Suprema BIOSTATIONMFOC FINGERPRINT SYSTEM User Manual

Suprema Inc. FINGERPRINT SYSTEM

User manual

Innovative Fingerprint TerminalUser Guide (Ver 1.4)www.supremainc.com
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment  WAR NING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  INFORMATION TO USER: This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1.  Reorient / Relocate the receiving antenna. 2.  Increase the separation between the equipment and receiver. 3.  Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4.  Consult the dealer or an experienced radio/TV technician for help
2ⒸCopyright 2006 Suprema Inc.Innovative Fingerprint Terminal for Access Control and Time Attendance nFingerprint recognition, now look and feel!lFeatures 2.5" 16M color LCD to display multimedia contents including animation and photos. nInvincible speed and capacitylDelivers fingerprint identification speed to perform 3,000 matches in 1 second and internal memory storing up to 50,000 fingerprints and 500,000 event logs. nNo more wiring!lProvides various external interfaces including Wi-Fi wireless LAN for easy access to the internal user info and event log from a remote PC. (Optional)nData into your USB drivelUsing USB memory, copies and backs up user info and event log data very easily. nWorld’s best fingerprint recognition algorithmlWorld’s most reliable fingerprint solution that ranked No. 1 in an international fingerprint algorithm contest (FVC2004 & FVC2006) with the lowest error rate. nVarious fingerprint sensorslSupports various fingerprint sensors, including optical, capacitive, and thermal swipe, so users can choose the most suitable fingerprint sensor for their application.nRF Card Support!lRF module is built in a Terminal itself. Fingerprint, card, and password can be selected as the authentication method for each user. nReal Time Network operation through Server!lConnected to the BioAdmin Server, terminals can be managed in real time.
3ⒸCopyright 2007Suprema Inc.ContentsBefore startlSafety precautions 5lGlossary 7lBasics of fingerprint recognition 8lHow to place a finger 9lProduct Contents 11lName of each part 13lInstallation 15lCable spec. 16For administrators (Basic functions)lEnter Admin menu 18lUsing Admin menu 19lOperation mode setting 20lNetwork setup–TCP/IP 23–Wireless LAN 24–Server 25–USB 27lUser management–Enroll New User 28–Check User Info 32–Edit User Info 33–Delete User 34–Delete All Users 35–Check User DB  36
4ⒸCopyright 2007Suprema Inc.ContentsFor Administrators (Advanced functions)lDisplay & sound setting 38lDevice setup–Fingerprint Setting 40–I/O Setting 43–Door Relay Setting 45–Zone 48–Sub Zone 49–APB Zone 50–Change Master Password 51–View Device Info 52–Device Reset 53–Factory Default 54lLog –Check log  55–Filter log 56–Delete entire log 57lUSB memory 58For General UserslOpen door–Access using 1:N mode 61–Access using 1:1 mode 62lUsing T&A event–T&A event using 1:N mode 64–T&A event using 1:1 mode 65–Using extended T&A events 66lView user’s Access/T&A event records 67lAuthentication procedure as per operation mode 68lAuthentication procedure for T&A event  69AppendixlSpecifications 70lTroubleshooting 71lDevice cleaning 72
5ⒸCopyright 2006 Suprema Inc.Safety precautionsnThe list below is to keep user’s safety and prevent any loss. Please read carefully before use.Do not install the device in a place subject to direct sun light, humidity, dust or soot.Do not place a magnet near the product. Magnetic objects such as magnet, CRT, TV, monitor or speaker may damage the device.Do not place the device next to heating equipments.Be careful not to let liquid like water, drinks or chemicals leak inside the device. Clean the device often to remove dust on it.In cleaning, do not splash water on the device but wipe it out with smooth cloth or towel. Before Start
6ⒸCopyright 2006 Suprema Inc.Safety precautionsnThe list below is to keep user’s safety and prevent any loss. Please read carefully before use.Do not drop or damage the device. Do not press two buttons at the same time.Do not disassemble, repair oralter the device.Do not let children touch the devicewithout supervision.Do not use the device for any other purpose than specified.Contact your nearest dealer in case of a trouble or problem. Before Start
7ⒸCopyright 2006 Suprema Inc.GlossarynAdministratorlA special user who are authorized to manage the settings and user information of a device. Administrators can enroll or delete users and change settings ofthe device. n1:1 ModelIn 1:1 mode, a user should enter his/her user ID first. After then, the user is requested to place a finger or enter a PIN. In this mode, user’s scanned fingerprint is matched against only one fingerprint specified by the user ID.n1:N ModelIn 1:N mode, a user places his/her finger without entering any ID. Then the device compares the user’s scanned fingerprint with the whole enrolled fingerprints in its internal database.nFingerprint EnrollmentlA process of extracting features of a fingerprint image obtainedfrom a fingerprint sensor and saving them into the internal memory of a device. The fingerprint data is called a fingerprint template. Before Start
8ⒸCopyright 2006 Suprema Inc.Basics of fingerprint recognitionnWhat is fingerprint recognition?lFingerprint is an individual’s own biometric information and does not change throughout his/her life. Fingerprint recognition is a technology that verifies or identifies an individual using such fingerprint information.lFree from the risk of theft or loss, fingerprint recognition technology is being widely used in security systems replacing PIN or cards. nProcess of fingerprint recognitionlFingerprint consists of ridges and valleys. Ridge is a flow of protruding skin in a fingerprint while valley is a hollow between two ridges. Each individual has different pattern of ridges and valleys and finger recognition makes use of such originality and uniqueness of these patterns.lFingerprint sensor generates 2-dimentional fingerprint image using different technology. According to the sensing technology, fingerprint sensors are classified into optical, capacitive, or thermal. lFingerprint template is a collection of numeric data representing the features of a fingerprint. Fingerprint templates are saved inside the memory of BioStation and used for identification. nSecure way to protect personal information lTo avoid privacy concern, Suprema’s fingerprint products do not save fingerprint images itself. Itis impossible to reconstruct a fingerprint image from a fingerprinttemplate which is just numeric data of the features of a fingerprint. Before Start
9ⒸCopyright 2006 Suprema Inc.How to place a fingernSelect a finger to enrolllIt is recommended to use an index finger or a middle finger. lThumb, ring or little finger is relatively more difficult to place in a correct position.nHow to place a finger on a sensorlPlace a finger such that it completely covers the sensor area with maximum contact. lPlace core part of a fingerprint to the center of a sensor.§People tend to place upper part of a finger.§The core of a fingerprint is a center where the spiral of ridgesis dense. §Usually core of fingerprint is the opposite side of the lower part of a nail. §Place a finger such that the bottom end of a nail is located at the center of a sensor.lIf a finger is placed as in the right picture, only a small areaof a finger is captured. So it is recommended to place a finger as shown in the left picture. Suprema’s fingerprint products show an outstanding recognition performance regardless of the user’s fingerprint skin condition or the way of fingerprint positioning. However, following tips are recommended to get more optimal fingerprint recognition performance.Before Start
10ⒸCopyright 2006 Suprema Inc.How to place a fingernTips for different fingerprint conditionslSuprema’s fingerprint products are designed to scan fingerprint smoothlyregardless of the conditions of a finger skin. However, in case a fingerprint is not read well on the sensor, please refer to the followings tips. §If a finger is stained with sweat or water, scan after wiping moisture off.§If a finger is covered with dust or impurities, scan after wiping them off.§If a finger is way too dry, place after blowing warm breath on the finger tip.nTips for fingerprint enrollmentlIn fingerprint recognition, enrollment process is very important. When enrolling a fingerprint, please try to place a finger correctly with care. lIn case of low acceptance ratio, the following actions are recommended.§Delete the enrolled fingerprint and re-enroll the finger.§Enroll the same fingerprint additionally.§Try another finger if a finger is not easy to enroll due to scaror worn-out.lFor the case when an enrolled fingerprint cannot be used due to injury or holding a baggage, it is recommended to enroll more than two fingers per user. Before Start
11ⒸCopyright 2006 Suprema Inc.Product ContentsnBasic ContentsProduct ContentsBioStation fingerprint terminal Wall mounting metal bracketUSB cableWallmounting screwsand holders-3 ea Star-shape screw for fixing main bodyStar-shape small wrench5pin, 3pin, 6pin, 4pin, 7pin cable –1 ea Software CDBefore Start
12ⒸCopyright 2006 Suprema Inc.Product ContentsnOptional accessoriesPlastic stand type B USB fingerprint scanner for enrollmenton PC12V power adaptor Plastic stand type ABefore StartInterphoneUSB memory Wireless LAN Access PointlRecommended power supply 12V ±10%, at least 2500mA for BioStationalone installation. Comply with standard IEC/EN 60950-1(CE Certification) To share the power with other devices, use a power supply with higher current ratings.
