitutions may

result in fire, electric shock, injmw to persons or other haz=

ards.

21°Safety Check-Upon completion of any service or repairs to

this TVVCR DVD, ask the service tedmician to perthrm

routine satcty checks to determine that the TV VCRiDVD

is in proper operating condition.

22°Heat-This TViV(RiDVD product should be situated away

from heat sources such as radiators, heat registers, stoves,

or other products (including amplificrs) that produce heat.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDF BLADE OF PLUG TO WIDF SLOT, FULLY

_NSlaRT.

ATTENTION: POUR EWTER LES CHOCS ELECTRIQUES, INTRODUIRE LA LANE LA PLUS LARGR

DR LA FICH l= DANS LA BORNE CORRESPONDANTE DR LA PRISE laT POUSSER JUSQU'AU FOND.

=3= EN

1BI5

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 4

IRI.{:¢I I

IMPORTANT (OPYRIGHT INFORMATION

Urmnthorized copying, broadcasting, public per%r-

nmnce and lending of discs are prohibited.

This product incorporates copyright protection tech-

nolog_ that is protected by method claims of certain

T_LS.patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technolog3_

must be authorized by Macrovision Corporation,

and is intended for home and other limited viewing

uses only unless otherwise amhorized by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

F(( WARNING- This equipment may gener-

ate or use radio fl'equency energ3; (hanges or

modifications to this equipment may cause

harmful interDrence unless the modifications

are expressly approved in the instruction man-

ual The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to se>

vice this device, due to possible eye injury.

(AUTION: USE OF CONTROLS OR AD,RIST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

( AUTION: VISIBLE AND INVISIBLE LASER

RADIATION VV%IEN()PEN AND INTERLOCK

DEFEATED DO NOT STARE INTO BEAM.

LO( ATION: INSIDE, NEAR THE DECK

MECHANISM

This (lass B digital apparatus coraplies with

(anadian ICES-003.

(let appareil num@ique de la classe B est con-

ihrn-te 'a la norme NMB-003 du (anada.

(AUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO Vv]DE

SLOT. FULLY INSERT.

ATTENTION: POUR }_VITER LES CHOCS

_iLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER .R;SQU'AU FOND.

RADIO-TV INTERFERENCE

This equipment has been tested and %und to com-

ply with the limits %r a Class B digital device, ptu-

suant to Part i5 olkhe FCC Rules. These limits are

designed to provide reasonable protection against

hannftt interlbrence in a residential insmllation.

This equipment generates, uses, and can radiate

radio fiequency energy and, if not installed and

used in accordance with the insmtctions, may cause

harmfi_dinter*Drence to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmfi_d interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interl}r-

ence by one or more of the %llowing measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different fiom that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician tDr help.

-4- EN

IB15

+

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 5

For sa[} operation and safis_itctoUper%rmance of

yottr TV/VCR/DVD, keep the following in mind

when selecting a place for its installation:

* Shield it from direct sunlight and keep it away from

sources of intense heat.

* Avoid dusty or humid places.

* Avoid places with insufficient ventilation thr proper

heat dissipation. Do not block the ventilation holes at

the top or bottom of the unit. Do not place the unit

on a ca<oct because this will block the ventilation

holes.

® Install 1.u!it in a horizontal position.

* Avoid locations subject to strong vibration.

* Do not place tile TV/VCPJDVD nea' strong magnetic

fields.

* Avoid moving TV/VCR/DVD to locations where

temperature differences are extreme.

* Do not handle the power cord with wet hands.

* Do not pull on the power cord when disconnecting

it from an AC wall outlet. (}rasp it by the plug.

* If by accident, water is spilled on yot_r unit, unplug

the power cord immediately and rake the unit to an

Attthorized Sel_ice Center l\_r servicing.

® Do not put yottr fingers or objects into the

TV/VCR/DVD disc loading tray.

* Do not place anything directly on top of the unit.

Moisture condensation nmy occur inside the unit

when it is moved fiom a cold place m a wanr_ place

or after heating a cold room or under conditions of

high lmmidity, ff a DVD is played in a TV!VCPJ

DVD which has moisture, it may danmge the DVD

and TV/VCR/DVD Therefore when the condensation

occurs inside the unih tlal-nthe POWER on and allow

at least 2 hours for the unit to dW out.

The tbllowing symbols below appear in some head-

ings and notes in this manual, with the following

meanings

ITv/vcRI

: Description re_rs to TV!VCR operation (m the

TV!VCR mode).

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of audio CDs

(in the DVD mode).

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

A NOTE ABOUT RE( Y( LING

This product's packaging materials are recyclable and can be reuse& Please dispose of aw materials in

accordance with your local recycling regldations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula=

tions concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other TV!VCPJDVD has the same

serial number as yours. You should record the number and other vital in%rmation here and retain this book as

a pemmnent record of your purchase to aid identification in case of their Serial nurnbers are not kept on file.

Date of Purchase

Dealer Purchase fiom

Dealer Address

Dealer Phone No.

Model No.

Serial No.

o 5 o EN

1(29

T0005UF(pI-35).QX3 04.4.7 1:44 PM Page 6

mI]IPORTAAT SAFEGUARDS _' VERTICAL HOLD ( ONTROL . . .26 MARKER SETUP S< REEN ...... 39

mPRECt UIZO:VS . ............... 4

LO( ATION ................... 5

AVOID THE HAZARDS OF

ELE( TRI< AL SHO(K AND FIRE .5

WARNING .................... 5

SYMBOLS USED IN THIS

MANUAL ..................... 5

m _BLE OF COATE:YIS . ......... 6

mEL4TURES. ................... 7

mOPEtL4TI:VG CONTROLS A:'_

F{ "IV('TIOA_S. .................. 9

mPRE_41t4TIOA" F()R {%'E ....... 11

ANTE NNAi( ABLE

< ONNE( TION ................ 11

< ONNE< TFNG TO FRONT AiV

INPUT ]A<KS ................ 12

INSTALLING THE BATTERIES .. 12

< ONNE< TFKG TO A STEREO

AMPLIFIER EQUIPPED WITH DIGI-

TAL INPUT .[A< KS RE< EIVER . .13

( ONNE( TI_G TO AN AMPLIFI-

ER/RE( EIVER \VITH A DOLBY

DIGITAL DE( ODER (ibr DVD) . .14

TV/VCR SECTION

mSET UPFOR USE ............. 15

SELECTING THE LANG UAGE . .15

(LO<K SET UP

(AUTO MANUAL) ............ 15

DAYLIGHT- SA\'fNG TIME ...... 17

<HAZEL SET UP ............ 18

DELETING (OR ADDING)

<HAZEL(S) ................. 18

mSPE(Z4L PLAYBA(X .......... 27

RENTAL PLAYBA< K .......... 27

AUTO REPEAT PLAYBA( K ..... 27

mSEARCH ..................... 28

ZERO RETURN ............... 28

PI( TURE SEAR< H ............ 28

TIME SEAR< H ............... 28

INDEX SEAR( H .............. 29

mSPE(ZAL F_ATURES; . ......... 29

REAL TIME TAPE < OUNTER . . .29

AUTO REWIND-E.fE< T ........ 29

mRECORDkYG ................. 30

NORMAL RE< ORDING ........ 30

SKIPPING UNWANTED S< ENES

DURING RECORDfNG ......... 30

OTR (One Touch Recording) ...... 31

<OPYING A VIDEO CASSETTE

(Requires a V<R or camcorder) ...31

mTIMER ...................... 32

AUTOMATI(

TIMER RE< ORDING .......... 32

TIMER PROGRAM EXTENSION .33

HINTS FOR AUTOMATI< TIMER

RE< ORDING ................. 34

AUTO RETURN. .............. 34

SLEEP TIMER ................ 34

mOA"SCREEA: DISPLAY ......... 35

m('ABLE CHA:_]VEL

DESIG:_I4TIO]_9 .............. 35

DVD SECTION

mSTE(gAL PLAYBA(_ FIiYCIION . . .40

REPEAT ..................... 4(I

PR(3GRAM ................... 40

RANDOM PLAYBACK ......... 40

m(_4NGLYG THESETTINGS ....41

SUBTITLE LANGUAGE ........ 41

AUDIO LANGUAGE ........... 4 l

STEREO SOEIND MODE ........ 4 l

< AMERA ANGLE ............. 41

BLA<K LEVEL SETTING ....... 41

VIRTUAL SURROUND ......... 41

mTHE ON-S(_EF3" L\TOR]L4ITOA'...42

m(_4:VGLYG THE D_D SETUP

FEEMS ................. 43

LANGUAGE SETTING ......... 43

DISPLAY SETTING ............ 44

AUDIO SETTINGS ............ 44

PARENTAL ( ONTROL ......... 45

INITIALIZE .................. 45

mTROUBLESHOOTL\:G G{JDE ...46

m 3L4LYTEA_4N(_ ............... 49

DIS( HANDLING ............. 49

mSPE(ZFI(IIHONS ............. 50

mESPAf/OL .................... 5**

m 1_{4RIt4NTY ........... Back Cover

mT_ OPERATIO:Y . .............. 19

\\½T< HING A TV PROGRAM ...19

DEGAUS SING ................ 19

PI( TURE CONTROL ........... 19

<LOSED < APTION SYSTEM .... 20

X-(HIP SET UP ............... 21

mMTS(3fldti-(7*annel Television

sound)S]STE3I ............ 23

CHECKING THE SELE( TED

MTS MODE .................. 23

MTS RECORDING MONITOR

MODE ...................... 23

SELE<TING THE MTS SYSTEM .24

m _TDEO 0tSSETTE ............. 25

mPLAYBA(;¥ ................... 26

NORMAL PLAYBA< K ......... 26

TRA< KFNG AD/USTMENT ..... 26

SLOW MOTION .............. 26

STILL PICTURE .............. 26

mABOUT THE DISCS'. ........... 36

PLAYABLE DIS(S ............ 36

DIS( TYPES ................. 36

mPLA]gA_A DISC .............. 37

BASIC PLAYBACK ............ 37

GENERAL FEATURES ......... 37

DIS( MENU ................. 37

TITLE MENU ................. 37

RESUME .................... 38

PAUSE ...................... 38

STEP BY STEP PLAYBACK ..... 38

FAST FOR\\ L%RDiREVERSE

SEAR( H .................... 38

SLOW FOR\_ARD /SLOW

REVERSE .................... 38

SE54RCH F{_VCTIOA'. .......... 39

TRACK SEAR( H ............. 39

TITLE /CHAPTER SEARCH .... 39

TIME SEARCH ............... 39

-6- EN

IC29

+

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 7

I TV/VCR Mode I

* HbFisystem-The Hi-Fi stereo recoMing/playback

system offers you excellent sound quality.

* Rotary&head Record/PlaybackSystem-Fourheads

video ensure excellentpicrare quality aad specialeffects

playback

* hdex Search-Fastoforwards to start of next recording,

* SmowNotion=View recorded material at slower

titan nomml speed.

*infrared remote controm

®Trilingual on screen TV/VCR setup display in

English or Spanish or French

® Reamtime counter-This shows the elapsed recording

or playback time in hours, minutes and seconds_ The

.... indication will appear when the tape is rewound

fmther titan tl_e rope counter position "0:00:00"_

® i8i channel capabiHW TV tuner with direct stao

tion access-(A converter may be necessary to

view scrambled cable channels 0

* Auto Clock Setting=Allows you to set the clock

ftmction from a PBS (Public Broadcast Station)

broadcast station.

* Closed caption system-You nmy view specially

labeled (co) TV programs, movies, news, prere-

corded ropes, etc. with either a dialogue caption or

text display added to the program.

* Auto power on and off system-Automatically

rams on the TV/VCPJDVD when you insert a cas-

sette, turns off after auto-rewind and ejects when

tl_e beginning of the rope is reached.

® Auto rewind when the end of a tape is

reached=This Amction doesn't occur when using

timer recording.

* Smooth mode change-TV/VCR mode and DVD

mode automatically changes.

®2 Step picture search operation=You can view a

video material at a high speed or super high speed

in either a forward or reverse direction in LP and

SLP mode. For SP mode only high speed applies.

®Three different playback tape speeds : SP/LP/SLP

®Two different recording tape speeds : SP/SLP

*Auto Head Cleaner=Automatically cleans video

heads when you insert or remove a cassette.

* Zero Return=The tape returns to the counter posi-

tion of 0:00:00 by rewinding or *hst forwarding.

* StiH-"Freezes" the picml-e at aW time, %r close

viewing of a particular scene.

* Digital Auto Tracking (DTR}=Automafically

adjusts tracking t\_reach rope you play.

* Rental Nay mode-Improves playback picture

quality from worn ropes, such as rcntal tapes.

* Auto repeat-Allows you to repeat the playing of a

rope indefinitely without pressing tl_e PLAY button.

* Time search-Lets you set the TV/VCR/DVD to

advance tl_e rope by entering the desired playback

tirne you v_-a1111oskip.

* OTR (One Touch Recording)-Instant tirned

recording flora 30 to 480 minutes is possible at the

push of the REC/OTR button_

® i Year, 8 events (including Dally and Weekly

Timer Recording}=The built-in timer allows you to

record up to 8 programs at different times on dif

fcrcnt channels up to i year in advance. The Daily

timer allows recordings 1obe made of daily broad-

casts and the Weekly timer allows recording to be

made once a week up m the end of the rope.

* Auto return-After timer recording is finished, the

TViVCRiDVD can return to the begirming of the

recording.

®Smeep timer=Allows you m have the TV VCRiDVD

automatically turn off at a desired time.

* Timer Program Extension=A!lows you to shit_ the

time schedule %r automatic timer recording.

* VoCHP=Enables parents to prevent their children

from watching inappropriate nmterial on TV

-7- EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 8

[DVD Node ]

® Dolby Digital sound

This TV/VCWDVD can output an audio signal from

the digital audio output jack Dolby Digital.

®Still/fast/Mow/step playback

Various playback modes are available including still

picture, fast %rward/reverse, slow motion and step

flames.

®Random playback for audio CD

This TV!VCP,!DVD can shu[_le the order of tracks

to play them in random order.

® Program playback for audio CD

Yuu can prugram the order of tracks to play in any

desired order.

®DVD menus in a desired language

Yuu can display DVD menus in a desired langaage,

if available on a DVD.

®Screen saver/Auto power-off functions

The screen saver pru_am starts when there is no

input from the TV/VCR/DVD fur five minutes in the

stop mode_ When the screen has been in opperation

_br 15 mim_tes, the power will automatically turn off

®Subtitles in a desired language

Yuu can select a desired Iangmage _hr the display

s:ubtitles if that language is available on a DVD disc.

®Selecting a camera angle

Yuu cap. select the desired camera angle, if a DVD

disc contains sequences recorded from different

angles.

®Choices for audio language and sound mode

You can select the desired audio langlmge and sound

mode, if different languages and modes are available

on a DVD disc.

o Parental Bock

You can set the control level to limit playback of

DVD discs which may not be suitable for childrem

o Automatic detection of discs

This TV!VCR/DVD automatically detects if the

loaded disc is a DVD or audio CD.

®On-screen display

In%nnation about the CUlTentoperation can be dis=

played on a TV screen, allowing you to confirm the

CUlTendy active functions (such as program play-

back), on the TV screen using the remote control.

®Search

Chapter search /Title search /Track search /Time

search

o Repeat

Chapter /Title /Track /All /A=B

o Marker

The location on a specific DVD disc designated by

the user to be accessed later.

®Resume Play

User can return to the location at which play was

stoppe&

®VirtuaJ Surround

® 8it rate indication

o DRC {Dynamic range control)

Yuu can control the range of the diffcmce between

the loudest and so*iest sounds.

NOTE:

* Wc do not recommend the use of universal remote controls. Not all of the ffmctions of this unit will be con=

trolled with the universal remote control

It"you decide to use a universal remote control with this TV/VCWDVD, please be aware that the code nun1=

bet given may not operate this TV!VCR/DVD. In this case, please call the nmnufacmrer of the universal

remote control

-8-EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 9

-TVfVCRIDVD FRONT PANEL - [Fig.l]

435 6789

- REMOTE CONTROL - [Fig. 2]

1

22

23

24

25

26

(DVD)3

(TV/VCR) '

13

27

28

29

3O

31

32

33

PICTURE SLEEP

SPEED CRESET VSURR MUTE

<:b cO

DISpLAy ....... _//

45

44

11

43

42

3 (DVD)

5

41

4O

39

38

37

36

35

34

1. POWER Button [TV \'CR El5 /DVD 237]

Press to turn the power on and off.

2.VOLUNE (VOL) ZI..gVButtons

Press to control the volume level.

3.SKIP Buttons (for BVD)[R38]

Press once to skip chapters or tracks_

Press and hold to change tbrward or reverse play-

back speed.

4. PLAY Button [TV I'(R E26 /DVD P37]

Begins playback of the disc or video tape.

1011 12 13144 15 16 17 1819 20 21

5. STOP Button [TV \'CR R26 /DVD R37]

Stops operation of the disc, (or fiont panel)

Stops operation of the disc or video tape_

(remote control)

6. OPEN/CLOSE Button [DVD P37]

Press to open disc tray to insert or remove a disc.

7. Disc loading tray

8. DVD mndicator

Illumilmtes during DVD mode,

9°SELECT Button

Press to change to TV!VCR mode, A/V input or

DVD mode.

10.TV/VCR hdicator

Illuminates during TV/VCR mode_

11. CHANNEL (CH.) _,/V Buttons

Press to select memorized chalmeh

12. Recording hdicator

Flashes during recording Illuminates in the Stand=

by mode fur F'imer Recording

13. REC/OTR Button {Front Pane[) [TVV(R P30, 31]

Press to start malmal recording Press repeatedly

to begin One Tuuch Recording.

RECORD Button {Remote Contro{) [TV V(R P30]

Press to begin manual recording

14. REW Button (for TV/VCR) [TV VCR P26]

Press to rewind the tape, or to view the picture rapid-

ly in reverse during playback mode. (Rewind Search)

18. F.FWD Button (for TV/VCR} [TV \'CR R2(J

Press to rapidly advance the rope, or tO VieW the

picture rapidly in tbrward during playback mode.

(Forward Search)

16. STOP/EJECT Button [TV VCR R28]

Press to stop the tape movement. Press in the Stop

mode toremove tape _}om the TV/VCR/DVD.

17. Remote sensor window

18. HEADPHONE Jack

Tu connect headphone (not supplied) fur personal

listening

19. VmDEO input Jack

Connect tu the video output jack of a video

camera, VCR or video game system.

