Sure Wave CQL1522-B Bluetooth Speaker User Manual
Sure Wave (HongKong) Limited Bluetooth Speaker
User Manual
CQL1522-B (SBT622) Twins Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speakers
fully before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located at
the back of the units and then plug the USB connector into the USB port on a
computer for charging.
A red light aside will indicate the charging situation. When battery is full, the red
light will turn off automatically.
To Use it as a Pair Speaker
Turn on both units by sliding the switch on the back to ON. The blue indicator
lights of two units will flash quickly.
After 2 seconds, a tone will be heard and the two units will be connected to each
other automatically.
After paired to each other, the indicator light on the main unit will flash quickly
and the sub unit slowly.
Search the Bluetooth speaker device name “SB-04” on your mobile phone,
connect it via the option menu of your mobile device, pairing mode is 0000 if
any is required. The blue light on the main unit will light turn solid blue after the
pair is completed and the blue light on the sub unit will remain flash slowly.
Start playing music on your device. Keep the speakers within 33feet (10m) of
each other. Enjoy your music from both speakers.
Note: the pair speakers cannot be connected to your Bluetooth individually. They
have to work as a pair to be connected with the Bluetooth on your phone.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Turn off the unit when not used.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation