Contents
- 1. User manual 1 of 2
- 2. User manual 2 of 2
User manual 2 of 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 954895 |
| Application ID | R/hU9mr+QJGeNYfKUGvBNg== |
| Document Description | User manual 2 of 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 229.47kB (2868327 bits) |
| Date Submitted | 2008-06-12 00:00:00 |
| Date Available | 2008-06-12 00:00:00 |
| Creation Date | 2008-05-28 17:49:07 |
| Producing Software | pdfFactory Pro 3.17 (Windows XP Professional Korean) |
| Document Lastmod | 2008-05-28 17:49:13 |
| Document Title | BEPlus_InstallationGuide_V1.0_English_Certification.ppt |
| Document Creator | pdfFactory Pro www.pdffactory.com |
| Document Author: | mclee |
Bottom and Back Side Bottom Star-shaped screw hole for fixing a body to a metal bracket Back 3 pin connector – wiegand output 5 pin connector – power and RS485 4 pin connector – ethernet (TCP/IP) 7 pin connector – digital input and relay output DIP switch – RS485 termination setting (Refer to “RS485 Connection” pages for details) 11 ⒸCopyright 2007 Suprema Inc. Product Dimension 50 160 160 Front 40 37 150 Side 135 Metal Bracket (unit : mm) 12 ⒸCopyright 2007 Suprema Inc. Cables and Connectors Power and RS485 TCP/IP PIN PIN DESCRIPTION POWER +12V POWER GND RS -485 GND RS -485 TRX+ RS -485 TRX- WIRE RED BLACK GRAY BLUE YELLOW PIN PIN DESCRIPTION WIRE RJ45 PIN TX + TX RX + RX - YELLOW GREEN RED BLACK Wiegand output PIN PIN DESCRIPTION WIEGAND DATA0 WIEGAND DATA1 WIEGAND GND WIRE GREEN WHITE BLACK PIN PIN DESCRIPTION SW1 INPUT SW1 GND SW2 INPUT SW2 GND RELAY NORMAL CLOSE RELAY COMMON RELAY NORMAL OPEN WIRE YELLOW BLACK GREEN BLACK ORANGE BLUE WHITE Digital Inputs and Relay output 13 ⒸCopyright 2007 Suprema Inc. Installation of Wall-mount Bracket Fix wall mount bracket on a wall using wall mounting screws Hook BioEntry Plus on the wall mount bracket Wall mounting screws Fix BioStation and wall mounting bracket using a star shape screw. Star-shaped screw Star-shaped wrench 14 ⒸCopyright 2007 Suprema Inc. Power Connection Recommended power supply l 12V ± 10%, at least 1500mA. l Comply with standard IEC/EN 60950-1. l To share the power with other devices, use a power supply with higher current ratings. 15 ⒸCopyright 2007 Suprema Inc. Ethernet Connection 16 ⒸCopyright 2007 Suprema Inc. Ethernet Connection (Direct connection with PC) To connect BioEntry Plus with a PC directly, connect both devices with a straight CAT-5 cable. As the BioEntry Plus supports auto MDI/MDIX feature, it is not necessary to use a crossover type cable. 17 ⒸCopyright 2007 Suprema Inc. RS485 Connection for Host Communication 18 ⒸCopyright 2007 Suprema Inc. RS485 Connection for Secure I/O Max number of devices l Maximum numbers of devices in an RS485 loop are two(2) devices (BioStation or BioEntry Plus) and four(4) Secure I/Os 19 ⒸCopyright 2007 Suprema Inc. Relay Connection – Fail safe lock 20 ⒸCopyright 2007 Suprema Inc. Relay Connection – Fail secure lock 21 ⒸCopyright 2007 Suprema Inc. Relay Connection - Automatic door 22 ⒸCopyright 2007 Suprema Inc. Digital Input Connection (RTE, Door sensor) 23 ⒸCopyright 2007 Suprema Inc. Digital Input Connection (Alarm, Emergency sw) 24 ⒸCopyright 2007 Suprema Inc. Wiegand Output 25 ⒸCopyright 2007 Suprema Inc. Installation Reference 1 - Stand alone Door Sensor Door Lock Exit Button BioEntry Plus LAN PC Enroll Scanner 26 ⒸCopyright 2007 Suprema Inc. Installation Reference 2 – Secure RS485 Door Sensor Door Lock Exit Button Secure I/O BioEntry Plus LAN PC Enroll Scanner 27 ⒸCopyright 2007 Suprema Inc. Installation Reference 3 – Network Door Zone 1 (Anti passback) RS485 BioStation RS485 BioEntry Plus BioEntry Plus Secure I/O LAN PC Server Enroll Scanner PC Client BioStation Secure I/O BioEntry Plus Exit Button RS485 Door Zone 2 (Anti passback) PC Client 28 ⒸCopyright 2007 Suprema Inc. Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 Use regulated DC power adaptor only Power Voltage (V) Current (mA) 250 Switch Input VIH (V) TBD VIL (V) TBD Pull-up resistance (Ω) 4.7k VOH (V) VOL (V) 0.8 Pull-up resistance (Ω) 4.7k Switching capacity (A) 0.3 Switching power (resistive) 30W 37.5VA DC AC Switching voltage (V) 110 125 DC AC The input ports are pulled up with 4.7k resistors TTL/Wiegand Output The outputs ports are open drain type, pulled up with 4.7k resistors internally Relay 30V DC 125V AC 29 ⒸCopyright 2007 Suprema Inc. Troubleshooting Fingerprint can not be read well or it takes too long. Fingerprint is entered but authorization keeps failing. Check whether the user is restricted by door zone or time zone. Inquire of administrator whether the enrolled fingerprint has been deleted frin the device for some reason. Authorized but door is not opened. Check whether a finger or fingerprint sensor is stained with sweat, water, or dust Retry after wiping off finger and fingerprint sensor with dry towel. If a fingerprint is way too dry, blow on the finger and retry. Check whether the time is set as lock time. Check whether an antipass back mode is in use. In antipass back mode, only who entered can exit. Device doesn’t operate though power is connected. Check whether a device and a bracket is well connected to each other. If not, a tamper switch is activated and the device doesn’t work. 30 ⒸCopyright 2007 Suprema Inc. Device cleaning Wipe out machine surface with dry towel or cloth. In case there is dust or impurities on the sensor of the BioStation, wipe off the surface with dry towel. Note that if the sensor is cleaned by detergent, benzene or thinner, surface is damaged and fingerprint can’t be entered. 31 ⒸCopyright 2007 Suprema Inc. FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. 2. 3. 4. Reorient / Relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help 32 ⒸCopyright 2007 Suprema Inc. Suprema Inc. 16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 Korea E-mail : support@supremainc.com Website : www.supremainc.com Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 23 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:2ee26a1d-bd16-4a2a-a43e-7d6c0835f2ef Modify Date : 2008:05:28 17:49:13+09:00 Create Date : 2008:05:28 17:49:07+09:00 Metadata Date : 2008:05:28 17:49:13+09:00 Document ID : uuid:5f99b3f5-6610-4880-996a-d90cea92cb68 Format : application/pdf Title : BEPlus_InstallationGuide_V1.0_English_Certification.ppt Creator : pdfFactory Pro www.pdffactory.com Author : mclee Producer : pdfFactory Pro 3.17 (Windows XP Professional Korean)EXIF Metadata provided by EXIF.tools