-9-EN

1(:29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 10 (_

-TVlVCRtDVD REAR PANEL - [Fig.3]

48

20. AUDIO L/R input Jacks

Connect to the audio output jacks ufa video

camera, VCR or video game system.

21. Cassette compartment

22. PICTURE Button

Press to adjust the picture.

23. Number Buttons

TV Mode:[P lS]

Press two digits to directly access the desired

channel.

Remember to press a "0" before a single digit

channel.

+100 Button-

Press to select cable channels which are equal or

greater than manber 100.

DVD Mode:

Press to enter the desired nmnber.

+10 Button-

Press to enter the desired nmnbers which are

equal or greater than number 10.

24. PAUSE Button [TVVCR R26 DVD R38]

Pauses the current disc or tape operation.

28. SPEED Button [TVVCR R30]

Press to choose the desired recording speed:

SP/SLR

26. C.RESET Button [FVVC;RP28]

Press to reset counter to 0:00:00.

Press to cancel a setting of timer progqam. (See

page 33.)

27. DISPLAY Button

TV/VCR Mode:

Display the counter or the CU1Tentchalmel nm'nber

and current time on the TV screen.

DVD Mode:lEd2]

Displays the current slams on the TV screen fur

checking proposes.

28. SETUP Button [TVVCR R15] [DVD R43-45]

Press to enter or exit the TV mem_ or DVD setup

mode.

29. TITLE Button [DVD P37]

Displays the title menu.

30. CLEAR Button

Resets a setting

31. MODE Button [DVD Rd0]

Activates program playback or random playback mode

32.SEARCH MODE Button[DVDR391

Press to locate a desired point.

33. AUDIO Button [DVD Rdl]

Press to select a desired audio language or sound

mode.

34. SUBTITLE Button [DVD Rdl]

Press m select a desired subtitle langstage.

35° REPEAT Button [DVD Rdl]

Repeats playback of the current disc, title, chapter

or track.

36.ANGLE Button(DVD mode) [DVDPdl]

Press to change the camera angle to see the

sequence being played back from a different angle.

37. AoB REPEAT Button[DVD Ed0]

Repeats playback of a selected section.

38. RETURN Button

Retmns to the previous operation in the DVD

setup mode.

39. ENTER Button

Press to accept a setting.

40.Arrow Buttons

TV/VCR Mode:

Press to select a setting mode fi'om the menu on

the TV screen.

P,vss to select or adjust from a particular menu.

DVD Mode:

Use when making settings while watching the

display on a TV screen.

41. DiSC MENU Button [DVD R37]

Displays the menus in the DVD.

42. M SURR {VIRTUALSURROUND) Button [DVD Rdl]

Sets virtual surround on/off

43. MUTE Button

Mutes the sotmd. Press it again to resmue sound.

44. SLEEP Button[TVVCRP34]

Sets the Sleep Timer.

45. SELECT Button

Press to switch TV/VCR and DVD mode. You can

see the mode (TV/VCR or DVD) on the fiont

panel indicator.

-10- EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 11 (_

46.ANT. in Jack

Connect to an antenna, cable system, or satellite

system.

47. Power cord

Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to

avoid breaking a wire beibre you connect

to a standard AC outlet.

48. COAXIAL digRal audio out Jack {OVO, CO, MP3

Audio only)

Connect to the digital input of an external

amplifier or receiver

g,s

Satellite Box or

Cable Box (Not supplied)

EFrom Cable System or

Satellite Dish

or VHF/UHF

__>_-_ VHF/UHF Antenna

<_ (Not supplied)

.Lt VHF Antenna (Not supplied)

UHF Antenna

(Not supplied)

or

J [Fig. 41

Flat twinqead cable

In some areas it will be necessa W to use an outdoor

antenna.

Use this connection if your cable system connects

directly to your TV!VCR/DVD without a converter

box.

By using this connection you can:

1) Use the TV!VCR/DVD rcrnote to select channels.

2) Program one or more unscrambled channels _br

Automatic Timer Recording.

NOTE: This TV/VCR/DVD will ONLY record and

view the same channel.

DL;?<;k",I J?' LLR Ji !z;v)R 7/iL ;/;!L

/f:(,yg

If yore cable set_ice snpplies you with a converter

box or if you use a satellite system, you can use the

basic connection shown in the illustration.

By using this connection you can also record scram=

bled channels. However, channel selection must be

made with the converter box or satellite box. This

means that channels cannot be changed using the

TV/VCPJDVD Remote Control. Unattended timer

recoNing is limited to one channel at a time.

Anten_ta/( able Connections

( ontinued on the Next Page.

-11- EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 12 (_

TO RECORD AS( RAMBLED/UNSCRAM-

BLED CHANNEL

1. Set the TV!VCWDVD channel selector to the out-

put channel of the Cable Convel_rer Box or Satellite

Box. (Ex. CH3)

2.Select fl_e channel to r_cord with yore Cable

Converter Box or Satellite Box.

Note to CATV system installer:

This reminder is provided to call the CATV sys-

tem insmller's attention to Article 820°40 of flue

NEC that provides guidelines for proper ground-

ing and in particulac specifies that the cable

ground shall be connected to the grounding sys-

tem of the building as close to the point of cable

entry as practical.

l)Open the battery compartment cover by pressing

the cover on the remote unit in the direction of the

arrow.

2)Insert 2 "AA" penlight batteries into the butte17

compartment in the direction indicated by the

polarib_ (+/-) markings.

3)Replace the cover.

When you watch a program recorded on an anofller

source (VCR, video camera, video game systcm), use

the audio/video input jacks on fl_efiont of the

TV/VCR/DVD.

Connect fl_eaudio/video output jacks of another

source to the AUDIO L/R and VIDE() jacks of this

TV!VCR/DVD.

Then press the CHANNEL button A or T until

"AUX" appears on the TV screen.

NOTE:

* When you connect a monaural VCR (another

somce) to this TV/VCR/DVD, connect the Audio

output jack of the monaural VCR (another source)

to the AUDIO L jack of this TV/VCR/DVD. The

audio will output in bofl_ L and R chalmeI equally.

To the audio

............................................................................................................................output jacks

JAnother source] !-_ ::-_-=__

aEAPao_a \lOEO [] aao []

Audio/Video

[ _-_ cables

(not supplied)

etc.

output jack

@@@

TV/VCR/DVD]

[Fig. 51

-12- EN

1(29

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 13

Use an audio coaxial digital cable available at retail stores for the audio connections.

Amplifier receiver equipped

To COAXIAL DIGITAL

AUDIO iNPUT jack

,O

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

(only DVD, CD, MP3 AUDIO OUT)

[Fig. 6]

NOTES:

* The audio source on a disc in a 5. i channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

* Be sure to turn off the power to all components in the system be/bre connecting another component.

* Ret_r m the Owner's Manuals _\)rthe components to be connected to the TV!VCWDVD.

* Set Dolby Digital to OFF for audio output in the setup mode. Playing a TV!VCR/DVD using inconect set-

tings may generate noise distortion and may also danmge the speakers.

* This will allow 2 channel DVD sound to be listened to on the amplifier/receiver.

- 13 - EN

1(29

T0005UF(pl-35).QX3 04.4.7 1:44 PN Page 14 (_

To use this TV/VCWDVD to play a DVD disc in a 5A channel Dolby Digital surround fom3at, the

TV/VCtL/DVD can output a DOLBY DIGITAL Data stream li'om its COAXIAL digital audio out jacL By

hooking the TV/VCtUDVD up to a Dolby Digital decoder, you can enjoy high-qualiv surrom3d sound as

enjoyed in movie theaters.

Use audio coaxial digital cables available at retail stores l\_r the audio connections.

[Fig. 7]

NOTES:

* Be sure to tLtrn Off the power to all components in the system before connecting another component.

*Rel_r to tile Owner's Manuals for the components to be connected to the TV/VCR/DVD

* If connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON tbr audio output in the

setup mode. (See page 44 to set DOLBY DIGITAL to ON.)

* Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup

mode. Playing a TV!VCR/DVD using inconect settings may generate noise distortion and may also damage

the speakers.

* Only DVD, CD, MP3 sound is available using this jack.

Nanufactured Under license from Oolby Laboratories. "OoJby" and the douNe,O symbol are

trademarks of Dolby Laboratories.

-14 -EN

1(29

TOOOSUF(pI-3B).QX3 04.4.7 1:44 PM Page 15

_ %" _..... U b_.

x

Plug the TVtVCWDVD po_aer cord into a

standard AC outlet.

NOTE:

* If any digits appear in the corner of the

screen, press the POWER button without unplug=

ging the po'_xer cord.

Make sltre °..

* Press the SELECT button to select TV/VCR mode or

make sure TVtVCR lights on.

* Press tM POD%R btltto11to ttlm on the T_/VCPwCDVD.

NOTE: This ti_mction effects only the language on

the screen menu and not the audio source.

ITV/VCR]

The TV/VCWDVD clock must be set correctly belbre

VCR timer recording is possible. It is suggested that

the clock be set manually when lirst setting up the

TVtVCR/DVD, then set to [ON] the auto clock sere

ring which will periodically coIrect the setting if nec=

essar>

NOTE: If you cannot receive a station with time

siglmlS, auto clock setting cannot be performed. Use

manual setting only.

Make slate ...

* The TV/VCRtDVD is mined on.

2See<2 'LANGUAGE"

Press the SETUP button on the

remote control.

Press the Arroyo button .A or V to

point to '%ANGUAGE".

MENU

T_P,_ER pRO6 RA_,4r._INCS

PlOTURE CONTROL

SETT_N6 CLOCk<

CHANNEL SET UP

USERS SET UP

V C;HIP SET U_ _ *

_Ab*6UAOa EN6L_SH

CAPTION IOF"_] [_

ZERO RETURN

T_MESEAROH

,s : /;:;,s_Aba< L < ,. #...

Select ENGLISH , ESPANOL = Spamsh or

FRAN(iAIS French usm_ the ENTER button.

Press the SETUP button on the remote control to

return to TV mode.

NOTE: If"for some reason the menu is in Spanish or

French, press the SETUP button on the remote control,

press the A_Towbumm _ or _ to point to "IDIOMA

[ESPAN-OL]" or "LANGAGE [FRAN(iAIS]", then

press the ENTER button, then press the SET[PP button

on the remote control.

DATE May 6th, 2004

SETTING TIME 5:40PM

MENU

Press the SETUP button on the .......................

p GTURE CONTR©L

remote control. SETTiN¢' CLOCK

CHANNEL "ET UP

USERS SET UP

Press the Arrow button _ or _ to ...........

LAN®//AGE [ENGL Sbl]

CAPTION IOFF]

point to '_SETTING CLOCK"..,M_ .........._o.

Then press the ENTER button.

2 _!:5{!e{7:{_<_ _ < <,</.# ;:_;::'"

x,J/._,.. ,, _,% ;292

Press the Arro'_ button _ or _ to ..............

point to "MANUAL CLOCK .......... pN_

AUTO CLOCK CH SEARCH

SET . ,oToo_o°,o, [0,

MANUAL CLOCK SET

D S • [OFF]

Then press the ENTER button.

Press the Arrow button _ or _ ....................

until your desired month appears. ,.............

5

(Example: May -> 05) HOUR MINUTE

Then press the Arrow button _.

(Or press the Arrow button _ to

go back one step.)

_{ Seec{ _he day

Pressthe Arrow button _ or _ ................

until yore' desired day appears. ,,............

(Example:6th-+06)

Then press the Arrowbutton _. ...........

1151 EN

1(29

4>

TOOOBUF(pl-35).QX3 04.4.7 1:44 PM Page 16

qANUAL OLOCK SET

Press the AKow button A or _ ..............

until yotlr desired year appears. 0_, o.......

(Example: 2004) ............

Then press the AKow button _.

8{(C _%e O_/ ,_AnUAkOLOC_SE_

Press the AKo_ button _ or _ ..............

until your desired horn appears. .... ..........

(Example: 5, PM) "_ _."_

Then press the Arrow button _1_

_,:>, e;q {<! h4ANUA[ {{ OOK _ET

Press the Arrow button _ or _ ...............

until the desired minute appears, o............

(Example: 40) .... ,_....

O5 40 PM

{:?Start ecock

Press the SETUP button on the

remote control.

Although seconds are not displayed,

they begin counting from 00 when

you press the SETUP button on the

remote control. Use this t_ature to synchronize the

clock with the comect time.

NOTE:

When unplugging the AC cord or if there is a power

£hilure for more than 3 seconds, you nmy have to

reset the clock.

70 l: /Lci '_,,(7/!<7;(?{K VL77/',_(7

If you want to change the clock,

1) Follow steps [1] and [2].

2) Select where you want to change using the Arrow

button _.

3) Enter correct numbers using the Arrow button

or _.

4) Press the SETUP button on the remote control to

start the clock.

PLEASE NOTE:

If there is no local PBS (Public Broadcast station) in

your area or on your cable system, select "AUTO

CLOCK" and press the ENTER bumm to tuln [OFF]

this function. Then you can manually adjust the

clock.

* The TV;VCWDVD is tamed on.

* Confim_ the TV!VCPJDVD is receiving ft RE

(Radio Frequency) signal from either an antenna or

cable system connection using the ANT. terminal

on the rear of the TV!VCR/DVD.

NOTE:

* Ifa cable converter box is being used, nmke sure it

is powered on.

* You must use the TV/VC_/DVD remote control to

perform the clock setting procedure.

* If the TV/VCR/DVD is connected directly m a

cable converter box or satellite box, the local PBS

station must be selected on the cable box itself and

the TV/VCPJDVD must be set to the output chan-

nel of the cable convemer box or satellite box (usu=

ally channel 3 or 4), to be able to set up or correct

the clock automatically.

t©LOCK'" MENU

Press the SETUP button on the ....................

pOT[/RE OONTRO[

remote control, sEr,_o_oo_

CHANNEL SET UP

USERS SET UP

Press the Arrow button A or _ to ........_A_O_E_,%_,s_

_ • ,, OAPT ON [OF]

select SETTING CLOCK . •.........

TIME SEARCH

Press the ENTER button to enter

'_SETTING CLOCK" menu.

2Se ANO ?.OCt:;' s:; ON}

Press the AKow button _ until

'%UTO CLOCK [ON]" appears.

P._.,# >a, _/ % , {<g g s/'v_"{'

Press the Arrow button _ to select

_%UTO CLOCK CH SEARCH". ............

AUTO COOK /ON]

Press the ENTER button. _...............

AUTO COCK CH / 02 ]

MANUAL CLOCK SET

* The TV/VCR]DVD is nov .... _o_

searching for the station which

contain the auto clock set signal.

The search %r a signal may take up to 20

seconds per channel.

* " appears at the lower left of ...................

08 0 _3

the screen _xhen the search has

ended.

* Auto Clock station- write do-vxn

the number(s) that appear on the

screen. These are the auto clock

station(s) in your area. See step [4] on page i7.

* It"no number(s) appear on the TV screem there are

no stations in your area which contain the Auto

Clock signal. Auto Clock Setting is not possible.

Please use Manual Clock Setting on page 15.

Press the SETUP button to exit the screen.

1161 EN

1(29

4>

T000BUF(pl-3B).QX3 04.4.7 1:44 PM Page 17

NOTE: During Auto Clock CH Search, the picture

may be distorted, this is normal.

At_}<<i_{ <,Oc!,<S{:[ [_$9"_:;_

Press the SETUP button on the remote controh

Press the Arro'_x button & or V to MENU

select "SETTING CLOCK". .......................

p CTURE CONTROL

SETTING CHOCK

Press the ENTER button to enter .............

users SeT UP

"SETTING CLOCK" menu. v..........

LAN®//AGE [ENGE 8H]

CAPTION I©FF]

Press the Arrow button T to select ..........

TIME SEARCH

"AUTO CLOCK CH'.

Press the ENTER button or the .............

Arro-vxbutton _ or I_ until you ......... _o_

AUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 45]

MANUAL COCK SET

locate Auto Clock Set station nmn= o_, _o<

bet. See step [3] on page 16.

Press the SETUP button to exit the

screen.

ITV/VCR]

Select this feature and the TV/VCR/DVD's clock

automatically will advance one hour in April, then

reverse one hour in October.

When Daylight-Saving Time is ON, the clock will

change autonmtically as follows:

* First Sunday of April : At 2 AM the clock irene=

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM

will not record.

* Last Sunday of October : At 2 AM the clock

immediately changes to i AM.

3/Iake sm_e ...

* Press the POWER bl._tlo11to n__l._t_ol!the TV/VCI_CDVD.

J See<; !{;I;::T"!'_,t_,CLOC/<'

mENU

TIMER pRO®RAMMING

PICTURE CONTROL

SaTTIN_ CLOC_

CHANNEL SET UP

USERS SET UP

v Clip SET UP

LANt, UAGE {ENGLISH}

CAF'T ON [OFF]

ZERO RETURN

Tl,_Z SEARCH

9Set < 7 _ } < ,- _":,,, -">1

Press the Arrow button & or T to .............. "

point to "D.S.T.'. ........ _o_

AUTO CLOCK CH SEARCH

Then press the ENTER button until ........... ,0_]

,_ANUAL CL©CK SE /

[ON] appears, o_ ,_°'_

Press the SETUP button on the remote control to

return to TV mode.

Repeat steps [1] to [2], select [OFF] using the

ENTER button.

1171 EN

1(29

d>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 18

You can program the tuner to memorize all the chan-

nels you receive in your area.

NOTE: Channel memo17 programming is NOT

needed when connected to a cable box or satellite

box. Just select the TV/VCWDVD channel selector

to the output chalmeI of the cable box or satellite box

(Ex CH3), then select the channel to be viewed on

the Cable Box or Satellite Box.

Ma_sure...

* Press thePOW_Rbum)ntommonthe TV/VCR,©VT).

'J Seec ©/4A/_b£i_}£LSKT UP*

Press the SETUP button on the ......

TMER pRO{=RAMMING

remote control. PICTURECONTROL

SETT NG CL©CK

CHANNEL SET UP

Press the Arrow button & or T to USERSSETUP

v c_lp SET UP

point to _CHANNEL SET -UP'. ,__,oN........[o_......

ZERO RETURN

Then press the ENTER button. •............

Be!_ auoc :_roga*_s_,,g

Press the Arrow button A or V to c..,N__ o_

point to "AUTO CH PROGRAM- _.......... _,:_,_

M1NG'. ...........................

Then press the ENTER button.

The tuner scans and memorizes all

the active channels in your area.

The tuner stops on the lowest memorized channel.

