Swann Communications SWADS-466CAM IP CAMERA User Manual out

Download:
Mirror Download [FCC.gov]
Document ID	2296222
Application ID	O9HrMRMDBMXA1vfqX40cbQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	417.88kB (5223539 bits)
Date Submitted	2014-06-16 00:00:00
Date Available	2014-06-16 00:00:00
Creation Date	2014-06-12 18:55:21
Producing Software	ImageMagick 6.6.9-7 2014-03-06 Q16 http://www.imagemagick.org
Document Lastmod	2014-06-12 18:55:21
Document Title	out

QSCLDUD'ISOI 135 I O Swarm 20M ‘fim
nun-alw-
The SwannCloud Mobile App
Have a Smartphone or Tablet? With the free Swan-
nCloud app. you can turn your iOS or Android mobile
device into a monitoring centre for your camera. Have
the peace of mind that you can monitor your home
at any time from any place. With "SwannLink" Peer
to Peer technology, connecting your mobile device
to your camera is so easy — there's no need to fiddle
around with complicated network configurations. Best
of all. it only takes minutes to get it up and running!
cam“ muw
..
I at ay
After creating your user account. you will see the
screen shown above. You’re now ready to add your
camera.
fiil
Hm- . nym wall Iunnu: H:l mym
camera?
:5» law-m
' ‘ mm
Cortirun
Tap "Camera" then lap
"+" to add your camera.
Select how you would
like to have the camera
connected. If you se«
lect "Wired". you will be
taken directly to the QR
code [step lo]. If you se-
lect "Wired" or "Both".
you will be requested lo
input the password for
your Wi
mm, mm a. ,
The default values
will work in most
environments. but you
can adjust it according
toyourneeds.
Tap the return button on
your mobile device or
tap "Home” to exit.
Camera Settings: Event Delay
Tap "Camera". tap the name of your camera. tap the
camera settings button. To adjust the delay time be-
tween events. tap ”Video Analytics Settings“ then
"Event Delay".
m This will adjust the delay
Emma.” time between events.
a Adjust it according to
| warm...
yourneeds.
3' mu Tap the return button on
D —. ‘I your mobile device or
tap "Home” to exit.
QSH_46eCAM20021I.E I © Swann 2014 awn
.. -
Getting to know your Camera
Congratulations on the purchase of your SwannCloud camera. This quick start guide will assist you on
getting your camera up and running as soon as possible. We recommend that you connect everything and
give it a try before you do a permanent installation. to make sure nothing was damaged during shipping.
A] IR [Infrared] LEDs — The camera will use
these in low—light conditions to generate
a black and white image, even in total
darkness.
8] Light Sensor — Detects the amount of
light available and turns on the IR LEDs
when necessary.
C] Locking Ring — Loosening the locking
ring will allow you to rotate the barrel of
the camera. so no matter what direction it
faces. you can spin the camera so that your
images are correctly oriented.
To remove the protective cover,
use a Phillips—head screwdriver to
unscrew the screw located at the top
of the camera.
A] Power Socket - Connect the power
adapter here.
8] RJ45 [Ethernet] - Forawired connection,
connect this to a spare port on your router.
ClAlarm l/O Block— For connecting external
alarms and sensors.
Remove each rubber cap and unscrew
to gain access to the Micro-SD Card slot.
There are three in total.
A] Wi-Fi Antenna — The included Wi-Fi
antenna connects here.
B] Reset - When pressed and held for
more than 10 seconds when the power is
disconnected and reconnected. all settings
will revert to the factory defaults.
C] Microphone — Located at the bottom, it
allows the camera to hear nearby sounds
and stream them with the video.
Gently pull the camera apart to reveal
the Micro—SD Card slot. Inserting a
Micro—SD card allows you to capture
a series of snapshots and video files
directly to the card, as well as setting
an alarm schedule so it records
when it has detected motion. This
is optional and is recommended for
advanced users only.
C Connecting the Camera Network LAN Connection [optional]
Even though this camera primarily connects to your home network wirelessly, it can also connect to
your router using the supplied LAN cable. The main advantage ofa LAN connection is that you don't get
disconnections or dropouts as you would with a wireless connection.
Now connect the
supplied power adapter
to the power input on
the camera.
