Suzhou Sate Auto Electronic TPMS1209W TIRE PRESSURE MONITORING SYSTEM User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	706163
Application ID	9Ntl8Gb+DMoTemXwCu/LSQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.08kB (751019 bits)
Date Submitted	2006-09-19 00:00:00
Date Available	2006-09-19 00:00:00
Creation Date	2006-09-14 10:55:42
Producing Software	Adobe Acrobat 7.08 Image Conversion Plug-in
Document Lastmod	2006-09-14 10:57:52
Document Title	USERS MANUAL
Document Creator	Adobe Acrobat 7.08

letlee
1.Ptaaaedoreedttiistlaauaiesratultybslere-usingthapreduet.
zThesystsmeanraonlterthetlra eflecttiraly.butdeeariotwsn'ent
teavald anystiedariassldaats. aheuldutlilasthasystsntte
ensurethetlratabeesediaiderestandsrdpreaatae andsvotdualngthe
peoroualttyorbadtyebiedad tires.
SUsuaerenotsilowadtaeparuepsiaadrsfltdwpreduatbymaaaetna:
etlieiwlaethe aervloewitlbelavafid.
4.i.lsarsmudfiltthe caveman-immunisation:
malntainlngMoen rightsandlntsresh.
again-asiumeimmsnmammwsmmw
SSiT
ssrwusrzoswor Full-time Direct TPMS --------------------------- - ------- 1
Parts of TPMS‘I209W01----------------------—~---------------------------1
Security sheath ---------- -
Function and Operation -------------
Master's Auto-switch Mode Function~~
High Pressure Alarm
Low Pressure Level 1 Alerrn--—- -
Low Pressure Level 2 Alarm-—
Low Pressure Level 3 Alarm-mmm
.............. ..........................................5
Quick Leakage Alarm------—-~ ........-......................_...............-...........5
Sensor Trouble Alarm —-»---------.....--.-..-.-............-................ ...... ....5
Low Battery Alerm—-—--—----—----—- ---—----—---—------ —-—---——--—------—--—5
Standard Pressure programming------------—----—-—----—--------------—-----—--------8
Alert Record Enqulry-----—--—--«-—-—--—---—--—--------—--—-------—----------——------6
System Time Enquiry------—-----m-«~-~---mmmm»----------------------m-7
Pressure Unit Switch--—--—---------—-—..--——----......._......_............__....7
Specification ----------------------------------------------------------------------------------- 8
Warranty Term—----——-----—--—---—----—-—-----—----—-----------—-—-----------—-—---9
Valid Warranty Card............................................................... mmmmmmmm 9
Warranty Condition. Responsibility and Limitetion-—---~—-~-—-—---- 9
Important Notes---—-—---—--—-------—----~—--—----—--—~---------—-----—-—--—------—------9
SSiT
Operating Temperature of the Master 3203-450?
Operating Temperature of the Sensor:-4OC~085C
Pressure Scale of the Sensor:0~6.0barIO-87psl
Accuracy for Pressure Measurementztf .5psi
Modulation TypezFSK
RF Frequency: 434.1 Mb:
Emission Output Power:-1D~0 dbm
Receiving Sensitivity: -105d8m
input Voltage:4.3v (Cigarette lighteradapter)
1.2x3v(rechargeable battery group)
SGiT
Pressure
Pressure Unit. Psi
Tire Position
Pressure Unlt,Bar
Spare Tire Sensor TreubieAiarm icon
High PressureAlarm icon Battery Power Icon
Time
Pressure Alarm Icon Quick LeaksgsAlanri icon
Level of Low PressureAiarrn Icon
SSiT
MASTER
Put three piecesol rechargeable batteriesinto the battery box on thebacli of the Master. fix
the master onthe platform witha mushroom-shape dintariocking stem. Turn on theMaster
and the Masterstarts to work.The screen displaysthe pressure ofthe four tires in turn.
At this timethe pressure unitshown on thescreen is-o- Bar.
The Master also can be powered by the cigarettelighter through especial plug witha
transformer inside.
Notice: Some vehicles“ cigarette lighter willpower off whenthe key is pulled out. lfthe
master powered only by the cigarette lighter, ltwiil not receiveany information while the
vehicle is parking.