* When AUTO CH PROGRAMMING is activated

where there is no TV signal input, "NO TV SIG-

NALS" will appear on the display after the com-

pletion of the channel scanning.

* The TV!VCWDVD rnay recognize TV channels to

be CATV channels if reception conditions are poor.

If this happens, check the antenna connection and

t_7 the AUTO CH PROGRAMMING again, or

wait until reception conditions are better and then

W it again.

The channels you no longer receive or seldom watch

can be deleted fiom the memory. (Of comse, yon

can add the deleted channel into the memory again.)

Press the SET-UP button on the ......

TIqER pROGRAMMIN®

remote control, p,o_o_oo_o

8K•TING COOK

CHANN£L SET UP

Pressthe A_ow button _ or V to .... ......

v Clip SET UP

1 _3 LANGUAGE [ENGLISH}

point to "CHANNEL SET UP ....... _o<

ZERO RETDRN

Then press the ENTER button. •..........

2 Seee A©©/©E_LKT/i? ©_s, c............

Press the Arrow button _ or V to _ooo__•_,_<o_•,,)

point to "ADD/DELETE CH'. .....................

Press the ENTER button.

_f Kite< t}e dew, red eha ne

Press the Arrow button A or

until your desired channel number

appears. (You can also use the 0_

number buttons or the CHANNEL

button _ or V to enter it)

(Example: CHS)

* You must precede single-digit channel numbers

with a zero (Example: 02 ... 09).

* When selecting cable channels which are higher

than 99, press the _100 button first, then press the

last two digits. (Example: to select channel !25,

first press the +100 button then press "2" and "5').

_Oee!e(o_ add} _om( _o} e_'_oy

Press the ENTER button. The channel ntlmber

changes to light red. The channel is deleted from

n]en]ory.

*To delete another channel, repeat steps [3] and [4].

* If you press the ENTER button again, the channel

is memorized again.

Added channel: Light Nue.

Deleted channel: Light red.

_ Ex see€an e se p '_ode

Press the SETUP button on the remote control to

remm to TV mode.

NOTE: To confirm that channel(s) has been deleted

or added, press the CHANNEL button *_or V.

IS EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 19

_' o 7V VO_sU[V©

Pressthe POWER button to mm on the

TV!VCX/DVD.

2Seecttcec}:{ e _'_<_e_

Press the CHANNEL button A or _" to select yol]r

desired channel number or press the number on the

rernote control.

Note _r using the Number button on the remote

controh

•You must precede single=digit channel numbers

with a zero (For example: 02, 03, 04 and so on).

• When selecting cable channels which are higher

than 99, press +i00 first, then press the last two

digits. (Example: m select channel 125, first press

"+100" then press "2" and "5").

Remember: if the TV/VCPdDVD is connected to a

cable box or satellite box, the TV!VCR/DVD lrl_tst

be on CH3 or CH4, then the channel m be viewed

must be selected on the cable box or satellite box.

Press the VOLUME button £ or V

to adjust the volmne.

VOLUME 2O

NOTES:

* If you press the CHANNEL button _ or _'in the

DVD mode, you can change the TV channels

Even if you turn off the TV/VC_/DVD in the

DVD mode, when you turn it on again, it will go

into the TV/VCR mode.

This television has a degaussing circuit that will clear

up color errors on the TV screen thm are caused by

any excess magnetism which happens to get too

close to the TV This circuit is designed to operate

once when the set is first plugged in. It'minor color

errors are seen in some locations on the screen,

please unplug the TV for approximately i5 minutes.

When the TV is plugged back in, the degaussing air=

cult will operate once to clear them up. Repeat this

procedure any time the TV screen is accidentally

magnetized, or when the TV is moved or relocated.

19

The TV!VCR/DVD's picture controls BRIGHT,

( ONTRAST, ( OLOR, TINT and SHARPNESS

are preset to _hctory specifications. Although they are

usually the best, you may need to make some further

adjustments for your individual preference.

NOTES:

* Procedures must be tbllowed within 5 seconds or

the Picture Control mode will be cancelled.

* When setting the Picture Control, the Game mode

will be cancelled.

:gake sure ...

* TV/VCPJDVD power xnust be turned on.

f S>_sa >C_" }x:!7220_a'<<<>/'

Press the PICTURE button on the remote control.

PresstheArro'_xbuttonA or_ untildesiredcontrol

is displayed.

BRIGHT

CONTRAST

COLOR

TINT BRIGHT

ooooooo_ooooooo÷

SHARPNESS

,,,_< t 1!<; I { ) ;Oil{ O!

Press the Al'ro'_ button _ or _ to adjust to yore'

desired level.

Arrow Burton _ A_+rmv Bu_rton

to decrease to increase

BRIGHT brighmess brighmess

to decrease to increase

(ONTRAST contiast colrl-a st

(OLOR to pale to brilliam

TINT to pmple to g_ee_

SHAPNESS to sof_ to clear

® If there is apower failure of any kind, the

TV/VCR/DVD will remember the setting.

EN

1(29

+

T0005UF(pl-3B).QX3 04.4.7 1:44 PM Page 20

You can view specially labeled (co) TV prograrns,

movies, news and pre=recorded tapes with either a

dialogue caption or text display.

CAPTION mode: By choosing the caption mode, you

can watch dramas, rnovies and news while captioning

the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can

watch half screen text information Jr'you want

1-2: You may get these captions or text in*\_rrnation

by selecting either "i" or "2". Caption "2" is used,

usually for a second language if available.

NOTE:

Not all programs are broadcast with closed captions.

Your TV!VCR/DVD is designed to provide error flee

closed captions from high quality antenna, cable and

VCR signals. Conversely. poor quality signals are

likely to result in caption errors or no captions at all.

Common signal conditions which nmy cause captions

elTors are listed below:

* Automobile ignition noise

* Electric motor brush noise

* Weak snowy reception on TV screen

* Multiplex signa! reception displaying picture

ghosts or ailplane flutter.

* Playback of poorly recorded or worn VCR tapes.

NOTE:

If the TV!VCR/DVD displays a

black box on the TV screen, this [

/

means that the TV/VC1UDVD is /

set to the TEXT mode. To clear /

screen, select [C APTI()N! ]. [C AP-i

TION2] or [OFF]. / .............................................................

kIake sure ...

*TV/VCR/DVD's power must be turned on.

TIMER pg{©ORAMM NO

Press the SETUP button on the ............

CHANN£L SET UP

USERS SET tip

remote control. ,,OHP_E__P

t AN SL AG B (,LISF,]

CAPTIOr OFF

Press the Arro'_ button A or T to ....... 0

TItlE SEARCH

point to "CAPTIONZ ...........

....... ;/_ v £<; {.g:} ?{ O} @

Press the ENTER button until your ..........

TIMER PROGRAMM N®

desired caption menu appears. ...........

CHANNEL SET UP

USERS SET UP

V Clip SET UP

([CAPTION1], [CAPTION2] .......... *E_,,_,_

[TEXT1] or [TEXT2]) ...................=_o_

TIME SEARCI _

NDEX SEARCH

<? _::X<""e Ca: ©" f;_: <' " "<O

PresstheSETUP buttonon theremotecontrolto

return to TV mode.

7) <; _{_<;<iL77H! (Z<V;L) 4;_/77{?_

5<? 7_'M

Repeat steps [1] and [2], select [OFF] using the

ENTER button. Press the SETUP button on the

remote control to return to TV mode.

L%<0,_,

The On-ScreenDisplaywilldisappeara£_er5 sec-

onds.

* It wil! also disappear when the MUTE button is

pressed or when the PAUSE button is pressed

while recording.

* If there is a power *Silure of any kind, the

TV!VCR/DVD will retain its memory for this fca=

tklr e.

-20- EN

1(29

4>

T000BUF(pl-35).QX3 04.4.7 1:44 PM Page 21

I,-£ i;' I _! {

Make sure ...

* TV/VCR!DVD is mrned on.

'J Select %/O/tiP S{M " UP

T%VCR SETUp

Press the SETUP button on the .....................

SETTINCSCl OOK

CHANNE SET UP

remote control. °seasseto_

V C_qip SET UP

LANGUAGE /ENGL SH]

Press the Arro'_ button & oi' T to ....... Eo<

ZERO RETURN

select "VoCHIP SET UP'. ...........

INOEXSEA_CH

Then press the ENTER button.

2t_Me_/,'<<e_>_ <;t<le

Use the numbc_"buttons on the/'emote (

[

control to enter the access code. [

[

* For the first time set-up or in the [_:

event the TV/VCR/DVD has lost [

power, enter the default code of "

the manbers: 0000.

Press the Arro'_ button & or V to ............

CHAN_,E CODE

select "TV RATING'.

Then press the ENTER button.

,_ ¢>., i ;, • "g' _ ,=.. ..........

<> ,<, 1 9 I_1-I :al >

Press the Arrow button & or '_ to ,,,_ I,',EW_

select TV ratm_ that you _xish to ,,,,, *,,,EW_

yv PG( )p,*lEW]

block. _ _4_ )_,,,E,_

TV MA{ )IVIE_N

Press the ENTER button to turn it

[BLOCK].

*When you select the rating category and mrn it

[BLOCK], the higher rating will mrn [BLOCK]

automatically. Also, the lo_er rating _ill mm

[VIEW] automatically.

* When you turn "TVoY" to [VIEW], all ratings _ill

turn to [VIEW] autonmtically.

Selection Rating Category Explanations

TVoY Appropriate %r all children

TVoY7 Appropriate IDrchildren seven and older

TVoG General Audience

TVoPG Parental Gnidance suggested.

TV-14 Unsuitable for children under i4

TV-MA Mature audience only

"=+ = ........ " " i :I ]Q !!l©<fI!

Press the SETUP button o2!the remote control to

exit the screen.

When you select the ratings of TVoY7,TVoPG,TVo 14

or TVoMA you will have the option of selecting sub

rating categories.

Press the SETUP button on the

remote control.

Press the Arrow button & or V to

select "V-CHIP SET LIP". Then

press the ENTER button.

?

s,, I ,_\e<e')51; e<)<_e ACOEIS OODE

Use the number buttons on the

remote control to enter the access _7

code. (Default code is 0000.)

TIMER PROGR_,MMING

SETTING OLO_><

CHANNEL SET UP

USERS SET LIp

V CfqP SET UP

LAb*OUAGE _E_GI ISH]

OAPTION [OFF]

ZERO RETURN

TIME SEAROH

J_qDEXSEARO_

_!_ S>/; 1 TV RA'[/,/IIi ,,........

Press the Arro'_xbutton & oi V to .........

MPAA RATING

select "TV RATING". ..........

Then press the ENTER button.

g/! S_/e:> 'g 'Sub-Raft g_

Press the Arro'_xbutton V or & to select the sub-rat-

ing you wish to block. Then, press the ENTER but-

ton twice.

* Whe_ you select [TYLYT]: (

Press the Anow button V or & to t ..... _LOO_

select "FV" (Fantasy Violence). _" r_LOCn

Then press the ENTER button to

select [BLOCK] or [VIEW].

* When you select [TV-PG], [TV- (

14] or [TV-MA]: /7 ..... /_LOO_I

Press the A1TOV_ button _ or & to _ r_LOO_

[BLOCK]

select "D"(Suggestive Dialog), _ _LOO_r=L°°_

"L'(Coarse Language),

"S'(Sexual Situation), or "V'(Violence). Then

press the ENTER button to select [BLOCK] or

[VIEW].

Note: W'hen you .'elect [TVoMA], D does not

appear o2! the TV screen.

* The sub-ratings which set to .... _,=,,,q

[VIEW]

[BLOCK] appears next to the rat- _,,_"_,,< ' v,=,,_

FV pG (DLSV} [ILOCK]

ing catego W in the TV rating _,.....",'_<_°_V_L_V,r_LOCnr_L°°n

menu.

g,., _ ,<, +,,{ {a vv.>*_ {}

Press the SETUP button on the remote control to

enter the setting and exit the screen.

-21 - EN

1(29

+

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 22 (_

;</¢fPf;]"(}<:%7{PFi;O,

Note: To change the rating, the TV must be mined to

a station that is not protected. If the (PROTECTED)

appears on the screen, please change the channel to a

station that is not protected•

1)Follow steps [1] and [2]•

2)Press the Arrow button A or T to select "TV RAT-

ING". Then press the ENTER button• Select a TV

rating to be unblocked by pressing the Arrow but-

ton & or T.

Fhen press the ENTER breton to unblock the rating.

3)Press the SETUP button on the remote control to

exit the screen.

<_: % ,, _ ....... TVn,/CR SETUP

TIMER PROGRAMMIN®

SETTING CLOCK

Press the SET,LIPbutton on the .............

USERS SET UP

V CHP SET UP

remote control• LAN_,O_Oe_,_ ,s_}

CAPT ON rOF_]

ZERO RETURN

Press the Arro'a button A or V to ...........

_HDEX SEARCH

select "V=CHIP SET UP". Then

press the ENTER button.

2@ _/_:{ ;ode ACCESScoda

Use the number buttons on the

remote control to enter the access _,

code.

Press the Arrow button A o1' T 1o .........

I_ MpAA RATING

CHANL, E CODE

point to "MPAA RATING".

Then press the ENTER button.

Press the Arro'a button _ or V to ,, _,_,,_

PG _'IE','_}

point to your desired item. _ ':_ _'_"_

[BLOON

NO W[BLOON

Then press the ENTER button to _Loo,,_

select [BLOCK] or [VIEW].

Selection Rating ( ategory Explanations

G General Audience

PG Parental Guidance suggested•

PG=13 Unsuitable for children under 13

R Restricted; under i7 requires accompa=

nying parent or adult goardian

NCo17 No one under 17 admitted

X Mature audience only

* When you select the rating category and mm it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will mm

[VIEW] automatically.

®When you ttIIT1"G" to[VIEW], all ratings will tmn

to [VIEW] automatically.

-22 o

<,xl se_t{ g

Press the SETUP button on the remote control to

exit the screen.

_" i { % ,{6

6L, {{ F', {OIL

To change access code, %llow the steps.

?

Press the SETUP button on the remote control•

Press the AKow button _ or T to select "VoCHIP

SET "LIP".

Then press the ENTER button.

<

/

Use the nl.lnibul" bottons Oll the rcirtote

control to enter the access code•

The default code is 0000.

k

Tg RATING

Press the Arrow button _ or T to ...........

( HANGE CODE

select "CHANGE CODE"• Then

press the ENTER button.

#_ Ete Newco<e

Use the number buttons to enter

your desired access code in the

NEW CODE space• Then enter the

same code in the CONFIRM

CODE space• V=CHIP SET UP

screen appear on the screen•

* If you enter wrong code, repeat step 4, making

sure you enter the same new code exactly in the

confima code space•

NEW CODE

OONF_Rm CODE

_ Kxt theV,©hp settng _ode

Press the SETUP button on the remote control to

exit the screen.

Note: If yon unplug the power cord or power £itilure

occurs, the access code will be lost and will remm to

defauh (0000). You will then have to your access

code again as necessary.

EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 23 Q_

You can record or listen to a program in MTS stereo.

When you play a VHS tape, or receive a broadcast

on the TViVCRiDVD tuner channel you arc watching,

the stares shown below will appear when you press

the DISPLiVY button on the remote control.

4) E PLAY _ 12:00AM

,HIFt CH 123

• SP COUNT 0:00:00

SAP Second Audio Program, which means your

program, can also be received in a second

language or sometimes a radio station

HIFI High Fidelity which produces high quality

sonnd.

1) When a prograrn is broadcast in stereo, STERE()

appears on the TV screen.

2) When a program is broadcast in second audio,

SAP appears on the TV screen.

3) When a program broadcast both in stereo and sec=

ond audio, STEREO and SAP appear on the TV

screen.

NOTE: Although a program may be broadcast in

both stereo and second audio, you cannot

record in both stereo and second audio at

the same time.

4) While the TV!VCPJDVD is set in HIFI stereo

mode and playback mode. HIFI appears on the

TV screen. While the TV!VCR/DVD is set in

monaural(MONO) mode, HIFI disappears flom

the TV screen.

NOTE: If you play nonoHIFI tapes while the

TV/VCR/DVD is set in HIFI, HIFI will

disappear flom the TV screen and the

TV!VCR/DVD wi!! play automatically in

monaural.

Type of broadcast Display on

the TV screen

°None=

STEREO/SAP

SELE( TION

qnvalido

Hi-Fi audio track(2-chamlel)

L-channel R-chamM

Regular Mono Mono

(monaura! audio)

Stereo broadcast STERE() -invalid=

Bilingual broadcast SAP STEREO*

Stereo & Bilingual

broadcast

SAP*

STEREO*

SAP*

STERE()

SAP

L

Main audio

prog_um

Sub audio

progqam

L

sub audio

program

R

Main audio

program

Sub audio

program

R

sub audio

program

Normal audio

track

Mono

L _R

Main audio

prog_um

Sub audio

prog_am

L+R

s:ubaudio

program

*You must select the recording mode in TV AUDIO [STERE()] or [SAP] uhen you record a broadcast

-23 - EN

1(29

+

T000BUF(pl-3B).QX3 04.4.7 1:44 PM Page 24

Ma_sut_ ...

o TV/VCR/DVDpowermustbe mrned on.

;_??£Yti '/'H/i:?(?D£

Press the SETUP button on the .............

remote control.

Press the Arrow button A or V to

point to "USER'S SET UP". Then

press tile ENTER button.

? S' VCfh 5

_, USERS SETUP

Press the A_Tou button _ or V to ...... _o_

point to"VCR AUDIO". ........... _°_

AUT© NETURN {OIF /

vc_ AUDIO _lg

TVAUD 0 ISlER_01

3 Seec_/IP_ F:/]

Press the ENTER button until

[HIFI] appears. /

RE_TAL fOFF]

REPEAT PLAY [OFF]

AUTO RETURN IOFF]

VCR AUDIO [HIFI] .....

T_ AUDI© [gTE_ O]

,#_To e/_ _oqV _ode

Press the SETUP button on the remote control to

remm to TV mode.

NOTES:

For everyday operation, "HIFP' should be selected

for playback/recording.

* When you play non-HIFI tapes, the TV/VCR/DVD

will play automatically in the monaural mode.

* The TV/VCPdDVD records automatically MTS

broadcasts in HIFI stereo sound unless you select

SAP mode recording before you begin recording.

You can change the selection to "MONO" if you

want to listen to HIFI tapes in normal audio playo

back.

1) Press the SETUP button on the remote control.