13ⒸCopyright 2006 Suprema Inc.Name of each partnFrontMicrophoneUsed when connected to interphone.Color LCD Displays terminal status (T&A mode, notice, etc.) and current time. Navigation key▼: Move down in Admin menu or view detailed T&A function key▲: Move up in Admin menu or hide detailed T&A function key►: Show the next setting value in Admin menu or input a dot (.) when entering IP address◄: Show the previous setting value in Admin menu or delete a numeric when entering user ID or PINOK : Confirm the selected setting or initiate a fingerprint scanning manually.LED Blue LED is turned on with power supplied and flickers when waiting for fingerprint scanning. SpeakerOutputs various sound effects, music, and voices.Fingerprint sensorPlace a finger here to scan fingerprint.Numeric key 0~9Used to enter user ID or PIN.Function keyUsed to input a T&A event and initiate fingerprint scanning.ESC keyUsed to enter Admin menu from initial display or return to the previous menu from Admin menu. CALL keyWhen connected to interphone, press this button to ring the interphone.RF card reading part (RF model only)Place RF card here to readBefore Start
14ⒸCopyright 2006 Suprema Inc.Name of each partnBottomnRearSlot for USB memory device : USB type ASlot for PC USB connection : Mini USBEthernet cable connector : RJ453pin cable connector -Door6pin cable connector –Input/Output or Wiegand4pin cable connector -RS4857pin cable connector -RS232 or BEACon5pin cable connector –Power and doorphone12V power adaptorBefore Start
15ⒸCopyright 2006 Suprema Inc.InstallationnInstallation examplenRCT Battery ReplaceCAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACE BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Recommend Battery Type : CR2032 Type lithium Ion Battery Exit ButtonDoor LockPCNetwork hub6pin cable3pin cable7pin cableEthernetUSBUSBRS232Before Start
16ⒸCopyright 2006 Suprema Inc.Cable spec.GRAYSHIELD GND5BLUEDoorphoneData4ORANGEDoorphoneAudio3BLACKPOWER -2REDPOWER + (12Vdc)1WIREPIN DESCRIPTIONPINPower & DoorphoneRelayTTL I/Oor WiegandRS485RS232ORANGENORMAL CLOSE3BLUECOMMON2WHITENORMAL OPEN1WIREPIN DESCRIPTIONPINBLACKGND5GRAYSHIELD GND6WHITETTL OUT14GREENTTL OUT03YELLOWTTL IN12BLUETTL IN01WIREPIN DESCRIPTIONPINGRAYSHIELD GND4BLACKGND3BLUETRX +2YELLOWTRX -1WIREPIN DESCRIPTIONPINGRAYSHIELD GND7WHITETTL OUT14YELLOWRS-232 RX3BLUERS-232 TX2BLACKGND1WIREPIN DESCRIPTIONPINBefore Start
17ⒸCopyright 2007Suprema Inc.For Administrators -Basic FunctionsBasic information for the device administrators. It includes key items such as basic menu usage, operation mode setting, network connection, and user management.
18ⒸCopyright 2006 Suprema Inc.Enter Admin MenunPress ESC key to enter Admin menu from the initial display.nEnter master password and press OK key.l[Note] As there’s no master password enrolled in a device by factory default, you can enter Admin menu just by pressing OK key. For security reason, set a master password right after the product installation. Please refer to <Change master PW> to see how to set a master password.nInstead of entering master password, administrator can place his/her finger to enter Admin menu. l[Note] “Master password”is a unique password of the device, different from the PIN (user password) of an administrator. It is necessary to enter master PW or place a finger. It is not possible to enter Admin menu by entering his/her PIN.nIf the master password is entered successfully, initial Admin menu appears on display.▼T&AAdmin fingerprint or master passwordOK ESCDeviceUserModeDisplayLogNetworkFor Administrators -Basic Functions
19ⒸCopyright 2006 Suprema Inc.Using Admin MenunMain functions of initial Admin menu are as follows. For the entire Admin menu list, refer to <List of Admin menu>.lUser : user management such as user enroll/delete/edit.lMode : set device’s operating mode and different settingslDisplay : set device’s language, background, sound volume, etc.lLog : check the access and attendance event records.lDevice: set various settings for finger scan, I/O ports, door relay, etc.lNetwork : set interface such as TCP/IP, RS232, RS485, USB, Secure I/O, etc.nTo enter a desired submenu from initial Admin menu, move to the desired menu using a navigation key and press OK key. nIn a submenu, you can move to desired item using up/down navigation key. To change settings of each item, use left/right navigation key. lIf you press OK key, changed setting is applied and move to the previous menu. If you press ESC key, changed setting is not applied and move to the previous menu. nPress F4 key anytime in Admin menu to exit from Admin menu and move to initial display.l[Note] For security reasons, the display will automatically return to the initial display after a certain time period without any key input in Admin menu. If you do not want this function or want to change the time period, refer to <Display and sound setting>.For Administrators -Basic Functions
20ⒸCopyright 2006 Suprema Inc.Operation mode settingnIf  you select Mode on initial Admin menu, following menus appear on the display.After installation, it is necessary to select  an operation modesuitable for its usage. lSetting : Finger or PIN / Finger Only / Pin Only / Card OnlylAfter entering ID on 1:1 mode, set whether you will use fingerprint, PIN, or either for authentication. In case of card, using card onlyenables users to access just by placing the card.lSet schedules to apply the above 1:1 mode.lSelect “All Time”, “No Time”or a specific schedule set by BioAdminprogramlSetting: Auto / OK/T&A Key / DisabledlAuto : Fingerprint sensor is always on standby. So, if a finger is placed, identification starts automatically. lOK/T&A key : After pressing OK key or T&A function key, fingerprint sensor is turned on to scan a fingerprint.  lDisabled : 1:N identification is not used. In order to enhance the security level of your system, you can use 1:1 mode in which users should enter their ID first. lSet schedules to apply the above 1:N modelSelect “All Time”, “No Time”or a specific schedule set by BioAdminprogram1:1 Mode1:1 TimeFor Administrators -Basic FunctionsMode◀Finger or PIN ▶1:1 Mode1:1 Time1:N Mode1:N TimeDualDual TimeT&A◀All Time    ▶◀Auto        ▶◀All Time    ▶◀Not Use     ▶◀All Time   ▶◀Auto        ▶F1 More1:N Mode1:N Time