SSiT
Standard Pressure Programming
Press the E key for morethan 3 secondsto access themenu interface. the
interface number shownon the iowernght corner is '1" . as shown In figure
6—1. Press E key to access Tire StandardPressure Enquiry and Programming
interface. as shownin figure 6-2. Press Skey to choosetira position. then
press E keyto access the standard pressure programminginterfaca. The first
digit of tire pressure flashes asshown in figures-3. Press Skey to adiustthe
number and pressE key toconflrm it. Thenthe second digitfleshes. repeat
the above stepsto detlfl the number and confirmit. Then the third digit.
Press E keyagain to lockthe adjusted pressure value. Press Skey to setthe
other tires. When screen displays the spare his. the lower right cornerof the
screen appearing asE. as shownin figure 64. Press Ekey to axilTire Standard
Pressure Enquiry and Programrning interface and back to menu interface.
Then press Skey to shiftthe digital atttie lower rigntcorner lo letterE.
Figures-Z Press E keyto bring thedisplay back to normal mode.
Figure -3 Iigure ll Figure 6~5 Ilgura GI Figure 6]
Alert Record Inqulry Punctloa
Figure 6-1
' Press the Ekey for morethan 2 secondsto access the menu interface. the
interface number onthe lower rightercorner is '1' . shift the interface number
m to '2' by S key. as shown in figure 6-5.
Press E keyto enter the Alert Record Enquiry interface. Thefigure '1' on the
P screen means thisis the latest alert record .as shown infigure 6-8 Press E
the time whenthe alarm issuedwill appear onthe screen. whichincludes year!
month/date Ihour lminute. For exampiezthe time showu in figure 8-5is 21:00.
Feb 10“ .2006.and the systemissuad a Iowpressure alarm torthe front lel‘llire.
The pressure veiueis 2.0 Bar. Press Skey to shiftto the nextaiemi record. as
shown in figures—9.Press E .the screen willdisplay the nextrecord. Afterall
records are chacked.the letter E will appear onthe lower right corner of the
screen. Press Eliey to asltAlei-t RecordEnquiry and backto the manuiriterface.
Then press Skay to shifttha interface numberon the lowerright corner toE.
Figure 6-8
sci)
USER MANUAL
1' P M s 1 2 o a w
FCC IDzTTETPMS1209W
SST
Valid Warranty Card
1. The Warranty Card mustbe filled completely. signed bythe user and sealed by the
authorized distributors ofSate.
2. The Vibrranty Card isvaiid in thecountfy or region where the purchaseis occurred.
3. The Warranty service requiresuser to offer the WarrantyCard.
Warranty Condition, Responsibility and Limitation
t. The productwarranty period isone year andls subject tothe time marked on the invoice.
2. Anydamages or faults due to improperuse are notinvolved in thewerranty commitment.
3. Users are not allowed to open. repair and refit the productsby themselves: otherwisethe
warranty service will be invalid.
4. The warrantydoes not includereplacement of theenolosure and dlsplaypanel.
5. The werrentydoes not coverthe product damagedue to abrasionor corrosion.
important Notes
1. The Warranty Card mustbe filled completelyand its numbershail be quetedwhenever
the user requiresthe service.
3. Please informSate in casethat the telephonenumber or addresson the Vibrranty Card
are changed.
4.The warranty responsibllityis subject tothe conditions and limitations specified inthe User
Manual.
S&T
TPMS1209W01 is a full-time direct tire pressure monitoring systemwhich includes one Master
and four Sensors.The Sensor canbe screwed onthe tlre insteadof the capof the vslveto sense
the pressure ofthe tire allthe time andtransmit the detato the Masterthrough RF. The datewlil
be dealt with by the mesterand then beshown on thescrean.Then the masterwill issue different
slams according to the standard pressure.
SET TPMSt209WO‘l can inform the tire pressure conditionof the vehlcleto the drivertimely
so as toavoid tire busting or tire damegeand it can also reduce gasolineconsumptlon.
S &T
MASTER
Cover of
Display Battery Box
select Key Em“ “'V Power Switch
Alarm “mp Power Socket
SENSOR AND SECURITY SHEATH
-— Body of Security Sheath
f — — Boll
Bottom of Security Sheath ‘—
SSiT
System Time Inqulry
Press the E key for morethan 2 sacondsto access themenu interface, the
interface number appaaringon the lowercorner on the right is " t " . Shift
the interface numberto '3" by S key. as shownin figure 7-1.