Press tile Arrow button _ or T to point to

"USER'S SET UP". Then press the ENTER but-

ton.

2) Press the Arrow button _ or V to point to

"VCR AUDIO".

3) Press the ENTER button until [MONO] appears.

4) Press the SETUP button on the remote control to

return to TV mode.

'_ Seec *UStI_':_ S SZ{7 UP

Press the SETUP button on the _v........

TIMER PF_QGIRAMM N®

remote control. _eTTINGCOOK

CHANNSL SET UP

UseRs SET Up

Pressthe Arrow button _ or _ to _A_UA_Y2_,,_,_

CAPTION [OFF]

point to "USER'S SET -LIP ._,_........._A_o_,

_NDEXSEARC_

2Seec_ ?VAU©O

Press the AKow button _ or _ to

point to"TV AUDIO".

3Seec/STZi:([_iO]/SAP] o_ ilF;/_ONO]

Press the ENTER button until [STERE()], [SAP], or

[MONO] appears.

Press the SETUP button on the remote control to

return to TV mode.

NOTES:

You must select the recording mode,either TV

AUDIO [STEREO] or [SAP] when you record a

broadcast.

Reibr to "MTS RECORDING/MONITOR

MODE".

* If you select second audio when second audio is

not available, the TV/VCR/DVD will record nor-

ma! audio.

* The TV/VCR/DVD records automatically MTS

broadcasts in HIFI stereo sound unless you select

SAP mode recording beibre you begin recording.

-24 -EN

1(29

T0005UF(pl-3S).QX3 04.4.7 1:44 PM Page 25

This TV/VCR/DVD will operate with any cassette that has the _ mark. For best results,

we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

k??E<;4_'77o,<_

* Avoid moisture. Moisttue condensation may oeel]r

on the tape if it is moved _iorn a cold place to a

warrn place or visa versa. Betbrc using a tape with

these conditions, to avoid damage of the tape and

your TV/VCWDVD wait until the tape has

warmed to room temperature and the moisture has

evaporated.

* Avoid extreme heat, high humidity and nmgnetie

fields.

* Do not tamper with the cassette mechanism.

* Do not touch the tape with your ringers.

Insert the cassette in the direction as shown. Push in

gently, but continuously, on the cente>back of the

cassette until it is drawn into the TV!VCR/DVD. The

TV!VCWDVD will automatically turn on.

CORRECT WRONG

7>'0 7;4PE_iP/i'L){:<

Betbre recording, select the rope speed from : SP

mode (Standard Play) or SLP mode (Super Long

Play).

The ruble below shows the nmximum recording/play-

back time using T60, T120 or T160 ropes in each

mode.

Tape Speed Recording/Playback Time

T)pe T60 TI20 TI60

of tape

SP mode 1 hottr 2 hours 2o2/3 hours

SLP mode 3 hottrs 6 hours 8 hours

Note: You can play back a rope recorded in LP mode

(Long Play).

<; *'>:?E777!'

1)IntheStopmode,presstheSTOP/EJECT button

on theTV;VCR/DVD_ The cassettewillejecL

2)Pu!lthecassetteoutofthecassettecompartment

3)Store the cassette in its case as shown.

You can prevent accidental

erasing of recording by

breaking off the mb on the

back edge of the cassette.

If you decide 1orecord on

the rope again, cover the

hole with plastic tape.

Plastic Tape

NOTE:

° In DVD mode, Whether the cassette is with mb or

without tab you insert, it doesn't start playing until

you press the PLA-Ybutton.

In TV,WCR mode, if the cassette without tfff_is

inserted, playback will autonmtieally start.

- 25 - EN

1(29

4>

T0005UF(pl-3B).QX3 04.4.7 1:44 PM Page 25 (_

1_/Iakesure ... Press the PAUSE button, then press the F.FWD _

* TV/VCR/DVD po'_xer must be turned on. button to start the playback in slow motiom The

TViVCRiDVD mutes the sound during slow motion.

Press the PLAY button to return to nomla] playback.

'J _:_<:_ _ }>_:,e;:_<_:le__,::_l)e NOTE: If it is left in the Slow mode lbr more than

If the erase-protection tab has been removed, the five minutes, the TV/VCR/DVD will automatically

TV/VCR/DVD will start playback atuomafically, go into the Stop mode.

Press the PLAY button.

Press the STOP button when play-

back is completed.

NOTES:

* If you press the PLAY button (of the TV!VCR side)

in the DVD mode, you can start the VCR playback.

* If you press the SELECT button dm'ing the VCR

playback, it will stop and the mode will change to

the DVD mode. In addition, the same fl_mction

operates with the DVD side PLAY button or the

OPEN/CLOSE button.

You can view a still picture on the TV screen during

playback (the Still rhode). Press the PAUSE button

during playback. Only tapes recorded in the SLP

mode will show the least amount of lines. Press the

PLAY button to return to playback.

NOTES:

* You can advance the pictul-e one flame at a time by

pressing the PAUSE button during the Still mode.

* If it is left in the Pause mode for more than five

minutes, the TV!VCR/DVD will automatically

switch to the Stop mode.

In the Pause/Still mode only, when the picture begins

to vibrate verticall> stabilize the picture by pressing

the CHANNEL button i or _.

NOTE:

If there are video noise lines on the screem see Tracking

Adiusm_ent section.

*Tracking adjustment will be set automatically

(Digital Tracking function) when you start play=

back.

* However when playing pre-recorded tapes or tapes

recorded on other VCR, noise lines (black and

white streaks) may appear on the playback picture.

If this occurs, you can adjust the tracking control

manually by pressing the CHANNEL button _ or

until the streaks disappear. To remm to the DTR

fi_mction,stop the tape once and start playback

again.

* You can reduce the noise lines by pressing the

CHANNEL button _ or _" in slow mode too.

Tracking adjusm_ent in Slow mode will not be set

automatically.

1261 EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 27

I>I]LI' I !s £ 7 1 , '_: 2! &_;" ;/"

I I,_=,

kJake sm"e ...

* TV/VCR/DVD's po'_xer must be turned on.

* Insert a prerecorded tape.

This ffmction enables you to improve the picture

quality _ahen playing back _om cassettes such as

rented tapes.

The TV/VCR/DVD has the auto repeat function that

allows you to repeat a tape indefinitely without

touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning

to the end of the tape.

BLANK REPEAT: Repeat playback fiom tl_ebegin-

ning to a blank par< which is blank tbr more than

10 seconds.

_ Start playback

Press the PLA-Ybutton to start playback. "RENTAL

PLAY _" appears.

* Once you select tl_e Renta! mode, it stays in e_l}ct

even a*keryou tttrn off the TV!VC_JDVD.

7Y? 7'}M:{_£/} _"_}!; £ "U_O)E

Repeatsteps[1]and [2],select[OFF]usingthe

ENTER button on the remote control. Press the

SETUP button on the remote control to return to TV

mode.

If there is a power Nilure of any kind, the

tv/vcr/dvd will retain its memory %r this feature.

return to the TV mode.

#;_Start playback

Press the PLAY button to start the Repeat Play.

"REPEAT PLAY _" appears.

* Once you select the Repeat Play mode, it stays in

effect even after you turn off the TV/VCR/DVD.

* If"the Rental mode is set [ON], the "RENTAL

PLAY _" display has priority.

7Y?<; ",<7i£TM£EE/*£,;II < P£, }IODE

Repeat steps 11]and [2], select [()IF] using the

ENTER button on the rernote control. PrEss the

SETUP button on the remote control to return to TV

mode.

If there is apower failure of any Mnd, the

TV/VCR/DVD will retain its memory %r this fea-

ture.

-27- EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 28

MaDe sure ...

, TV/VCR/DVD power must be turned on.

* Insert a tape.

This fhnction allows you to search easily a beginning point

dmt you want to review by rewinding or fhst fbm arding.

NOTE:

Zero Return WILL NOT work on a blank tape or a

blank portion of a tape.

'_' 9 <@a apes3 yo_ _ d<<: r_::: po_;

Rewind or [hst %rwm'd the tape to the beginning

point at which you want to review.

Press the C.RESET buuon repeatedly.

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is

completed.

Press the SETUP button on the (- .............

TIMER pROO_MmlNG

relTlote control, s_m_, c_ocx

CHANNEL SET tip

USEmS SET UP

Press the Arrow button _ or _ to ..........

LANOUAOE (ENOL SH]

point to "ZERO RETURN". _o........_o_°_

TImE SEARCH

Then press the ENTER button. ,..........

The counter wil! appear on the TV screen.

The tape wi!l automatically stop when the counter

returns to 0:00:00.

The Time Search ftmc_ion nmkes it possible to quick=

ly advance the tape to your desired position sirnply

by entering the exact amount of playback time you

want to skip.

NOTES:

*Tirne Search can be set up to a maximum of 9

hours 50 minutes (9:50) by i0 minutes at a time.

* This fl_mctionwill not operate in recording mode.

* This Rmction is not operative when a cassette rope

is not inserted in the TV/VCPUDVD.

h, tDe e.va,_n/c, Delow. To watch a program be%re/

after 2 hour 50 minutes fiom the present position, in

either direction.

'S se_t a tape

s 8 8 88 s

£ Seeet 7 _iS/;!I;SEARCH _ode

Pressthe SETUP button on the .........

remote control. TIMERPROGRAqMINGsKTTINI3CI OOX

CHANNK SET UP

USERS SET UP

Press the Arrow button & or _ to ..........

point to "TIME SEARCH". =_o......_._°_

TIME S£AROH

NDE× SEARC_t

Then press the ENTER button.

Press the Arrow button & or _" until( _,,.:>-A....

your desired time appears. / _

iExample: "2:50' stands for 2hours/

50 minutes) [

If you _aish to cancel the Tirne

Search at this point, press the SETUP button on the

remote control.

This featureis veWusefiflin findingor skippingovera par-

ticularscene on a tape.In this mode, the soundwill be muted.

1)You nmy view a video tape at a high speed in

either a forward or reverse direction by pressing

the RFWD _ or REW _l-_ button during playo

back. (in the SP /LP /SLP modes)

NOTE:

*If you press the F.FWD _ or REW _ button

on the front panel in the DVD mode, the VCR for-

ward or reverse will start. Please press the STOP /

EJECT button once to stop it, twice to eject it.

2)Press it again and the TViVCRiDVD wil! now search

in super high speed. (in the LP /SLP modes only)

NOTE:

* Tapes recorded in the SP or LP mode will dis=

play a noise bm on the TV screen and the picture

may revert to Black and White. This is normal.

3)Press the PLAY button to return to nomml speed. °28 o

Be9 ;'[_eSea_e

By pressing the Arrow button _ or _, the

TV/VCR/DVD will rewind or fast forward to the

specified point.

The time counts down as the searching progresses.

When 0:00 is reached, the tape will start playback

automatically.

Press the STOP/EJECT bumm on the TV;VCR/DVD

or the STOP button on the remote control. This will

delete the selected time.

EN

IC29

4>

T0005UF(pl-3B).QX3 04.4.7 1:44 PM Page 29

This feature provides a method of indexing the star>

ing point so that it can be easily returned to in ei@er

fast forward or rewind mode.

* The index mark will be made automatically when

@e RECORD button is pressed. It wil! also be

marked at @e starting point of Timer recording and

OTR.

* The index nmrk will not be recorded if the PAUSE

button is pressed and released during recording.

* The time gap beP,veen making the index marks on

@e tape should be greater than i minute for SP

recording, 2 minutes £)r LP recording and 3 mira

utes £_r SLP recording.

* In some cases, the index mark at the beginning of

video tape cannot be detected.

Example: You are watching program number 4 and

want to fast lbrward to program number 7. You

must skip three programs.

CURRENT PLAYBACK PROGRAM

m

Beginning of tape ! End of tape

.4 3 2 1 1 2 3

INDEX MARK

,;>, [% ,,,, @ ,¢ **

TVVCR SETUP

Press the SETUP button on the .....................

SETTINLv CLOCK

remote control, o_=_useRssErSETupUP

v c;HIP sET up

Press the AKow button A or _' to ........ _......

CAPTION [OFF]

ZERO RETURN

point to "iNDEX SEARCH". Then ............

INDEX SEARCH

press the ENTER button.

9 R_£ !el yo_l! d!);ii-e J 11@I_ ){!_

Press the Arrow button A o1'_" matil[ '=°=i2.....

the number of programs that you [

want to skip appears. /

(Example: _'03 ' for 3 prom'ams) /

* The Index Search mode will be (

canceled if the procedures are not activated in 30

seconds.

3 _i!;egi /alex Seach

Press the AiTow button _ or _. The TV!VCR/DVD

begins rewinding or fast lbrwarding to the beginning

of desired program.

NOTE: Eveu time an index signal is skipped, the

nmnber in the progqaln indicator decreases by one.

When the preset program is reached, the

TV/VCPJDVD will start playback automatically.

* A video cassette must be inserted in the

TV!VCR!DVD £_r this hmction to work.

* The number of Index Searches can be set up to 20.

* This function will not operate in the recording mode.

* When you want to cancel @e Index Search while

in progress, press the STOP button.

<g}l]W I !_ I I:? "i_, I I>}129;<

This shows the elapsed recording or playback time in

hours, minutes, and seconds. (The displayed time will

not change on a blank rope or blank portions on the

tape.)The .... indication will appear when the rope has

rewound further than "0:00:00" on the tape counter.

* When the end of a tape is reached daring record=

ing, playback, or fas>lbrward, the rope will auto=

matically rewind to the beginning. After rewinding

finishes, the TV/VCR/DVD will eject the rope and

mm itself to off

* This ftmction is operative when Repeat Play is set

to the [OFF] position.

* The tape will not aura-rewind during timer record=

ing or One Touch Recording.

- 29 - EN

1(29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 30

Make sure ...

*TV/VCWDVD power must be turned on.

* Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the rope to

the point at which you want to begin recording0

NOTES:

* This TV/VCR/DVD will ONLY record and view the same channel

* This TV/VCR/DVD calmot record the contents fi'om the bull>in DVD.

You can ONLY _xatch the same TV progqam that is

being recorde&

'_ Seect t e c a e to be*eeo<e(_

Press the mm_ber buttons on _he cH_0

remote control or the CHANNEL

button A or V.

Remember: If the TV/VCR/DVD

is connected to a cable box or satel=

lite box, the TV/VCtUDVD must be

on CH3 or CH4, then the channel to be recorded

must be selected on the cable box or satellite box.

_,3 _ ;sb@<x ....

Press the SPEED button to select

the desired tape speed (SP! SLP).

sp

,£ REC

Press the RECORD button.

sp

,g S_< ecod q

Press the STOP button when recording is completed.

Press the PAUSE button to tern= (.....

porarily stop recording. /

Press the PAUSE or RECORD but-

ton to resume recording.

NOTES: _

* After rive minutes, the

TV/VCPJDVD will automatically switch to the

Recording mode to prevent tape damage.

* If"CLOSED CAPTION (ON)" is selected, the Ono

Screen Display will appear for 5 seconds, then dis=

appear.

1301 EN

1(29

4>

T000BUF(pl-3S).QX3 04.4.7 1:44 PM Page 31

This h_mctionenables you to set a recording length

simply by pressing the REC!()TR button on tile

TV/VCWDVD.

kIake sure ...

* TV/VCWDVD power must be turned on.

* insert a cassette tape with its erase prevention tab in

place, (If necessary, rewind or fast forward the tape

to the point at which you want to begin recording.)

NOTES:

* You cannot start OTR with the remote control.

*Recording starts immediately when the REC/OTR

button is pressed.

* When the RECiOTR button is pressed 18 times, the

TV VCR DVD retmns to the Normal Recording mode.

* To stop the OTR operation, press the STOP button

on the TV!VCWDVD or on the remote control.

*To show the remaining time, press tile DISPLAY

button on the remote control so that "OTR"

appears on tile TV screen. (It will show up

momentarily then disappear0

*Recording stops when 0:00 is reached.

* Please note that in the SLP lnode maxinmm record-

ing time, assuming the tape is started at the begin-

ning, is 8 hmlrs using T-160 (or 6 hours using T-120).

* If the rope rims out be['ore the end time, the

TV/VCWDVD will switch to tile Stop mode

immediatel> qiects tile rope and mills itself off

* It'you press the POWER button during OTR, the

TV/VCWDVD continues recording until tile select-

ed length is reached.

S {:<t e o ;;,e ....... ,_ <_

Press the number buttons on the remote control or

the CHANNEL button A or T.

Remember: If the TV/VCWDVD is connected m a

cable box or satellite box, the TV/VCWDVD must

be on CH3 or CH4, then the channel to be recorded

is selected on the cable box or satellite box.

2 ? ,.

7>< : [ / < <_l _:! < ) .... ,,

Press the SPEED button to select tile desilvd tape

speed (SP/SLP).

Press the RECiOTR button on the I o,_<,_0,

TViVCRiDVD as many times as

nee&& The recording length ;_ill be

determined by the number of times

yot_press the RECiOTR button. Each _

additional push wi!l increase the

recording time by 30 minutes. It is set up to 8 hours.

Push@s) Display Recording length

1 push nomml recording)

2 pushes 0:30 30 minutes

3 pushes 1:00 60 minutes

17 pushes 8:00 480 minutes

You can make copies of video tapes made by friends

or relatives for your el_joymenL

You can not copy a DVD to a videotape.

WARN_NG: Unauthorized recordings of

copyrighted v{deo tapes may be an

infringement of copyright laws.

Connect yore TV/VCWDVD and a Sol.trce (Playing)

VCR using the following diagraln.

[Fig.8]

_ [Ex: Source (playing)

IT _1.(]- VCR or camcorder]

Audio/Video \\ "__

adapter cable_ _<_m_ _ I

(not supphed)

1)Insert a prc=recorded video cassette into the Source

(Playing) VCR or camcorden

2)Insert a blank video cassette, or one you want to

record over, into the TV!VCR/DVD's cassette

compartment.

3)Press the SPEED button on remote control _br the

TV!VCR/DVD to select tile desired recording

speed (SP/SLP).

4)Press the CHANNEL button A or _ on the

TV!VCR/DVD until "AUX" appears on the screen.

5)Dess the RECORD button on the TV!VCR/DVD.

6)Begin playback of the rope in the source (Playing)

VCR or camcorder.

NOTE: For best results during copying, use the

TV!VCR/DVD's _hmt panel controls whenever pos-

sible. The _vrnote control might afi}ct the somce

(Playing) VCR's playback operation.

7)To stop copying, press the STOP/EJECT button on

the TV/VCWDVD, then stop the rope on the

source VCR or camcorder.