21ⒸCopyright 2006 Suprema Inc.Operation mode settingAfter installation, it is necessary to select  an operation modesuitable for its usage. lDual Authentication needs consecutive authentications from two different users within 15 seconds for high securitylIf only the first user is authenticated, the device signals authentication success but does not activate a relay.lSet scheudlesto apply the above “Dual Authentication”mode.lSetting : Function key / Auto / Manual / FixedlFunction key :Press function key F1~F4 first to enter an T&A event before authentication. Pressing ▼key on initial display, user can enter extended T&A events. lAuto : Apply T&A events set by time schedules•Press F1 and F2 to change settings•Choose a specific event by changing “T&A Key”and select a time schedule to apply the event. (Time schedules should be downloaded to the device using BioAdminin advance.)lManual : Keep the T&A event of the last pressed function key. Ifone press F1(IN) and authenticate, the next ones do not need to press F1 again but still the events are recorded as F1(IN) event.lFixed : Keep the selected T&A event (function key).•Press F1 and F2 to change settings•Choose a functioinkey to fix in “Fixed”menu DualDual TimeT&AFor Administrators -Basic FunctionsMode◀Finger or PIN ▶1:1 Mode1:1 Time1:N Mode1:N TimeDualDual TimeT&A◀All Time    ▶◀Auto        ▶◀All Time    ▶◀Not Use     ▶◀All Time   ▶◀Auto        ▶F1 MoreMode◀Finger or PIN ▶1:1 Mode1:1 Time1:N Mode1:N TimeDualDual TimeT&A◀All Time    ▶◀Auto        ▶◀All Time    ▶◀Not Use     ▶◀All Time   ▶◀Auto        ▶F1 MoreOK ApplyF2 T&AF3 EntranceT&A◀F1         ▶FixedT&A KeyApply Time◀F1         ▶◀All Time    ▶InDoor Relay
22ⒸCopyright 2006 Suprema Inc.Operation mode settingAfter installation, it is necessary to select  an operation modesuitable for its usage. lPress F1 and F3 to enter “Entrance Limit”windowlInterval : Time period for re-authentication (min)lTime Index : Select 4 different time periods per day•Time : Set time period•Count : Set max number of entrance during the periodlDefault : Set default entrance mode for users who are not assigned a specific access group. Entrance LimitFor Administrators -Basic FunctionsMode◀Finger or PIN ▶1:1 Mode1:1 Time1:N Mode1:N TimeDualDual TimeT&A◀All Time    ▶◀Auto        ▶◀All Time    ▶◀Not Use     ▶◀All Time   ▶◀Auto        ▶F1 MoreOK ApplyF2 T&AF3 EntranceEntrance Limit0IntervalTimeIndexTimeCountDefault Group◀0           ▶00:00 ~ 00:000◀Full Access  ▶
23ⒸCopyright 2006 Suprema Inc.TCP/IPnIf you select Network on initial Admin menu, Network Setup menus appear on the display. nIf you select TCP/IP on network menu, following menus appear on the display. To use the device connected to PC, you need to set up the network according to your connection type. Network SetupUSB MemoryTCP/IPSerialUSBLAN TypelSetting : Disable/Ethernet/Wireless LAN (Optional)lUsed when connected to PC via Ethernet using RJ45 connector on the rear of the device. lSetting : 1/4/8/16lMax number of BioAdminclients that can access the device at the same time.lSetting : Use/not use.lIt sets Use or Not Use of SSL between the BioAdmin and BioStation.lSetting : Use/not uselUsing DHCP, you can receive IP address and other necessary setting from server automatically. lCheck whether an appropriate DHCP server is available in your network environment before use. lWithout using DHCP, IP address, gateway, and subnet need to be entered manually. Inquire necessary settings to network administrator. Max connDHCPIP Address, gateway, subnetFor Administrators -Basic FunctionsSSLTCP/IP◁Ethernet    ▷LAN TypePortMax Conn.SSLDHCPIP AddressGatewaySubnet1470◀1           ▶◀Not Use     ▶◀Use        ▶F1 More
24ⒸCopyright 2006 Suprema Inc.Wireless LANnIf you press F2 key on TCP/IP menu, following menus appear on the display. To set up the wireless LAN, select the wireless LAN AP. PresetlSelect a wireless LAN AP among the preset AP devices. lIf there is no preset wireless LAN AP, add the wireless LAN AP using BioAdmin program on PC. You can add up to 4 wireless LAN AP.lShows the operation mode of the wireless LAN AP.lShows the ESSID of the wireless LAN AP.lShows the authentication mode of wireless LAN AP.lShows the encryption method of the wireless LAN AP.lShows the network condition of the currently used wireless LAN AP. ModeAuthenticationFor Administrators -Basic FunctionsWireless LAN◁WPA       ▷PresetModeESSIDAuthenticationEncryptionLink QualityInfrastructureBioStation_wepOpenWEP64/128/2560%ESSIDEncryptionLink Quality
25ⒸCopyright 2006 Suprema Inc.ServernIf you press F3key on Server menu, following menus appear on the display. To set up the network to the Server. Server lSet Use or Not use of server.lSet Server IPlSet Server portServer IPFor Administrators -Basic FunctionsServer◁Not Use     ▷ServerServer IPPortPortlSet SSL   Mode as  “Not Use”and  Server mode to “Use”(Put server IP and Port  information) if sever access is executed for the first time and another server DB rather than previously is accessed.lAfter the previous process, BioStation with unauthorized certificate in BioAdmin client program will be shown and issuing certificate is needed.lAfter issuing certificate, system will be rebooted and accessed to server automatically.lAfter rebooting, SSL mode will be automatically change to “USE”, lAfter issuing certificate, SSL Mode and server mode will be set to “USE”and  there is no need to set up configurations of server and BioStation.lTo access BioStation from BioAdminClient directly without accessing to server, SSL and server mode are set on “Not Use”lFor more information on server setup, please refer to BioAdmin manual.
26ⒸCopyright 2006 Suprema Inc.SerialRS485 lSetting :Disable/9600/19200/38400/57600/115200lUsed when connecting to the serial port of PC using 7pin connector on the rear of the device.lIn the serial communication, the speed represents the frequency of carrier wave’s changing status per sec, called baudrate. lDefault is 115200 bps.lIf you have communication error in serial communication, settinga lower baudrate may solve the problem. lPC Connect : Use RS485 to communicate with PC hostlSecure I/O : Use RS485 for internal communication between door access devices like BioStation and Secure I/O for secure relay or anti-passbacklSetting : Disabled/9600/19200/38400/57600/115200lUsed when connecting to the serial port of PC using 4pin connector on the rear of the device. lPress F1 to enter Secure I/O settinglValid only when “RS485Mode”is selected as “Secure I/O”.•Node Type : Host / Slave (Check whether the device is a host in the RS485 loop.)•Slave ID : Enter ID of slave device (BioStation or BioEntry Plus) in the same RS485 loop •SecureIOID : Enter ID of the connected Secure I/O (0 ~ 3) and set “Use”in the below menuSerial◀115200     ▶RS485RS485MODERS232For Administrators -Basic Functions◀Secure I/O   ▶RS232To connect BioStation  to the serial port of PC, you need to select the buadrate of the serial communication.F1 Secure I/O◀115200     ▶Secure I/O◀Host        ▶Node TypeSlave IDSecureIO IDSecureIO Use0◀0           ▶◀Not Use     ▶RS485ModeSecure I/O
27ⒸCopyright 2006 Suprema Inc.USBnIf you select USB on network submenu, USB setting menu appears on the display. USB lSetting : Enable/DisablelUsed to connect the mini USB port on the bottom of the device tothe USB port of PC.l[Note] For security reasons, USB is set as Disable by the factory default. When you connect device to PC using USB, the setting should be changed to Enable in advance. USB◁Disable     ▷USB PortFor Administrators -Basic FunctionsTo connect the BioStation to the USB port of host PC, enable theUSB communication.