Firstthing to do isto screw the provided
Wi-Fi antenna into the antenna socket
located on the camera. Use a clockwise
motion to connect. It is recommended
to leave the antenna in a vertical
position for best reception.
oscwuorsorrae I o Swann 2014 éflaan
The SwannCloud Mobile App
Have a Smartphone or Tablet? With the free SwannCloud app. you can turn your iOS or Android
mobile device into a monitoring centre foryour camera. Have the peace of mind that you can mon-
itor your home at any time from any place. With "SwannLink" Peer to Peer technology. connecting
your mobile device to your camera is so easy - there's no need to fiddle around with complicated
network configurations. Best of all. it only takes minutes to get it up and running!
To download the SwannCloud app, go to your relevant app
store and type in the following — “SwannCloud” for Handsets
and Tablets. Follow the on—screen instructions for installa—
tion and accept any license requirements that may appear.
After downloading and installing SwannCloud
onto your Handset or Tablet. locate the app
and tap the icon to run.
9 The screenshots used on this page are
from the Android version of SwannCloud. The
functions, buttons and overall look and feel
are identical for the iOS version. The app is
continually being tweaked and improved, so
the following screenshots may differ slightly.
Add Camera
How do you want to connect to your
camera?
‘3) Wireless
Q wired
Ll Both
Contrnue
Select how you would
like to have the cam—
era connected. If you se—
lect "Wired", you will be
taken directly to the QR
code [step 9]. If you select
"Wired" or "Both", you will
be requested to input the
password for your Wi—Fi
network. Tap "Continue".
Camera Settings
riierrer 3| tiieiirr' LIE:
Carriera Name
About Ca'rrera
[war i.i'rE‘iiliil,.5
Motion Deleclor
lrIlrusrcri Detector .
Camera lamncr D
Face Detector D
Video Analytics Settings >0
PIR m
Alarm in ‘
Offirrre Detector m
‘u'rl‘e’o Bellrr‘qs.
Live Streaming )0
Cloud Storage >®
lr'rage malty )0
Add Carr‘iera
Enter password for netwcrk
WirFr Router
i:i Show Password
Continue
Place OR code 4'56" in front oi the
camera
Input the password for
your Wi—Fi network then
tap "Continue". A QR code
will appear, this contains
all the network settings.
lap "done" once your camera LED rapidly
blinks,
Hold your mobile device
towards the camera lens
to scanthe QR code.When
you hear a short beep
beep, tap "Done" to finish.
Camera Settings
1. Tap this to give the camera a
relevant name.
2. If there is an update available.
you will be notified when you start
the app.
3. Motion detection will be ena-
bled by default.
4. Slide this to the ON position to
enable intrusion detection.
5. Slide this to the ON position to
enable camera tampering.
6. Slide this to the ON position to
enable face detection.
7. Tap this to change settings for
sensitivity, to change the motion
detection area. and to set the in-
trusion direction.
8. Tap this to enable the PIR sen-
sor on the camera.
9. Slide this to the ON position if
you are connecting an alarm to
the camera.
10. Slide this to the ON position
if you would like the app to alert
you ifthe camera is no longer be-
ing detected.
11. Tap this to change video set-
tings for live view. Adjusting the
frame rate and bit rate may help
if you're having problems when
viewing a live stream.
12. Tap this to change video set—
tings for cloud storage. All events
are saved to the cloud and not on
your mobile device.
13. Tap this to adjust brightness,
contrast, sharpness and satura-
tion.
9 Please have a look at the user
manual for more information.
Welcome
to SwannCloud
please log In or create an accour't
chin
i-orovt P‘asswo’c (.7231? Mount
Tap "Create Account" to
create a new account.
Or cafe Acmr int
Create Account
Cr r‘va'e Acrmrr‘rt
John
Sr‘ril'r
your@emailaddress.com
your@emailaddress.:om
Create
Temporary Password will be Emailed
Wlliilil bmanVJS
|nputyourfirstname,sur—
name and email address.
Tap "Create" to send a
temporary password to
your email address.
Using SwannCloud
Account Validatior
Done
if temporary password was not received
within 5 minutes, please verify e-mail
address and check spam folder.
Check your email, you
should have received your
temporary password.