-31 - EN

1(29

4>

T0005UF(pl-3B).QX3 04.4.7 1:44 PM Page 32 (_

You may set the TV/VCWDVD to start and end a

recording while you are away. You can set 8 pro=

grams to record on specific days, daily or weeldy

within a 1 year period.

In the example/Seh)w, fl_etinter is/Sein£ set to record.

DATE: July 4th, 2004

SETTING TIME: liom 7:30PM to 8:50PM

CHANNEL: CH6I

TAPE SPEED: SP

1_ake sure ...

, if a cable box or sate!lite box is connected with the

TViVCRiDVD you will be limited to record only one

channel, and the channel selector on the

TViVCRiDVD must be selected to the output channel

of the boxes CH 3 or CH 4 and then the actual chan-

nel to be recorded must be selected on the boxes

* Clock must be set to the correct time and date

before setting the timer.

* TViVCRiDVD power must be turn on to program it.

* Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast l\_rward the

tape to the point at which you want to begin

recording.)

* The channel you want m record is properly set in

advance. (See page i8J

Avoid over lop of programs ...

There is a chance that a program will not be record=

ed, when programs overlap;

* The program with an earlier smia has priority.

* Once the earliest program finishes, the overlapping

programs will begin recording in sequence.

* The illustration below demonstrates the sequence

of recordings.

Program i 10:00AM - II:00AM

Program 2 9:00AM - 10:00AM

Program 3 9:30AM - 12:00PM

Recording Saquonce

Program I {

10:OOAM-I'I:OOAM {

Program 2 i

9:O0AM-I 0:0OAM

Program 3

g:30AM-I 2:00PM {

9:00AM 10:00AM 11:00AM 12:00PM

_Recording period is SHADED

'_ Seect "_ _4ER F_ROGRA/_/_i! _",iG'

Press the SETUP button on the _v........

TIMER PROGRA qMING

remote control. _e_,N_o,oc_

CHANNE SET Up

USERS SET Up

Confil_r_ "TIMER PROGRAM- v.........

LANL, UAGE {ENOL]SH]

CAPT ON [OF 1

MING" is pointed by pressing the _,M_.........._o_

Arro'_xbutton A then press the ...........

ENTER button.

* If you have not yet set the clock, "MANUAL

CLOCK SET" appears. If so, lhllow steps [3] to

[8] on pages 15_ 17. Then set the timer recording.

//_ Sett e _: _a_'s e _ ! be

Press the A1Tow button & or T until( ......................"]

the desired channel number /°_'_ '_ /

appears. (Example: CH6I) Iji[ [iiiiii iii iii iiI

Then press the Arrow btttton _. iii iii iii : iiJ

Remember: If the TVFVCR/DVD

is connected to a cable box or satellite box, the

TV/VCR/DVD must be on CH3 or CH4, then the

channel to be recoNed is selected on the cable box or

satellite box.

,_}i Se ec:t o_sce @veiy day o_" weeky _ecod 9

For once recording :

Press the Arrow button & (t_p)

until the desired date appears.

(Example: "7/04" %r July 4th).

Then press the Arrow button _.

TI_,IER PROGRAIqM_NG

O_! DA_ BEGIN END

ii ii 'i'iiiiii!ii ii

For eveo_ &O' recording : To record aTVprogram

at the same time on the same channel eveO' dco'.

(]_3:amp{e. _//onda 3' tkron£k _qltnffa)') ........................ "

PresstheA rowbuttonv (do,,n) t

until "EVRY DAY" appears. .; E;a_;ii:x: x: x

Then press the Arrov_ button _-. ii i[!ii ill

For weekly recording : _record aTVprogram at

the same time on the same ehatme/ eve O' week.

(Fxamp/e. eve O' Mond<v)

Press the Arrow button V (down)

nmil "EVRY" and your desired

day of the week appear together.

Then press the Alrow button _.

-32- EN

1(29

+

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 33 (_

_5 Setbe{_ _s _9_ou_

_F'Se e_d hour'

f} Set e_d ';_nu{e

Pressthe Arrow button & or

until the desired minute appears.

(Example: "50" %r 8:50PM)

Then press the A1Towbutton _.

_ Sett etapespeed

Press the Arrow button & or V

until the desired tape speed

appears. (Example: SP)

'SO ¢::> s_, sett f_g the ptog_s r,

Press the ENTER or RETURN button. The program

is now completed.

* To set another program, repeat steps [2] to [10].

* Press the SETUP button on the remole conlrol to

return to original mode.

'f'J Sett etme

Press the POWER button to set aulomatic timer

recording. The RECORDING indicator lights up.

® You nlt._st turn off the TV/VCPJDVD to activate

automatic timer recording.

If power is not turned off and you continue watch°

ing TM "TIMER REC STANDBY" starts flashing

on the TV screen 2 minutes before the programmed

start time.

To shift the time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [1] on page 32.

3)Press the RECORD button and select the desired

program using the A_Tow button & or T.

4)Press the RECORD button again.

Each additional push will shift fOlward the

begin!end time for recording by 10 minutes. When

the recording is already in progress, each additional

push wil! shift tbrward the end time only. If you

want to cancel while setting, press the PAUSE but=

ton on the rernote control. The recording time

rcmms to the origina! time.

NOTE: When you shi[i forward the time schedule

during recording, the recording speed will automati=

cally be set to the SLP mode.

5)Press the ENTER or RETURN button to exit the

setting menu. Then press the SETUP button on the

remote control to return to original mode.

70 {?£££41';f, B/? 76 £,,_57

* While setting a program; press the Arrow btttton

to go back one step and enter the con'ect hum=

hers using the A1Tow button & or _.

* At}er setting a p_grarn;

1)Press the POWER button.

2)Repea steps [1] o [2] on page 32.

3)Press the A1Towbutton _ (or press the A1Tow

button _ to go back one step) until the part you

want to correct begins flashing, then make the

changes pressing the A1Tow button & or _.

4)Press the POWER button to set automatic timer

recording.

7© _f_Nd££ ,,t,o,,, 7<?}2} 77(' }!?W/!A

££< X,_££>f%6

®AJ_:er setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 32 and select a

program you want to cancel.

3)Press the CRESET button.

4)Press the SETUP button on the remote control to

return to TV mode.

* WMJe recording is in progress;

l)Dess the POWER button.

2)Dess the STOP!EJECT button on the

TV/VCPJDVD.

133 o EN

1(29

4>

T0005UF(pl-BB).QX3 04.4.7 1:44 PM Page 34 (_

7_? (77/£<¸¸% 77ZF _E_7_<iL_/') 77DS_

l)Press the POWER button so that the Recording

indicator goes off

2)Press the SETUP button on the remote control.

3)Confim3 "TIMER PROGRAMM]NG" is pointed.

4)Press the ENTER button. The demils of programs

appear on the TV screen.

5)Less the SETUP button on the remote control to

remm to TV mode.

* Make sure the channel you want to record is prop°

erly set in advance.

* It is not necessary to press the RECORD button lbr

timer recording.

*Recording begins automatically at the Start time.

* The display will not be turned on when the pro=

gqammed recording begins. To watch the currently

recorded TV program or to play a DVD disc, press

the POWER button to mm on the display and use

the SELECT button to choose the TV/VCR mode

or the DVD mode.

* The erase=prevention tab on the cassette must be in

place (or you nntst put tape over the hole).

* Kthe eraseoprevemion tab is removed, the cassette wil!

be ejected when the POWER button is pressed to off.

* If the tape runs out before the end time, the

TV!VCR/DVD will switch to the Stop mode

immediately and the rope wil! be ejected.

With this [}ature, after timer recording is finished,

the beginning of the recorded program(s) can be

searched for automatically.

'_ S_::<_cb:iiti_i::?9 _;Ki t;P •...........

Press the SETUP button on the ......................_,_, o_oo_

CHANNE SET LIp

remote control, o_e_s.*erup

v c_lp SET UP

LANGUAGE {ENGL SH]

CAPTION [OFF]

Pressthe Arro'a button _ or _ to ..........

TIME SEARCH

point to "USER'S SET UP". ...........

Then press the ENTER button.

_3_, /,+Ls,, _+,,,, ,, ¢ %, USER S _IETUP

Press the A1Tox5 button t o1"I to

point to "AUTO RETURN". ...... _o_REPEAT PLAY [O

,_ U•O RETLJRN ON ....

vc_ AUDIO fHF

Press the ENTER button until [ON] ........ i......

appears.

3 A_i/oReur w7 ieg _

When all the timer recordings are completed, the

TV/VCR/DVD will rewind to the beginning of the

recorded progqam(s).

NOTE:

* If you press the POWER button while tape is

rewinding, the Auto Remm will stop.

,4 W_ch _÷ ecodedpoga_

Press the PLAY button.

70 U; "+_<7'/{; 7/1£ ,_7_? £/! 72?? _

Repeat steps [1] and [2], select [OFF] using the

ENTER buuon.

If there is a pm_er failure of ally kind, the

TV/V( R/DVD will retain its memolw t_r this Da-

ture.

The Sleep Timer fi_mctionturns off the

TV/VCPUDVD without using the POWER button

after a desired period of time.

NOTE:

* This function does not operate during Recording

mode.

'_ Se cot SLKEf:,'l°/VGiR

Press the SLEEP button on the remote control until

"SLEEP TIMER" appears.

2 Set seept >e

Press the SLEEP button until your

desired sleep time appears.

Each additiona! push wil! increase

the time by 30 minutes up to 120 SEEK _ 120 MIN[3TKS

minutes.

A_ier 5 seconds, exit the Sleep Timer setting.

Press the SLEEP button on the renlote control until

"SLEEP TIMER" appears. Press the SLEEP button

until "SLEEP 0 MINUTES" appears.

=34= EN

IC29

4>

T0005UF(pl-35).QX3 04.4.7 1:44 PM Page 35 (_

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote

control. Each time you press the DISPLAY button on the remote control, the IV screen _ill change as folloa s:

* Counter mode: After 5 seconds, only the counter

remains. To clear it, press the DISPLAY button.

* Clock mode: After 5 seconds, only the clock and

the channel number remain. To clear them, press

the DISPL/VY button.

*The On Screen Display disappear after 5 seconds.

* This is true even if the MUTE button is pressed or

tl3e PAUSE button is pressed while recording

OFF mode Counter mode Clock mode

i i s_ COUNT 0_12_34

...................................i!ii=e,5secon,si+ =er .coods!

.........................................................Jli i !i i

i i _i iii i i _i

COUIT 1_234 r i

; \ _ i kj ;

Counter Clock S Channel

remains remains

OFF mode Clock/Counter mode

STOP 54O PM

OH2

COUNT 012:$4

g<'<]!_1'>l& "°_I & _%ri%rI;<I I',> ": IS''F,_<I '" "',_r(,,............... .I ( ( .....

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letteronumber combinations. Please check with your local cable colnpany. The IDllowing is a

chart of common cable channel designations.

CATVchannel 5A 2 3 4 5 6 7 8 9 10 1! 12 13 A B

TVDisplay 1 2 3 4 5 6 7 8 9 10 1! 12 13 14 15

CATVchannel C D E F G H I J K L M N O P Q

TVDisplay 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

CATVchannel R S T U V W W+I W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

TVDisplay 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

CATVchannel W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

TVDisplay 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

CATVchannel W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

TVDisplay 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

CATVchannel W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

TVDisplay 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

CATVchannel W+55 W+56 W+57 W+58 A-5 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

TVDisptay 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

CATVchannel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

TVDisplay 106 107 108 109 110 111 112 113 114 115 1!6 1!7 1!8 1!9 120

CATVchannel W+80 W+81 W+82 W+83 W+84

TVDisplay 121 122 123 124 125

- 35 - EN

1(29

+

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 36

The %!lmxing discs can be played back on this

TV/VCR/DVD_

® DVD video ® DVD-R/RW*

o DVD+R/RW* o Audio CD

® CD-R/RW*

* Depending on the types or the writing method of the

medium some discs can not be played_

o Some DVD-R/RW, DVD+RiRW, or CD-R/RW discs

made on personal computers or on DVD recorders may

not be played back properly due to the fi_ctors such as

scratches, dirt or special properties of the disc.

* Discs made on personal computers may not be played

back properly due to the different enviromnent or the

settings of the application you use. We recommend

always to use the standardized, rightly formatted discs.

(Please contact the sales agency for more detai!).

This TV/VCR/DVD con%rms to the NTSC color system.

You cannot play discs recorded in other color systems

such as PAL or SECAM

o Some discs include region codes as shown belmv.

o The number inside the symbol refbrs to a region of the

world, and a disc encoded in a specific region format

can only be played back on TV/VCR/DVD with the

same region code.

The follow,lug discs cannot be played back on this

TV/VCR/DVD.

®DVD with region codes other than i or ALL.

®DVDoROM

®DVDoRAM {Never play back, otherwise ma[funco

tion may resumt)

®CDoROM

®VSD

®CDV (Only Nays back the audio part.)

®CD-G {Only plays back the sound.)

o CDq {Never Nay back, otherwise maffunction

may result.)

®SACD

®Photo CD {Never play back, otherwise maffunco

tion may result}

oVideo CD {Never play back, otherwise maffunco

tion may result.)

oMP3

AtO' ofl:_e_"c/isc._ u,iK_oHtcompatibi/iO _indications.

[DVD]

Data on a DVD is divided into sections called "titles" and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs and these playback con_

ditions take priority over user operations on this

TV/VCR/DVD lfa function you selected does not run as

desired, refer to the manual accompanying the disc.

Example

Title 1 _1. Title 2

[AUDIO (D]

Data on an audio CD is divided into sections called

"tracks", each of which is given a track number_

36 EN

01All

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 37

• Tt.t111on the power of amplifier and any other coin=

ponents, if necessary.

P'es:;<t ePOW{£A b<t_o>

• The power will mm on.

2 Pes_!t_eOPENcgosEb otoope! < s<

o_:_5 _gtay

3 P:_cetbecbose_dsc t et}} 9 wt_t_e

4 P'ess the PLAY but{o_

The tray wil! close automatically and playback will

then start t_on] the first chapter or track of the disc.

If the playback does not start antomaticall> press

the PL/gY buttom

When you playback a DVD which features a title

menu, it may appear on the screen. In this case, refer

to _TITLE MENU".

_s _} st,/ S4SF ;_ '

DVD may contain menus to navigate the disc and

access special features. Dess the appropriate number

bumms or use the Arrow button (A/_/_ll!_) to high-

light your selection in the DVD main menu and press

the ENTER button to confim_.

NOTES

Select DVD mode by pressing the SELECT bumm on

the remote control. Then operate the DVD functions.

Unless stated, all operations described are based on

remote conm)l use. Some operations can be carried

out using the rnenu bar on the TV screen.

[/:_tess rise DS© f'?/£NU b_ tto _

The DVD main nlenu will appear.

2/>! fea>_e s/<£_va _be @ symBo

u_sy _ppea oh th:_ TV <;c_ee/_

s 8 s s s: 8

3fdst/_'ettu sara ab<_on sedst audo

{_sa_d< su{_t ®optoss, ti'ap%,s%, _;_t e

w_dothe_oplo_ssw appet_ ft se÷oton

8 S a S S

6tiess eA_iow butos {aP@i</_*" to see¢_

as ter_sa/dt eENTER b_ _os ocoff _s

seSecos

NOTES

When the DVD rnode has been switched to the

7W/VCR mode, the DVD mode shuts down first and

then TV picture and sound appears in about 4 seconds.

Similarly, when the POWER button is pressed to mm

offin the DVD mode, this mode shuts down first a_d

then the TV/VCP,!DVD's power" is turned of£

A "prohibited icon" may appear at (

the top-right on the TV screen dur=

ing operation, warning that a pro=[

hibited operation has been encoun=

tered by the DVD or the disc. k

With DVDs that use titles for playback program sig=

nals, playback may start from the second title, or it

may skip these titles.

During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st

layer switches to the 2nd layer This is not a real=

function.

Press theSTLE butt<n

The title menu will appear

<

2/ _e feahs/e _ _<>av,:_:{abe, @ sy!>_o

may appea _o_" the 'YV sc een,

s s s <

{} [;hesst_eA owbut{:os(A/_'/q/>}, oseeet

ah {era a_sd/:_eKk}TKR b_:_ostoco _m

9eeet os

<}£LkZ>_<, <LP4Mi:}£_ _ Y(£EEN

®Press the DISC MENU button to callup 6e DVD menu.

®Press the TITLE button to call up the title menu.

NOTE

®Contents of rnenus and corresponding menu opera=

tions may vary between discs. Refer to the manual

accompanying the disc for details.

37 EN

01All

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 38

/,}<i [ ap _{ >f_,,s,m [)t %}

• Playback sill pause and sound sill Re mute&

u, .... {_s

20<0 ' F_< }a}/ _S B. };,gef:s s@ _ s,,,,n£ >@k" ,

©<_ gpayback p_essas< _od_heFFW©

_ o REV '_4< btto fo_' s f_::W SeCO/'_dS

" _1_ 1_ or "_1_1 1_ appears on @e scrcen_

_, s s 888

£ 7oseee asotse s_ee({/epea sepS u t

you_ equ_edspeedasDes_so tLese_eel

For DVDs, fast 5rward/reverse search speed is dis

fcrem depending on @e disc. Approximate speed is

1(x2), 2(x8), 3(x50) and 4(x100).

For audio CDs, approximate speed is x16.

When you use buttons on the TV/VC_/DVD liont

panel, use the SKIP _l/ SEARCH m_ or

SKIP _/SEARCH _-_ button.

<

PLAY b< io_ _,

©u_ _i_ is, a < _'e< _ ;LePAUS};I_[ ic ........ P,a{,S(i

Playback will pause and sound will Re muted. ....................................................................................................................................

2{t),g;;,g;,_ }'O< <;, FI':%]Sq.')N*">' )" S<\/,... _:#4,-4..

b{>o fo<afewseco ds

"J_ i" o1';; _ i" appears on the screen.

3'R_se_:_c ";:p_:ed eisea{ s{ep2

you _eqs edspeed_@:_es_so_ _ ese_ee

Slow forward or reverse speed varies with tile disc.

Approximate speed is i(1/i6), 2(i/8) and 3(!/2).

When you use bumms on the TV/VCR/DVD liont

panel, use the SKIP _1/ SEARCH _ or

SKIP _/SEARCH _ button.

T} O{ > _X}}..... } .......