28ⒸCopyright 2006 Suprema Inc.Enroll New UsernIf you select User on initial Admin menu, User Management menus appear on the display.  nIf you select Enroll User on user menu, following menus appear on the display. How to enroll the user information and fingerprint. User ManagementEnroll UserEdit UserDelete All UsersCheck User DBEnroll User123456User IDAdmin LevelPasswordGroup 1Group 2Group 3Group 4◀Normal     ▶◀None      ▶◀None      ▶◀None      ▶◀None      ▶User IDlBy default, the lowest available ID is displayed on the ID part of the menu. Enter your desired ID. lUser ID can be set between 1 and 4,294,967,295.lSetting : Normal/AdminlDecide user level as normal user or administrator. lAdministrator is authorized to manage user info, ie. enroll user, delete user, and change various settings of the device. lIt is recommended to enroll at least 1 or 2 users as administrator. lEnter password used in 1:1 mode. If you want to use fingerprint only, leave password as blank.lSelect access group in which the user belongs to. To edit accessgroup, use BioAdmin program on PC. Default access group can be set as “Full Access”or “No Access”for whom without a specific access group assigned.Admin LevelPasswordGroup 1 ~ Group 4For Administrators -Basic Functions
29ⒸCopyright 2006 Suprema Inc.Enroll New UsernIf you enter all the necessary items for enrollment and press OKkey, the following fingerprint menus appear on the display.Finger No lSetting : 1/…/5/Nonel1-5 fingers can be enrolled for each ID.lEnrolling more than two fingers per user can be useful in a caseof injury of a finger.lFor a user whose fingerprint is weak or worn-out, enrolling the same finger twice or more can reduce failure rate. lIf you want to use PIN only instead of fingerprint, select None.lSetting : None/Last FingerlDuress is of vital importance in a situation when user is threatened to open a door by an intruder. If a duress finger is entered, a door opens normally but the device can send a duress signal to ring an emergency call or alarm. lIf you select Last Finger on the duress menu, the last fingerprint enrolled is assigned as a duress finger. For example, if you enroll three fingers and select Last Finger for duress, the first and second fingers are enrolled as normal fingers and the third finger as aduress finger. lTo use duress finger, more than two fingerprints should be enrolled, ie., Finger No. should be more than 2.lDuress finger should be different from normal finger enrolled inadvance. DuressFor Administrators -Basic FunctionsEnroll Finger◁None       ▶Finger NoDuressDaily LimitTime LimitCardBypass CardInput TypeCard ID◀None       ▶00◀Wiegand    ▶◀Use        ▶◀Read Card ID▶Card ID display change (from V1.3)Since firmware V1.3, card ID display type has been changed. So, cards registered before V1.3 may show a different ID display. But it doesn’t affect card authenication.
30ⒸCopyright 2006 Suprema Inc.Enroll New UsernIf you enter all the necessary items for enrollment and press OKkey, the following fingerprint menus appear on the display.Daily Limit lIt sets the limit to the number of access for a user in a day.If this is set as 0, user can access many times without limit.lIt sets the minimum interval between the accesses of a user.If it is set as 0, there will be no minimum interval between theaccesses for that user. lSetting : Not Use/RF Card/WiegandlIt sets Use or Not use of card and the type of card.lSetting : Use/Not UselIt sets authentication with card only, not with any additional procedure.lSetting : Direct Input/Use ID/Read Card ID.lIt sets Card ID Input type.lIn case of Manual Input, users enter card ID directly. In case of User ID, users set card ID as user ID. In case of Read Card ID, it will be read from card.Time LimitFor Administrators -Basic FunctionsEnroll Finger◁None       ▶Finger NoDuressDaily LimitTime LimitCardBypass CardInput TypeCard ID◀None       ▶00◀Wiegand    ▶◀Use        ▶◀Read Card ID▶CardBypass CardInput TypeCard ID
31ⒸCopyright 2006 Suprema Inc.Enroll New UsernAfter selecting Finger No. and Duress and pressing OK, now you should place a finger on a sensor for enrollment.lFor enrollment, the same finger should be placed twice accordingto the messages shown in the display. lIf Finger No. is set more than 2, the device asks for the scan of the next fingerprint continously.lAfter placing a finger on a sensor, user can see the captured fingerprint image on the display. If you do not want to display fingerprint images ondisplay, you can change settings at “Device –Fingerprint –View Image”menu.lIf the two fingerprints are different from each other, enrollment process stops with a message “Two fingerprints do not match”.lIf duress finger is same as normal finger enrolled beforehand, enrollment process also stops with a message “Duress not allowed for the same finger”. nPlease place a finger correctly referring to <How to place a finger>.nIf all the fingerprints are entered correctly, Enroll Success message appears on the display together with a user ID and the fingerprint enrollment process is completed. nAfter enrolling fingerprints of one user, the display shows the next user ID to enroll the next user. If you do not want to enroll more users, press F4 to exit to initial display.Enroll FingerFinger 1Place the First FingerEnroll FingerEnroll Success123456For Administrators -Basic Functions
32ⒸCopyright 2006 Suprema Inc.Check User InfonIf you select Edit User on User Management menu, user info of each users are displayed. nYou can change user ID using a left/right navigation key. nIf you enter user ID with the numeric key, you can directly moveto the user info the entered user ID. lIf there is no user with the selected ID, “None”message is indicated on the Name field of the display. In that case, if you press  left/right navigation key, you can go to the closest valid user ID.nAdditional info such as user name, department and company name can be entered using BioAdmin software on PC.nIf you press F1 key, active function keys at this menu are displayed, OK, F2 and F3. Check user info of currently enrolled users.Edit User◀123456    ▶User IDNameDept.Admin LevelPasswordNo of FingerGroup 1AdminRegistered2NoneF1 MoreEdit User123456User IDNameDept.Admin LevelPasswordNo of FingerGroup 1AdminRegistered2NoneOK Edit UserF2 FingerF3 DeleteF1 MoreFor Administrators -Basic Functions
33ⒸCopyright 2006 Suprema Inc.Edit User InfonIf you press OK key at Edit User menu, the selected user info isdisplayed and can be edited in the same way as in the Enroll User process. You can change admin level, password and groups.nIf you want to re-enroll fingerprints of the user, press F2 key at Edit User menu. nYou can select the number of fingerprints and duress and then re-enroll fingerprints.User info can be changed and fingerprints can be re-enrolled. Enroll Finger2Finger NoDuress ◀Last Finger  ▶Edit User : 123456◁Normal      ▷Admin LevelPasswordGroup 1Group 2Group 3Group 4*******◀None      ▶◀None      ▶◀None      ▶◀None      ▶For Administrators -Basic Functions
34ⒸCopyright 2006 Suprema Inc.Delete UsernIf you want to delete the user, press F3 key at Edit User menu. nPress OK key to confirm the deletion of the user.l[Note] Deleted user info can’t be retrieved unless the info remains in BioAdmin software on PC. Delete user from device while checking currently enrolled user info.Edit UserDo you want to delete this user?OK ESCF1 MoreFor Administrators -Basic Functions
35ⒸCopyright 2006 Suprema Inc.Delete All UsersnBack to User Management menu, select Delete All User to delete all users in the device.nPress OK key to confirm the deletion of all users.l[Note] Once all users are deleted, deleted user info cannot be retrieved unless the info remains in BioAdmin software on PC. l[Note] The data of administrators who is operating the menu is also deleted by this operation. Therefore, in order to enter Admin menu again, you should remember the master password before deleting all users.Delete all user currently enrolled in device. User ManagementDo you want to delete all users?OK ESCFor Administrators -Basic Functions
36ⒸCopyright 2006 Suprema Inc.Check User DB nIf you press Check User DB on User menu, following menus appear on the display. nPress OK key to check the user DB.lIf there is an error on the user DB, it will be automatically corrected by this procedure. If it fails to correct, an error message appear on display. Check and correct errors in the user information stored on device. User ManagementDo you want to check user DB errors?OK ESCFor Administrators -Basic Functions
37ⒸCopyright 2007Suprema Inc.For Administrators -Advanced FunctionsDetailed information for device administrators. It includes specific items such as display and sound setting, fingerprint authentication setting, and log check.