Press E keyto access the system time enquiryintarface. yearlmonthldatel
hour Imlnute willappear on thedlspiay here. Forexempie: the systemtlme
shown on thefigure 1-2 lS21200 on Feb 10th.2006.
Press E keyto exit thesystem time enquiryinterface and backto the
menu interface. Then press 8 keyto shift thelnter'lace number to 'E' .
press E keyagain will bring the system backto the normal mode.
Figure 7-t
Figure 7-2
Praseare “all Switch
The system provides 2pressure units - " Bar” and 'Psi' . Users can
choose the unites following:
Press the E key for morethan 2 secondato access the menu interface.
shift the interface number on theiower right cornerfrom 't' to " 5” by
the 8 key. as shownin figure 7-3.
Press E keyto access the Pressure Unit Switch interface. The upperright
corner displays 'Bar' at first. Preass key toshitt the pressureunit to
" Psi“ as shown infigure 7-4.
Press E keyto confirm the pressure unit shownon the displayand exit
the Pressure UnitSwitch Interface. Then press S keyto shift the
interface number toE. press Eagaln will bringthe system backto
normal mode.
Figure 70
Figure 7-4
SGtT
Inflate the tire to the standard pressure. screw thesensor onto
the valve according to the position label. sensor can sense the
pressure of thetlre and transmit the data tothe Master.
Notice: The currenttire pressure wliibe programmed tobe the
standard pressure bysensor once itscrewed onto thevaive. So it
must be ensured that the current pressure is thestanderd
pressure. The standard pressure can beobtained from the
vehicle User Manuai.the cover ofthe gasoline tanker the inner
side of the door for driver.
After sensor installation. please wait looseconds before you
move the vehicle.
Note : Please checkeach sensor withsoap solution toconflrm It's
firmly screwed ontothe valve andthere is noair leakage caused
by the installationor the sealof the sensor.
0—64
vac-Ba
Security Sheath
key. inedispley will show the mode ofalarm as shownin figure 6-7. Press S key.
Put the sensorinto the bodyof the securitysheath and coverthe bottom of
the security sheath.Keep the boltout of thesocket . leithe sensor fit the
bottom of the security sheath and mesh together.as shown down In picture
2..screw on thesensor with asheath onto the valve. Then putdown the
sheath let theinner roof ofthe sheath touchthe sensor to separate the
meshing bottom. screwon the boittlghtly by a special tool. asshown down
In picture 3.Then anyone cannot screw offthe sensor togetherwlih the
sheath without a special tooI.The function of the boitis to prevent the
sensor bottom tomesh the sheath bottom. this can let the sheath in a loose
running while thesensor remains onthe valve. thus the sensor can not
be stolen orbe screwed off by a suddenlorce while running.
Note: The tires needto be re-balanced after installing the sensors and
the sheathes.
Figure 6-9
Press E keyto bring thesyatem back tothe normal mode.
4.
SPECIFIC lNFORMATlON OF THE SECURITY SHEATH WORKING ENVIORNMENT OFTHE BATTERY CHARGER
This product providesa security foreach sensor. Asecurlty sheath lnciudesa
body .a bottoms bolt anda special tool for the bolt.as shown downin figure Hi
can prevent thesensor being removed from the valveeasiiy without thespeclai
tool.
....._.
_. —Solt
l—IMoftheM
Figure 1
Operating temperaturez-to
Operating humidity:
Storage temperature:
Storage humidity:
Vibration resistance:
.— Sedyofthaahaath Impact resistance:
Who!"
I!”
Before inflating thetire, user shouidloose the screw on the sheathby the special
tool and then screw off thesensor together with the security sheath.
Note :The sheathes wllInot influence thework of thesensors. you canchoose
using the sheaihasor not whileyou installing thesystem.
”We? disappear—risiaxc'flllmt'lfl
Sfifll.
-’ Figure 3
SGiT
Aato-Swltch Mode of Master
Tosave the batterypower. theMaster can switchto the sleepymode automatically ifthe
vehicle parka morethan 10 minutes.
