Suzhou Sate Auto Electronic TSB52 Tire Pressure Monitoring System Sensor User Manual TSB52 User manual

Download:
Mirror Download [FCC.gov]
Document ID	4116006
Application ID	nniwGgpkxcen5r95iLIRBA==
Document Description	TSB52_User-manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.63kB (645338 bits)
Date Submitted	2018-12-25 00:00:00
Date Available	2018-12-26 00:00:00
Creation Date	2018-12-21 06:02:50
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-12-21 06:02:50
Document Title	TSB52_User-manual
Document Creator	Microsoft® Office Word 2007
Document Author:	Administrator

User manual
1. General Description
Tire pressure sensor is composed of RF chip, battery, antenna and Rf
matching network. It is applied to monitor tire pressure, temperature and
acceleration and the tire data is transmitted via center frequency 433.92MHz.
2. Operation Functions
Transmitter ID Programming: transmitter ID can be programmed for easy
replacement
Alarm Record Inquity: automatically record the 10 alarm records
Standard Pressure Programming: standard pressure for each tire can be
programmed on monitor
3. Product Features
Powerful functions including low pressure alarms in 3 levels, fast leak alarm
and standard pressure setting etc.
Monitor connects to continuous power to ensure full-time monitoring
Design of the whole system matches the rtuck perfectly
Simple operation for function programming and inquiry
4. Installing structure
TPMS Sensor
5. Installation requirements
User manual
moment:3.8N.m(±0.3N)
Tires must do dynamic balance testing and adjusting.
User manual
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.
User manual
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device
Le present appareil est conforme aux CNR d’Industrie Canada applicable aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme
si le brouillage est susceptible d’en compromettre le fonctionnement.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnement non contrôlé.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Administrator
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2018:12:21 06:02:50
Modify Date                     : 2018:12:21 06:02:50
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools