Suprema BST2ROC Fingerprint Terminal BioStation T2 User Manual
Suprema Inc. Fingerprint Terminal BioStation T2 Users Manual
Suprema >
Users Manual
www.suprema.co.kr BioStation T2 Innovative Fingerprint Terminal Installation Guide (ver 0.1) Product Contents Basic Contents Product Contents Screw for fixing main body Wall mounting screws and holders - 4 ea Terminal Wall mounting metal bracket Ferrite Core Software CD 12V DC Adaptor Cables ⒸCopyright 2010 Suprema Inc. Product Contents Optional accessories USB fingerprint scanner f or enrollment on PC Wireless LAN Access Point ⒸCopyright 2010 Suprema Inc. Cable and Connector Pinout Relay PIN PIN DESCRIPTION NORMAL OPEN COMMON NORMAL CLOSE RS485 PIN PIN DESCRIPTION TRX TRX + GND SHIELD GND Before Start ⒸCopyright 2010 Suprema Inc. Cable and Connector Pinout PIN PIN DESCRIPTION SWIN_IN0 SWIN_IN1 GND SHIELD_GND SWIN_IN2 SWIN_IN3 GND SHIELD_GND VDP PIN PIN DESCRIPTION VDP_S GND VDP_VCC VDP_V VDP_OPEN GND SHIELD_GND Wiegand PIN PIN DESCRIPTION WIEGAND_D0 WIEGAND_D1 GND SHIELD GND Switch Input Before Start ⒸCopyright 2010 Suprema Inc. Installation Example 8P Cable PC Network HUB Ethernet 3P Cable Door Lock Exit Button USB Firmware Upgrade Only USB ⒸCopyright 2010 Suprema Inc. Product Dimension 160 160 전면 (unit : mm) ⒸCopyright 2010 Suprema Inc. Power Connection Power connection Recommended l 12V ± 10%, at least 1500mA for BioStation T2 alone installation. l Comply with standard IEC/EN 60950-1 ⒸCopyright 2010 Suprema Inc. LAN Connection ⒸCopyright 2010 Suprema Inc. RS485 Network Connection 10 Before Start ⒸCopyright 2010 Suprema Inc. Relay Connection – Fail Safe Lock 11 ⒸCopyright 2010 Suprema Inc. Relay Connection – Fail Secure Lock 12 ⒸCopyright 2010 Suprema Inc. Relay Connection - Automatic Door 13 ⒸCopyright 2010 Suprema Inc. TTL Input Port Connection – RTE Switches 14 ⒸCopyright 2010 Suprema Inc. Wiegand Input Connection – External reader 15 ⒸCopyright 2010 Suprema Inc. System Specifications ● CPU : Main B/D CPU - ARM11 667MHz (Samsung S3C6410-667) X 1ea Sensor B/D CPU - DSP 400MHz (ADI BP531-400) X 1ea ● Memory : Main B/D - Flash : Nand MLC 1GByte + Nor 1MByte, SDRAM(mDDR) : 256MByte Sensor B/D - Flash : SPI 512Kbyte, SDRAM : 32MByte ● DISPLAY : 5inch WVGA TFT LCD (800 X 480) X 1ea ● LED : 3-Color LED X 2ea ● INPUT : 저항막 방식 Touch Screen X 1ea + 5 Keypad (F1~F4, CALL) ● CAMERA : 1.3M CMOS Camera X 1ea ● I/O Port : Wiegand In/Out (S/W 설정을 통해 Input 또는 Output으로 사용가능) X 1ch Switch Input X 4ch RS-485 X 2ch RS-232(Share with RS-485) X 1ch Relay(1A@30Vdc) X 2ch Ethernet(10/100M) X 1ch ● Sound Out: System Sound용 Speaker X 2ea ● RF CARD : Mifare / EM ● Fingerprint Sensor : OC Sensor Model ● Power Input : 12Vdc Adaptor or POE Input 16 기타 ⒸCopyright 2010 Suprema Inc. FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help 17 ⒸCopyright 2010 Suprema Inc. Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 600 1000 VIH (V) VIL (V) 0.8 Pull-up resistance (Ω) 10k VOH (V) @ IOH = -5mA VOL (V) @ IOL = 5mA Output resistance (Ω) 100 Switching capacity (A) 0.3 Switching power (resistive) 30W 37.5VA DC AC Switching voltage (V) 110 125 DC AC Power Voltage (V) Current (mA) TTL/Wiegand Input TTL/Wiegand Output Relay 30V DC 125V AC 18 ⒸCopyright 2010 Suprema Inc. Suprema Inc. 16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 Korea E-mail : support@supremainc.com Website : www.supremainc.com Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Title : BioStation T2 Installation Guide_English.ppt [호환 모드] Author : mclee Creator : pdfFactory Pro www.pdffactory.com Producer : pdfFactory Pro 3.51 (Windows XP Professional Korean) Create Date : 2011:04:04 19:58:39+09:00 Page Count : 19EXIF Metadata provided by EXIF.tools