38ⒸCopyright 2006 Suprema Inc.Display & Sound SettingnIf you select Display on initial Amin menu, following menus willappear on the display. Change device’s display and sound settings.lSetting :Korean/English/CustomlSelect a language to be used lTo use custom language, appropriate language config. file needs to be downloaded to the device using BioAdmin program on PC. Please contact Suprema for details.lSetting : Logo/Slide Show/NoticelDecide background of initial display. In case of Logo, one photoassigned as logo is displayed all the time. In case of Slide Show, multiple photos are displayed at the interval of 5 seconds in turn. In case of Notice, one photo is displayed as a background and a notice is scrolled down over the background.lIn order to change background images, use BioAdmin program on PC.lSetting : Time/None lSub Info is a display area in the bottom side of the display. Current date and time will be shown with a selection of Time. Or the area can be left blank with the selection of None. lSetting : Infinite/10 sec/20 sec/30 seclIf there’s no key input during this time out period on Admin menu, the device automatically returns to initial display for securityreason. lSetting : 0.5sec/1sec/2sec/3sec/4sec/5seclIt sets message time in display upon the fingerprint matching.lSetting : 0%/10%/20%/…/100%lSet output volume of the device sounds. 100% is the maximum. At setting 0%, sound is turned off.LanguageBackgroundSub InfoTimeoutVolumeFor Administrators -Advanced FunctionsMsg TimeDisplay◁English      ▷LanguageBackgroundSub InfoTimeoutMsg TimeVolume◀Logo      ▶◀Time      ▶◀Infinite     ▶◀2 sec      ▶F1 Time20%
39ⒸCopyright 2006 Suprema Inc.Display & Sound SettingnIf you select Display on initial Amin menu, following menus willappear on the display. Change device’s display and sound settings.lDate : YYYYMMDDlTim : hhmmsslTime synchronization :  Terminal time will be synchronized with server time.lDate format : MM/DD or DD/MMTimeFor Administrators -Advanced FunctionsDisplay◁English      ▷LanguageBackgroundSub InfoTimeoutMsg TimeVolume◀Logo      ▶◀Time      ▶◀Infinite     ▶◀2 sec      ▶F1 Time20%
40ⒸCopyright 2006 Suprema Inc.Fingerprint SettingnIf you select Device on initial Admin menu, Device Setup menus appear on the display. Then select Fingerprint for setting related to fingerprint authentication.Change various settings for fingerprint authentication.lSetting : Normal/Secure/Most SecurelSecurity level is determined by FAR (False Acceptance Ratio). FAR refers to the percentage of acceptance by unregistered fingerprints. Therefore, the lower the percentage is, the higherthe security level is. However, as the FAR and FRR (False Reject Rate) are in reverse proportion to each other, the higher security level will indue bigger FRR, ie., more failure for registered fingers. lFor general T&A applications, normal level is recommended. However, in case of an access control application requiring a higher security level, it is recommended to apply the security level as secure or most secure. lSetting : Normal/Fast/FastestlUsing 1:N mode with more than hundreds of users, identification may take somewhat longer. In this case, you can change the fast mode to Fast or Fastest. By doing so, identification speed becomes faster in sacrifice of a little higher FRR. lSetting: Weak/Normal/StrictlQuality level decides the strictness of quality check of the input images. With a strict quality level, the device may reject a lowquality input fingerprint more.SecurityDevice SetupFingerprintI/ODoor RelayAccess ControlMaster PasswordDevice InfoDevice ResetFactory DefaultFor Administrators -Advanced FunctionsFingerprint◀Normal    ▶SecurityFast ModeQualityView ImageSensitivityTimeout(Sec)1:N DelayCheck Duplicate◀Auto      ▶◀Normal    ▶◀Visible    ▶◀7 (Max)   ▶◀10       ▶◀Not Use    ▶◀0        ▶F1 MoreFast ModeQuality
41ⒸCopyright 2006 Suprema Inc.Fingerprint SettingFor Administrators -Advanced FunctionsFingerprint◀Normal    ▶SecurityFast ModeQualityView ImageSensitivityTimeout(Sec)1:N DelayCheck Duplicate◀Auto      ▶◀Normal    ▶◀Visible    ▶◀7 (Max)   ▶◀10       ▶◀Not Use    ▶◀0        ▶F1 MorelSetting : Visible/InvisiblelProper enrollment can be induced by showing the image of the entered fingerprint on LCD screen upon enrollment. lSetting : 0(min)/1/2/3/4/5/6/7(max)lSet sensitivity of fingerprint sensor in a capture of a fingerprint. At a high sensitivity level, it is easier and faster to capture a fingerprint. On the other hand, at a low sensitivity level, the image qualityof the captured fingerprint can be more stable.  lIn normal applications, maximum level is recommended. If the recognition is not satisfactory for wet fingerprints, reducing sensitivity may solve the problem.lSetting : 1/2/…/10/…/19/20lSet standby time for fingerprint enrollment. If a user does not place a finger within the time, a timeout message appears on the display. lSetting : 0/1/2/…./10lIt means the time of delay from 1:N authentication to next stand-by authenticationlSetting : Not Check / ChecklIn enrollment, checks whether the fingerprint is duplicated or not.View ImageSensitivityTimeout(Sec)Duplicate1:N Delay
42ⒸCopyright 2006 Suprema Inc.Fingerprint SettingnPress F1 on Fingerprint menu to set detailed fingerprint options.Change detailed settings for fingerprint authentication.Match TimeoutFor Administrators -Advanced FunctionsFingerprint◀3        ▶Match TimeoutCalibrationEncryption Not UselSetting : 1/2/3/…/19/20lTimeout in 1:N identification. If the device cannot find a matched fingerprint in this period, it results in identification fail. This is to avoid too long waiting time in case of large enrollments.lFor TC sensor, this menu calibrates the sensor’s internal paramtersaccording to outer enviroment. Since sensor calibration is done in factory, it doesn’t need to do this usually except the case where sensors are replaced or sensitivity of the sensor is abnormal. lTo calibrate the sensor, select “Enable”and click OK button.lThis menu disappears for OC or FC model. lShows current device setting whether to encrypt fingerprint templates or not for security purpose.lThis menu only shows current setting and the settings can be changed only by BioAdminprogram on PC.◀Disable    ▶EncryptionCalibration
43ⒸCopyright 2006 Suprema Inc.I/O SettingnIf you select I/O on device menu and click Input, following menus appear on display.Change various settings for I/O.lSetting : Disabled/Exit/Wiegand User ID/Wiegand Card ID/Generic Input/Emergency Open/Alarm Off/Reset/Lock SystemlIn case of using the input port for RTE(exit button), select Exit.lIn case of using input as Wiegand User/Card ID, input 0 and input 1 are set as Wiegand User/Card ID. lGeneric Input : general input. Can be configured with output.lEmergency Open : All relays for doors are turned on for door openlAlarm Off : All relays are turned off to release alarmlReset : System resetlLock System : the device gets locked. Can be relasedwith master password only.lMinimum duration of input signal to decide validitylSet N/O (Normal Open) or N/C (Normal Close)lSetting : None/Lock System/Generic Input/Emergency Open/Alarm Off/ResetlTamper switch is turned on when a housing(case) of BioStation isopened. If the setting is in “Lock System”, the device is automatically locked when a tamper switch is on for security.l[Note] Once BioStation is locked, lock can be released only whenthe master password is entered. It cannot be released by administrator’s fingerprint.Input 0/1Input Type 0/1Duration 0/1(ms) Tamper S/WFor Administrators -Advanced FunctionsI/O◀Disable     ▶Input 0Duration0(ms)Input Type 0Input 1Duration1(ms)Input Type 1Tamper SW0◀N/O        ▶◀Disable     ▶0◀N/O        ▶◀None       ▶I/OInputOutput
44ⒸCopyright 2006 Suprema Inc.I/O SettingnIf you select I/O on device menu and click Output, following menus appear on display.Change various settings for I/O.lSetting: Disabled/Duress/Tamper SW/Auth Success/Auth Fail/Wiegand User ID/Wiegand Card IDlCan send outputs for various events.lIn case of using output as Wiegand User/Card ID, output 0 and output 1 are set as Wiegand User/Card ID. lSet the cycle of output signal. Default is 1sec (1000ms).Output 0/1Duration(ms) For Administrators -Advanced FunctionsI/O◀Disable     ▶Output 0Output 1Duration(ms)◀Disable     ▶1000