PL/W b<to_

38 EN

01All

T000BUF(P36-51).QX3 04.4.7 1:25 PM Page 39

There are three ways to begin playback on an Audio

CD at a specific track

Using the ?@mber bltttons on the remoW eomrol

• Playback will start a_ tl_e selected track.

• For single digit tracks (1-9), press a single number

(eg. track 3, press 3).

oTo play track 26, press dO, 2, 6.

U_ing the SEARCH I_IODE button

P_:'ss _u, !i;_:A£¢}, {,'4ODE

• The track search display @pears.

2W/_}s SO<;_co_;ds ":e_c: a d_:_sr_:__aek

I<s_be_us _9R e _,_otso} "e

[eIYo_iecol [o

For single digits press 0 first.

Playback will start at tl_e selected track.

Using the SKIP b_,_ _'1 buttons

During playback, press the SKIP _'I_I button to move

the next track. Press it repeatedly to skip subsequent

tracks. Press the SKIP Nt_ button to go back to begin=

ning of the cmrent track. Press it repeatedly to go to

the previous tracks.

If the SKIP button is pressed while the playback is

paused, the playback will be paused again alier skip=

ping to the next track.

NOTE

The SKIP _ _j buttons are not available when

playback is stopped.

P;ess te SI3AI;(Ch IRe©I-i!} b</o o_ce fo

IIueO ai:Ie<sesc_ wicefo T/:e

ses_cD d<_ sg p!aybaek 2

................ IT_L e[ g :

lh<,I;,k_l>be_b_aloe's, o It÷: _:_]oi_:_cosl'ol,

Playback will start at tl_e selected Ch@ter or Track.

Press lie CLEAR button to erase the incorrect input.

For single digits press 0 first.

_ne <s g'!heNu{sbe b<_{_:o_ssosIDe

ie_soeco_ /o

Playback will start at the specil]ed time,

Press the CLEAR button to erase the incorrect input

_]_.en there is !o need to enter a lumber> _'0>_

@pears amomatically. For example, " 0 : 0 "

appears in the Time Search display if the total time

of the disc is less lmn i0 minutes.

Use nmrkers to memorise your favorite places on a

disc.

I; _,*<I IOU[ filliP!;

("+=71 ..... ;_'+ I ,*; , > -> >

<_I., Ill /D: 11 I ?i {I{_IIIl.{ L_III_{{3I;,CI=

The display screen and Markers will @pear on the

TV screen.

" 4 5 C 7 ,g 9 (,; a ? <f_5 _,_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iii i {iii{iiiiiii iiiii iiiiii[ is iiiiiiii iiiiiiiiiiiiiii[ i11iiii 1ii{iiiiilliiiiii( i11iiiii i i ]iiiiiiiii is ii{iii is iiiiilliiiiiiii i i i iiiilliiiiiiiiiiiiiiiiiiiii iiiiiiiiii{iiii iiiiiiiii iiiiiiiiiiii[ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiii

I1/i_1=_1"1 b,=a _/ '==' _; "I "1 <l(_iiIe<l {}(Dill I.) ........ Ill(,i ..... I .............

l=h w=¢. _,

<; _;,,1ISl{ <)II

The Title or Track and el@sed playing time _111

appear in the TV screen.

(> #":;_ }_/'_' e is ;q ;. >> } 9

S/,}_IAf;?O 1, e'er.,=- .# . ¢" ,<.._;1_,,_,,12 o1[ iiI=l]!? :, ,,I) ,<I .....

1131"I ,61/1-.} In "1")_= 1_' ;>I:;"" ;;f.( = = _: 4<'=

II_ I,...>.>y":" :' t,,,=:=IblT°£II19<;11<.

NOTES

Opening the disc tray or tmning off the power or

selecting AC at step 2 and pressing the ENTER but-

ton will erase al! Markers.

To clear a rnarker, using the Arrow button (_l!l_),

position the cursor on to the nmrker number to be

cleared and press the CLEAR button.

You can mark up to !0 points.

<g_ _;> /2 g 17, ro <'/%g "........ :_,>c_,_,, ....... }<¢C_{ b> /,

_) };g

39 EN

01All

+

T0005UF(P36-BI).QX3 04.4.7 1:25 PM Page 40

.........................< I

REPEAT is available only during playback

F?U_)2_:I7 7W7](,U / CIY/_B+I2!_R

®The repeat mode changes as described below every

time you press the button•

NOTES

• Repea Title/Chapter is not available with some

scenes•

• The REPEAT setting will be cleared when moving

to other title or chapter.

F?Zi):f:_)2_;_T"TF_'A0¢4

7o activa/e the epeat fu_ctio h p<ess the

[@{{PB/AF burro _ du<i_:g pIayb;isek

The repeat mode changes as described below every

time you pressthe button.

You may detemaine the order in v, hich tracks xxill play.

NOTES

Repeat setting will be cleared when moving to other

track

Repeat playback does not ihnc_km dmi_g repeat A-B

playback.

I:?E B EX Y A d7

Press i:?{71Pff£7 A-Bb _oa_ y<ut¢ o,,

se s_st 9}':_o_st

[] A- appears briefly on the TV screen•

_J_ Peast;e /:_!KP}I{,/_i}A,B b tea aga _atyaa_

chose e_sd po f

[] A-B appears briefly on the TV screen and the

repeat sequence begins.

_J7 To exi{ e se<7_ e! ce p_e{<s _De <EIEi_,,'_ A,

NOTES

The repeaA-B section can only be set wilain tlaeCtll'-

rent title (for DVDs) or cmrent track (_hr audio CDs).

RepeatA-B is not available with some scenes in DVD.

To cancel the A point which was set, press tl_e

CLEAR button.

Repeat A-B playback does not ffmction during title,

chapter, track or all repeat playback.

4O

Istop _rode piess the Si,_OD££5_tto_

®The PROGRAM screen will appear.

2> P_'e<s/eA_,;,> b_ o>,/s.o _ io<;e<,<; ;_

tuck, _en Ire'/; _h<.

K_'/TEB bc_ttos

Pressthe CLEAR buttonto

erase the most recently entered

prog_am.

/7 £epea ':_¢ep 2 _/ y_,_ _we see<_;ed M{ t_+,

,_sc<syou,lv;_ I.opay t_epogs

dPeas sePLAi'< b_/to top£ayt ep_o-

J_ack<.

NOTES

While the program is being played back, the STOP

works as _hllows.

Press the STOP buUon once and l_en the PLAY but-

ton again, playback will restart from the point where

the STOP bumm was pressed. (Program continued)

Press the STOP button twice and then tlaePLAY butlon

again, playback will restart _i'omthe track in the usual

way (Program cleared)

Up m 99 programs can be entered.

To erase all programs at once, select ALL CLEAR at

tlae bouom of the list at Step2.

If you like to repeat tl_ecurrent track in the program,

press the REPEAT button repeatedly until []

TRACK appears during playback• If you like to

repeat the entire E£ogram press the REPEAT button

repeatedly until [_J ALL appears during playback.

This shuffles the playing order of tracks instead of

playback in the sequence.

...... ; <..,_.;; )_;'H""JW< .

. + .......

RANDOM screen appears.

2P _::ssthe PLAt' to s_a_ andom _:Aq/baek

NOTE

If you like to repeat the current track in the raadonl

selection, press the REPEAT button repeatedly until

[] TRACK appears during playback. If you like to

repeat the entire random selection press the

REPEAT button repeatedly until [] ALL appears

during playback.

EN

01All

TOOOBUF(P36-51).QX3 04.4.7 1:25 PM Page 41

#'_t _ _/_%i _ _ q_X_ _v<,_.-._._-___ _ _ _{_.........

( S{ ..................

The TV/VCR/DVD allows you to select a language %r

subtitles during DVD disc (if available) playback.

<

Pens PegUBT'F{,Eb{ _o/_ {£ _{/P_uYb_!<{'_

8

see:i ?c,_ des ed sub_ e s2sg_sge

• The subtitle language will appear on tlae display bar

at the top of the TV screen.

$To{, /" of s>bi_bs pte<s },eSUBTTLE

bu_o _epe_:_tedys_ OFF a::_pe_:_'s

NOTES

®Some discs allow audio language setting/subtitle language

setting on the disc menu. (Operation varies between discs,

so refer to the marmal accompawing the disc)

• If the desired language is not shown after pressing

the SUBTITLE button several time< the disc does

not have subtitles in that language.

• If you choose a Language tl_athas a 3 letter language

cod< the code will be displayed eve Utime you

change the Subtitle langtmge setting. If you choose

any other lanMmges, 'ooo' will be displayed instead.

(Refer to page 43.)

The TV/VCR/DVD allows you to select a language

during DVD disc (if multi languages are available)

playback.

<

P_ess!_eAUOO}m{ohdu_0_,k_ybm_t;

{ {< { { ({

_{ }:_.....e:,s{e AOOO _'>' :, :_},:{ x]see<s[

yo{ des_ed a 9/;ege

NOTE

Pressing the AUD][O bumm may not work on some

DVDs with rnuhiple audio languages (e.g. DVDs

which allow audio language setting on tl_edisc menu).

Some DVD discs contain scenes which have been shot

simuhaneously fi-om various angles. You canchange

tlae camera angle when the (_) icon appears on the

screen.

The selectedanglewillbe displayedon thedisplay

bar at the top of the screen.

2 Pe_;>o he ANG_}}I b,t_o< _eDeae_yio

se(:c you{ desied ssge_

Adjust the Black Level Settings to make the black

parts of the picture brighter.

a

Fhess _be f401/,)_!il/:n_tm_ p ,:_yb,_c/,,,

;:;:..................................../)}

2 Pr<:ss h<,/£HT[£A b_ <_? oswt_?O_:F;

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

< < <

3!:hess_h< _400K}> o_ wceo_"

_<{EK'UPA;b;/o _oex/

NOTE

The setting will be saved even if the TV!VCR!DVD

is turned off

You can enjoy surroun&sound ef_bct over two speak=

era on this TV/VCtUDVD.

b [toB!_ce{©©;o/_ee} <u_ g}sayb_}ck

Psess!}eAU©Obuto} _elseaedyd_< sg

_o;_yb:¢ei<toseen be,/_eeST[]}i£_{O[,,,0/,4

otR,C}4

STEREO - both right and left channels are antise (stereo)

L=CH o only left channel is active

R=CH o only right cbmnel is active

NOTE

If the Virtual Surround setting is ON, the sound mode

will be fixed to STERE() and can not be changed.

41

_f_'') > 2 _" as........ e_<,.....,o (FF

NOTE (for(D playonly)

VirtualSmTound willnotbe effectiveifthesound

mode is set to something other than STEREO.

EN

01All

4>

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 42 (_

T }IE J_¸_:¸_'_"_>_-'_ v __ _J,___4¸_'r'_¢__

You can check the in£)rmation about the current disc by pressing the DISPLAY button on the remote control.

For DVD-Vs

_,,',_,, [} P AY <_</_<!.<

to s ow c_J_ e t O _It_:m

•The elapsed and remaining ()

playing time of the current / _2__ ...............,-Il

chapter _aill be displayed. _'- "......

2Press_ _':OSP!..AY b_ _o_ag_ io>how

co_e stT e

The elapsedand remainingplayingdineof thecur-

rent title will be displayed.

The BIT RATE and the current repeat setting will be

displayed.

If you are playing a dua! layered disc, the layer ram>

bet will also be displayed (LO: Layer 0 is playing.

LI: Layer i is playing).

4Press tb,.;_D S>L/<¢ :_g_:_,/o ex/h÷

For audio CDs

P:; d_,.:i3Sf.l.,.iW <_;_ ;<,:.....

The elapsed and remaining playing time of the cur-

rent track will be displaye&

<

<:_[re< Tr<<I,;

The elapsed and remaining playing time of the cur-

rent track will be displayed.

2Pesst}_eDSPgA?'b<tto g_!:}:!_i_toextt_÷

<$spsy

42 EN

01All

+

T0005UF(P36-SI).QX3 04.4.7 1:25 PM Page 43

Langlmge options arc not available with some discs.

P e_<,:_ e f!;_':._?'I,)p, to_ w<:e r %70P

s_od8soi e_ he DVDS_iT'UPsI_:_

:_ppea{5

• Ifthemenu doesnotappear,pressthePLAY buttom

the STOP buttcm, then the SETUP button twice.

.....' il

2Pesst eA_/owbutot_'{g toseectOUS_,

TO/_i tse_ press t'e _::_NT_}iRbu_tot_

CUSTOM nrode will appear.

3Pr_<.:: Ar<)wb /o_{_J'_'} ose_c

LAIeG.!AG_;£'te press he ElsS'S_'}'[Rb tos

_o

..... _

AUDIO

,# P/_sstheA/ow bu o/_ _ o se_!_c _e

nex/ tB_SS e! press tse BN'117£[_hutch

AUDIO: Sets the audio language.

SUBTILE: Sets the subtitle language.

DISC MENU: Sets the lan_tage *Br DVD menu.

?

,.... ,, , <, x,h{s <}?:/ S

If OTHER is selected on the AUDIO, SUBTITLE or

DISC MENU screem press fouPdigit number to

enter the code for the desired language. (Refer to the

language code list.)

Only the langmages supported by the disc can be

selected.

NOTE

Language Setting lbr Audio and Subtitle is not avail=

able _aith some discs. Then use the AUDIO and the

SUBTITLE buttons. Details are on page 41.

TO CMT;NGE}" 7#{}7'OM,@Cf:?_i!}'_TA/_2_'}}#dUS

You can access the TV/VCR SETUP rrlenu by pressing

the SETUP button fiom the DVD mode. Refer to

'_SELECTING THE LANGUAGE" on page 15 to

changing the on-screen menus.

Language Code

AdB

Abkhazian 4748

Afar 4747

Afrikaans 4752

Albanian 6563

Arnharic 4759

Arabic 4764

Armenian 5471

Assamese 4765

Aymara 4771

Azerbaijani 4772

Bashkir 4847

Basque 5167

BengaH;Bangta 4860

Bhutani 5072

Bihari 4854

Bislama 4855

Breton 4864

Bulgarian 4853

Burmese 5971

Byetorussian 4851

C-E

Cambodian 5759

Catalan 4947

Chinese [CHI] 7254

Corsican 4961

Croatian 5464

Czech 4965

Danish [DAN] 5047

Dutch [DUT] 6058

English [ENG] 5160

Esperanto 5161

Estonian 5166

F-H

Faroese 5261

Fiji 5256

Finnish [FIN] 5255

French [FRE] 5264

Frisian 5271

GaHcian 5358

Georgian 5747

German [GER] 5051

Greek [GRE] 5158

Greenlandic 5758

Guarani 5360

Gujarati 5367

Hausa 5447

Hebrew 5569

Hindi 5455

Hungarian [HUN] 5467

icelandic lICE] 5565

indonesian 5560

lnteriingua 5547

lnterlingue 5551

lnupiak 5557

Irish [IRt] 5347

Italian [FA] 5566

Japanese [JPN] 5647

Javanese 5669

Kannada 5760

Kashmiri 5765

Kazakh 5757

KJnyarwanda 6469

Kirghiz 5771

Kirundi 6460

Korean [KOR] 5761

Kurdish 5767

Language Code

L-N

Laothian 5861

Latin 5847

Latvian;Lettish 5868

Lingala 5860

Lithuanian 5886

Macedonian 5957

Malagasy 5953

Malay 5965

Malayalam 5958

Maltese 5966

Maori 5955

Marathi 5964

Moldavian 5961

Mongolian 5960

Nauru 6047

Nepali 6051

Norwegian [NOR] 6061

O-R

Occitan 6149

OMya 6164

Oromo(Afan) 6159

Panjabi 6247

Pashto;Pushto 6265

Persian 5247

Polish 6258

Portuguese [POP.] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS] 6467

Samoan 6559

Sangho 6553

Sanskrit 6547

Scots Gaelic 5350

Serbian 6564

Serbo-Croatian 6554

Sesotho 6566

Setswana 6660

Shona 6560

Sindhi 6550

Singhalese 6555

Siswat 6565

Stovak 6557

Stovenian 6558

Somali 6561

Spanish [SPA] 5165

Sundanese 6567

Swahili 6569

Swedish [svgE] 6568

T

Tagalog 6658

Tajik 6653

Tamil 6647

Tatar 6666

Telugu 6651

Thai 6654

Tibetan 4861

Tigrinya 6655

Tonga 6661

Tsonga 6665

Turkish [TUR] 6664

Turkmen 6657

Twi 6669

U-£

Ukrainian 6757

Urdu 6764

Uzbek 6772

Vietnamese 6855

Volapuk 6861

VVelsh 4971

VVotof 6961

Xhosa 7054

Yiddish 5655

Yoruba 7161

Zutu 7267

If you choose a Language that has a 3 letter langtmge

code, the code wi!l be displayed every time you change

the Audio or Sttbtide langttage setting on page 41 If

you choose any other langgages, <-' wil! be displayed

_nstead.(3 letter language code is written in bracket)

43 EN

01All

T0005UF(P36-BI).QX3 04.4.7 1:25 PM Page 44

You can change certain aspects of the DVD display

screens and on=screen messages on the TV screen.

P<,¢, };_:: _<, ,/ ...... v > £)b _><{<

< =g},, 4<,if;,_,

:,<} < ;¢ , [):_/ #,>;: ,,P g{? < _}7}1}@?;{;

• It'the menu does not appear, press the PLAY button,

the STOP button, then the SETUP button Paice.

SETUP I ]

, ::1:,:_ /5, W '_g (,LS,

,( , _,g ..... _. ,

•CUSTOM mode will appear.

{ v,{ ,{, {{ {

PL.:'_Y : e )<:ssib;_12N'/7:R :_ tt) :oco .

SETUP _ ] I

',} ! }I _ <gg

/: :)w ::: s,t/< >esst < _7_'"[_:R >;to

TV MODE:

Press the Arrow button (&/_) l[)r an item selection,

then press the ENTER button.

Select 4:3 LETTER BOX for black bars to appear on

top and bottom of the screen.

Select 4:3 PAN & SCAN %r a full height picture

with both sides trimmed.

The dethuh setting is 4:3 LETTER BOX.

STILL MODE:

Press the A1Tow button (A/_')Ibr an item selection,

then press the ENTER button.

Select "AUTO" usually.

It"you select <'FIELD", the picture in the still mode

will be stabilized.

If you select "FRAME", the picture in the still mode

will be highly delined.

ANGLE ICON:

Press the ENTER button repeatedly to turn Angle

icon ON or OFF.

The dethuh setting is ON.

AUTO POWER OFF:

Press the ENTER button repeatedly to turn Auto

Power off ON or OFF.