Under this mode. no information displays on the screenif the pressure is under astandard
condition. If thetlre pressure is25% lower than standard pressure. themaster can receivethe
warning alarm within? minutes and issue the aiert.The Master can switch to thenormal mode
automatically when thevehicle starts orsny key is pressed. In normalmode the Mastercan
receive the updated data from Senaorsin time andissue the warningalarm Immediately.
lllgh Praseare Marat
Function: The systemwiii Issue angh-Pressure Alertwhen the air
pressure is 2596 higher than the standard.
Alert Mode: Theelarrn lamp. HighPressure Warning Icon and theaudible
alarm turn ontogether.
‘ Treatment: Presathe 8 key to stop theaudible alarm. Thealarm lamp
remains on andthe display revertsto the normalmode. The redelarm lamp
goes off only when the tire pressure reaches normal.
Low Pressure Level 1 Alarm
Function: The systemwiii issue aLow Pressure Levelt Alertwhen the air
pressure is 12.596lower than thestandard.
Alert Mode: Theaiarm lamp. Low Pressure Warning Icon and theaudible
alarm turn on together.
Treatment: Pressthe 8 key to stop theaudible alarm. Thealarrn lamp
remains on andthe display revertsto the normalmode. The redalarm lamp
goes off onlywhen the tire pressure reaches normal.
Low Pressure laval 2AIarm
Function: The system will Issue aLow Pressure Levei2 Alertwhen the air
pressure Is 2596 lower than thestandard.
Alert Mode: Theaiarm lamp. LowPressure Warning Icon and theaudible
alarm turn on together.
Treatment: Press the 8 key to stop theaudible alarm. Thealsrm lamp
remains on andthe display revertsto the normalmode. The redelarm lamp
goes off onlywhen the tire pressure reaches normal.
FCC Caution
This device complies with Part 15 ofthe FCC Rules Operation is subject to the
following two conditions:
(1) this deVice may not cause harmful interference, and (2) this devrce must
accept any interference received, including interference that may cause undesired
operation.
FCC Notes:
The manufacturer is not responstble for and radio or TV interference caused by
unauthorized modifications to this equipment Such modifications could void the
user's authority to operate the equip ment,
S&T
Low Praseare Level 3 Alarm
Function: The systemwiii issue aLowPressure Level 3Aler1 when the air
pressure is Stilt-lower than the standard.
Alert Mode: Theelarm lamp. LowPressure Warning icon and theaudible
alarm turn on together.
Treatment: Press the S keyto stop theaudible alarm. Thealarm lamp
remains on and the display revertsto the normalmode. The redelarm lamp
goes off onlyWhen the tire pressure reaches normal.
Galolt leakage Alarm
Function: The systemwiii issue aOuick Leakage Alert when thepressure
difference exceeds 0.208arwithin 12 seconds.
Alert Mode: Thealarm lamp andthe audible aiarmturn on. thalaaking tire
indicator flashes continuously.
Treatment: Pressthe S key to stop theaudible alarm and resume the
rotational displaying. Slow down the carimmediately and stopet a safe
place to inapectthe tire. Onlywhen the leaking tire is repairedand fixed
again, the alarm lamp turns otfautometicelly.
Seaeor Trouble Alarm
Function: When one Sensor falls to work. or the Master can‘t receivethe
data because ofthe RF lnterlerencefor a longtime. the systemwiii issue a
SensorTrouble Alarm.
Alert Mode: The red alarm iamp.the Sensor Trouble Alarm Icon and the
audible alarm turn on together.
Treatment: Presstha 8 key to stop theaudible alarm. Thered alarm lamp
goes off onlyWhen the tlrepressure reaches normal.
Warning for Level-nary Power
Function: The systemwiii issue awarning alarm whenthe battery poweris
not enough tosfford the Masterto work.
Alert Mode: The red alarm lamp.
Treetmerit: Changethe batteries orconnect to thecigarette lighter adapter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:09:14 10:57:52-04:00
Create Date                     : 2006:09:14 10:55:42-04:00
Metadata Date                   : 2006:09:14 10:57:52-04:00
Creator Tool                    : Adobe Acrobat 7.08
Format                          : application/pdf
Document ID                     : uuid:5692c609-2e17-4f6c-81db-11e86f45a029
Instance ID                     : uuid:fff71063-6eb6-4874-a3b5-6243f93715f1
Producer                        : Adobe Acrobat 7.08 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 7.08

EXIF Metadata provided by EXIF.tools