45ⒸCopyright 2006 Suprema Inc.Door Relay SettingnIn a simple standalone door control, internal relay of BioStation can be used to drive a door lock. For increased security, external device like Secure I/O or another BioStation can be installed inside of a room. Two devices are connected by RS485 and support a local anti-passbackfunctions. Up to 2 BioStationsand 4 Secure I/Os can be connected in a single RS485 loop. nIf you select Door Relay on device menu and select Door#, following menus appear on the display. Change various settings for door relay.lSelect which relay shall be usedlSetting: Internal Relay/Slave Relay/SIO# Relay#/Not UselSelect a device to be installed inside and outside.lSetting: Not Use/Device IDlSetting: All events / Authentication +T&A event/Authentication/T&A event/DisabledlIn case of All events, door opens for all authentication success(1:1 PIN auth.,1:1 fingerprint auth.,1:1 fingerprint verification)lIn case of authentication with T&A event, door opens only by thespecific events for which door use is allowed and also door opens only byauthentication.lIn case of authentication, door opens only by authentication without T&A event lIn case of selected T&A, door opens only by the specific eventsfor which door use is allowed.lIn case of disabled, BioStation will not drive an internal relayto open a door by any of events or authentication.lDuration of the relay activation (door open)RelayFor Administrators -Advanced FunctionsDuration (sec) Out/In DeviceI/ODoor 0Door 1APBInterphoneDriven byDoor0◀Internal Relay▶RelayOut DeviceIn DeviceDriven byDuration(sec)◀5503       ▶◀1208         ▶◀All Events   ▶3F1 More
46ⒸCopyright 2006 Suprema Inc.Door Relay SettingnIf you select F1 –F2(Input) on Door# setting menu, following menus appear on the display. nIf you select F1 –F3(Schedule) on Door# setting menu, following menus appear on the display. Change various settings for door relay.lSelect Request To Exit (Exit button) setting related to the relaylSetting: Not Use/Input#  (input port of the seleceteddevice)lSet N/O (Normal Open) or N/C (Normal Close)lSelect Door Sensor setting related to the relay (door)lSetting: Not Use/Input# (input port of the seleceteddevice)lSet N/O (Normal Open) or N/C (Normal Close)lWhen the door is open longer than this period(sec), door open alarm is activated. Specific output can be set by BioAdminprogram on PC. Default is 0 meaning no alarm. lDecide time to lock(close) the door by force. lDuring lock time, general users cannot open door while only administrators are allowed.lSpecific schedule for lock time can be set by BioAdmin program on PC.lDecide time to open the door by forcelSpecific schedule for unlock time can be set by BioAdmin programon PC.For Administrators -Advanced FunctionsRTE Lock timeUnlock timeDoor0Internal RelayRelayLock TimeUnlock Time◀No Time     ▶◀All Time    ▶Door0◀Internal Relay▶RelayReader0Reader1Driven byDuration(sec)◀Primary     ▶◀Secondary   ▶◀All Event    ▶3F1 MoreOK ApplyF2 InputF3 ScheduleInput TypeDoor Sensor Input TypeOpen AlarmDoor0Internal RelayRelayRTEInput TypeDoor SensorInput TypeOpen Alarm◀Not Use     ▶◀N/O        ▶◀Not Use      ▶0◀N/O        ▶
47ⒸCopyright 2006 Suprema Inc.Door Relay SettingnIf you select APB on Door Relay menu, following menus appear on the display. nIf you select Interphone on Door Relay menu, following menus appear on the display. Change various settings for door relay.lSelect anti-passbacksettinglSetting: Disable/Hard/SoftlIn “Hard”mode, relay does not work and log is recorded in case of anti-passbackevents. In “Soft”mode, log is recorded burelay works as usual. lDuration(min) of automatic reset of APB for each user. If it is set as 30(min), for example, APB record is erased for 30 minutes after each authentication of users. If 0, there is no automatic reset.lSetting : Disable / EnablelTo connect and use an optional interphone with BioStation, enable interphone on this menu. CALL button and interphone communication of BioStation will operate only when this menu is set as Enable. For Administrators -Advanced FunctionsAPB Type InterphoneReset TimeAPB0APB TypeRelease Time◀Hard        ▶InterphoneInterphone ◀Disable      ▶I/ODoor 0APBInterphone
48ⒸCopyright 2006 Suprema Inc.ZonenZone is a group of devices connected by TCP/IP and integrated together supporting data synchronizations, global anti-passbackand entrance limits. One of the devices should be assigned as a master in the zone. Master device collects and synchronize user and log information and makes a decision for anti-passbackand entrance limit control.nIf you select Access Control on device menu and select Zone, following menus appear on display. Change advanced access control settings-ZonelSetting : Standalone/Master/DevicelStandalone –works independently without zone conceptlMaster –a master device in the zonelDevice –the rest of the device in the zonelEnter IP of master device (only works when Node Type is Device)lOptions to enable synchronize user, log and time data among deviceslWhen Node Type is Master, enter IDs of the rest deviceslEnter ID of a device to add in “Device ID”. Then press F1 and press F2 (Add). lThen you can see the added device in “Device List”and the increased number of the total devices in “Device Count”lFor deleting, select the device in “Device List”and then press F1 and F3 (Delete).Node TypeUser/Log/Time SyncMaster IP Device ID/List/CountFor Administrators -Advanced FunctionsZoneZoneSub ZoneAPB ZoneEntrace Limit ZoneZone◀Standalone  ▶Node TypeMaster IPUser SyncLog SyncTime SyncDevice IDDevice ListDevice Count0.0.0.0◀Not Use     ▶◀Not Use     ▶◀Not Use     ▶◀ ▶0F1 MoreZone◀Standalone  ▶Node TypeMaster IPUser SyncLog SyncTime SyncDevice IDDevice ListDevice Count0.0.0.0◀Not Use     ▶◀Not Use     ▶◀Not Use     ▶◀ ▶0F1 MoreOK ApplyF2 AddF3 Delete
49ⒸCopyright 2006 Suprema Inc.Sub ZonenTo add anti-passbackor entrance limit functions, Sub Zone should be created in a Zone. nIf you select Access Control on device menu and select Sub Zone,following menus appear on display. Change advanced access control settings –Sub ZonelTo make a Sub Zone, the device should be a master (Node Type of Zone menu). If the device is a member but not a master, only “Device Auth”can be set in this menu.lSelect an ID of a sub zone (from 0 to 15)lSelect a sub zone type either “APB”or “Entrance Limit”.lSelect a “Device ID”of a device to add in a sub zone. Then press F1 and press F2 (Add). lThen you can see the added device in “Device List”and the increased number of the total devices in “Device Count”lFor deleting, select the device in “Device List”and then press F1 and F3 (Delete).lWhen the device is a member of a zone (Node Type of Zone is set as “Device”), Device Auth menu can be set to determine whether authentication decision is done by master or standalonelSetting: Standalone/Notify/DeferredlStandalone, Notify : decision made by device itself.lDeferred : Zone master decides the authentication result.    For APB and Entrance Limit, select this option.SubZoneIDZone TypeDevice ID/List/CountFor Administrators -Advanced FunctionsZoneZoneSub ZoneAPB ZoneEntrace Limit ZoneSub Zone◀0          ▶SubZone IDZone TypeDevice IDDevice ListDevice CountDevice Auth◀5225       ▶◀5225       ▶◀ ▶◀APB        ▶2F1 MoreSub Zone◀0          ▶SubZone IDZone TypeDevice IDDevice ListDevice CountDevice Auth◀5225       ▶◀5225       ▶◀ ▶◀APB        ▶2OK ApplyF2 AddF3 DeleteF1 MoreDevice Auth
50ⒸCopyright 2006 Suprema Inc.APB ZonenSelect APB Zone on Zone menunSelect Entrance Limit Zone on Zone menuChange advanced access control settings –APB ZonelSelect Sub Zone ID to make APB settinglSetting: Disable/Hard/SoftlIn “Hard”mode, relay does not work and log is recorded in case of anti-passbackevents. In “Soft”mode, log is recorded burelay works as usual. lDuration(min) of automatic reset of APB for each user. If it is set as 30(min), for example, APB record is erased for 30 minutes after each authentication of users. If 0, there is no automatic reset.lSelect a device for In and Out settinglSelect IN or OUT for anti-passbackfunction of the selected device. lOne who entered a room with authentication by IN devices must go out by OUT devices. lSelect Sub Zone ID to make APB settinglInterval : Time period for re-authentication (min)lTime Index : Select 4 different time periods per day•Time : Set time period•Count : Set max number of entrance during the periodFor Administrators -Advanced FunctionsSubZoneID Reset TimeZoneZoneSub ZoneAPB ZoneEntrace Limit ZoneAPB Zone◀0          ▶SubZone IDAPB TypeReset TimeDevice ListIN/OUT◀5225       ▶◀IN          ▶◀HARD       ▶0APB TypeDevice ListIN/OUTSubZoneID Time Index/Time/CountIntervalEntrance Limit Zone◀1          ▶SubZone IDIntervalTime IndexTimeCount◀0          ▶000:00~00:000