Wow, that was easy! Start getting yourself familiar with the controls and impress your family and
friends. A description of the various buttons and functions can be found below.
fiSWarir‘rCltrrrri
Living Room
01/09/2014
i .11 hill-“ell rrr spc
Living Room
01/09/2014
rover-rm iris.—
53
Event Today
Camera Offline
1. SwannCloud will always dis-
play the last two events that
have occurred on the home
screen.
2. This displays how many
events have occurred in total
and for the day. Events occur
whenever motion or an intru-
sion has occurred. Tap this to
go to events.
3. This displays the amount of
cameras that have been reg-
istered to your account. It also
displays if a camera is offline.
Tap this to go to the camera list.
4. Tap this to go to the home
screen.
5. Tap this to access the event
screen. Each event is recorded
as a 10 second video file.
6. Tap this to access the cam—
era list. Tap a camera to view a
live stream.
7. Tap this to access your pro—
file, to log out of the app, to ac-
cess the user manual and to
contact Swann Help Desk.
9 The PTZ function requires a PTZ camera to be connected.
Use the volume buttons on your mobile device to increase or de—
crease the volume level.
Fvenis (”31 £3)
Living Room
, 9'33-24 AMI Miser
. . ")
Lrvrng Room
Living Room
. . .9:32:11AM|ro:e:
Living Room
The event icons represent
the type of event that has
occurred.
03/04/2014lozo r AM
, 9:31'49 AMI row M” Ma?
Fverrf Details:
Share Live Vldeo
Each event that occurs is
10 seconds long. This is the
maximum length.
Viewing Events
To view an event that has occurred,
tap the "Event" button. All events that
have occurred to date will appear.
Scroll up or down to find the event that
you would like to play. When you have
selected an event, it will automatically
play. To select a different event tap the
"Home" button then tap the "Event"
button again.
1. Tapthis to pause playback. Tap again
to resume playback.
2. Tap to mark this particular event.
Marking an event will prevent it from
being deleted. A red pin icon will ap—
pear on events that are marked.
3. Tap this to delete the event.
4. Tap this to share the event with oth—
er apps on your device, e.g. email or
saving to a new location.
5. Tap this to view a live stream from
the camera.
Acccunl Validation
HXKNUM
If temporary password was not received
within 5 minutes, please verify email
address and check spam folder.
Inputthetemporarypass-
word [which is case sen—
sitive], input a new pass-
word and again to confirm,
then tap "Done".
Status Icons
This icon repre-
sents that an in—
trusion has oc—
curred.
This icon repre—
sents someone
has tampered
with the camera.
This icon repre—
sents an alarm
event has oc-
curred.
This icon repre—
sents that mo-
tion detection
has occurred.
fiSwannClorrd
. Event
. Camera
After a short moment,
your account will be cre—
ated.
Rich: Vision
Living Room
Hum 38
Live View
Today
Offline
Tap "Camera" then tap
"+” to add your camera.
Viewing your Camera
To view a live stream from your cam—
era, tap the "Camera" button then tap
the name of the camera.
1. Tap this to enter camera settings.
This will be covered in greater detail
in the user manual that is available on
our web site [www.swann.com.au].
2. Tap this to turn night vision on or off
or to leave it on auto.
3.Tap thisto controla pan & tilt camera
[only available on the ADS—446 model].
4. Tap this to take a snapshot of the live
video stream. Snapshots are stored lo—
cally on your mobile device.
9 To view a full image of the video
stream, tilt your mobile device hori—
zontally.
My Account
“@00
This icon rep-
resents motion
detected by the
PIR sensor.
This icon repre-
sents that facial
detection has
occurred.
This icon repre-
sents that the
camera is of-
fline.
This pin icon
will appear on
events that have
been marked.
9 To playback an event full screen, tilt your mobile
device horizontally. Events that haven't been played
will be displayed in bold on the events list.
fiSwannCloud
90
Profile Log Out
My Account
00.
Help Phone Emarl
Suppon
Tap "More" to access your pro—
file. You can update your account
name, change password or logout
of the app. You can also access the
user manual and contact Swann
Help Desk.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Title                           : out
Create Date                     : 2014:06:12 18:55:21
Modify Date                     : 2014:06:12 18:55:21
Producer                        : ImageMagick 6.6.9-7 2014-03-06 Q16 http://www.imagemagick.org
Page Count                      : 13

EXIF Metadata provided by EXIF.tools