Sutron 6461-1311-1 2.4GHz HP RF Stamp Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2412290
Application ID	L6AQLi7INrC0W9pJ8Jq6aw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.81kB (260179 bits)
Date Submitted	2014-10-07 00:00:00
Date Available	2014-10-07 00:00:00
Creation Date	2014-10-06 11:04:10
Producing Software	Microsoft® Word 2010
Document Lastmod	2014-10-06 11:05:25
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Rick McMurray

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix M:
Client: Sutron Corp.
Model #: 6461-1311-1
Standards: FCC 15.247/IC RSS-210
ID’s: HDB-6461-1311-1/1088A-646113111
Report #: 2014075
Manual
Please refer to the following pages.
Page 46 of 57
USER MANUAL
Model# 6461-1311-1
DESCRIPTION
6461-1311-1 has a microcontroller, an RF transceiver, an RF amplifier and a flash memory chip. The
differential output of the transceiver is fed to a balun and then to an RF amplifier, Low pass filter and
finally to a coaxial connector.
The microcontroller runs a network stack that supports various commands for setting the RF channel
and transmits power. The network stack periodically turns on the receiver to sniff for incoming packets.
REGULATORY INFORMATION
The 6461-1311-1 module has been designed to operate with the antenna listed below and having a
maximum gain of 3.2 dBi. The required antenna impedance is 50 ohms.
Part Number
ANT-2.4-CW-HW
Mfg
Antenna factor
Type
Omni
Gain(dBi)
3.2
The OEM is free to choose another vendor’s antenna of like type and equal or lesser gain as an antenna
appearing in the table and still maintain compliance. Reference FCC Part 15.204(c)(4) for further
information on this topic.
The recommended separation distance for this equipment is 20 cm.
To reduce potential radio interference to other users, the antenna type and gain should be chosen so
that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful
communication.
Changes or modifications not expressly approved by Sutron Corporation could void the user’s authority
to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
OEM Responsibilities
WARNING: The OEM must ensure that FCC and IC labeling requirements are met. This includes a clearly
visible label on the outside of the OEM enclosure specifying the appropriate FCC/IC identifiers for this
product as well as the FCC notice below.
Note: Contains FCC ID: HDB-6461-1311-1
IC: 1088A-646113111
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Label and text information should be in a size of type large enough to be readily legible, consistent with
the dimensions of the equipment and the label. However, the type size for the text is not required to be
larger than eight pt

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Rick McMurray
Create Date                     : 2014:10:06 11:04:10-07:00
Modify Date                     : 2014:10:06 11:05:25-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:10:06 11:05:25-07:00
Creator Tool                    : Microsoft® Word 2010
Format                          : application/pdf
Creator                         : Rick McMurray
Document ID                     : uuid:39508f3d-c434-46cb-9a6b-3441b3bdd16d
Instance ID                     : uuid:cfd7337c-349b-4606-9380-06ca0a7655cb
Producer                        : Microsoft® Word 2010
Page Count                      : 4

EXIF Metadata provided by EXIF.tools