51ⒸCopyright 2006 Suprema Inc.Change Master PasswordnIf you select Master Password on device menu, Master Password menus appear on the display. nEnter current master password to “Current”and a new master password to “New”& “New (again)”. Then press OK key to confirm. lDefault password is blank (no need to type).  l[Note] With this master password, one can enroll or delete usersand change settings of BioStation. Please be careful not to disclose master password except Administrators. nWhen you forget master passwordlIf there is a user enrolled as administrator : you can enter Admin menu using administrator’s fingerprint and return the password as blank by selecting the Factory Default on Device menu. However, in this case, other settings of the device also return to defaults.lIf there’s no user enrolled as administrator : contact the dealer you purchased the device.Master PasswordCurrentNewNew(Again)Change master PW.For Administrators -Advanced Functions
52ⒸCopyright 2006 Suprema Inc.View Device InfonIf you select Device Info on device menu, following menus appear on the display.View device’s basic info such as model name and version.lModel name is displayed according to types of fingerprint sensor.lOptical sensor : BST-OClCapacitive sensor : BST-TClThermal swipe sensor : BST-FClDevice ID number is displayed.lDevice’s Ethernet MAC address is displayed.lDevice’s hardware version is displayed.lDevice’s firmware version is displayed.lFirmware and kernel can be upgraded using BioAdmin program when new firmware is released. lDevice’s Kernel ver. Info is displayed.lOverall available storage and currently used storage are displayed.lIn the internal memory of BioStation, various information like user info, log, background and sounds are stored, so used memory changes by the size of these information. ModelDevice IDHW VersionKernel Ver.MACFW VersionMemoryDevice InfoStandardModelDevice IDMACHW VersionFW VersionKernel Ver.Memory130100:17:fc:10:05:15Rev. E V1.07/19 MBFor Administrators -Advanced Functions
53ⒸCopyright 2006 Suprema Inc.Device ResetnIf you select Device Reset on device menu, a message to restart BioStation appears on the display.nPress OK key to reset device. Device reset takes normally 20-30 seconds and it may take a bit longer for network connection.nIf you change language of BioStation, you should reset BioStation to apply the new language. nIf device becomes unstable for any reason, in most of cases, device reset can solve the problem.Reset system.Device SetupDo you want to restart BioStation? OK ESCFor Administrators -Advanced Functions
54ⒸCopyright 2006 Suprema Inc.Factory DefaultnIf you select Factory Default on device menu, a message to reset to default appears on the display.nPress OK key to change system’s various settings as factory defaults.l[Note] Be sure that various settings, background, sounds and notice will be deleted.nUser info and log data are not deleted. To delete user info, refer to <Delete All Users>. To delete log data, refer to  <Delete Entire Log>.Restore device’s all settings to factory defaults. Device SetupDo you want to reset to default?OK ESCFor Administrators -Advanced Functions
55ⒸCopyright 2006 Suprema Inc.Check LognIf you select Log on initial Admin menu, log events appear on the display. You can check logs from the latest one.nPress up/down navigation key to scroll a log one by one.nPress left/right navigation key to scroll a log by page (8 logs).nPress F1 key to display available additional function key.lOK : LatestlF2 : FilterlF3 : DeletenPress OK key to display the latest log.Check logs for various events accumulated in device.Log List9/14 13:39 Duress (Menu) 1234569/14 13:30 Identify OK (Menu) 11119/14 13:25 Duress (Menu) 1234569/14 12:51 Identify OK (Menu) 11119/14 12:45 Duress (Menu) 1234569/14 12:43 Identify OK (Menu) 11119/14 12:39 Duress (Menu) 1234569/14 12:26 Identify OK (Menu) 1111F1 MoreFor Administrators -Advanced Functions
56ⒸCopyright 2006 Suprema Inc.Filter LognIf you press F2 key on Log menu, following menus appear on the display. Check specific log events by filtering the log events stored on device. For Administrators -Advanced FunctionslSelect the filter ID.lDevice can store up to 4 filters. lSetting : All/Today/Yesterday/Last 3 days/Last 1 week/Last 1 monthlDesignate the time to filter.lSetting : All/Success/Fail/IO/Duress/Tamper/SystemlSelect the events to be shown on the log list. lSelect the T&A events to be shown on the log list. lTo check the log events of a specific user, enter the user’s ID. If you press 0, log events of all users are displayed. Filter IDTimeT&A EventEventUserFilter◁1          ▷Filter IDTimeEventT&A EventUser◀All        ▶◀All        ▶◀All        ▶0
57ⒸCopyright 2006 Suprema Inc.Delete Entire LognIf you press F3 on log list screen, a message to delete all logsappears on the display.nPress OK key to delete all logs.l[Note] Be sure that a deleted log can not be retrieved unless itremains in BioAdmin program on PC. Delete entire event logs accumulated in device.For Administrators -Advanced FunctionsLog ListDo you want to delete all logs?OK ESCF1 More
58ⒸCopyright 2006 Suprema Inc.USB MemorynIf you select USB Memory on Network menu, following menus appear on the display. nWhen you are using wireless LAN, the wireless LAN is automatically disconnected in this menu. When you go out of this menu, wireless LAN is reconnected.How to use USB memory to transfer user information, log data, and various settings of device. For Administrators -Advanced FunctionslTransfer the user information and various settings from the virtual terminal of USB memory to the connected BioStation. At the same time, transfer the log data from the connected BioStation to thevirtual terminal of USB memory. l[Note] Synchronize menu erases the current user information and various settings of the device and overwrite with the information and settings on USB memory.  lUseful in transferring the data from BioAdmin program to device.lEnabled only when the USB memory has a virtual terminal with thesame device ID as that of the connected BioStation. lCreate a virtual terminal on USB memory with the same device ID.Export the user information, log data, and various settings of the connected device to the virtual terminal on USB memory. lIt may take a few minutes depending on the size of the user information and log data to export. lTo synchronize or import virtual terminal, you need to create a virtual terminal first on the USB memory by using Export VirtualTerminal menu. lThis menu is enabled only when a USB memory is connected to BioStation.SynchronizeExport Virtual TerminalUSB MemorySynchronizeExport Virtual TerminalImport Virtual Terminal Firmware UpgradeInitializeRefresh
59ⒸCopyright 2006 Suprema Inc.USB MemoryHow to use USB memory to transfer user information, log data, and various settings of device. For Administrators -Advanced FunctionslApply the user information and various settings in USB memory tothe connected device. lImport starts by selecting the an ID of the virtual terminals onUSB memory. l[Note] This menu erases the current user information and varioussettings of the device and overwrite with the information and settings on USB memory.  lUsed to transfer the user information and various settings from one device to another.lUseful in periodical back up and restoration of device information. lThis menu is enabled only when the connected USB memory has a virtual terminal. lUpgrade the firmware of the connected device with the firmware file stored on USB memory. lFirmware upgrade starts by selecting one of the firmware files stored on the root directory of USB memory. lUpon finishing the firmware upgrade, device automatically restarts. lThis menu is enabled only when a firmware file exists in the root directory of USB memory. lDelete all virtual terminals on USB memory. lThis menu is enabled only when a USB memory is connected to BioStation.lRefresh the connection of the USB memory and the stored information on the connected USB memory. Import Virtual TerminalFirmware UpgradeInitializeRefreshUSB MemorySynchronizeExport Virtual TerminalImport Virtual Terminal Firmware UpgradeInitializeRefresh
60ⒸCopyright 2007Suprema Inc.For General UsersDescribes directions for general users. It explains how to open a door in each operation mode and to enter T&A events.