The default setting is ()IX"and it will turn the

-[ViVCRiDVD off automatically after 20 mimttes of no

use.

Choose the appropriate Audio settings for your equip=

ment as it only affects during the playback of DVD

discs.

P<ess tse SKTU_:: burros tw se _': SLOP/_;o{e

so_sa seDVG SETJP <'e_> ap/>eas

If the menu does not appear, press the PLAY button,

the STOP button then the SETUP button twice.

..... ]

....... ' ' '........ <S: _:C; <_,<o2 ':_ e9 ;, e /%iv" {,71<> _ '_F /° "<:

,.... i:) sf: f" EIN'Kfq bu:f:

• CUSTOM mode _xill appear.

9 ¢'<_egs t' A ow ;*,,_ {,&11_ } to se _,,:;t

,,, ....... {'e" "" {:< t e [£f,"g/£R [ It) o

co" >

tANGUAGE

DISPLAY

__l AUDIO I

:!_ ,!:> A7 '<%; AI<{ i/ " 7> "

L_ i < 7...... , :,, r+t_ f'_: fZ_/Tf::i:¢ :)_¢P,: ':,

DRC (Dynamic Range Control):

To compress the range of soft to loud sound.

The defimlt setting is ON.

DOWN SAMPLING:

Set to ON when outputfing in 48 klBz.

The default setting is ON.

When pla3ing disc with cop3 right Protection

If you select OFK copyright protection will be acti=

rated and sound will be down sampled at 481_Iz.

DOLBY DIGITAL:

Set to On when the unit is connected to a Dolby Digital

Decoder

(ON: Output a Dolby Digital signal)

(OFF: Convert the Dolby Digital to PCM (2 channel

stereo))

The defauh setting is ON.

'¢> b<< JP _<_tl<>}t<>ex7%

44 EN

01All

T0005UF(P36-SI).QX3 04.4.7 1:25 PM Page 45

£4 R EN 7"XL L E _I:iL

Parental Level allows you to set the rating level of

your DVD discs. Playback will stop if the disc's rat-

ings exceed the level you set.

Pes_ h<:{SET )Pb>/:/:<_r wc<_ st<eRr od4_

so t at te QOOK S/[Yl'bP _em_ appe<::us,

• If themenu does not appear,pressthe PLAY button,

the STOP button, then the SETUP button twice.

70_,k p_'ess_e /Ti£NY'EA/:_t_o _

NI_IALIZE

CONhsTOL LEWSi_LS

cALL

All parental lock is cancelled.

•Level 8

DVD sotiware of any grade (aduh/general/children)

can be played back.

• Levels 7 to 2

Only DVD sotiware intended tDr general use and

children can be played back.

•Level 1

Only DVD sotware intended _\_rchildren can be

played back, with those intended for adult and

general use is prohibited.

FYOU FORGET 77-{E PASSWORD

P_!_ss t'e h_ m _e_"b/,:tto_s 4 7 3 7;;:_tstep 4

T/'e_e!,te your _ew}>asswod.

• Password will be cleared and parental level will be

set to ALL.

2P<y<_<d_" <, S >s 5,,7 a<B_ _

........... , :>

SETUP ICUSTOM I

LANGUAGE

DISPLAY

AUDIO

This allo'_xs you to return all selections of SETUP

(except for PARENTAL) to their default settings.

} ..... N7 AL, ZE ap:>e_;,

t :e iT<

NOTES

• When doing this for the first time, enter any 4 digits.

(except tbr 4737) That number wil! be used as the

password.(in the event you tDrget the password, see

below)

•To change the password, press the Anow button

(_/W) to select CHANGE at step 5, then press the

ENTER bumm. Enter the tDu>digit password, then

press the ENTER button.

• With some DVDs, it nmy be difficuh to rind it they

are compatible with parental lock. Be sure to check

if the parental lock ftmction operates in the way that

you have set.

•Record the password in case you tbrget it.

45 EN

01All

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 46

If the TV!VCPJDVD does not perlbrm properly when operated as instructed in this Owner's Manual, check

the TV/VCR/DVD, consulting the tbllowing checklist.

PROBLEM

No power

The TV/VCWDVD does not

respond to the remote control

( ORRE( TIVE A( TION

* Make sure the power plug is connected to an AC outlet.

* Make sme the power is turned on.

* Check if the power plug is connected to an AC outlet.

* Check the batteries in the remote control.

* Aim the rernote control dircctly at the rernote sensor. If necessary,

remove a!l the obstacles between the sensor and the remote.

* You have to be within 23 lbet of the TV/VCR/DVD

*Check if the correct mode is selected. If not switch the mode by

pressing the SELECT button on the remote conm)l,whichever you need

ITV/VCR Mode I

Sometimes a perfi)rrnance problem can be easily solved by checking seemingly apparent but often overlooked

)ossibilifies. Belbre alTanging l\_r service, check these items. It could save yore' time and money.

PROBLEM ( ORRE( TIVE A( TION

No picture and sound * Make sure the AC cord is connected to an AC outlet.

• Check antenna connectiom

• Press the SELECT button on the renrote control to select TV nrode.

Then try oflaer TV feature.

* Let the TV/VCR/DVD piv}gram its tuner memoi 7.

No picture or poor picture on * Adjust direction or replace antemm.

TV/VCWDVD * Adjust picture controls.

No sound or poor sound * Adjust volume control on remote control or nrain unit.

* Press the MUTE button to restore sound.

Bars On Screen * If outside antenna is being used, check fbr broken wire.

* Check lbr local interference.

Pictm"eDistorted or Blurred * Try a new channel, if OK, then possible station trouble.

* If"outside antenna is being used, check liar broken wire.

Picture Rolls Vertically * TU a new channel, if OK, then possible station trouble.

Lines or Streaks in Picture * If outside antelma is being used, check liar broken wire.

*Check fbr local interference.

No Color *Try a new channel, if OK, then possible station trouble.

* Is antenna connected to terminal on the back of the set'?

* If outside antenna is being used, check liar broken wire.

* Adjust COLOR control.

Poor Reception on Some Channels * T<Va new channel, if OK, then possible station trouble.

Ghosts m Picture * Is antenna connected to temrinal on the back of the set?

* If"outside antemm is being used, check liar broken wire.

*Check for local interference.

Weak Picture * T<i a new channel, if OK, then possible station trouble.

* Is antemm connected to tel_rtinal on the back of the set'?

* If outside antenna is being used, check l\_r broken wire.

* Adjust CONTRAST & BRIGHT control

Sound OK, Picture Poor * TI37a new channel, if OK, then possible station trouble.

* Is antemm connected to tenrdnal on the back of the set'?

* If outside antenna is being used, check fbr broken wire.

* Check lbr local interference.

* Adjust CONTRAST & BRIGHT control

46 EN

01All

TOOO5UF(P36-51).QX3 04.4.7 1:25 PM Page 47

PROBLEM

Picture OK, Sound Poor

7imer recording is not possible

Cannot go into Record mode

Playback picture is partially noisy

No picture but the audio is OK in

playback

No operation by in_ared Remote

Control

Video or color titdes in and out

when making a copy of a video tape .

Different color realks on screen

( ORRE( TIVE A( TION

* Try a new channel, if OK, then possible station trouble.

* Check for loca! interference.

* Make sure the timer recording is set correctly.

* Make sure the power is off

* Make sure the TV/VCR/DVD clock is set conectly.

* Make sure the tape has an erase=prevention tab. If need, cover the

hole with plastic rope.

* Adjust tracking control for a better picture using the CHANNEL

button _, or _ on the TV/VCR/DVD.

* Head cleaning nmy be necessa W. Refer to "AUTO HEAD

CLEANFNG" on page 49.

* Make sure the AC cord is connected to an AC outlet.

* Check batteries in remote control.

* You can not copy a copyrighted video tape. You are experiencing

copy guard protection.

* Magnetism fl-om nearby appliances and speaker systems might aft_ci

the color of the TV picml-e. Move the TV/VCR/DVD away flom the

object. Refer to "DEGAUSSING" on page 19.

(LOSED CAPTION PROBLEM

My TV/VCR/DVD is showing

captions that are misspelled.

My TV/VCR/DVD will not show

the text dialogue in its entirety or

there is a delay of what is being

said.

My captions are scrambled with

white boxes on the TV screem

My program guide listed a TV show

as being closed captioned but none

of the captions were displayed.

My prerecorded video rope does not

show any captions. The tape box

mentions it being closed captioned.

My TV screen shows a black box

on certain channels.

POSSIBLE REMEDY

*You are watching a live broadcast and spelling errors made by the

closed captioning production company nmy pass through uncolTected.

A prerecorded program will not show any rnisspelled words because

of the norma! time available %r editing the captions.

* Captions that are delayed a few seconds behind the actual

are common for live broadcast. Most captioning production

companies can display a dialogue to a nmximnrn of 220 words

per minute. If a dial%me exceeds tlmt rate, selective editing is used

to insure that the captions remain upoto-date with the current

TV screen dialogue.

* Intert_rence caused by building, power lines, thunderstorms, etc.

nmy cause scrambled or incomplete captions to appear.

* Broadcasters nmy at times use a time compression process to speed

up the actual program so that additiona! advertising time can be

given. Since the decoder cannot read the compressed in_brmatiom

captions will be lost.

* The video tape was either an illegal copy or the tape duplicating

compa W accidentally leti out the captioning signals during the

copying process.

*You are in the TEXT mode. Select CAPTION mode m CAPTION

[OFF].

47 EN

01All

4>

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 48

[DVD Node ]

PROBLEM (ORRE( TIVE ACTION

No picture ° Insert a correct video disc tlmt plays on this TV/VCR/DVD.

° Press the SELECT button on the remote control to select DVD mode

Then, try other DVD feature.

Disc cannot be played ° Insert the disc.

° Clean the disc.

° Place the disc correctly, with the label side up.

* Cancel the parental lock or change the control level.

No sound ° Connect the audio cables fimaly.

°Turn the power of the audio component on.

* Coirect the audio output settings.

° Correct theinput settings on the audio cornponent

No DTS audio is output ° This TV/VCPUDVD does not support DTS audio. This is not a real=

fLtnction.

Distorted picture ° There are some cases where pictures may be slightly distorted, which

are not a sign of a ma![:tmctiom

° Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language ° The selected language is not available *br audio or subtitles on the

does not match the set up DVD.

This is not a malfunction

° The DVD does not contain sequences recorded fiom dif*}rent calnerg

angles. This is not a mal_imction

° The DVD does not contain audio source or subtitles in the selected

language. This is not a mal*imctiom

° That operation is prohibited by this TV/VCR/DVD or the disc.

This is not a rnalftmction.

° Scratched disc. Replace the disc with an unscratched one.

The camera angle cannot be

changed

Audio or subtitle language cannot

be changed

_{Prohibited ico_f' appears on the

screen, prohibiting an operation

CD sound dropout

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD r_rodLtcfion

NOTES:

*Sorne ftmctions arc not available in specific modes, but this is not a malfm_ctiom Read the description in

this Owner's Manual for details on coirect operations.

* Playback *iom a desired track and random playback are not available during progqam playback.

48 EN

01All

4>

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 49

* Wipe the front panel and other exterior sur_hces of

the TV!VCWDVD with a so_}cloth immersed in

lukewarm water and wrung do<

* Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV,WCR/DVD. Such chemi-

cals may cause damage and discoloration to the

exposed sur_hces.

,?70 HgL4} CL/!L4 '_?"_'_{;

* Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

* Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long periods

of use or the usage of rental or worn tapes can

cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in yom TV/VCP, JDVD may

need to be cleaned.

1.Please visit yotlr local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the prob-

lem, please call our help line at 1-800-968-3429, to

locate an Authorized Service Center.

NOTES:

* Remember to read the instructions included with

the video head cleaner before use.

*Clean video heads only when problems occur.

* Should your TV/VCR/DVD become inoperative,

do not try to correct the problem by yoursel[ There

are no user-sel_iceable parts inside_ Turn off

unplug the power cord and please call our help line

at 1-800=968-3429, to locate an Authorized Service

Center

I/TRVTL, _}!;_()PT?4;:_L PI<'k } L ;_/T L%'D?/?7}

* If the TV!VCWDVD still does not perform properly when it is operated while refclTing to the relevant sec=

tions and m "TROUBLESHOOTING GUIDE" in this Owner% Manual, the laser optical pickup unit nmy be

dirty. Consuh your dealer or an Authorized Service Center for inspection and cleaning of the laser optical

pickup unit.

* Use discs which have the %llo'_xing logos on them.

(Optical audio digital discs.)

..... o.o._.o.o _

DVD+R DVD+ReWritable

* Handle the discs so that fingerprints and dust do

not adhere to the snr[hces of the discs.

* Always store the disc m its protective case when it

is not used.

49

®To clean-off use a soft cloth.

®Do not use a hard cloth since this wil! mar the disc.

* Wipe the disc in a straight line from center to edge.

* Never wipe with a circular motiom

* Do not use detergent or abrasive cleaning agents.

EN

01All

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 50

GL!)_]<!,/?,dL_PI}i 770<{<

[ TVIVC R ]

CRT 19 inch in-line gxm,

90" deflection robe

Television system : NTSC-M

Closed caption system :§15.119/FCC

t},ZL{<TtiU'] Z %PE(7174)I _76_>,,7<

Sound output: 2 speakers, IW. 8 ohm

Terminals

Antenna input:

Video Heads : Rotary %ur-head

Tape width : 1/2 inch Video inpuL

Tape speed Audio L/R input:

SP: 33.40ram/see. Headphone:

LP :16.67mm/sec. Coaxial digital

SLP : 11.12mm/sec. audio output:

Tm_er channel

TV VHF Low : #2- 96 Remote control:

TV VHF High : #7 # 13

TV UHF : #14- #69 Operating

CATV temperature:

VHF : 5A

MID band :A5 AI, A I Power requirements:

SUPER band : J- W Power consumption

HYPER band : W+I W+84 (Maxmmm):

Picture robe:

Dimensions:

VHF!UHF/CATV

75 ohm unbalanced (F-type)

RCA connector × 1

RCA connector ?< 2

1/8" stereo (3.5 ram)

One pin jack,

500m Vpp (75 ohm)

Digital encoded

infiared light system

5°C to 40°C

Weight:

AC 120V. 60Hz

90W

19"

H: i9- i 1/i6" (500ram)

W:2!-7/8" (556mm)

D: 18-7/8" (480ram)

46.3 lbs (21kg)

Product type: DVD Player

Discs: DVD video, Audio CD

Output signal fommt: NTSC color

* Designs and specifications are subject to chmtge without notice.

* If there is a discrepancy bem'een languages, the default language will be English.

50 EN

01All

T000BUF(ES).QX3 04.4.7 11:03 AM Page Bl

[] (.DNTROLES DE OPERA(.ION Y FLTVLIONES ..... S1

PANEL FRONTAL DEL TELEVISOR DVD .......... 51

MANDO A DISTANCIA ......................... 51

VISTA POSTERIOR ............................ 51

[] PREPARA(70N PARA LA UTILIZACION .......... $2

CONEXIONES DE ANTENAiCABLE .............. 52

CONEXION A TOMAS DE ENTRADA EXTERNA .... 52

PARA INSERTAR LAS PILAS .................... 53

MODO DE ENTRAI)A EXTERNA ................ 53

CONEXION A UN SISTEMA ESTt_REO ............ 53

CONEXION A U2N AMPLIFICADOR ESTt_REO

EQUIPADO CON TOMAS DE ENTRADA DIGITAL,

PLATINA MD O PLATINA DAT (Para DVD) ......... 53

CONEXION A tiN DECODIFICADOR DOLBY DIGITAL

(para DVD) ................................... 53

SECCION DE TV/VCR

[] PREPARA(70N PARA LA UTILIZACION .......... 53

SELECCI<)N DE IDIOMA ....................... 53

AJUSTE DE CANALES ......................... 54

AJUSTE DEL RELOJ ........................... 54

SECCION DE OVO

REPRODUCCION BA.SICA ...................... 54

#!'_% h}'%[ <'< )_"

[Consulte la figura 1 de la paigina 9 [

I Consulte la figura 2 de la paigina 9 j

[(ensuRe la figura 3 de la pJgina 10 [

1° gotdn POWER

Presione este botdn para conectar y desconectar la ali-

mentacidn,

2. gotones VOLUME A/V

Presione estos botches para controlar el nivet de volurnen

del DVD y el televisor.

3. gotones SKiP (para DVD)

Presione el botdn correspondiente una vez para omitir

capitulos o pistas y desplazarse ann punto especifico.

Mantenga el botdn presionado para cambiar la velocJ-

dad de reproduccidn en avance o retroceso.

4. Botdn PLAY

Inicia ta reprodnccidn del contenido del disco o cinta.

5. gotdn STOP

Detiene la reprodnccidn del disco.

6. gotdn OPEN/CLOSE

Presione este botdn para insertar discos en ta bandeja o

retirarlos de ella.

7. Bandeja de carga de[ disco

8. Indicador DVD

Se ilumina durante el modo DVD

9. gotdn SELECT

Presione este botdn para cambiar al modo TViV( R,

modo de entrada extema o modo de DVD

10. Indicador TVIVCR

Se ilumina durante el modo TViVCR,

11. gotones CHANNEL A/V

Utillce estos botches pare seleccionar canales memorizados. 51

12. hdicador de grabacidn

Parpadea durante la grabacidn. Se ilumina durante el

modo de espera de grabacidn controlada pot temporizador,

13. Botdn REC/OTR (Panel frontal)

Presione para empezar ta grabacidn manual, Presione

repetidamente para empezar ta grabacidn instantSnea

(()TR),

gotdn RECORD (Mando a distancia)

Presione para empezar ta grabacidn manual.

