Sure Wave CQL1430-B iLight Ball Bluetooth Speaker User Manual x

Download:
Mirror Download [FCC.gov]
Document ID	2494810
Application ID	plO7av+q74kv7LvigaL31w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.94kB (36705 bits)
Date Submitted	2015-01-08 00:00:00
Date Available	2015-01-08 00:00:00
Creation Date	2015-01-07 18:06:48
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-01-07 18:06:48
Document Title	Microsoft Word - User Manual.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	D5D4C3C0CFBC

CQL1430-B
Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use.
To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located on the
back of the unit and then plug the USB connecter into the USB port on a computer for
charging.
A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Bluetooth Speaker Operation
Turn on the unit by pushing the switch on the back to
“ “position. A Blue light will
start blinking to indicate the speaker is in paring mode and searching for your
Bluetooth mobile device.
Open the Bluetooth function on your device and search the speaker named “SB-01”.
After selecting this speaker, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flashing
slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10meter) of your
speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Universal Speaker Operation
For other music devices without Bluetooth, turn on the unit by pushing the switch to
“Aux” position, use the included audio input cable, insert the USB jacks into the
“AUX-IN” jack and into the earphone jack on your device.
z Turn on the unit and start playing music.
z Turn off the unit when not in used.
Note: The class of line is one Bifurcation tow, one side is micro USB line, other side are
wide USB line and 3.5mm AUX line, and the USB line is only used for charging.
Color Light Operation
Turn on the color light by pushing the switch to “ON” position
Translucent cabinet changes in 7 colors gradually every 5 seconds.
Turn off the color light by pushing the switch to “OFF” position
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:01:07 18:06:48+08:00
Create Date                     : 2015:01:07 18:06:48+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.docx
Creator                         : 
Document ID                     : uuid:933dc5d1-1295-4465-ac1e-a9151e1344aa
Instance ID                     : uuid:f4048ebd-e0e5-412a-b288-1edb5fd3fcbb
Page Count                      : 2
Author                          : 

EXIF Metadata provided by EXIF.tools