61ⒸCopyright 2006 Suprema Inc.Access using 1:N modenWhen 1:N mode is set as AutolIf you enter a fingerprint without pressing any key, a message showing the identification result appears and door is opened.nWhen 1:N mode is set as OK/T&A keylIf you press OK or T/A key, blue LED flickers and a message requesting user’s fingerprint appears on the display.lPlace a finger to open the door.nUse of personal infolWhen personal info image and message are set, the set image and message by successful authentication will be shown. How to open a door using fingerprint when 1:N mode is set as Auto or OK/T&A key. ▼T&AWelcome! Tommy▼T&AAuthentication Place your fingerFor General Users
62ⒸCopyright 2006 Suprema Inc.Access using 1:1 modenIf you press a numeric key, ID input window appears.nEnter your ID and press OK key.nIn case 1:1 mode is set as Fingerprint OnlylEnter a fingerprint to open the door.nIn case 1:1 mode is PIN OnlylEnter your password and press OK key to open the door.nIn case 1:1 mode is set as Fingerprint or PINlYou can either enter a fingerprint or enter password and press OK key. nIn case 1:1 mode is set as RF CardlIf the 1:1 mode is set as Card Only, user can access just by placing the card to BioStation without any additional procedure. lIf the 1:1 mode is not set as Card Only, card is used to suggestthe user’s ID. After putting the card, user should verify himself with fingerprint or password. How to open a door by entering ID first and then entering fingerprint or password.▼T&AUser ID1234For General Users
63ⒸCopyright 2006 Suprema Inc.Access using 1:1 modeHow to open a door by entering ID first and then entering fingerprint or password.▼T&AUser ID1234For General UsersPut the CardCard OnlyEnter passwordEnter user ID or put the cardPassword OnlyPut fingerEnter user ID or put the cardFingerprint OnlyPut finger or enter passwordEnter user ID or put the cardFingerprint or passwordHow to authorizeHow to suggest user ID1:1 verification
64ⒸCopyright 2006 Suprema Inc.T&A event using 1:N modenIf you press F1~F4 key, blue LED flickers and a message requesting user’s fingerprint appears on the display.nIf you place a finger, designated T/A event appears on the display and applies to the user. nIn case that ‘Driven by’on the door relay menu is set as ‘Selected T&A’and that ‘Activate Relay by this Event’is checked on the BioAdmin program, a door opens upon the occurrence of the T&A events.nYou can check on ‘Activate Relay by this Event’in T&A event with BioAdmin program on your PC.How to enter T&A events with fingerprint when 1:N mode is set asAuto or OK/T&A key, and T&A is set as Enabled. ▼T&AT&A: InPlace your finger▼T&AIn: Tommy8/1(Tue) AM 8:00For General Users
65ⒸCopyright 2006 Suprema Inc.T&A event using 1:1 modenIf you press a numeric key, ID input window appears on the display. nEnter your ID and press F1~F4.nIn case 1:1 mode is set as Fingerprint OnlylEnter fingerprint to apply applicable T&A event.nIn case 1:1 mode is set as PIN OnlylEnter your PW and press OK key to apply applicable T&A event.nIn case 1:1 mode is set as Fingerprint or PINlYou can either enter fingerprint or enter password and press OK key. How to enter T&A event by first entering ID and then entering fingerprint or password when T&A is set as enabled.▼T&AUser ID1234For General Users
66ⒸCopyright 2006 Suprema Inc.Using extended T&A eventsnIf you press down navigation key, extended T&A events info appears on the display.nIf you press one of 16keys corresponding to the desired T&A event, next operation starts for the extended T&A event.nFactory default T&A events are defined as below.lF1 (In), F2 (Out), F3 (In duty), F4 (Out duty)nYou can edit the default T&A events and extended T&A events with BioAdmin program on your PC.In case of using 4 or more T&A events, you can use extended T&A events. F4ESC0CALLF3987F2654F1321 In Out In dutyOut duty For General Users
67ⒸCopyright 2006 Suprema Inc.View user’s Access/T&A event recordsnIf you press ESC key on initial screen, a message requesting user fingerprint or password appears on the display.nIf user enter his/her fingerprint or password, access and T&A event records displays as below. nPress up/down navigation key to scroll a log one by one.nPress left/right navigation key to scroll a log page by page (8 logs).nPress OK key to display the latest log.General users can check their own access and T&A event records.Admin fingerprint or master passwordOK ESC▼T&AUser Log: 1234569/14 13:39 Duress (Menu) 1234569/14 13:30 Identify OK (Menu) 11119/14 13:25 Duress (Menu) 1234569/14 12:51 Identify OK (Menu) 11119/14 12:45 Duress (Menu) 1234569/14 12:43 Identify OK (Menu) 11119/14 12:39 Duress (Menu) 1234569/14 12:26 Identify OK (Menu) 1111For General Users
68ⒸCopyright 2006 Suprema Inc.1:1 Mode1:N ModeAuthentication procedure as per operation modeID (Key)fingerprintOK(auth. PW)PW+OK(finger scan)fingerprint(skip in case of Auto setting)OKFor General UsersCard(auth. PW)PW+OK(finger scan)fingerprint(skip in case of card only)
69ⒸCopyright 2006 Suprema Inc.1:1 Mode1:N ModeAuthentication procedure for T&A eventfingerprint(extended T&A event)Down key+16key(default T&A event)F1~F4For General UsersID (Key)(extended T&A event)Down key+16key(default T&A event)F1~F4(auth. PW)PW+OK(finger scan)fingerprint
70ⒸCopyright 2006 Suprema Inc.SpecificationsnCPU : Dual CPU (32 bit RISC + 400MHz DSP)nMemory : 72MB flash + 34MB RAM nDisplay : 2.5 inch QVGA 16 million color LCD nIdentification speed :3,000 fingerprints in 1 secondnFingerprint capacity : 50,000 fingerprint templatesnLog capacity : 500,000 events nHost interface : Wireless LAN (optional), TCP/IP, RS485 nPC interface : USB, RS232nUSB memory slot : USB host n1 relay for deadbolt, EM lock, door strike, or automatic door  nWiegand input/output, 4 TTL input/output nBuilt-in microphone and speaker supporting door phone nConvenient menu navigation keyn4 function keys for user defined functions nOperation mode : Fingerprint, PIN, PIN+Fingerprint,nCard only*, Card+Fingerprint*, Card+PIN* (*RF model only)nRF Card : 125KHz proximity (EM, HID model only), 13.56MHz Mifare(Mifaremodel only)nRTC with backup battery (CR2032)**nProduct size : 135 x 128 x 50 mm (width x length x depth)Appendix** CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERY ACCORDING TO THE INSTRUCTIONS
71ⒸCopyright 2006 Suprema Inc.TroubleshootingnFingerprint can not be read well or it takes too long.lCheck whether a finger or fingerprint sensor is stained with sweat, water, or dustlRetry after wiping off finger and fingerprint sensor with dry towel.lIf a fingerprint is way too dry, blow on the finger and retry.nFingerprint is entered but authorization keeps failing.lCheck whether the user is restricted by door zone or time zone. lInquire of administrator whether the enrolled fingerprint has been deleted frin the device for some reason.lIf message ‘not enrolled ID’appears after ID is entered and OK is pressed, it means that the fingerprint has not been enrolled.nAuthorized but door is not opened.lCheck whether the time is set as lock time. lCheck ‘driven by’on Admin menu. lIn case it is set as disabled or selected T/A events, door may not open.nPartial key can’t be entered or device is unstable.lIn case device is unstable for any reason, enter Admin menu and reset device.nAll keys are not enteredlIf LCD display and blue LED are off, it is possible that power is off. Check power condition such as blackout.lIf LCD display and blue LED are on, something is wrong with machine. In such a case, contact A/S center.Appendix
72ⒸCopyright 2006 Suprema Inc.Device cleaningnWipe out machine surface with dry towel or cloth.nIn case there is dust or impurities on the sensor of the BioStation, wipe off the surface with dry towel.nNote that if the sensor is cleaned by detergent, benzene or thinner, surface is damaged and fingerprint can’t be entered. Appendix
Technical Support & InquirySuprema Inc.16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 KoreaE-mail  :  support@supremainc.comWebsite  :  www.supremainc.comFunctions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.

Navigation menu