14. Botdn REW (para TV/VCR)

Presione este botdn para rebobinar la cinta o para vet

ta imagen r@idamente en direccidn de retroceso

durante el modo de reprodnccidm (B0squeda en direc-

cidn de retroceso)

15. Botdn F.FWD (para TV/VCR)

Presione este botdn para adelantar r@idamente la cinta

o para vet ta imagen rhpidamente en direccidn de

avance durante el modo de reprodnccidn, (Bi_squeda en

direccidn de avarice)

16. Botdn STOP/EJEOT

Presione este botdn para detener la cinta, Presidnelo en

el modo de parada para retirar ta cinta del

televisor videograbadoraiDVD

17. Ventanii[a de[ sensor de mando a distancia

18. Toma HEADPHONE

Para conectar auriculares (no suministrados) y escuchar

en privado,

19. Toma de entrada VIDEO

(onecte aqu{ la tonm de salida de video de mm

videocfimara o de mm videograbadora

2{). Tomas de entrada AUDIO L/R

< onecte aqu{ las tomas de salida de audio de una

videocfimara o de una videograbadora

21. Compartimiento de[ cassette

22. Botdn PmCTURE

PresJone este botdn para ajustar la imagen

23. Botones num4ricos

Modo TV:

Presione dos botches para acceder directamente al

canal deseado,

No olvide presionar "0" antes de elegir un canal de un

solo digito,

gotdn +100

Presione este botdn para seleccionar canales de tele°

visidn pot cable cuyo n0mero sea igual o superior a 100,

Modo DVD:

Presione este botdn para introducir el ndmero deseado,

Botdn +10

Presione este botdn para introducir nOmeros iguales o

mayores qne 10,

24. Botdn PAUSE

HaLe una pausa en ta reprodnccidn del disco o cinta,

25. Botdn SPEED

Presione este botdn para seleccionar la velocidad de

grabacidn deseada: SPiSLR

26. Botdn C.RESET

Presione este botdn para ponm el contador en 0:00:00,

Presidnelo tarnbi@* para cancelar un ajuste de progra-

ma de temporizador

27. Botdn DBSPLAY

Modo TV/VCR:

Para visualizar el contador o el n£ur_eio del canal y ta

fccha actual en la pantalla del televisor,

Modo DVD:

Indica el estado actual en la pantalla del televisor para

tines de comprobacidm

28. Botdn SETUP

Presione este botdn para activar o salir det modo de

menf_s de televisor o confJguracidn de DVD.

29. Botdn TITLE

Para visualizar el meng de timlos.

ES

0C28

+

T0005UF(ES).QX3 04.4.7 11:03 AM Page 52

30. Bot6n CLEAR

Para cancelar ajustes.

31. Botdn MODE

Acfiva el modo de reproduccidn Fogramada o el modo de

rcpro&ccidn aleatoria.

32. Botdn SEARCH MODE

Presione este botdn para localizar un punto deseado.

33. got6n AUDIO

Presione este botdn para seleccionar nn idioma de

audio o el modo de sonido deseado

34. Botdn SUBTITLE

Presione este botdn para seleccionar el idionm de subtio

mlos deseado.

35. Botdn REPEAT

Repite la repioducci&_ del disco, t{mlo, c3p{mlo o pista actual.

36o Botdn ANGLE {modo DVD)

Presione este botdn para cambiar el fingulo de la cdmara

y vet ta secuencia que se estfi reproduciendo desde un

fin_llo dif_rente.

37. gotdn A-g REPEAT

Repite ta reprodttccidn de una seccidn seleccionada

38. 8otdn RETURN

Permite volver a la operacidn anterior en el modo de

configuracidn de DVD,

39. Botdn ENTER

Presione este botdn para establecer un ajuste.

40° Botones de flechas

Modo TV/VCR:

Presione estos botones par3 sebccionar un modo de

3juste en el menfi qne 3parece en 13 pant3!13 del televisor.

Presidnelos tambidn para seleccionar opciones 0

establecer ajustes en un mend en particuta>

Modo DVD:

Use estos botones para haler ajustes mientras observa

ta inmgen en la pantalla del televiso>

41. Botdn DISC MENU

Moestra los mends contenidos en el DVD.

42. Botdn V.SURR

Activaridesactivar el envolvente virtal

43. Botdn MUTE

Suprime la salida de sonido Presidnelo de nuevo para

restablecer el sonido

44. Botdn SLEEP

Utilice este botdn p3r3 ajustar el temporizador de dormir.

45. Botdn SELECT

Presione este botdn p3ra cambiar entre los modos

TV_CR y DVD, El nrodo seleccionado (TV VCR o

DVD) se visualiza en el indicador del panel delantero,

46. Toma de entrada ANT,

Condctela auna antena, sistem3 de televisidn por cable

o sistema de satdlite.

47. CaMe de a[imentacidn

Con6ctelo auna toma de CA estfindar (120 V./60 Hz).

NOTA: Antes de conectar el cable de alimentacidn a

una toma de CA estdndar, retfi'elo del gaucho

para evitar dafiarlo.

48. Toma de sa[ida de audio digital COAXIAL

( on&rein solamente 3 t3 entrad3 digital de un amplifi-

cador extemo o decodificador de audio de DVD

s_

( onsulte Ia figm'a 4 de Ia paigina 11 ]

%<;/!1]<4]},:!? t}E I<HFH'7I,<

En aigtmas zonas ser/t necesario utilizar una antena

exterior.

<'_)'\._"i.b_}' ])()]?

Utilice esm conexidn si su sistema de televisidn por

cable se conecm direcmmente a su televisor/

videograbadora/DVD, sin una caja de convertidor.

Con esta conexidn podr{t:

1) Utilizar el mando a distancia del televisor/

videograbadora/DVD pare seleccionar canales.

2) Do_amar uno om{ts canales decodificados para

grabacidn aummStica controlada pot temporizador.

NOTA: Este televisol/videograbadora/DVD SOL()

puede grabar e! canal que se est{tviendo.

7k / f3 15,</O'_.P()/,#C41/L E_ 5""_,+<1454

LU:; ,<717_7/!){7,&_<Ui<77D fT<; tT(?;_f

O(Tgl; Z) 7 %, T]!, ;.7'71<'i

Si su compafia de televisidn por cable le SLmfinistra

una caja de convertidor o si utiliza un sistema de

satdlitc, pod% utilizar la conexidn bdsica que se

muestra en la ilustracidn.

A1utilizar esta conexidn, tambi_n podfft grabar canales

codJficados. Sin embargo, la seleccidn de los, canales

deberd hacerse con la caja de convertidor o con la caja

de sat_lite. Esto significa qt_e no es posible cambiar de

canal utilizando el mando a distancia del televisor/'

videograbadoraiDVD. La grabacidn en ausencia (contro-

lada por temporizador) estd limitada aun canal a la vez.

PARA GRABAR UN CANAL

CODIFICADO/DE( ODIFI( ADO

l.Ajuste el selector de canales del

televisorNideogmbadora/DVD al canal de salida de

la caia de convertidor de televisidn por cable o caja

de sa_lite. (Ej., CH3)

2.Seleccione el canal que &sea grabar en la caja de

convertidor de televisi(m pot cable o caja de sat_lite.

Nota para el instalador de sistemas CATV

Esta nora tiene la finalidad de llamar la atencidn

del instalador de sistemas CATV para que tenga

en cuenm el Articulo 820=40 de la NEC, que pro=

porciona rccomendaciones para haler una cortex=

idn a tierra apropiada > en particular, especifica

qne la tierra del cable debe conecmrse al sistema

de puesm a tierra deI edificio, tan cerca del punto

de entrada del cable como sea posible.

Cumldo yea un program3 grabado cn otr3 fuente (videograbado-

r3 o videocdmar3),utilice lastomas de entmdade 3udiowideo

de la parledelanter3dettelevisorividcograbadoraiDVD_

(onecte las tonms de salida de audio video de otra fhente a

las tonmsAUDIO _R v VIDE() de este televisor/

xideograbadora DVD Lue_o, presione los botones CHAN-

NEL A_ hasta que 3parezca "AUX" en tapantalta

NOTA:

*Cuando conecte una videograbadora monofdnica (otra

fuente) a este televisor videograbadoraiDVD, conecte la

toma de salida de audio de ta videograbadora monofiSnica

(otra f_aente)a la toma AUDIO L de este

televisor videograbadoraiDVD. El audio sal&fi igual-

mente pot los canales izquierdo y derecho.

[ Consulte Ia figm'a S de Ia paigina 12 l

[ 1

52 ES

0C28

+

T0005UF(ES).QX3 04.4.7 11:03 AM Page 53

1) Abra la cubierta del compartinfiento de las pilas

empujando la cubierta del mando a __

distancia en el sentido de la flecha.

2) Inserte 2 pilas "AA" en el

comparrimiento de las pilas, en el

sentido indicado por las marcas de polaridad (+/-).

3) Vuelva a poner la cubierta.

A1usar una serial de entrada externa (o_ravideograbado-

ra o una videocfimara), conecte !os cables de salida de

audio/video del equipo externo a las tomas AUDIO MR

IN/VIDE() IN de su televisor/videogqabadoraiDVD.

Luego, presione los botdn CHANNEL A o V hasta que

aparezca "AUX" en la pantalla.

( onsuRe la figura 7 de la pfigina 14 I

NOTAS:

* Asegfircse de desconecmr la alimentacidn de todos

los componentes del sistcma antes de conectar otto

componentc.

*Consuhc los manuales de instrucciones de los

componentcs que va a conecmr al televisor/

videograbadora!DVD.

* Si conecm un decodificador Dolby Digital, aiustc

la ftmcidn DOLBY DIGITAL a ON para salida de

audio en el modo de configuracidm

* A menos que se haga la conexidn a un decodifi-

cador Dolby Digital, ajustc Ia ftmcidn Dolby

Digital a OFF para salida de audio en el modo de

configuracidn. La reproduccidn en un

televisol/videograbadora/DVD utilizando ajustes

incorrectos puede generar ruido y distorsidm y

tambidn puede causar dafios a los almvoces.

Fabricado bNo lcencia de Dolby I

Laboratories: '!Dolby!' y el Mmbolo de la D I

done son mamas def_brica 6eDo!by I

Laboratories. j

Utilice un cable digital coaxial de audio de vema en e!

comercio especializado para hacer las conexiones de audio.

Conexidn a un amplificador equipado con tomas de

entrada digital, platina MD o platina DAT

[ ( onsulte la fgura 6 de la p/_gina 13 ]

! [

NOTAS:

* La ft_entede audio de un disco grabado en %rmato de

sonido envolvente Dolby Digital de 5,1 canales no se

puede grabar como sonido digital mediante una plati-

na MD o DAT.

* Asegfirese de desconectar la alimentacidn de todos

los componentes de! sistema antes de conectar otro

componente.

* Consulte los manuales de instmcciones de los compo-

nentes que va a conectar al televisor!videograbadorai

DVD.

* Ajuste la f,_mcidnDolby Digital a OFF para salida de

audio en el modo de configuracidn. La reproduccidn

en un televisor/videograbadoraiDVD utilizando

ajustes incorrectos puede generar ruido y distorsidn, y

tambidn puede causar dafios a los altavoces

Si utiliza este televisor/videograbadora/DVD para

repro&._cir un disco DVD grabado en _\_rmato de

sonido envolvente Dolby Digital de 5, ! canales, el

televisor/videograbadora/DVD emitirit un l'lL_jode

datos DOLBY DIGITAL des& su toma de salida de

audio digital COAXIAL Si conecta el reproductor a

un decodificador Dolby Digital, podrit disfi°Ltmrde

una tonalidad m{ts convincente y real, con un sonido

envolventc potente y de aka calidad similar al de los

cines.

Utilice cables digimles coaxiales de audio

disponibles en el cornercio especializado para hacer

las conexiones de attdio.

53

[TV/VCR]

Enclaffc el corddn de alimentacidn del

televisorivideograbadoraiDVD en tma toma de CA

estfndar

NOTA:

* Si aparecen algunas ciffas en la esquina de la pan-

talla, pulse el botdn POWER sin desenchufar e!

corddn de alimentacidm

Aseg{lrese de we ...

* Pulse el botdn POWER para encender e!

televisorivideograbadoraiDVD.

NOTA: Esta funcidn afccta sdlo el idioma en el menfi

de la panta!la y no la fuente de audio.

Pulse el botdn SETUP en el mando a distancia.

Pulse e! botdn _, o V para sefialar "LANGUAGE".

"r'<_-,N{vA >

Seleccione "ENGLISH", "ESPAlqOL"o"FRAN('AIS"

con el botdn ENTER.

Pulse el botdn SETLTPen el mando a distancia para

voh'er al modo de! televisor.

ES

0(28

4>

T000BUF(ES).QX3 04.4.7 11:03 AM Page B4

NOTA: Si, pot alglma razdn, el mcnil est{ten inolds o

liancds, pulse el botdn SETUP en el maMo a dismncia,

pulse el botdn A o T para sefialar el "LANGUAGE

[ENGLISH]" o "LANGAGE [FRAN_AIS]', a contim

uacidn, pulse el botdn ENTER y pulse el botdn SETUP

en el mando a distancia

[TV/VCR ]

Puede programar el sintonizador para buscar todos

los canales que recibe en su localida&

NOTA: E1 canal preparado NO es necesario cnando

estd conectado a una caja de cable o caja de sa_61itc.

Sdlo tiene que seleccionar con el selector de canal

del tclevisor/videograbadora/DVD al canal de salida

de la caja de cabe o caja de sa_61ite(por ejemplo el

cana! CH3). Seleccione el canal a vet en la caja de

cable o caja de sat_lite.

Aseg4rese de que ...

* Pulse el botdn POW%R para encender el televi-

sor/videograbadora/DVD.

Pulse el botdn SETUP en el mando a distancia.

Pulse el botdn A o T para sei_alar "AJ-USTE DE

CANAL".

A continuacidm pulse el botdn ENTER.

1)Pulse el botdn SETUP en el mando a distancia.

Pulse el botdn A o T para indicar "AJ-USTE

RELOJ'.

Luego, pulse el botdn ENTER.

2) Pulse el botdn A o _" para indicar "AA;STE

MANUAL RELOJ'L

Luego, pulse el botdn ENTER.

3)Pulse el botdn A o T basra que aparezca el rues

deseado. (Ejemplo: Mayo o 05)

Luego, pulse el botdn _.

4) Pulse el bot(m A o _" basra que aparezca el dia

del rues deseado. (Ejemplo: 6 o 06)

Luego, pulse el botdn _.

5)Pulse el botdn A o V basra que aparezca el al_o

deseado. (Ejemplo: 2004)

Luego, pulse el botdn li_.

6)Pulse el botdn A o T basra que aparezca la hora

deseada. (Ejemplo: 5, PM)

Luego, pulse el botdn ti_.

7)Pulse el bot(m & o _' hasta que aparezca el minu=

m deseado. (Ejemplo: 40)

8)Pulse el bot(m SETUP en el mando a distancia.

Aunque los seglmdos no se visualizan, dstos

empiezan a contar des& 00 cuando se pulsa

SETUP en el mando a distancia. Utilice esta ftmo

ci(m para sincronizar el reloj con la hora correcta.

Pulse el botdn & o _' para se6alar "AUTOPROGRA-

MACION DE CA".

A continuacidm pulse el botdn ENTER.

E1 sintcmizador busca y memoriza todos los canales

activos en su localida&

E1 sintonizador se dedene en el calml memorizado

m{tsbajo.

*Cuando se activa AUTOPROGRAMACION DE

CA, donde no hay entl-ada de serial del televisor,

aparecer_t "NO HAY SEN-AL DE TV" en la pan=

talla despu6s de terminar la N__tsquedade canales.

* El tclevisor/videograbadora/DVD puede rcconocer

los canales de TV para que sean canales de TV de

antena de cable con las condiciones de recepcidm

En este caso, pruebe nuevamente con el prel_jado

autongttico en las condiciones de recepcidn l_na.

[TV/VCR ]

Cercidrese.°.

°La alimentacidn del televisor/videograbadora/DVD

deberfi esmr conectada.

En el _,emplo & abqio, el mloj va a q/_tsmrse aM

FECHA: 6 de mayo de 2004

HORA: 5:40 PM

Conecte la alimentacidn del amplificador y otros

componentes, si es necesafio.

{ { {, {

..... _><' k/<<>

La alimen[aci6nseconectar{t.

{ { { {{ { { {{{ { { <

, >:_o ,,.........<,){:>[_]_>l<;h<)$[)::>a's" " "_

,]

{ { { { { { { { { {{ { {

;_g [_:}<>}<{k{}{< S<:> < ;:{_@S<9 e _} ba _de]a {;{9}

a< <_1::<a}a< s _} b[

4P<eso ,.:e [:/:6{ _.m.._.Y

La bandeja se celTar{_autom{tticamente y la repro-

duccidn comenzarit des& el primer capitu!o o pista

del disco. Si la reproduccidn no comienza autom_tti=

camente, presione el botdn PLAY

Cuando reproduzca un DVD que tenga gqabado un

men-(t de titu!os, el men{t podr_t aparecer en la pan=

talla.

54 ES

0(28

4>

T0005UF(ES).QX3 04.4.7 11:03 AM Page 55

55 ES

0(28

T0005UF(P36-51).QX3 04.4.7 1:25 PM Page 51

.... Your Home

For repair- in your home-of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

nomatterwhomadeit, nomatterwhosoldit7

For the replacement parts, accessories and

owner'smanualsthatyouneedtodo-it-yourself.

For Sears professional installation of home appliances

anditemslikegaragedooropenersandwaterheaters.

1-800-4-MY-HOME ® (1-soo-,sg-.ss3)

CaIlanytime, dayornight(U.S.A, andCanada)

www,sears.com www,sears,ca

OurHome

Forrepairofcarry-initems,kevacuums,lawnequipment,

and electronics, call orgoon-lineforthe location ofyournearest

SearsParts&RepairCenter.

1-8o0-488-1=2

Call anytime, day or night (U.S.A. only)

www.sears.com

TopurchaseaprotectionagreementonaproductservicedbySears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

..............................................................................................................................................................................................aParadomiciIio,lPedir"888"SU'HOGARSM(I -888-784-6427)servici°Y para ordenarde reparaciOnpiezas: Au Canada1-800-LE-FOYERMc(1www.sears.ca-800-533-6937)pourservice en fran_ais:

SEARS

TM SM

Registered Trademark /Trademark /Service Mark of Sears, Roebuck and Co

TM SM

¢ Marca Registrada /Marca de Fabrica /' Marca de Servicio de Sears, Roebuck and Co

MC MD

Marque de commerce /Marque deposce de Sears, Roebuck and Co © Sears, Roebuck and Co

90 Day Full Warranty

If this (product) experiences any failure due to a defect in material or workmanship within 90 days from the date

of purchase, return it to your nearest Sears Parts & Repair Center, and Sears will repair it free of charge.

After 90 days and until one (1) year from the date of purchase, Sears will replace defective parts free of charge.

You pay for labor.

After 90 days and until two (2) years from the date of purchase, Sears will replace the Picture Tube if it is defec-

tive. You pay for labor.

This warranty applies only if this (product) is used for private household purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, mL60179

For the location of a Sears Service Center in your area : 1o800o488o1222

Primed i_ Chilm IEMN20025

T0005UF _-k_r _r